| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Copyright 2016 Freescale Semiconductor, Inc. |
| * Copyright 2017-2018 NXP. |
| * |
| */ |
| |
| #include <dt-bindings/clock/imx6sll-clock.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include "imx6sll-pinfunc.h" |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| gpio4 = &gpio5; |
| gpio5 = &gpio6; |
| i2c0 = &i2c1; |
| i2c1 = &i2c2; |
| i2c2 = &i2c3; |
| mmc0 = &usdhc1; |
| mmc1 = &usdhc2; |
| mmc2 = &usdhc3; |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| serial3 = &uart4; |
| serial4 = &uart5; |
| spi0 = &ecspi1; |
| spi1 = &ecspi2; |
| spi3 = &ecspi3; |
| spi4 = &ecspi4; |
| usb0 = &usbotg1; |
| usb1 = &usbotg2; |
| usbphy0 = &usbphy1; |
| usbphy1 = &usbphy2; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <0>; |
| next-level-cache = <&L2>; |
| operating-points = < |
| /* kHz uV */ |
| 996000 1275000 |
| 792000 1175000 |
| 396000 1075000 |
| 198000 975000 |
| >; |
| fsl,soc-operating-points = < |
| /* ARM kHz SOC-PU uV */ |
| 996000 1175000 |
| 792000 1175000 |
| 396000 1175000 |
| 198000 1175000 |
| >; |
| clock-latency = <61036>; /* two CLK32 periods */ |
| #cooling-cells = <2>; |
| clocks = <&clks IMX6SLL_CLK_ARM>, |
| <&clks IMX6SLL_CLK_PLL2_PFD2>, |
| <&clks IMX6SLL_CLK_STEP>, |
| <&clks IMX6SLL_CLK_PLL1_SW>, |
| <&clks IMX6SLL_CLK_PLL1_SYS>; |
| clock-names = "arm", "pll2_pfd2_396m", "step", |
| "pll1_sw", "pll1_sys"; |
| nvmem-cells = <&cpu_speed_grade>; |
| nvmem-cell-names = "speed_grade"; |
| }; |
| }; |
| |
| ckil: clock-ckil { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "ckil"; |
| }; |
| |
| osc: clock-osc-24m { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc"; |
| }; |
| |
| ipp_di0: clock-ipp-di0 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| clock-output-names = "ipp_di0"; |
| }; |
| |
| ipp_di1: clock-ipp-di1 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| clock-output-names = "ipp_di1"; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&gpc>; |
| ranges; |
| |
| ocram: sram@900000 { |
| compatible = "mmio-sram"; |
| reg = <0x00900000 0x20000>; |
| }; |
| |
| intc: interrupt-controller@a01000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x00a01000 0x1000>, |
| <0x00a00100 0x100>; |
| interrupt-parent = <&intc>; |
| }; |
| |
| L2: cache-controller@a02000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x00a02000 0x1000>; |
| interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| cache-unified; |
| cache-level = <2>; |
| arm,tag-latency = <4 2 3>; |
| arm,data-latency = <4 2 3>; |
| }; |
| |
| aips1: bus@2000000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x02000000 0x100000>; |
| ranges; |
| |
| spba: spba-bus@2000000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x02000000 0x40000>; |
| ranges; |
| |
| spdif: spdif@2004000 { |
| compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif"; |
| reg = <0x02004000 0x4000>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; |
| dma-names = "rx", "tx"; |
| clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>, |
| <&clks IMX6SLL_CLK_OSC>, |
| <&clks IMX6SLL_CLK_SPDIF>, |
| <&clks IMX6SLL_CLK_DUMMY>, |
| <&clks IMX6SLL_CLK_DUMMY>, |
| <&clks IMX6SLL_CLK_DUMMY>, |
| <&clks IMX6SLL_CLK_IPG>, |
| <&clks IMX6SLL_CLK_DUMMY>, |
| <&clks IMX6SLL_CLK_DUMMY>, |
| <&clks IMX6SLL_CLK_SPBA>; |
| clock-names = "core", "rxtx0", |
| "rxtx1", "rxtx2", |
| "rxtx3", "rxtx4", |
| "rxtx5", "rxtx6", |
| "rxtx7", "dma"; |
| status = "disabled"; |
| }; |
| |
| ecspi1: spi@2008000 { |
| compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x02008000 0x4000>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; |
| dma-names = "rx", "tx"; |
| clocks = <&clks IMX6SLL_CLK_ECSPI1>, |
| <&clks IMX6SLL_CLK_ECSPI1>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ecspi2: spi@200c000 { |
| compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x0200c000 0x4000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; |
| dma-names = "rx", "tx"; |
| clocks = <&clks IMX6SLL_CLK_ECSPI2>, |
| <&clks IMX6SLL_CLK_ECSPI2>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ecspi3: spi@2010000 { |
| compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x02010000 0x4000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; |
| dma-names = "rx", "tx"; |
| clocks = <&clks IMX6SLL_CLK_ECSPI3>, |
| <&clks IMX6SLL_CLK_ECSPI3>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ecspi4: spi@2014000 { |
| compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x02014000 0x4000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; |
| dma-names = "rx", "tx"; |
| clocks = <&clks IMX6SLL_CLK_ECSPI4>, |
| <&clks IMX6SLL_CLK_ECSPI4>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@2018000 { |
| compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", |
| "fsl,imx21-uart"; |
| reg = <0x02018000 0x4000>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; |
| dma-names = "rx", "tx"; |
| clocks = <&clks IMX6SLL_CLK_UART4_IPG>, |
| <&clks IMX6SLL_CLK_UART4_SERIAL>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@2020000 { |
| compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", |
| "fsl,imx21-uart"; |
| reg = <0x02020000 0x4000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; |
| dma-names = "rx", "tx"; |
| clocks = <&clks IMX6SLL_CLK_UART1_IPG>, |
| <&clks IMX6SLL_CLK_UART1_SERIAL>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@2024000 { |
| compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", |
| "fsl,imx21-uart"; |
| reg = <0x02024000 0x4000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; |
| dma-names = "rx", "tx"; |
| clocks = <&clks IMX6SLL_CLK_UART2_IPG>, |
| <&clks IMX6SLL_CLK_UART2_SERIAL>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ssi1: ssi@2028000 { |
| compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; |
| reg = <0x02028000 0x4000>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 37 22 0>, <&sdma 38 22 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| clocks = <&clks IMX6SLL_CLK_SSI1_IPG>, |
| <&clks IMX6SLL_CLK_SSI1>; |
| clock-names = "ipg", "baud"; |
| status = "disabled"; |
| }; |
| |
| ssi2: ssi@202c000 { |
| compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; |
| reg = <0x0202c000 0x4000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 41 22 0>, <&sdma 42 22 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| clocks = <&clks IMX6SLL_CLK_SSI2_IPG>, |
| <&clks IMX6SLL_CLK_SSI2>; |
| clock-names = "ipg", "baud"; |
| status = "disabled"; |
| }; |
| |
| ssi3: ssi@2030000 { |
| compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; |
| reg = <0x02030000 0x4000>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 45 22 0>, <&sdma 46 22 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| clocks = <&clks IMX6SLL_CLK_SSI3_IPG>, |
| <&clks IMX6SLL_CLK_SSI3>; |
| clock-names = "ipg", "baud"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@2034000 { |
| compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", |
| "fsl,imx21-uart"; |
| reg = <0x02034000 0x4000>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; |
| dma-name = "rx", "tx"; |
| clocks = <&clks IMX6SLL_CLK_UART3_IPG>, |
| <&clks IMX6SLL_CLK_UART3_SERIAL>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| }; |
| |
| pwm1: pwm@2080000 { |
| compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; |
| reg = <0x02080000 0x4000>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_PWM1>, |
| <&clks IMX6SLL_CLK_PWM1>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <3>; |
| }; |
| |
| pwm2: pwm@2084000 { |
| compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; |
| reg = <0x02084000 0x4000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_PWM2>, |
| <&clks IMX6SLL_CLK_PWM2>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <3>; |
| }; |
| |
| pwm3: pwm@2088000 { |
| compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; |
| reg = <0x02088000 0x4000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_PWM3>, |
| <&clks IMX6SLL_CLK_PWM3>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <3>; |
| }; |
| |
| pwm4: pwm@208c000 { |
| compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; |
| reg = <0x0208c000 0x4000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_PWM4>, |
| <&clks IMX6SLL_CLK_PWM4>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <3>; |
| }; |
| |
| gpt1: timer@2098000 { |
| compatible = "fsl,imx6sl-gpt"; |
| reg = <0x02098000 0x4000>; |
| interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_GPT_BUS>, |
| <&clks IMX6SLL_CLK_GPT_SERIAL>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| gpio1: gpio@209c000 { |
| compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| reg = <0x0209c000 0x4000>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_GPIO1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>; |
| }; |
| |
| gpio2: gpio@20a0000 { |
| compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| reg = <0x020a0000 0x4000>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_GPIO2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 50 32>; |
| }; |
| |
| gpio3: gpio@20a4000 { |
| compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| reg = <0x020a4000 0x4000>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_GPIO3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>, |
| <&iomuxc 16 101 2>, <&iomuxc 18 5 1>, |
| <&iomuxc 21 6 11>; |
| }; |
| |
| gpio4: gpio@20a8000 { |
| compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| reg = <0x020a8000 0x4000>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_GPIO4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>, |
| <&iomuxc 16 151 1>, <&iomuxc 17 149 1>, |
| <&iomuxc 18 146 1>, <&iomuxc 19 144 1>, |
| <&iomuxc 20 142 1>, <&iomuxc 21 143 1>, |
| <&iomuxc 22 150 1>, <&iomuxc 23 148 1>, |
| <&iomuxc 24 147 1>, <&iomuxc 25 145 1>, |
| <&iomuxc 26 152 1>, <&iomuxc 27 125 1>, |
| <&iomuxc 28 131 1>, <&iomuxc 29 134 1>, |
| <&iomuxc 30 129 1>, <&iomuxc 31 133 1>; |
| }; |
| |
| gpio5: gpio@20ac000 { |
| compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| reg = <0x020ac000 0x4000>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_GPIO5>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>, |
| <&iomuxc 2 132 1>, <&iomuxc 3 130 1>, |
| <&iomuxc 4 127 1>, <&iomuxc 5 126 1>, |
| <&iomuxc 6 120 1>, <&iomuxc 7 123 1>, |
| <&iomuxc 8 118 1>, <&iomuxc 9 122 1>, |
| <&iomuxc 10 124 1>, <&iomuxc 11 117 1>, |
| <&iomuxc 12 121 1>, <&iomuxc 13 119 1>, |
| <&iomuxc 14 116 1>, <&iomuxc 15 115 1>, |
| <&iomuxc 16 140 2>, <&iomuxc 18 136 1>, |
| <&iomuxc 19 138 1>, <&iomuxc 20 139 1>, |
| <&iomuxc 21 137 1>; |
| }; |
| |
| gpio6: gpio@20b0000 { |
| compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| reg = <0x020b0000 0x4000>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_GPIO6>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| kpp: keypad@20b8000 { |
| compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp"; |
| reg = <0x020b8000 0x4000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_KPP>; |
| status = "disabled"; |
| }; |
| |
| wdog1: watchdog@20bc000 { |
| compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; |
| reg = <0x020bc000 0x4000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_WDOG1>; |
| }; |
| |
| wdog2: watchdog@20c0000 { |
| compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; |
| reg = <0x020c0000 0x4000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_WDOG2>; |
| status = "disabled"; |
| }; |
| |
| clks: clock-controller@20c4000 { |
| compatible = "fsl,imx6sll-ccm"; |
| reg = <0x020c4000 0x4000>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| #clock-cells = <1>; |
| clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; |
| clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; |
| |
| assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>; |
| assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>; |
| }; |
| |
| anatop: anatop@20c8000 { |
| compatible = "fsl,imx6sll-anatop", |
| "fsl,imx6q-anatop", |
| "syscon", "simple-mfd"; |
| reg = <0x020c8000 0x4000>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_3p0: regulator-3p0@20c8120 { |
| compatible = "fsl,anatop-regulator"; |
| reg = <0x20c8120>; |
| regulator-name = "vdd3p0"; |
| regulator-min-microvolt = <2625000>; |
| regulator-max-microvolt = <3400000>; |
| anatop-reg-offset = <0x120>; |
| anatop-vol-bit-shift = <8>; |
| anatop-vol-bit-width = <5>; |
| anatop-min-bit-val = <0>; |
| anatop-min-voltage = <2625000>; |
| anatop-max-voltage = <3400000>; |
| anatop-enable-bit = <0>; |
| }; |
| |
| tempmon: temperature-sensor { |
| compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gpc>; |
| fsl,tempmon = <&anatop>; |
| nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; |
| nvmem-cell-names = "calib", "temp_grade"; |
| clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; |
| }; |
| }; |
| |
| usbphy1: usb-phy@20c9000 { |
| compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", |
| "fsl,imx23-usbphy"; |
| reg = <0x020c9000 0x1000>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_USBPHY1>; |
| phy-3p0-supply = <®_3p0>; |
| fsl,anatop = <&anatop>; |
| }; |
| |
| usbphy2: usb-phy@20ca000 { |
| compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", |
| "fsl,imx23-usbphy"; |
| reg = <0x020ca000 0x1000>; |
| interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_USBPHY2>; |
| phy-reg_3p0-supply = <®_3p0>; |
| fsl,anatop = <&anatop>; |
| }; |
| |
| snvs: snvs@20cc000 { |
| compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; |
| reg = <0x020cc000 0x4000>; |
| |
| snvs_rtc: snvs-rtc-lp { |
| compatible = "fsl,sec-v4.0-mon-rtc-lp"; |
| regmap = <&snvs>; |
| offset = <0x34>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| snvs_poweroff: snvs-poweroff { |
| compatible = "syscon-poweroff"; |
| regmap = <&snvs>; |
| offset = <0x38>; |
| mask = <0x61>; |
| status = "disabled"; |
| }; |
| |
| snvs_pwrkey: snvs-powerkey { |
| compatible = "fsl,sec-v4.0-pwrkey"; |
| regmap = <&snvs>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| linux,keycode = <KEY_POWER>; |
| wakeup-source; |
| status = "disabled"; |
| }; |
| }; |
| |
| src: reset-controller@20d8000 { |
| compatible = "fsl,imx6sll-src", "fsl,imx51-src"; |
| reg = <0x020d8000 0x4000>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| #reset-cells = <1>; |
| }; |
| |
| gpc: interrupt-controller@20dc000 { |
| compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc"; |
| reg = <0x020dc000 0x4000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&intc>; |
| }; |
| |
| iomuxc: pinctrl@20e0000 { |
| compatible = "fsl,imx6sll-iomuxc"; |
| reg = <0x020e0000 0x4000>; |
| }; |
| |
| gpr: iomuxc-gpr@20e4000 { |
| compatible = "fsl,imx6sll-iomuxc-gpr", |
| "fsl,imx6q-iomuxc-gpr", "syscon"; |
| reg = <0x020e4000 0x4000>; |
| }; |
| |
| csi: csi@20e8000 { |
| compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi"; |
| reg = <0x020e8000 0x4000>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_DUMMY>, |
| <&clks IMX6SLL_CLK_CSI>, |
| <&clks IMX6SLL_CLK_DUMMY>; |
| clock-names = "disp-axi", "csi_mclk", "disp_dcic"; |
| status = "disabled"; |
| }; |
| |
| sdma: dma-controller@20ec000 { |
| compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma"; |
| reg = <0x020ec000 0x4000>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_IPG>, |
| <&clks IMX6SLL_CLK_SDMA>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| iram = <&ocram>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; |
| }; |
| |
| pxp: pxp@20f0000 { |
| compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp"; |
| reg = <0x20f0000 0x4000>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_PXP>; |
| clock-names = "axi"; |
| }; |
| |
| lcdif: lcd-controller@20f8000 { |
| compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif"; |
| reg = <0x020f8000 0x4000>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>, |
| <&clks IMX6SLL_CLK_LCDIF_APB>, |
| <&clks IMX6SLL_CLK_DUMMY>; |
| clock-names = "pix", "axi", "disp_axi"; |
| status = "disabled"; |
| }; |
| |
| dcp: crypto@20fc000 { |
| compatible = "fsl,imx28-dcp"; |
| reg = <0x020fc000 0x4000>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_DCP>; |
| clock-names = "dcp"; |
| }; |
| }; |
| |
| aips2: bus@2100000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x02100000 0x100000>; |
| ranges; |
| |
| usbotg1: usb@2184000 { |
| compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", |
| "fsl,imx27-usb"; |
| reg = <0x02184000 0x200>; |
| interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_USBOH3>; |
| fsl,usbphy = <&usbphy1>; |
| fsl,usbmisc = <&usbmisc 0>; |
| fsl,anatop = <&anatop>; |
| ahb-burst-config = <0x0>; |
| tx-burst-size-dword = <0x10>; |
| rx-burst-size-dword = <0x10>; |
| status = "disabled"; |
| }; |
| |
| usbotg2: usb@2184200 { |
| compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", |
| "fsl,imx27-usb"; |
| reg = <0x02184200 0x200>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_USBOH3>; |
| fsl,usbphy = <&usbphy2>; |
| fsl,usbmisc = <&usbmisc 1>; |
| ahb-burst-config = <0x0>; |
| tx-burst-size-dword = <0x10>; |
| rx-burst-size-dword = <0x10>; |
| status = "disabled"; |
| }; |
| |
| usbmisc: usbmisc@2184800 { |
| #index-cells = <1>; |
| compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc", |
| "fsl,imx6q-usbmisc"; |
| reg = <0x02184800 0x200>; |
| }; |
| |
| usdhc1: mmc@2190000 { |
| compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; |
| reg = <0x02190000 0x4000>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_USDHC1>, |
| <&clks IMX6SLL_CLK_USDHC1>, |
| <&clks IMX6SLL_CLK_USDHC1>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| fsl,tuning-step = <2>; |
| fsl,tuning-start-tap = <20>; |
| status = "disabled"; |
| }; |
| |
| usdhc2: mmc@2194000 { |
| compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; |
| reg = <0x02194000 0x4000>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_USDHC2>, |
| <&clks IMX6SLL_CLK_USDHC2>, |
| <&clks IMX6SLL_CLK_USDHC2>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| fsl,tuning-step = <2>; |
| fsl,tuning-start-tap = <20>; |
| status = "disabled"; |
| }; |
| |
| usdhc3: mmc@2198000 { |
| compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; |
| reg = <0x02198000 0x4000>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_USDHC3>, |
| <&clks IMX6SLL_CLK_USDHC3>, |
| <&clks IMX6SLL_CLK_USDHC3>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| fsl,tuning-step = <2>; |
| fsl,tuning-start-tap = <20>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@21a0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; |
| reg = <0x021a0000 0x4000>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_I2C1>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@21a4000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; |
| reg = <0x021a4000 0x4000>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_I2C2>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@21a8000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; |
| reg = <0x021a8000 0x4000>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_I2C3>; |
| status = "disabled"; |
| }; |
| |
| mmdc: memory-controller@21b0000 { |
| compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; |
| reg = <0x021b0000 0x4000>; |
| clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>; |
| }; |
| |
| rngb: rng@21b4000 { |
| compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb"; |
| reg = <0x021b4000 0x4000>; |
| interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX6SLL_CLK_DUMMY>; |
| }; |
| |
| ocotp: efuse@21bc000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,imx6sll-ocotp", "syscon"; |
| reg = <0x021bc000 0x4000>; |
| clocks = <&clks IMX6SLL_CLK_OCOTP>; |
| |
| cpu_speed_grade: speed-grade@10 { |
| reg = <0x10 4>; |
| }; |
| |
| tempmon_calib: calib@38 { |
| reg = <0x38 4>; |
| }; |
| |
| tempmon_temp_grade: temp-grade@20 { |
| reg = <0x20 4>; |
| }; |
| }; |
| |
| audmux: audmux@21d8000 { |
| compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux"; |
| reg = <0x021d8000 0x4000>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@21f4000 { |
| compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", |
| "fsl,imx21-uart"; |
| reg = <0x021f4000 0x4000>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; |
| dma-names = "rx", "tx"; |
| clocks = <&clks IMX6SLL_CLK_UART5_IPG>, |
| <&clks IMX6SLL_CLK_UART5_SERIAL>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |
