| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * dts file for Hisilicon Hi3660 SoC |
| * |
| * Copyright (C) 2016, HiSilicon Ltd. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/hi3660-clock.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| compatible = "hisilicon,hi3660"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&cpu0>; |
| }; |
| core1 { |
| cpu = <&cpu1>; |
| }; |
| core2 { |
| cpu = <&cpu2>; |
| }; |
| core3 { |
| cpu = <&cpu3>; |
| }; |
| }; |
| cluster1 { |
| core0 { |
| cpu = <&cpu4>; |
| }; |
| core1 { |
| cpu = <&cpu5>; |
| }; |
| core2 { |
| cpu = <&cpu6>; |
| }; |
| core3 { |
| cpu = <&cpu7>; |
| }; |
| }; |
| }; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| next-level-cache = <&A53_L2>; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| capacity-dmips-mhz = <592>; |
| clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; |
| operating-points-v2 = <&cluster0_opp>; |
| #cooling-cells = <2>; |
| dynamic-power-coefficient = <110>; |
| }; |
| |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| next-level-cache = <&A53_L2>; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| capacity-dmips-mhz = <592>; |
| clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; |
| operating-points-v2 = <&cluster0_opp>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu2: cpu@2 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| next-level-cache = <&A53_L2>; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| capacity-dmips-mhz = <592>; |
| clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; |
| operating-points-v2 = <&cluster0_opp>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu3: cpu@3 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| next-level-cache = <&A53_L2>; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| capacity-dmips-mhz = <592>; |
| clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; |
| operating-points-v2 = <&cluster0_opp>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu4: cpu@100 { |
| compatible = "arm,cortex-a73"; |
| device_type = "cpu"; |
| reg = <0x0 0x100>; |
| enable-method = "psci"; |
| next-level-cache = <&A73_L2>; |
| cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; |
| capacity-dmips-mhz = <1024>; |
| clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; |
| operating-points-v2 = <&cluster1_opp>; |
| #cooling-cells = <2>; |
| dynamic-power-coefficient = <550>; |
| }; |
| |
| cpu5: cpu@101 { |
| compatible = "arm,cortex-a73"; |
| device_type = "cpu"; |
| reg = <0x0 0x101>; |
| enable-method = "psci"; |
| next-level-cache = <&A73_L2>; |
| cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; |
| capacity-dmips-mhz = <1024>; |
| clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; |
| operating-points-v2 = <&cluster1_opp>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu6: cpu@102 { |
| compatible = "arm,cortex-a73"; |
| device_type = "cpu"; |
| reg = <0x0 0x102>; |
| enable-method = "psci"; |
| next-level-cache = <&A73_L2>; |
| cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; |
| capacity-dmips-mhz = <1024>; |
| clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; |
| operating-points-v2 = <&cluster1_opp>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu7: cpu@103 { |
| compatible = "arm,cortex-a73"; |
| device_type = "cpu"; |
| reg = <0x0 0x103>; |
| enable-method = "psci"; |
| next-level-cache = <&A73_L2>; |
| cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; |
| capacity-dmips-mhz = <1024>; |
| clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; |
| operating-points-v2 = <&cluster1_opp>; |
| #cooling-cells = <2>; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| CPU_SLEEP_0: cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| local-timer-stop; |
| arm,psci-suspend-param = <0x0010000>; |
| entry-latency-us = <400>; |
| exit-latency-us = <650>; |
| min-residency-us = <1500>; |
| }; |
| CLUSTER_SLEEP_0: cluster-sleep-0 { |
| compatible = "arm,idle-state"; |
| local-timer-stop; |
| arm,psci-suspend-param = <0x1010000>; |
| entry-latency-us = <500>; |
| exit-latency-us = <1600>; |
| min-residency-us = <3500>; |
| }; |
| |
| |
| CPU_SLEEP_1: cpu-sleep-1 { |
| compatible = "arm,idle-state"; |
| local-timer-stop; |
| arm,psci-suspend-param = <0x0010000>; |
| entry-latency-us = <400>; |
| exit-latency-us = <550>; |
| min-residency-us = <1500>; |
| }; |
| |
| CLUSTER_SLEEP_1: cluster-sleep-1 { |
| compatible = "arm,idle-state"; |
| local-timer-stop; |
| arm,psci-suspend-param = <0x1010000>; |
| entry-latency-us = <800>; |
| exit-latency-us = <2900>; |
| min-residency-us = <3500>; |
| }; |
| }; |
| |
| A53_L2: l2-cache0 { |
| compatible = "cache"; |
| }; |
| |
| A73_L2: l2-cache1 { |
| compatible = "cache"; |
| }; |
| }; |
| |
| cluster0_opp: opp_table0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <533000000>; |
| opp-microvolt = <700000>; |
| clock-latency-ns = <300000>; |
| }; |
| |
| opp01 { |
| opp-hz = /bits/ 64 <999000000>; |
| opp-microvolt = <800000>; |
| clock-latency-ns = <300000>; |
| }; |
| |
| opp02 { |
| opp-hz = /bits/ 64 <1402000000>; |
| opp-microvolt = <900000>; |
| clock-latency-ns = <300000>; |
| }; |
| |
| opp03 { |
| opp-hz = /bits/ 64 <1709000000>; |
| opp-microvolt = <1000000>; |
| clock-latency-ns = <300000>; |
| }; |
| |
| opp04 { |
| opp-hz = /bits/ 64 <1844000000>; |
| opp-microvolt = <1100000>; |
| clock-latency-ns = <300000>; |
| }; |
| }; |
| |
| cluster1_opp: opp_table1 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp10 { |
| opp-hz = /bits/ 64 <903000000>; |
| opp-microvolt = <700000>; |
| clock-latency-ns = <300000>; |
| }; |
| |
| opp11 { |
| opp-hz = /bits/ 64 <1421000000>; |
| opp-microvolt = <800000>; |
| clock-latency-ns = <300000>; |
| }; |
| |
| opp12 { |
| opp-hz = /bits/ 64 <1805000000>; |
| opp-microvolt = <900000>; |
| clock-latency-ns = <300000>; |
| }; |
| |
| opp13 { |
| opp-hz = /bits/ 64 <2112000000>; |
| opp-microvolt = <1000000>; |
| clock-latency-ns = <300000>; |
| }; |
| |
| opp14 { |
| opp-hz = /bits/ 64 <2362000000>; |
| opp-microvolt = <1100000>; |
| clock-latency-ns = <300000>; |
| }; |
| }; |
| |
| gic: interrupt-controller@e82b0000 { |
| compatible = "arm,gic-400"; |
| reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */ |
| <0x0 0xe82b2000 0 0x2000>, /* GICC */ |
| <0x0 0xe82b4000 0 0x2000>, /* GICH */ |
| <0x0 0xe82b6000 0 0x2000>; /* GICV */ |
| #address-cells = <0>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | |
| IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| a53-pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, |
| <&cpu1>, |
| <&cpu2>, |
| <&cpu3>; |
| }; |
| |
| a73-pmu { |
| compatible = "arm,cortex-a73-pmu"; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu4>, |
| <&cpu5>, |
| <&cpu6>, |
| <&cpu7>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | |
| IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| crg_ctrl: crg_ctrl@fff35000 { |
| compatible = "hisilicon,hi3660-crgctrl", "syscon"; |
| reg = <0x0 0xfff35000 0x0 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| crg_rst: crg_rst_controller { |
| compatible = "hisilicon,hi3660-reset"; |
| #reset-cells = <2>; |
| hisi,rst-syscon = <&crg_ctrl>; |
| }; |
| |
| |
| pctrl: pctrl@e8a09000 { |
| compatible = "hisilicon,hi3660-pctrl", "syscon"; |
| reg = <0x0 0xe8a09000 0x0 0x2000>; |
| #clock-cells = <1>; |
| }; |
| |
| pmuctrl: crg_ctrl@fff34000 { |
| compatible = "hisilicon,hi3660-pmuctrl", "syscon"; |
| reg = <0x0 0xfff34000 0x0 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| sctrl: sctrl@fff0a000 { |
| compatible = "hisilicon,hi3660-sctrl", "syscon"; |
| reg = <0x0 0xfff0a000 0x0 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| iomcu: iomcu@ffd7e000 { |
| compatible = "hisilicon,hi3660-iomcu", "syscon"; |
| reg = <0x0 0xffd7e000 0x0 0x1000>; |
| #clock-cells = <1>; |
| |
| }; |
| |
| iomcu_rst: reset { |
| compatible = "hisilicon,hi3660-reset"; |
| hisi,rst-syscon = <&iomcu>; |
| #reset-cells = <2>; |
| }; |
| |
| mailbox: mailbox@e896b000 { |
| compatible = "hisilicon,hi3660-mbox"; |
| reg = <0x0 0xe896b000 0x0 0x1000>; |
| interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <3>; |
| }; |
| |
| stub_clock: stub_clock@e896b500 { |
| compatible = "hisilicon,hi3660-stub-clk"; |
| reg = <0x0 0xe896b500 0x0 0x0100>; |
| #clock-cells = <1>; |
| mboxes = <&mailbox 13 3 0>; |
| }; |
| |
| dual_timer0: timer@fff14000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x0 0xfff14000 0x0 0x1000>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_OSC32K>, |
| <&crg_ctrl HI3660_OSC32K>, |
| <&crg_ctrl HI3660_OSC32K>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| }; |
| |
| i2c0: i2c@ffd71000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0xffd71000 0x0 0x1000>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <400000>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>; |
| resets = <&iomcu_rst 0x20 3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@ffd72000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0xffd72000 0x0 0x1000>; |
| interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <400000>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_I2C1>; |
| resets = <&iomcu_rst 0x20 4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@fdf0c000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0xfdf0c000 0x0 0x1000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <400000>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_I2C3>; |
| resets = <&crg_rst 0x78 7>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@fdf0b000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0xfdf0b000 0x0 0x1000>; |
| interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <400000>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_I2C7>; |
| resets = <&crg_rst 0x60 14>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c7_pmx_func &i2c7_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@fdf02000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xfdf02000 0x0 0x1000>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, |
| <&crg_ctrl HI3660_PCLK>; |
| clock-names = "uartclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@fdf00000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xfdf00000 0x0 0x1000>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| dma-names = "rx", "tx"; |
| dmas = <&dma0 2 &dma0 3>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>, |
| <&crg_ctrl HI3660_CLK_GATE_UART1>; |
| clock-names = "uartclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@fdf03000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xfdf03000 0x0 0x1000>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| dma-names = "rx", "tx"; |
| dmas = <&dma0 4 &dma0 5>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>, |
| <&crg_ctrl HI3660_PCLK>; |
| clock-names = "uartclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@ffd74000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xffd74000 0x0 0x1000>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_FACTOR_UART3>, |
| <&crg_ctrl HI3660_PCLK>; |
| clock-names = "uartclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@fdf01000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xfdf01000 0x0 0x1000>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| dma-names = "rx", "tx"; |
| dmas = <&dma0 6 &dma0 7>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>, |
| <&crg_ctrl HI3660_CLK_GATE_UART4>; |
| clock-names = "uartclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@fdf05000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xfdf05000 0x0 0x1000>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| dma-names = "rx", "tx"; |
| dmas = <&dma0 8 &dma0 9>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>, |
| <&crg_ctrl HI3660_CLK_GATE_UART5>; |
| clock-names = "uartclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| uart6: serial@fff32000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xfff32000 0x0 0x1000>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_CLK_UART6>, |
| <&crg_ctrl HI3660_PCLK>; |
| clock-names = "uartclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| dma0: dma@fdf30000 { |
| compatible = "hisilicon,k3-dma-1.0"; |
| reg = <0x0 0xfdf30000 0x0 0x1000>; |
| #dma-cells = <1>; |
| dma-channels = <16>; |
| dma-requests = <32>; |
| dma-channel-mask = <0xfffe>; |
| interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>; |
| dma-no-cci; |
| dma-type = "hi3660_dma"; |
| }; |
| |
| asp_dmac: dma-controller@e804b000 { |
| compatible = "hisilicon,hisi-pcm-asp-dma-1.0"; |
| reg = <0x0 0xe804b000 0x0 0x1000>; |
| #dma-cells = <1>; |
| dma-channels = <16>; |
| dma-requests = <32>; |
| interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "asp_dma_irq"; |
| }; |
| |
| rtc0: rtc@fff04000 { |
| compatible = "arm,pl031", "arm,primecell"; |
| reg = <0x0 0Xfff04000 0x0 0x1000>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_PCLK>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio0: gpio@e8a0b000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a0b000 0 0x1000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 1 0 7>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO0>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio1: gpio@e8a0c000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a0c000 0 0x1000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 1 7 7>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO1>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio2: gpio@e8a0d000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a0d000 0 0x1000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 14 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio3: gpio@e8a0e000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a0e000 0 0x1000>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 22 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO3>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio4: gpio@e8a0f000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a0f000 0 0x1000>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 30 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO4>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio5: gpio@e8a10000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a10000 0 0x1000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 38 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO5>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio6: gpio@e8a11000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a11000 0 0x1000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 46 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO6>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio7: gpio@e8a12000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a12000 0 0x1000>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 54 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO7>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio8: gpio@e8a13000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a13000 0 0x1000>; |
| interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 62 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO8>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio9: gpio@e8a14000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a14000 0 0x1000>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 70 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO9>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio10: gpio@e8a15000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a15000 0 0x1000>; |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 78 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO10>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio11: gpio@e8a16000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a16000 0 0x1000>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 86 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO11>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio12: gpio@e8a17000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a17000 0 0x1000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO12>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio13: gpio@e8a18000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a18000 0 0x1000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 102 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO13>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio14: gpio@e8a19000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a19000 0 0x1000>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 110 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO14>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio15: gpio@e8a1a000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a1a000 0 0x1000>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 118 6>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO15>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio16: gpio@e8a1b000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a1b000 0 0x1000>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO16>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio17: gpio@e8a1c000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a1c000 0 0x1000>; |
| interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO17>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio18: gpio@ff3b4000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xff3b4000 0 0x1000>; |
| interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx2 0 0 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO18>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio19: gpio@ff3b5000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xff3b5000 0 0x1000>; |
| interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx2 0 8 4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO19>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio20: gpio@e8a1f000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a1f000 0 0x1000>; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx1 0 0 6>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO20>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio21: gpio@e8a20000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xe8a20000 0 0x1000>; |
| interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&pmx3 0 0 6>; |
| clocks = <&crg_ctrl HI3660_PCLK_GPIO21>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio22: gpio@fff0b000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xfff0b000 0 0x1000>; |
| interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| /* GPIO176 */ |
| gpio-ranges = <&pmx4 2 0 6>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&sctrl HI3660_PCLK_AO_GPIO0>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio23: gpio@fff0c000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xfff0c000 0 0x1000>; |
| interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| /* GPIO184 */ |
| gpio-ranges = <&pmx4 0 6 7>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&sctrl HI3660_PCLK_AO_GPIO1>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio24: gpio@fff0d000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xfff0d000 0 0x1000>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| /* GPIO192 */ |
| gpio-ranges = <&pmx4 0 13 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&sctrl HI3660_PCLK_AO_GPIO2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio25: gpio@fff0e000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xfff0e000 0 0x1000>; |
| interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| /* GPIO200 */ |
| gpio-ranges = <&pmx4 0 21 4 &pmx4 5 25 3>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&sctrl HI3660_PCLK_AO_GPIO3>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio26: gpio@fff0f000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xfff0f000 0 0x1000>; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| /* GPIO208 */ |
| gpio-ranges = <&pmx4 0 28 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&sctrl HI3660_PCLK_AO_GPIO4>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio27: gpio@fff10000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xfff10000 0 0x1000>; |
| interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| /* GPIO216 */ |
| gpio-ranges = <&pmx4 0 36 6>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&sctrl HI3660_PCLK_AO_GPIO5>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio28: gpio@fff1d000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0 0xfff1d000 0 0x1000>; |
| interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&sctrl HI3660_PCLK_AO_GPIO6>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| spi2: spi@ffd68000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0xffd68000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>, <&crg_ctrl HI3660_CLK_GATE_SPI2>; |
| clock-names = "sspclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_pmx_func &spi2_cfg_func>; |
| num-cs = <1>; |
| cs-gpios = <&gpio27 2 0>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@ff3b3000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0xff3b3000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>, <&crg_ctrl HI3660_CLK_GATE_SPI3>; |
| clock-names = "sspclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi3_pmx_func &spi3_cfg_func>; |
| num-cs = <1>; |
| cs-gpios = <&gpio18 5 0>; |
| status = "disabled"; |
| }; |
| |
| pcie@f4000000 { |
| compatible = "hisilicon,kirin960-pcie"; |
| reg = <0x0 0xf4000000 0x0 0x1000>, |
| <0x0 0xff3fe000 0x0 0x1000>, |
| <0x0 0xf3f20000 0x0 0x40000>, |
| <0x0 0xf5000000 0x0 0x2000>; |
| reg-names = "dbi", "apb", "phy", "config"; |
| bus-range = <0x0 0xff>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| ranges = <0x02000000 0x0 0x00000000 |
| 0x0 0xf6000000 |
| 0x0 0x02000000>; |
| num-lanes = <1>; |
| #interrupt-cells = <1>; |
| interrupts = <0 283 4>; |
| interrupt-names = "msi"; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = <0x0 0 0 1 |
| &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| <0x0 0 0 2 |
| &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| <0x0 0 0 3 |
| &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| <0x0 0 0 4 |
| &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, |
| <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, |
| <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, |
| <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, |
| <&crg_ctrl HI3660_ACLK_GATE_PCIE>; |
| clock-names = "pcie_phy_ref", "pcie_aux", |
| "pcie_apb_phy", "pcie_apb_sys", |
| "pcie_aclk"; |
| reset-gpios = <&gpio11 1 0 >; |
| }; |
| |
| /* UFS */ |
| ufs: ufs@ff3b0000 { |
| compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1"; |
| /* 0: HCI standard */ |
| /* 1: UFS SYS CTRL */ |
| reg = <0x0 0xff3b0000 0x0 0x1000>, |
| <0x0 0xff3b1000 0x0 0x1000>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>, |
| <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>; |
| clock-names = "ref_clk", "phy_clk"; |
| freq-table-hz = <0 0 |
| 0 0>; |
| /* offset: 0x84; bit: 12 */ |
| resets = <&crg_rst 0x84 12>; |
| reset-names = "rst"; |
| }; |
| |
| /* SD */ |
| dwmmc1: dwmmc1@ff37f000 { |
| compatible = "hisilicon,hi3660-dw-mshc"; |
| reg = <0x0 0xff37f000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_SD>, |
| <&crg_ctrl HI3660_HCLK_GATE_SD>; |
| clock-names = "ciu", "biu"; |
| clock-frequency = <3200000>; |
| resets = <&crg_rst 0x94 18>; |
| reset-names = "reset"; |
| hisilicon,peripheral-syscon = <&sctrl>; |
| card-detect-delay = <200>; |
| status = "disabled"; |
| }; |
| |
| /* SDIO */ |
| dwmmc2: dwmmc2@ff3ff000 { |
| compatible = "hisilicon,hi3660-dw-mshc"; |
| reg = <0x0 0xff3ff000 0x0 0x1000>; |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>, |
| <&crg_ctrl HI3660_HCLK_GATE_SDIO0>; |
| clock-names = "ciu", "biu"; |
| resets = <&crg_rst 0x94 20>; |
| reset-names = "reset"; |
| card-detect-delay = <200>; |
| status = "disabled"; |
| }; |
| |
| watchdog0: watchdog@e8a06000 { |
| compatible = "arm,sp805-wdt", "arm,primecell"; |
| reg = <0x0 0xe8a06000 0x0 0x1000>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_OSC32K>, |
| <&crg_ctrl HI3660_OSC32K>; |
| clock-names = "wdog_clk", "apb_pclk"; |
| }; |
| |
| watchdog1: watchdog@e8a07000 { |
| compatible = "arm,sp805-wdt", "arm,primecell"; |
| reg = <0x0 0xe8a07000 0x0 0x1000>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg_ctrl HI3660_OSC32K>, |
| <&crg_ctrl HI3660_OSC32K>; |
| clock-names = "wdog_clk", "apb_pclk"; |
| }; |
| |
| tsensor: tsensor@fff30000 { |
| compatible = "hisilicon,hi3660-tsensor"; |
| reg = <0x0 0xfff30000 0x0 0x1000>; |
| interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| thermal-zones { |
| |
| cls0: cls0-thermal { |
| polling-delay = <1000>; |
| polling-delay-passive = <100>; |
| sustainable-power = <4500>; |
| |
| /* sensor ID */ |
| thermal-sensors = <&tsensor 1>; |
| |
| trips { |
| threshold: trip-point0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| |
| target: trip-point1 { |
| temperature = <75000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&target>; |
| contribution = <1024>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&target>; |
| contribution = <512>; |
| cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| }; |
| |
| usb3_otg_bc: usb3_otg_bc@ff200000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x0 0xff200000 0x0 0x1000>; |
| |
| usb_phy: usb-phy { |
| compatible = "hisilicon,hi3660-usb-phy"; |
| #phy-cells = <0>; |
| hisilicon,pericrg-syscon = <&crg_ctrl>; |
| hisilicon,pctrl-syscon = <&pctrl>; |
| hisilicon,eye-diagram-param = <0x22466e4>; |
| }; |
| }; |
| |
| dwc3: usb@ff100000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0xff100000 0x0 0x100000>; |
| |
| clocks = <&crg_ctrl HI3660_CLK_ABB_USB>, |
| <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>; |
| clock-names = "ref", "bus_early"; |
| |
| assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>; |
| assigned-clock-rates = <229000000>; |
| |
| resets = <&crg_rst 0x90 8>, |
| <&crg_rst 0x90 7>, |
| <&crg_rst 0x90 6>, |
| <&crg_rst 0x90 5>; |
| |
| interrupts = <0 159 4>, <0 161 4>; |
| phys = <&usb_phy>; |
| phy-names = "usb3-phy"; |
| }; |
| }; |
| }; |
| |
| #include "hi3660-coresight.dtsi" |
