| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/drivers/devfreq/governor_passive.c |
| * |
| * Copyright (C) 2016 Samsung Electronics |
| * Author: Chanwoo Choi <cw00.choi@samsung.com> |
| * Author: MyungJoo Ham <myungjoo.ham@samsung.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/devfreq.h> |
| #include "governor.h" |
| |
| static int devfreq_passive_get_target_freq(struct devfreq *devfreq, |
| unsigned long *freq) |
| { |
| struct devfreq_passive_data *p_data |
| = (struct devfreq_passive_data *)devfreq->data; |
| struct devfreq *parent_devfreq = (struct devfreq *)p_data->parent; |
| unsigned long child_freq = ULONG_MAX; |
| struct dev_pm_opp *opp, *p_opp; |
| int i, count; |
| |
| /* |
| * If the devfreq device with passive governor has the specific method |
| * to determine the next frequency, should use the get_target_freq() |
| * of struct devfreq_passive_data. |
| */ |
| if (p_data->get_target_freq) |
| return p_data->get_target_freq(devfreq, freq); |
| |
| /* |
| * If the parent and passive devfreq device uses the OPP table, |
| * get the next frequency by using the OPP table. |
| */ |
| |
| /* |
| * - parent devfreq device uses the governors except for passive. |
| * - passive devfreq device uses the passive governor. |
| * |
| * Each devfreq has the OPP table. After deciding the new frequency |
| * from the governor of parent devfreq device, the passive governor |
| * need to get the index of new frequency on OPP table of parent |
| * device. And then the index is used for getting the suitable |
| * new frequency for passive devfreq device. |
| */ |
| if (!devfreq->profile || !devfreq->profile->freq_table |
| || devfreq->profile->max_state <= 0) |
| return -EINVAL; |
| |
| /* |
| * The passive governor have to get the correct frequency from OPP |
| * list of parent device. Because in this case, *freq is temporary |
| * value which is decided by ondemand governor. |
| */ |
| if (devfreq->opp_table && parent_devfreq->opp_table) { |
| p_opp = devfreq_recommended_opp(parent_devfreq->dev.parent, |
| freq, 0); |
| if (IS_ERR(p_opp)) |
| return PTR_ERR(p_opp); |
| |
| opp = dev_pm_opp_xlate_required_opp(parent_devfreq->opp_table, |
| devfreq->opp_table, p_opp); |
| dev_pm_opp_put(p_opp); |
| |
| if (IS_ERR(opp)) |
| goto no_required_opp; |
| |
| *freq = dev_pm_opp_get_freq(opp); |
| dev_pm_opp_put(opp); |
| |
| return 0; |
| } |
| |
| no_required_opp: |
| /* |
| * Get the OPP table's index of decided frequency by governor |
| * of parent device. |
| */ |
| for (i = 0; i < parent_devfreq->profile->max_state; i++) |
| if (parent_devfreq->profile->freq_table[i] == *freq) |
| break; |
| |
| if (i == parent_devfreq->profile->max_state) |
| return -EINVAL; |
| |
| /* Get the suitable frequency by using index of parent device. */ |
| if (i < devfreq->profile->max_state) { |
| child_freq = devfreq->profile->freq_table[i]; |
| } else { |
| count = devfreq->profile->max_state; |
| child_freq = devfreq->profile->freq_table[count - 1]; |
| } |
| |
| /* Return the suitable frequency for passive device. */ |
| *freq = child_freq; |
| |
| return 0; |
| } |
| |
| static int devfreq_passive_notifier_call(struct notifier_block *nb, |
| unsigned long event, void *ptr) |
| { |
| struct devfreq_passive_data *data |
| = container_of(nb, struct devfreq_passive_data, nb); |
| struct devfreq *devfreq = (struct devfreq *)data->this; |
| struct devfreq *parent = (struct devfreq *)data->parent; |
| struct devfreq_freqs *freqs = (struct devfreq_freqs *)ptr; |
| unsigned long freq = freqs->new; |
| int ret = 0; |
| |
| mutex_lock_nested(&devfreq->lock, SINGLE_DEPTH_NESTING); |
| switch (event) { |
| case DEVFREQ_PRECHANGE: |
| if (parent->previous_freq > freq) |
| ret = devfreq_update_target(devfreq, freq); |
| |
| break; |
| case DEVFREQ_POSTCHANGE: |
| if (parent->previous_freq < freq) |
| ret = devfreq_update_target(devfreq, freq); |
| break; |
| } |
| mutex_unlock(&devfreq->lock); |
| |
| if (ret < 0) |
| dev_warn(&devfreq->dev, |
| "failed to update devfreq using passive governor\n"); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int devfreq_passive_event_handler(struct devfreq *devfreq, |
| unsigned int event, void *data) |
| { |
| struct devfreq_passive_data *p_data |
| = (struct devfreq_passive_data *)devfreq->data; |
| struct devfreq *parent = (struct devfreq *)p_data->parent; |
| struct notifier_block *nb = &p_data->nb; |
| int ret = 0; |
| |
| if (!parent) |
| return -EPROBE_DEFER; |
| |
| switch (event) { |
| case DEVFREQ_GOV_START: |
| if (!p_data->this) |
| p_data->this = devfreq; |
| |
| nb->notifier_call = devfreq_passive_notifier_call; |
| ret = devfreq_register_notifier(parent, nb, |
| DEVFREQ_TRANSITION_NOTIFIER); |
| break; |
| case DEVFREQ_GOV_STOP: |
| WARN_ON(devfreq_unregister_notifier(parent, nb, |
| DEVFREQ_TRANSITION_NOTIFIER)); |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static struct devfreq_governor devfreq_passive = { |
| .name = DEVFREQ_GOV_PASSIVE, |
| .flags = DEVFREQ_GOV_FLAG_IMMUTABLE, |
| .get_target_freq = devfreq_passive_get_target_freq, |
| .event_handler = devfreq_passive_event_handler, |
| }; |
| |
| static int __init devfreq_passive_init(void) |
| { |
| return devfreq_add_governor(&devfreq_passive); |
| } |
| subsys_initcall(devfreq_passive_init); |
| |
| static void __exit devfreq_passive_exit(void) |
| { |
| int ret; |
| |
| ret = devfreq_remove_governor(&devfreq_passive); |
| if (ret) |
| pr_err("%s: failed remove governor %d\n", __func__, ret); |
| } |
| module_exit(devfreq_passive_exit); |
| |
| MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); |
| MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); |
| MODULE_DESCRIPTION("DEVFREQ Passive governor"); |
| MODULE_LICENSE("GPL v2"); |