| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * FPGA Freeze Bridge Controller |
| * |
| * Copyright (C) 2016 Altera Corporation. All rights reserved. |
| */ |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/of_device.h> |
| #include <linux/module.h> |
| #include <linux/fpga/fpga-bridge.h> |
| |
| #define FREEZE_CSR_STATUS_OFFSET 0 |
| #define FREEZE_CSR_CTRL_OFFSET 4 |
| #define FREEZE_CSR_ILLEGAL_REQ_OFFSET 8 |
| #define FREEZE_CSR_REG_VERSION 12 |
| |
| #define FREEZE_CSR_SUPPORTED_VERSION 2 |
| #define FREEZE_CSR_OFFICIAL_VERSION 0xad000003 |
| |
| #define FREEZE_CSR_STATUS_FREEZE_REQ_DONE BIT(0) |
| #define FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE BIT(1) |
| |
| #define FREEZE_CSR_CTRL_FREEZE_REQ BIT(0) |
| #define FREEZE_CSR_CTRL_RESET_REQ BIT(1) |
| #define FREEZE_CSR_CTRL_UNFREEZE_REQ BIT(2) |
| |
| #define FREEZE_BRIDGE_NAME "freeze" |
| |
| struct altera_freeze_br_data { |
| struct device *dev; |
| void __iomem *base_addr; |
| bool enable; |
| }; |
| |
| /* |
| * Poll status until status bit is set or we have a timeout. |
| */ |
| static int altera_freeze_br_req_ack(struct altera_freeze_br_data *priv, |
| u32 timeout, u32 req_ack) |
| { |
| struct device *dev = priv->dev; |
| void __iomem *csr_illegal_req_addr = priv->base_addr + |
| FREEZE_CSR_ILLEGAL_REQ_OFFSET; |
| u32 status, illegal, ctrl; |
| int ret = -ETIMEDOUT; |
| |
| do { |
| illegal = readl(csr_illegal_req_addr); |
| if (illegal) { |
| dev_err(dev, "illegal request detected 0x%x", illegal); |
| |
| writel(1, csr_illegal_req_addr); |
| |
| illegal = readl(csr_illegal_req_addr); |
| if (illegal) |
| dev_err(dev, "illegal request not cleared 0x%x", |
| illegal); |
| |
| ret = -EINVAL; |
| break; |
| } |
| |
| status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET); |
| dev_dbg(dev, "%s %x %x\n", __func__, status, req_ack); |
| status &= req_ack; |
| if (status) { |
| ctrl = readl(priv->base_addr + FREEZE_CSR_CTRL_OFFSET); |
| dev_dbg(dev, "%s request %x acknowledged %x %x\n", |
| __func__, req_ack, status, ctrl); |
| ret = 0; |
| break; |
| } |
| |
| udelay(1); |
| } while (timeout--); |
| |
| if (ret == -ETIMEDOUT) |
| dev_err(dev, "%s timeout waiting for 0x%x\n", |
| __func__, req_ack); |
| |
| return ret; |
| } |
| |
| static int altera_freeze_br_do_freeze(struct altera_freeze_br_data *priv, |
| u32 timeout) |
| { |
| struct device *dev = priv->dev; |
| void __iomem *csr_ctrl_addr = priv->base_addr + |
| FREEZE_CSR_CTRL_OFFSET; |
| u32 status; |
| int ret; |
| |
| status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET); |
| |
| dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr)); |
| |
| if (status & FREEZE_CSR_STATUS_FREEZE_REQ_DONE) { |
| dev_dbg(dev, "%s bridge already disabled %d\n", |
| __func__, status); |
| return 0; |
| } else if (!(status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE)) { |
| dev_err(dev, "%s bridge not enabled %d\n", __func__, status); |
| return -EINVAL; |
| } |
| |
| writel(FREEZE_CSR_CTRL_FREEZE_REQ, csr_ctrl_addr); |
| |
| ret = altera_freeze_br_req_ack(priv, timeout, |
| FREEZE_CSR_STATUS_FREEZE_REQ_DONE); |
| |
| if (ret) |
| writel(0, csr_ctrl_addr); |
| else |
| writel(FREEZE_CSR_CTRL_RESET_REQ, csr_ctrl_addr); |
| |
| return ret; |
| } |
| |
| static int altera_freeze_br_do_unfreeze(struct altera_freeze_br_data *priv, |
| u32 timeout) |
| { |
| struct device *dev = priv->dev; |
| void __iomem *csr_ctrl_addr = priv->base_addr + |
| FREEZE_CSR_CTRL_OFFSET; |
| u32 status; |
| int ret; |
| |
| writel(0, csr_ctrl_addr); |
| |
| status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET); |
| |
| dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr)); |
| |
| if (status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE) { |
| dev_dbg(dev, "%s bridge already enabled %d\n", |
| __func__, status); |
| return 0; |
| } else if (!(status & FREEZE_CSR_STATUS_FREEZE_REQ_DONE)) { |
| dev_err(dev, "%s bridge not frozen %d\n", __func__, status); |
| return -EINVAL; |
| } |
| |
| writel(FREEZE_CSR_CTRL_UNFREEZE_REQ, csr_ctrl_addr); |
| |
| ret = altera_freeze_br_req_ack(priv, timeout, |
| FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE); |
| |
| status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET); |
| |
| dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr)); |
| |
| writel(0, csr_ctrl_addr); |
| |
| return ret; |
| } |
| |
| /* |
| * enable = 1 : allow traffic through the bridge |
| * enable = 0 : disable traffic through the bridge |
| */ |
| static int altera_freeze_br_enable_set(struct fpga_bridge *bridge, |
| bool enable) |
| { |
| struct altera_freeze_br_data *priv = bridge->priv; |
| struct fpga_image_info *info = bridge->info; |
| u32 timeout = 0; |
| int ret; |
| |
| if (enable) { |
| if (info) |
| timeout = info->enable_timeout_us; |
| |
| ret = altera_freeze_br_do_unfreeze(bridge->priv, timeout); |
| } else { |
| if (info) |
| timeout = info->disable_timeout_us; |
| |
| ret = altera_freeze_br_do_freeze(bridge->priv, timeout); |
| } |
| |
| if (!ret) |
| priv->enable = enable; |
| |
| return ret; |
| } |
| |
| static int altera_freeze_br_enable_show(struct fpga_bridge *bridge) |
| { |
| struct altera_freeze_br_data *priv = bridge->priv; |
| |
| return priv->enable; |
| } |
| |
| static const struct fpga_bridge_ops altera_freeze_br_br_ops = { |
| .enable_set = altera_freeze_br_enable_set, |
| .enable_show = altera_freeze_br_enable_show, |
| }; |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id altera_freeze_br_of_match[] = { |
| { .compatible = "altr,freeze-bridge-controller", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, altera_freeze_br_of_match); |
| #endif |
| |
| static int altera_freeze_br_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = pdev->dev.of_node; |
| void __iomem *base_addr; |
| struct altera_freeze_br_data *priv; |
| struct fpga_bridge *br; |
| struct resource *res; |
| u32 status, revision; |
| |
| if (!np) |
| return -ENODEV; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base_addr = devm_ioremap_resource(dev, res); |
| if (IS_ERR(base_addr)) |
| return PTR_ERR(base_addr); |
| |
| revision = readl(base_addr + FREEZE_CSR_REG_VERSION); |
| if ((revision != FREEZE_CSR_SUPPORTED_VERSION) && |
| (revision != FREEZE_CSR_OFFICIAL_VERSION)) { |
| dev_err(dev, |
| "%s unexpected revision 0x%x != 0x%x != 0x%x\n", |
| __func__, revision, FREEZE_CSR_SUPPORTED_VERSION, |
| FREEZE_CSR_OFFICIAL_VERSION); |
| return -EINVAL; |
| } |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->dev = dev; |
| |
| status = readl(base_addr + FREEZE_CSR_STATUS_OFFSET); |
| if (status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE) |
| priv->enable = 1; |
| |
| priv->base_addr = base_addr; |
| |
| br = devm_fpga_bridge_create(dev, FREEZE_BRIDGE_NAME, |
| &altera_freeze_br_br_ops, priv); |
| if (!br) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, br); |
| |
| return fpga_bridge_register(br); |
| } |
| |
| static int altera_freeze_br_remove(struct platform_device *pdev) |
| { |
| struct fpga_bridge *br = platform_get_drvdata(pdev); |
| |
| fpga_bridge_unregister(br); |
| |
| return 0; |
| } |
| |
| static struct platform_driver altera_freeze_br_driver = { |
| .probe = altera_freeze_br_probe, |
| .remove = altera_freeze_br_remove, |
| .driver = { |
| .name = "altera_freeze_br", |
| .of_match_table = of_match_ptr(altera_freeze_br_of_match), |
| }, |
| }; |
| |
| module_platform_driver(altera_freeze_br_driver); |
| |
| MODULE_DESCRIPTION("Altera Freeze Bridge"); |
| MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>"); |
| MODULE_LICENSE("GPL v2"); |