| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2019 Bootlin |
| * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/syscon.h> |
| |
| #define LOGICVC_CTRL_REG 0x40 |
| #define LOGICVC_CTRL_GPIO_SHIFT 11 |
| #define LOGICVC_CTRL_GPIO_BITS 5 |
| |
| #define LOGICVC_POWER_CTRL_REG 0x78 |
| #define LOGICVC_POWER_CTRL_GPIO_SHIFT 0 |
| #define LOGICVC_POWER_CTRL_GPIO_BITS 4 |
| |
| struct logicvc_gpio { |
| struct gpio_chip chip; |
| struct regmap *regmap; |
| }; |
| |
| static void logicvc_gpio_offset(struct logicvc_gpio *logicvc, unsigned offset, |
| unsigned int *reg, unsigned int *bit) |
| { |
| if (offset >= LOGICVC_CTRL_GPIO_BITS) { |
| *reg = LOGICVC_POWER_CTRL_REG; |
| |
| /* To the (virtual) power ctrl offset. */ |
| offset -= LOGICVC_CTRL_GPIO_BITS; |
| /* To the actual bit offset in reg. */ |
| offset += LOGICVC_POWER_CTRL_GPIO_SHIFT; |
| } else { |
| *reg = LOGICVC_CTRL_REG; |
| |
| /* To the actual bit offset in reg. */ |
| offset += LOGICVC_CTRL_GPIO_SHIFT; |
| } |
| |
| *bit = BIT(offset); |
| } |
| |
| static int logicvc_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct logicvc_gpio *logicvc = gpiochip_get_data(chip); |
| unsigned int reg, bit, value; |
| int ret; |
| |
| logicvc_gpio_offset(logicvc, offset, ®, &bit); |
| |
| ret = regmap_read(logicvc->regmap, reg, &value); |
| if (ret) |
| return ret; |
| |
| return !!(value & bit); |
| } |
| |
| static void logicvc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct logicvc_gpio *logicvc = gpiochip_get_data(chip); |
| unsigned int reg, bit; |
| |
| logicvc_gpio_offset(logicvc, offset, ®, &bit); |
| |
| regmap_update_bits(logicvc->regmap, reg, bit, value ? bit : 0); |
| } |
| |
| static int logicvc_gpio_direction_output(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| /* Pins are always configured as output, so just set the value. */ |
| logicvc_gpio_set(chip, offset, value); |
| |
| return 0; |
| } |
| |
| static struct regmap_config logicvc_gpio_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .name = "logicvc-gpio", |
| }; |
| |
| static int logicvc_gpio_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *of_node = dev->of_node; |
| struct logicvc_gpio *logicvc; |
| int ret; |
| |
| logicvc = devm_kzalloc(dev, sizeof(*logicvc), GFP_KERNEL); |
| if (!logicvc) |
| return -ENOMEM; |
| |
| /* Try to get regmap from parent first. */ |
| logicvc->regmap = syscon_node_to_regmap(of_node->parent); |
| |
| /* Grab our own regmap if that fails. */ |
| if (IS_ERR(logicvc->regmap)) { |
| struct resource res; |
| void __iomem *base; |
| |
| ret = of_address_to_resource(of_node, 0, &res); |
| if (ret) { |
| dev_err(dev, "Failed to get resource from address\n"); |
| return ret; |
| } |
| |
| base = devm_ioremap_resource(dev, &res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| logicvc_gpio_regmap_config.max_register = resource_size(&res) - |
| logicvc_gpio_regmap_config.reg_stride; |
| |
| logicvc->regmap = |
| devm_regmap_init_mmio(dev, base, |
| &logicvc_gpio_regmap_config); |
| if (IS_ERR(logicvc->regmap)) { |
| dev_err(dev, "Failed to create regmap for I/O\n"); |
| return PTR_ERR(logicvc->regmap); |
| } |
| } |
| |
| logicvc->chip.parent = dev; |
| logicvc->chip.owner = THIS_MODULE; |
| logicvc->chip.label = dev_name(dev); |
| logicvc->chip.base = -1; |
| logicvc->chip.ngpio = LOGICVC_CTRL_GPIO_BITS + |
| LOGICVC_POWER_CTRL_GPIO_BITS; |
| logicvc->chip.get = logicvc_gpio_get; |
| logicvc->chip.set = logicvc_gpio_set; |
| logicvc->chip.direction_output = logicvc_gpio_direction_output; |
| |
| platform_set_drvdata(pdev, logicvc); |
| |
| return devm_gpiochip_add_data(dev, &logicvc->chip, logicvc); |
| } |
| |
| static const struct of_device_id logicivc_gpio_of_table[] = { |
| { |
| .compatible = "xylon,logicvc-3.02.a-gpio", |
| }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, logicivc_gpio_of_table); |
| |
| static struct platform_driver logicvc_gpio_driver = { |
| .driver = { |
| .name = "gpio-logicvc", |
| .of_match_table = logicivc_gpio_of_table, |
| }, |
| .probe = logicvc_gpio_probe, |
| }; |
| |
| module_platform_driver(logicvc_gpio_driver); |
| |
| MODULE_AUTHOR("Paul Kocialkowski <paul.kocialkowski@bootlin.com>"); |
| MODULE_DESCRIPTION("Xylon LogiCVC GPIO driver"); |
| MODULE_LICENSE("GPL"); |