| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * dell-smm-hwmon.c -- Linux driver for accessing the SMM BIOS on Dell laptops. |
| * |
| * Copyright (C) 2001 Massimo Dal Zotto <dz@debian.org> |
| * |
| * Hwmon integration: |
| * Copyright (C) 2011 Jean Delvare <jdelvare@suse.de> |
| * Copyright (C) 2013, 2014 Guenter Roeck <linux@roeck-us.net> |
| * Copyright (C) 2014, 2015 Pali Rohár <pali@kernel.org> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/cpu.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/dmi.h> |
| #include <linux/capability.h> |
| #include <linux/mutex.h> |
| #include <linux/hwmon.h> |
| #include <linux/uaccess.h> |
| #include <linux/io.h> |
| #include <linux/sched.h> |
| #include <linux/ctype.h> |
| #include <linux/smp.h> |
| |
| #include <linux/i8k.h> |
| |
| #define I8K_SMM_FN_STATUS 0x0025 |
| #define I8K_SMM_POWER_STATUS 0x0069 |
| #define I8K_SMM_SET_FAN 0x01a3 |
| #define I8K_SMM_GET_FAN 0x00a3 |
| #define I8K_SMM_GET_SPEED 0x02a3 |
| #define I8K_SMM_GET_FAN_TYPE 0x03a3 |
| #define I8K_SMM_GET_NOM_SPEED 0x04a3 |
| #define I8K_SMM_GET_TEMP 0x10a3 |
| #define I8K_SMM_GET_TEMP_TYPE 0x11a3 |
| #define I8K_SMM_GET_DELL_SIG1 0xfea3 |
| #define I8K_SMM_GET_DELL_SIG2 0xffa3 |
| |
| #define I8K_FAN_MULT 30 |
| #define I8K_FAN_MAX_RPM 30000 |
| #define I8K_MAX_TEMP 127 |
| |
| #define I8K_FN_NONE 0x00 |
| #define I8K_FN_UP 0x01 |
| #define I8K_FN_DOWN 0x02 |
| #define I8K_FN_MUTE 0x04 |
| #define I8K_FN_MASK 0x07 |
| #define I8K_FN_SHIFT 8 |
| |
| #define I8K_POWER_AC 0x05 |
| #define I8K_POWER_BATTERY 0x01 |
| |
| #define DELL_SMM_NO_TEMP 10 |
| #define DELL_SMM_NO_FANS 3 |
| |
| struct dell_smm_data { |
| struct mutex i8k_mutex; /* lock for sensors writes */ |
| char bios_version[4]; |
| char bios_machineid[16]; |
| uint i8k_fan_mult; |
| uint i8k_pwm_mult; |
| uint i8k_fan_max; |
| bool disallow_fan_type_call; |
| bool disallow_fan_support; |
| unsigned int manual_fan; |
| unsigned int auto_fan; |
| int temp_type[DELL_SMM_NO_TEMP]; |
| bool fan[DELL_SMM_NO_FANS]; |
| int fan_type[DELL_SMM_NO_FANS]; |
| }; |
| |
| MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)"); |
| MODULE_AUTHOR("Pali Rohár <pali@kernel.org>"); |
| MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("i8k"); |
| |
| static bool force; |
| module_param(force, bool, 0); |
| MODULE_PARM_DESC(force, "Force loading without checking for supported models"); |
| |
| static bool ignore_dmi; |
| module_param(ignore_dmi, bool, 0); |
| MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match"); |
| |
| #if IS_ENABLED(CONFIG_I8K) |
| static bool restricted = true; |
| module_param(restricted, bool, 0); |
| MODULE_PARM_DESC(restricted, "Restrict fan control and serial number to CAP_SYS_ADMIN (default: 1)"); |
| |
| static bool power_status; |
| module_param(power_status, bool, 0600); |
| MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k (default: 0)"); |
| #endif |
| |
| static uint fan_mult; |
| module_param(fan_mult, uint, 0); |
| MODULE_PARM_DESC(fan_mult, "Factor to multiply fan speed with (default: autodetect)"); |
| |
| static uint fan_max; |
| module_param(fan_max, uint, 0); |
| MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)"); |
| |
| struct smm_regs { |
| unsigned int eax; |
| unsigned int ebx __packed; |
| unsigned int ecx __packed; |
| unsigned int edx __packed; |
| unsigned int esi __packed; |
| unsigned int edi __packed; |
| }; |
| |
| static const char * const temp_labels[] = { |
| "CPU", |
| "GPU", |
| "SODIMM", |
| "Other", |
| "Ambient", |
| "Other", |
| }; |
| |
| static const char * const fan_labels[] = { |
| "Processor Fan", |
| "Motherboard Fan", |
| "Video Fan", |
| "Power Supply Fan", |
| "Chipset Fan", |
| "Other Fan", |
| }; |
| |
| static const char * const docking_labels[] = { |
| "Docking Processor Fan", |
| "Docking Motherboard Fan", |
| "Docking Video Fan", |
| "Docking Power Supply Fan", |
| "Docking Chipset Fan", |
| "Docking Other Fan", |
| }; |
| |
| static inline const char __init *i8k_get_dmi_data(int field) |
| { |
| const char *dmi_data = dmi_get_system_info(field); |
| |
| return dmi_data && *dmi_data ? dmi_data : "?"; |
| } |
| |
| /* |
| * Call the System Management Mode BIOS. Code provided by Jonathan Buzzard. |
| */ |
| static int i8k_smm_func(void *par) |
| { |
| ktime_t calltime = ktime_get(); |
| struct smm_regs *regs = par; |
| int eax = regs->eax; |
| int ebx = regs->ebx; |
| long long duration; |
| int rc; |
| |
| /* SMM requires CPU 0 */ |
| if (smp_processor_id() != 0) |
| return -EBUSY; |
| |
| #if defined(CONFIG_X86_64) |
| asm volatile("pushq %%rax\n\t" |
| "movl 0(%%rax),%%edx\n\t" |
| "pushq %%rdx\n\t" |
| "movl 4(%%rax),%%ebx\n\t" |
| "movl 8(%%rax),%%ecx\n\t" |
| "movl 12(%%rax),%%edx\n\t" |
| "movl 16(%%rax),%%esi\n\t" |
| "movl 20(%%rax),%%edi\n\t" |
| "popq %%rax\n\t" |
| "out %%al,$0xb2\n\t" |
| "out %%al,$0x84\n\t" |
| "xchgq %%rax,(%%rsp)\n\t" |
| "movl %%ebx,4(%%rax)\n\t" |
| "movl %%ecx,8(%%rax)\n\t" |
| "movl %%edx,12(%%rax)\n\t" |
| "movl %%esi,16(%%rax)\n\t" |
| "movl %%edi,20(%%rax)\n\t" |
| "popq %%rdx\n\t" |
| "movl %%edx,0(%%rax)\n\t" |
| "pushfq\n\t" |
| "popq %%rax\n\t" |
| "andl $1,%%eax\n" |
| : "=a"(rc) |
| : "a"(regs) |
| : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory"); |
| #else |
| asm volatile("pushl %%eax\n\t" |
| "movl 0(%%eax),%%edx\n\t" |
| "push %%edx\n\t" |
| "movl 4(%%eax),%%ebx\n\t" |
| "movl 8(%%eax),%%ecx\n\t" |
| "movl 12(%%eax),%%edx\n\t" |
| "movl 16(%%eax),%%esi\n\t" |
| "movl 20(%%eax),%%edi\n\t" |
| "popl %%eax\n\t" |
| "out %%al,$0xb2\n\t" |
| "out %%al,$0x84\n\t" |
| "xchgl %%eax,(%%esp)\n\t" |
| "movl %%ebx,4(%%eax)\n\t" |
| "movl %%ecx,8(%%eax)\n\t" |
| "movl %%edx,12(%%eax)\n\t" |
| "movl %%esi,16(%%eax)\n\t" |
| "movl %%edi,20(%%eax)\n\t" |
| "popl %%edx\n\t" |
| "movl %%edx,0(%%eax)\n\t" |
| "lahf\n\t" |
| "shrl $8,%%eax\n\t" |
| "andl $1,%%eax\n" |
| : "=a"(rc) |
| : "a"(regs) |
| : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory"); |
| #endif |
| if (rc != 0 || (regs->eax & 0xffff) == 0xffff || regs->eax == eax) |
| rc = -EINVAL; |
| |
| duration = ktime_us_delta(ktime_get(), calltime); |
| pr_debug("smm(0x%.4x 0x%.4x) = 0x%.4x (took %7lld usecs)\n", eax, ebx, |
| (rc ? 0xffff : regs->eax & 0xffff), duration); |
| |
| return rc; |
| } |
| |
| /* |
| * Call the System Management Mode BIOS. |
| */ |
| static int i8k_smm(struct smm_regs *regs) |
| { |
| int ret; |
| |
| cpus_read_lock(); |
| ret = smp_call_on_cpu(0, i8k_smm_func, regs, true); |
| cpus_read_unlock(); |
| |
| return ret; |
| } |
| |
| /* |
| * Read the fan status. |
| */ |
| static int i8k_get_fan_status(const struct dell_smm_data *data, int fan) |
| { |
| struct smm_regs regs = { .eax = I8K_SMM_GET_FAN, }; |
| |
| if (data->disallow_fan_support) |
| return -EINVAL; |
| |
| regs.ebx = fan & 0xff; |
| return i8k_smm(®s) ? : regs.eax & 0xff; |
| } |
| |
| /* |
| * Read the fan speed in RPM. |
| */ |
| static int i8k_get_fan_speed(const struct dell_smm_data *data, int fan) |
| { |
| struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, }; |
| |
| if (data->disallow_fan_support) |
| return -EINVAL; |
| |
| regs.ebx = fan & 0xff; |
| return i8k_smm(®s) ? : (regs.eax & 0xffff) * data->i8k_fan_mult; |
| } |
| |
| /* |
| * Read the fan type. |
| */ |
| static int _i8k_get_fan_type(const struct dell_smm_data *data, int fan) |
| { |
| struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, }; |
| |
| if (data->disallow_fan_support || data->disallow_fan_type_call) |
| return -EINVAL; |
| |
| regs.ebx = fan & 0xff; |
| return i8k_smm(®s) ? : regs.eax & 0xff; |
| } |
| |
| static int i8k_get_fan_type(struct dell_smm_data *data, int fan) |
| { |
| /* I8K_SMM_GET_FAN_TYPE SMM call is expensive, so cache values */ |
| if (data->fan_type[fan] == INT_MIN) |
| data->fan_type[fan] = _i8k_get_fan_type(data, fan); |
| |
| return data->fan_type[fan]; |
| } |
| |
| /* |
| * Read the fan nominal rpm for specific fan speed. |
| */ |
| static int __init i8k_get_fan_nominal_speed(const struct dell_smm_data *data, int fan, int speed) |
| { |
| struct smm_regs regs = { .eax = I8K_SMM_GET_NOM_SPEED, }; |
| |
| if (data->disallow_fan_support) |
| return -EINVAL; |
| |
| regs.ebx = (fan & 0xff) | (speed << 8); |
| return i8k_smm(®s) ? : (regs.eax & 0xffff) * data->i8k_fan_mult; |
| } |
| |
| /* |
| * Enable or disable automatic BIOS fan control support |
| */ |
| static int i8k_enable_fan_auto_mode(const struct dell_smm_data *data, bool enable) |
| { |
| struct smm_regs regs = { }; |
| |
| if (data->disallow_fan_support) |
| return -EINVAL; |
| |
| regs.eax = enable ? data->auto_fan : data->manual_fan; |
| return i8k_smm(®s); |
| } |
| |
| /* |
| * Set the fan speed (off, low, high). Returns the new fan status. |
| */ |
| static int i8k_set_fan(const struct dell_smm_data *data, int fan, int speed) |
| { |
| struct smm_regs regs = { .eax = I8K_SMM_SET_FAN, }; |
| |
| if (data->disallow_fan_support) |
| return -EINVAL; |
| |
| speed = (speed < 0) ? 0 : ((speed > data->i8k_fan_max) ? data->i8k_fan_max : speed); |
| regs.ebx = (fan & 0xff) | (speed << 8); |
| |
| return i8k_smm(®s) ? : i8k_get_fan_status(data, fan); |
| } |
| |
| static int __init i8k_get_temp_type(int sensor) |
| { |
| struct smm_regs regs = { .eax = I8K_SMM_GET_TEMP_TYPE, }; |
| |
| regs.ebx = sensor & 0xff; |
| return i8k_smm(®s) ? : regs.eax & 0xff; |
| } |
| |
| /* |
| * Read the cpu temperature. |
| */ |
| static int _i8k_get_temp(int sensor) |
| { |
| struct smm_regs regs = { |
| .eax = I8K_SMM_GET_TEMP, |
| .ebx = sensor & 0xff, |
| }; |
| |
| return i8k_smm(®s) ? : regs.eax & 0xff; |
| } |
| |
| static int i8k_get_temp(int sensor) |
| { |
| int temp = _i8k_get_temp(sensor); |
| |
| /* |
| * Sometimes the temperature sensor returns 0x99, which is out of range. |
| * In this case we retry (once) before returning an error. |
| # 1003655137 00000058 00005a4b |
| # 1003655138 00000099 00003a80 <--- 0x99 = 153 degrees |
| # 1003655139 00000054 00005c52 |
| */ |
| if (temp == 0x99) { |
| msleep(100); |
| temp = _i8k_get_temp(sensor); |
| } |
| /* |
| * Return -ENODATA for all invalid temperatures. |
| * |
| * Known instances are the 0x99 value as seen above as well as |
| * 0xc1 (193), which may be returned when trying to read the GPU |
| * temperature if the system supports a GPU and it is currently |
| * turned off. |
| */ |
| if (temp > I8K_MAX_TEMP) |
| return -ENODATA; |
| |
| return temp; |
| } |
| |
| static int __init i8k_get_dell_signature(int req_fn) |
| { |
| struct smm_regs regs = { .eax = req_fn, }; |
| int rc; |
| |
| rc = i8k_smm(®s); |
| if (rc < 0) |
| return rc; |
| |
| return regs.eax == 1145651527 && regs.edx == 1145392204 ? 0 : -1; |
| } |
| |
| #if IS_ENABLED(CONFIG_I8K) |
| |
| /* |
| * Read the Fn key status. |
| */ |
| static int i8k_get_fn_status(void) |
| { |
| struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, }; |
| int rc; |
| |
| rc = i8k_smm(®s); |
| if (rc < 0) |
| return rc; |
| |
| switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) { |
| case I8K_FN_UP: |
| return I8K_VOL_UP; |
| case I8K_FN_DOWN: |
| return I8K_VOL_DOWN; |
| case I8K_FN_MUTE: |
| return I8K_VOL_MUTE; |
| default: |
| return 0; |
| } |
| } |
| |
| /* |
| * Read the power status. |
| */ |
| static int i8k_get_power_status(void) |
| { |
| struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, }; |
| int rc; |
| |
| rc = i8k_smm(®s); |
| if (rc < 0) |
| return rc; |
| |
| return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY; |
| } |
| |
| /* |
| * Procfs interface |
| */ |
| |
| static int |
| i8k_ioctl_unlocked(struct file *fp, struct dell_smm_data *data, unsigned int cmd, unsigned long arg) |
| { |
| int val = 0; |
| int speed; |
| unsigned char buff[16]; |
| int __user *argp = (int __user *)arg; |
| |
| if (!argp) |
| return -EINVAL; |
| |
| switch (cmd) { |
| case I8K_BIOS_VERSION: |
| if (!isdigit(data->bios_version[0]) || !isdigit(data->bios_version[1]) || |
| !isdigit(data->bios_version[2])) |
| return -EINVAL; |
| |
| val = (data->bios_version[0] << 16) | |
| (data->bios_version[1] << 8) | data->bios_version[2]; |
| break; |
| |
| case I8K_MACHINE_ID: |
| if (restricted && !capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| memset(buff, 0, sizeof(buff)); |
| strscpy(buff, data->bios_machineid, sizeof(buff)); |
| break; |
| |
| case I8K_FN_STATUS: |
| val = i8k_get_fn_status(); |
| break; |
| |
| case I8K_POWER_STATUS: |
| val = i8k_get_power_status(); |
| break; |
| |
| case I8K_GET_TEMP: |
| val = i8k_get_temp(0); |
| break; |
| |
| case I8K_GET_SPEED: |
| if (copy_from_user(&val, argp, sizeof(int))) |
| return -EFAULT; |
| |
| val = i8k_get_fan_speed(data, val); |
| break; |
| |
| case I8K_GET_FAN: |
| if (copy_from_user(&val, argp, sizeof(int))) |
| return -EFAULT; |
| |
| val = i8k_get_fan_status(data, val); |
| break; |
| |
| case I8K_SET_FAN: |
| if (restricted && !capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| if (copy_from_user(&val, argp, sizeof(int))) |
| return -EFAULT; |
| |
| if (copy_from_user(&speed, argp + 1, sizeof(int))) |
| return -EFAULT; |
| |
| val = i8k_set_fan(data, val, speed); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| if (val < 0) |
| return val; |
| |
| switch (cmd) { |
| case I8K_BIOS_VERSION: |
| if (copy_to_user(argp, &val, 4)) |
| return -EFAULT; |
| |
| break; |
| case I8K_MACHINE_ID: |
| if (copy_to_user(argp, buff, 16)) |
| return -EFAULT; |
| |
| break; |
| default: |
| if (copy_to_user(argp, &val, sizeof(int))) |
| return -EFAULT; |
| |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) |
| { |
| struct dell_smm_data *data = PDE_DATA(file_inode(fp)); |
| long ret; |
| |
| mutex_lock(&data->i8k_mutex); |
| ret = i8k_ioctl_unlocked(fp, data, cmd, arg); |
| mutex_unlock(&data->i8k_mutex); |
| |
| return ret; |
| } |
| |
| /* |
| * Print the information for /proc/i8k. |
| */ |
| static int i8k_proc_show(struct seq_file *seq, void *offset) |
| { |
| struct dell_smm_data *data = seq->private; |
| int fn_key, cpu_temp, ac_power; |
| int left_fan, right_fan, left_speed, right_speed; |
| |
| cpu_temp = i8k_get_temp(0); /* 11100 µs */ |
| left_fan = i8k_get_fan_status(data, I8K_FAN_LEFT); /* 580 µs */ |
| right_fan = i8k_get_fan_status(data, I8K_FAN_RIGHT); /* 580 µs */ |
| left_speed = i8k_get_fan_speed(data, I8K_FAN_LEFT); /* 580 µs */ |
| right_speed = i8k_get_fan_speed(data, I8K_FAN_RIGHT); /* 580 µs */ |
| fn_key = i8k_get_fn_status(); /* 750 µs */ |
| if (power_status) |
| ac_power = i8k_get_power_status(); /* 14700 µs */ |
| else |
| ac_power = -1; |
| |
| /* |
| * Info: |
| * |
| * 1) Format version (this will change if format changes) |
| * 2) BIOS version |
| * 3) BIOS machine ID |
| * 4) Cpu temperature |
| * 5) Left fan status |
| * 6) Right fan status |
| * 7) Left fan speed |
| * 8) Right fan speed |
| * 9) AC power |
| * 10) Fn Key status |
| */ |
| seq_printf(seq, "%s %s %s %d %d %d %d %d %d %d\n", |
| I8K_PROC_FMT, |
| data->bios_version, |
| (restricted && !capable(CAP_SYS_ADMIN)) ? "-1" : data->bios_machineid, |
| cpu_temp, |
| left_fan, right_fan, left_speed, right_speed, |
| ac_power, fn_key); |
| |
| return 0; |
| } |
| |
| static int i8k_open_fs(struct inode *inode, struct file *file) |
| { |
| return single_open(file, i8k_proc_show, PDE_DATA(inode)); |
| } |
| |
| static const struct proc_ops i8k_proc_ops = { |
| .proc_open = i8k_open_fs, |
| .proc_read = seq_read, |
| .proc_lseek = seq_lseek, |
| .proc_release = single_release, |
| .proc_ioctl = i8k_ioctl, |
| }; |
| |
| static void i8k_exit_procfs(void *param) |
| { |
| remove_proc_entry("i8k", NULL); |
| } |
| |
| static void __init i8k_init_procfs(struct device *dev) |
| { |
| struct dell_smm_data *data = dev_get_drvdata(dev); |
| |
| /* Register the proc entry */ |
| proc_create_data("i8k", 0, NULL, &i8k_proc_ops, data); |
| |
| devm_add_action_or_reset(dev, i8k_exit_procfs, NULL); |
| } |
| |
| #else |
| |
| static void __init i8k_init_procfs(struct device *dev) |
| { |
| } |
| |
| #endif |
| |
| /* |
| * Hwmon interface |
| */ |
| |
| static umode_t dell_smm_is_visible(const void *drvdata, enum hwmon_sensor_types type, u32 attr, |
| int channel) |
| { |
| const struct dell_smm_data *data = drvdata; |
| |
| switch (type) { |
| case hwmon_temp: |
| switch (attr) { |
| case hwmon_temp_input: |
| case hwmon_temp_label: |
| if (data->temp_type[channel] >= 0) |
| return 0444; |
| |
| break; |
| default: |
| break; |
| } |
| break; |
| case hwmon_fan: |
| if (data->disallow_fan_support) |
| break; |
| |
| switch (attr) { |
| case hwmon_fan_input: |
| if (data->fan[channel]) |
| return 0444; |
| |
| break; |
| case hwmon_fan_label: |
| if (data->fan[channel] && !data->disallow_fan_type_call) |
| return 0444; |
| |
| break; |
| default: |
| break; |
| } |
| break; |
| case hwmon_pwm: |
| if (data->disallow_fan_support) |
| break; |
| |
| switch (attr) { |
| case hwmon_pwm_input: |
| if (data->fan[channel]) |
| return 0644; |
| |
| break; |
| case hwmon_pwm_enable: |
| if (data->auto_fan) |
| /* |
| * There is no command for retrieve the current status |
| * from BIOS, and userspace/firmware itself can change |
| * it. |
| * Thus we can only provide write-only access for now. |
| */ |
| return 0200; |
| |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int dell_smm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, |
| long *val) |
| { |
| struct dell_smm_data *data = dev_get_drvdata(dev); |
| int ret; |
| |
| switch (type) { |
| case hwmon_temp: |
| switch (attr) { |
| case hwmon_temp_input: |
| ret = i8k_get_temp(channel); |
| if (ret < 0) |
| return ret; |
| |
| *val = ret * 1000; |
| |
| return 0; |
| default: |
| break; |
| } |
| break; |
| case hwmon_fan: |
| switch (attr) { |
| case hwmon_fan_input: |
| ret = i8k_get_fan_speed(data, channel); |
| if (ret < 0) |
| return ret; |
| |
| *val = ret; |
| |
| return 0; |
| default: |
| break; |
| } |
| break; |
| case hwmon_pwm: |
| switch (attr) { |
| case hwmon_pwm_input: |
| ret = i8k_get_fan_status(data, channel); |
| if (ret < 0) |
| return ret; |
| |
| *val = clamp_val(ret * data->i8k_pwm_mult, 0, 255); |
| |
| return 0; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return -EOPNOTSUPP; |
| } |
| |
| static const char *dell_smm_fan_label(struct dell_smm_data *data, int channel) |
| { |
| bool dock = false; |
| int type = i8k_get_fan_type(data, channel); |
| |
| if (type < 0) |
| return ERR_PTR(type); |
| |
| if (type & 0x10) { |
| dock = true; |
| type &= 0x0F; |
| } |
| |
| if (type >= ARRAY_SIZE(fan_labels)) |
| type = ARRAY_SIZE(fan_labels) - 1; |
| |
| return dock ? docking_labels[type] : fan_labels[type]; |
| } |
| |
| static int dell_smm_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr, |
| int channel, const char **str) |
| { |
| struct dell_smm_data *data = dev_get_drvdata(dev); |
| |
| switch (type) { |
| case hwmon_temp: |
| switch (attr) { |
| case hwmon_temp_label: |
| *str = temp_labels[data->temp_type[channel]]; |
| return 0; |
| default: |
| break; |
| } |
| break; |
| case hwmon_fan: |
| switch (attr) { |
| case hwmon_fan_label: |
| *str = dell_smm_fan_label(data, channel); |
| return PTR_ERR_OR_ZERO(*str); |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return -EOPNOTSUPP; |
| } |
| |
| static int dell_smm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, |
| long val) |
| { |
| struct dell_smm_data *data = dev_get_drvdata(dev); |
| unsigned long pwm; |
| bool enable; |
| int err; |
| |
| switch (type) { |
| case hwmon_pwm: |
| switch (attr) { |
| case hwmon_pwm_input: |
| pwm = clamp_val(DIV_ROUND_CLOSEST(val, data->i8k_pwm_mult), 0, |
| data->i8k_fan_max); |
| |
| mutex_lock(&data->i8k_mutex); |
| err = i8k_set_fan(data, channel, pwm); |
| mutex_unlock(&data->i8k_mutex); |
| |
| if (err < 0) |
| return err; |
| |
| return 0; |
| case hwmon_pwm_enable: |
| if (!val) |
| return -EINVAL; |
| |
| if (val == 1) |
| enable = false; |
| else |
| enable = true; |
| |
| mutex_lock(&data->i8k_mutex); |
| err = i8k_enable_fan_auto_mode(data, enable); |
| mutex_unlock(&data->i8k_mutex); |
| |
| if (err < 0) |
| return err; |
| |
| return 0; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return -EOPNOTSUPP; |
| } |
| |
| static const struct hwmon_ops dell_smm_ops = { |
| .is_visible = dell_smm_is_visible, |
| .read = dell_smm_read, |
| .read_string = dell_smm_read_string, |
| .write = dell_smm_write, |
| }; |
| |
| static const struct hwmon_channel_info *dell_smm_info[] = { |
| HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL |
| ), |
| HWMON_CHANNEL_INFO(fan, |
| HWMON_F_INPUT | HWMON_F_LABEL, |
| HWMON_F_INPUT | HWMON_F_LABEL, |
| HWMON_F_INPUT | HWMON_F_LABEL |
| ), |
| HWMON_CHANNEL_INFO(pwm, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT |
| ), |
| NULL |
| }; |
| |
| static const struct hwmon_chip_info dell_smm_chip_info = { |
| .ops = &dell_smm_ops, |
| .info = dell_smm_info, |
| }; |
| |
| static int __init dell_smm_init_hwmon(struct device *dev) |
| { |
| struct dell_smm_data *data = dev_get_drvdata(dev); |
| struct device *dell_smm_hwmon_dev; |
| int i, err; |
| |
| for (i = 0; i < DELL_SMM_NO_TEMP; i++) { |
| data->temp_type[i] = i8k_get_temp_type(i); |
| if (data->temp_type[i] < 0) |
| continue; |
| |
| if (data->temp_type[i] >= ARRAY_SIZE(temp_labels)) |
| data->temp_type[i] = ARRAY_SIZE(temp_labels) - 1; |
| } |
| |
| for (i = 0; i < DELL_SMM_NO_FANS; i++) { |
| data->fan_type[i] = INT_MIN; |
| err = i8k_get_fan_status(data, i); |
| if (err < 0) |
| err = i8k_get_fan_type(data, i); |
| if (err >= 0) |
| data->fan[i] = true; |
| } |
| |
| dell_smm_hwmon_dev = devm_hwmon_device_register_with_info(dev, "dell_smm", data, |
| &dell_smm_chip_info, NULL); |
| |
| return PTR_ERR_OR_ZERO(dell_smm_hwmon_dev); |
| } |
| |
| struct i8k_config_data { |
| uint fan_mult; |
| uint fan_max; |
| }; |
| |
| enum i8k_configs { |
| DELL_LATITUDE_D520, |
| DELL_PRECISION_490, |
| DELL_STUDIO, |
| DELL_XPS, |
| }; |
| |
| static const struct i8k_config_data i8k_config_data[] __initconst = { |
| [DELL_LATITUDE_D520] = { |
| .fan_mult = 1, |
| .fan_max = I8K_FAN_TURBO, |
| }, |
| [DELL_PRECISION_490] = { |
| .fan_mult = 1, |
| .fan_max = I8K_FAN_TURBO, |
| }, |
| [DELL_STUDIO] = { |
| .fan_mult = 1, |
| .fan_max = I8K_FAN_HIGH, |
| }, |
| [DELL_XPS] = { |
| .fan_mult = 1, |
| .fan_max = I8K_FAN_HIGH, |
| }, |
| }; |
| |
| static const struct dmi_system_id i8k_dmi_table[] __initconst = { |
| { |
| .ident = "Dell Inspiron", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron"), |
| }, |
| }, |
| { |
| .ident = "Dell Latitude", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Latitude"), |
| }, |
| }, |
| { |
| .ident = "Dell Inspiron 2", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron"), |
| }, |
| }, |
| { |
| .ident = "Dell Latitude D520", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D520"), |
| }, |
| .driver_data = (void *)&i8k_config_data[DELL_LATITUDE_D520], |
| }, |
| { |
| .ident = "Dell Latitude 2", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Latitude"), |
| }, |
| }, |
| { /* UK Inspiron 6400 */ |
| .ident = "Dell Inspiron 3", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MM061"), |
| }, |
| }, |
| { |
| .ident = "Dell Inspiron 3", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MP061"), |
| }, |
| }, |
| { |
| .ident = "Dell Precision 490", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, |
| "Precision WorkStation 490"), |
| }, |
| .driver_data = (void *)&i8k_config_data[DELL_PRECISION_490], |
| }, |
| { |
| .ident = "Dell Precision", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Precision"), |
| }, |
| }, |
| { |
| .ident = "Dell Vostro", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Vostro"), |
| }, |
| }, |
| { |
| .ident = "Dell Studio", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Studio"), |
| }, |
| .driver_data = (void *)&i8k_config_data[DELL_STUDIO], |
| }, |
| { |
| .ident = "Dell XPS M140", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MXC051"), |
| }, |
| .driver_data = (void *)&i8k_config_data[DELL_XPS], |
| }, |
| { |
| .ident = "Dell XPS", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "XPS"), |
| }, |
| }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(dmi, i8k_dmi_table); |
| |
| /* |
| * On some machines once I8K_SMM_GET_FAN_TYPE is issued then CPU fan speed |
| * randomly going up and down due to bug in Dell SMM or BIOS. Here is blacklist |
| * of affected Dell machines for which we disallow I8K_SMM_GET_FAN_TYPE call. |
| * See bug: https://bugzilla.kernel.org/show_bug.cgi?id=100121 |
| */ |
| static const struct dmi_system_id i8k_blacklist_fan_type_dmi_table[] __initconst = { |
| { |
| .ident = "Dell Studio XPS 8000", |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8000"), |
| }, |
| }, |
| { |
| .ident = "Dell Studio XPS 8100", |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8100"), |
| }, |
| }, |
| { |
| .ident = "Dell Inspiron 580", |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Inspiron 580 "), |
| }, |
| }, |
| { } |
| }; |
| |
| /* |
| * On some machines all fan related SMM functions implemented by Dell BIOS |
| * firmware freeze kernel for about 500ms. Until Dell fixes these problems fan |
| * support for affected blacklisted Dell machines stay disabled. |
| * See bug: https://bugzilla.kernel.org/show_bug.cgi?id=195751 |
| */ |
| static const struct dmi_system_id i8k_blacklist_fan_support_dmi_table[] __initconst = { |
| { |
| .ident = "Dell Inspiron 7720", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Inspiron 7720"), |
| }, |
| }, |
| { |
| .ident = "Dell Vostro 3360", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Vostro 3360"), |
| }, |
| }, |
| { |
| .ident = "Dell XPS13 9333", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "XPS13 9333"), |
| }, |
| }, |
| { |
| .ident = "Dell XPS 15 L502X", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Dell System XPS L502X"), |
| }, |
| }, |
| { } |
| }; |
| |
| struct i8k_fan_control_data { |
| unsigned int manual_fan; |
| unsigned int auto_fan; |
| }; |
| |
| enum i8k_fan_controls { |
| I8K_FAN_34A3_35A3, |
| }; |
| |
| static const struct i8k_fan_control_data i8k_fan_control_data[] __initconst = { |
| [I8K_FAN_34A3_35A3] = { |
| .manual_fan = 0x34a3, |
| .auto_fan = 0x35a3, |
| }, |
| }; |
| |
| static const struct dmi_system_id i8k_whitelist_fan_control[] __initconst = { |
| { |
| .ident = "Dell Latitude 5480", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude 5480"), |
| }, |
| .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], |
| }, |
| { |
| .ident = "Dell Latitude E6440", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude E6440"), |
| }, |
| .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], |
| }, |
| { |
| .ident = "Dell Latitude E7440", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude E7440"), |
| }, |
| .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], |
| }, |
| { |
| .ident = "Dell Precision 5530", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Precision 5530"), |
| }, |
| .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], |
| }, |
| { |
| .ident = "Dell Precision 7510", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Precision 7510"), |
| }, |
| .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], |
| }, |
| { } |
| }; |
| |
| static int __init dell_smm_probe(struct platform_device *pdev) |
| { |
| struct dell_smm_data *data; |
| const struct dmi_system_id *id, *fan_control; |
| int fan, ret; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(struct dell_smm_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| mutex_init(&data->i8k_mutex); |
| data->i8k_fan_mult = I8K_FAN_MULT; |
| data->i8k_fan_max = I8K_FAN_HIGH; |
| platform_set_drvdata(pdev, data); |
| |
| if (dmi_check_system(i8k_blacklist_fan_support_dmi_table)) { |
| dev_warn(&pdev->dev, "broken Dell BIOS detected, disallow fan support\n"); |
| if (!force) |
| data->disallow_fan_support = true; |
| } |
| |
| if (dmi_check_system(i8k_blacklist_fan_type_dmi_table)) { |
| dev_warn(&pdev->dev, "broken Dell BIOS detected, disallow fan type call\n"); |
| if (!force) |
| data->disallow_fan_type_call = true; |
| } |
| |
| strscpy(data->bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION), |
| sizeof(data->bios_version)); |
| strscpy(data->bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL), |
| sizeof(data->bios_machineid)); |
| |
| /* |
| * Set fan multiplier and maximal fan speed from dmi config |
| * Values specified in module parameters override values from dmi |
| */ |
| id = dmi_first_match(i8k_dmi_table); |
| if (id && id->driver_data) { |
| const struct i8k_config_data *conf = id->driver_data; |
| |
| if (!fan_mult && conf->fan_mult) |
| fan_mult = conf->fan_mult; |
| |
| if (!fan_max && conf->fan_max) |
| fan_max = conf->fan_max; |
| } |
| |
| data->i8k_fan_max = fan_max ? : I8K_FAN_HIGH; /* Must not be 0 */ |
| data->i8k_pwm_mult = DIV_ROUND_UP(255, data->i8k_fan_max); |
| |
| fan_control = dmi_first_match(i8k_whitelist_fan_control); |
| if (fan_control && fan_control->driver_data) { |
| const struct i8k_fan_control_data *control = fan_control->driver_data; |
| |
| data->manual_fan = control->manual_fan; |
| data->auto_fan = control->auto_fan; |
| dev_info(&pdev->dev, "enabling support for setting automatic/manual fan control\n"); |
| } |
| |
| if (!fan_mult) { |
| /* |
| * Autodetect fan multiplier based on nominal rpm |
| * If fan reports rpm value too high then set multiplier to 1 |
| */ |
| for (fan = 0; fan < DELL_SMM_NO_FANS; ++fan) { |
| ret = i8k_get_fan_nominal_speed(data, fan, data->i8k_fan_max); |
| if (ret < 0) |
| continue; |
| |
| if (ret > I8K_FAN_MAX_RPM) |
| data->i8k_fan_mult = 1; |
| break; |
| } |
| } else { |
| /* Fan multiplier was specified in module param or in dmi */ |
| data->i8k_fan_mult = fan_mult; |
| } |
| |
| ret = dell_smm_init_hwmon(&pdev->dev); |
| if (ret) |
| return ret; |
| |
| i8k_init_procfs(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver dell_smm_driver = { |
| .driver = { |
| .name = KBUILD_MODNAME, |
| }, |
| }; |
| |
| static struct platform_device *dell_smm_device; |
| |
| /* |
| * Probe for the presence of a supported laptop. |
| */ |
| static int __init i8k_init(void) |
| { |
| /* |
| * Get DMI information |
| */ |
| if (!dmi_check_system(i8k_dmi_table)) { |
| if (!ignore_dmi && !force) |
| return -ENODEV; |
| |
| pr_info("not running on a supported Dell system.\n"); |
| pr_info("vendor=%s, model=%s, version=%s\n", |
| i8k_get_dmi_data(DMI_SYS_VENDOR), |
| i8k_get_dmi_data(DMI_PRODUCT_NAME), |
| i8k_get_dmi_data(DMI_BIOS_VERSION)); |
| } |
| |
| /* |
| * Get SMM Dell signature |
| */ |
| if (i8k_get_dell_signature(I8K_SMM_GET_DELL_SIG1) && |
| i8k_get_dell_signature(I8K_SMM_GET_DELL_SIG2)) { |
| pr_err("unable to get SMM Dell signature\n"); |
| if (!force) |
| return -ENODEV; |
| } |
| |
| dell_smm_device = platform_create_bundle(&dell_smm_driver, dell_smm_probe, NULL, 0, NULL, |
| 0); |
| |
| return PTR_ERR_OR_ZERO(dell_smm_device); |
| } |
| |
| static void __exit i8k_exit(void) |
| { |
| platform_device_unregister(dell_smm_device); |
| platform_driver_unregister(&dell_smm_driver); |
| } |
| |
| module_init(i8k_init); |
| module_exit(i8k_exit); |