| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Lochnagar hardware monitoring features |
| * |
| * Copyright (c) 2016-2019 Cirrus Logic, Inc. and |
| * Cirrus Logic International Semiconductor Ltd. |
| * |
| * Author: Lucas Tanure <tanureal@opensource.cirrus.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/i2c.h> |
| #include <linux/math64.h> |
| #include <linux/mfd/lochnagar.h> |
| #include <linux/mfd/lochnagar2_regs.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| #define LN2_MAX_NSAMPLE 1023 |
| #define LN2_SAMPLE_US 1670 |
| |
| #define LN2_CURR_UNITS 1000 |
| #define LN2_VOLT_UNITS 1000 |
| #define LN2_TEMP_UNITS 1000 |
| #define LN2_PWR_UNITS 1000000 |
| |
| static const char * const lochnagar_chan_names[] = { |
| "DBVDD1", |
| "1V8 DSP", |
| "1V8 CDC", |
| "VDDCORE DSP", |
| "AVDD 1V8", |
| "SYSVDD", |
| "VDDCORE CDC", |
| "MICVDD", |
| }; |
| |
| struct lochnagar_hwmon { |
| struct regmap *regmap; |
| |
| long power_nsamples[ARRAY_SIZE(lochnagar_chan_names)]; |
| |
| /* Lock to ensure only a single sensor is read at a time */ |
| struct mutex sensor_lock; |
| }; |
| |
| enum lochnagar_measure_mode { |
| LN2_CURR = 0, |
| LN2_VOLT, |
| LN2_TEMP, |
| }; |
| |
| /** |
| * float_to_long - Convert ieee754 reading from hardware to an integer |
| * |
| * @data: Value read from the hardware |
| * @precision: Units to multiply up to eg. 1000 = milli, 1000000 = micro |
| * |
| * Return: Converted integer reading |
| * |
| * Depending on the measurement type the hardware returns an ieee754 |
| * floating point value in either volts, amps or celsius. This function |
| * will convert that into an integer in a smaller unit such as micro-amps |
| * or milli-celsius. The hardware does not return NaN, so consideration of |
| * that is not required. |
| */ |
| static long float_to_long(u32 data, u32 precision) |
| { |
| u64 man = data & 0x007FFFFF; |
| int exp = ((data & 0x7F800000) >> 23) - 127 - 23; |
| bool negative = data & 0x80000000; |
| long result; |
| |
| man = (man + (1 << 23)) * precision; |
| |
| if (fls64(man) + exp > (int)sizeof(long) * 8 - 1) |
| result = LONG_MAX; |
| else if (exp < 0) |
| result = (man + (1ull << (-exp - 1))) >> -exp; |
| else |
| result = man << exp; |
| |
| return negative ? -result : result; |
| } |
| |
| static int do_measurement(struct regmap *regmap, int chan, |
| enum lochnagar_measure_mode mode, int nsamples) |
| { |
| unsigned int val; |
| int ret; |
| |
| chan = 1 << (chan + LOCHNAGAR2_IMON_MEASURED_CHANNELS_SHIFT); |
| |
| ret = regmap_write(regmap, LOCHNAGAR2_IMON_CTRL1, |
| LOCHNAGAR2_IMON_ENA_MASK | chan | mode); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_write(regmap, LOCHNAGAR2_IMON_CTRL2, nsamples); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_write(regmap, LOCHNAGAR2_IMON_CTRL3, |
| LOCHNAGAR2_IMON_CONFIGURE_MASK); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read_poll_timeout(regmap, LOCHNAGAR2_IMON_CTRL3, val, |
| val & LOCHNAGAR2_IMON_DONE_MASK, |
| 1000, 10000); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_write(regmap, LOCHNAGAR2_IMON_CTRL3, |
| LOCHNAGAR2_IMON_MEASURE_MASK); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * Actual measurement time is ~1.67mS per sample, approximate this |
| * with a 1.5mS per sample msleep and then poll for success up to |
| * ~0.17mS * 1023 (LN2_MAX_NSAMPLES). Normally for smaller values |
| * of nsamples the poll will complete on the first loop due to |
| * other latency in the system. |
| */ |
| msleep((nsamples * 3) / 2); |
| |
| ret = regmap_read_poll_timeout(regmap, LOCHNAGAR2_IMON_CTRL3, val, |
| val & LOCHNAGAR2_IMON_DONE_MASK, |
| 5000, 200000); |
| if (ret < 0) |
| return ret; |
| |
| return regmap_write(regmap, LOCHNAGAR2_IMON_CTRL3, 0); |
| } |
| |
| static int request_data(struct regmap *regmap, int chan, u32 *data) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_write(regmap, LOCHNAGAR2_IMON_CTRL4, |
| LOCHNAGAR2_IMON_DATA_REQ_MASK | |
| chan << LOCHNAGAR2_IMON_CH_SEL_SHIFT); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read_poll_timeout(regmap, LOCHNAGAR2_IMON_CTRL4, val, |
| val & LOCHNAGAR2_IMON_DATA_RDY_MASK, |
| 1000, 10000); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read(regmap, LOCHNAGAR2_IMON_DATA1, &val); |
| if (ret < 0) |
| return ret; |
| |
| *data = val << 16; |
| |
| ret = regmap_read(regmap, LOCHNAGAR2_IMON_DATA2, &val); |
| if (ret < 0) |
| return ret; |
| |
| *data |= val; |
| |
| return regmap_write(regmap, LOCHNAGAR2_IMON_CTRL4, 0); |
| } |
| |
| static int read_sensor(struct device *dev, int chan, |
| enum lochnagar_measure_mode mode, int nsamples, |
| unsigned int precision, long *val) |
| { |
| struct lochnagar_hwmon *priv = dev_get_drvdata(dev); |
| struct regmap *regmap = priv->regmap; |
| u32 data; |
| int ret; |
| |
| mutex_lock(&priv->sensor_lock); |
| |
| ret = do_measurement(regmap, chan, mode, nsamples); |
| if (ret < 0) { |
| dev_err(dev, "Failed to perform measurement: %d\n", ret); |
| goto error; |
| } |
| |
| ret = request_data(regmap, chan, &data); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read measurement: %d\n", ret); |
| goto error; |
| } |
| |
| *val = float_to_long(data, precision); |
| |
| error: |
| mutex_unlock(&priv->sensor_lock); |
| |
| return ret; |
| } |
| |
| static int read_power(struct device *dev, int chan, long *val) |
| { |
| struct lochnagar_hwmon *priv = dev_get_drvdata(dev); |
| int nsamples = priv->power_nsamples[chan]; |
| u64 power; |
| int ret; |
| |
| if (!strcmp("SYSVDD", lochnagar_chan_names[chan])) { |
| power = 5 * LN2_PWR_UNITS; |
| } else { |
| ret = read_sensor(dev, chan, LN2_VOLT, 1, LN2_PWR_UNITS, val); |
| if (ret < 0) |
| return ret; |
| |
| power = abs(*val); |
| } |
| |
| ret = read_sensor(dev, chan, LN2_CURR, nsamples, LN2_PWR_UNITS, val); |
| if (ret < 0) |
| return ret; |
| |
| power *= abs(*val); |
| power = DIV_ROUND_CLOSEST_ULL(power, LN2_PWR_UNITS); |
| |
| if (power > LONG_MAX) |
| *val = LONG_MAX; |
| else |
| *val = power; |
| |
| return 0; |
| } |
| |
| static umode_t lochnagar_is_visible(const void *drvdata, |
| enum hwmon_sensor_types type, |
| u32 attr, int chan) |
| { |
| switch (type) { |
| case hwmon_in: |
| if (!strcmp("SYSVDD", lochnagar_chan_names[chan])) |
| return 0; |
| break; |
| case hwmon_power: |
| if (attr == hwmon_power_average_interval) |
| return 0644; |
| break; |
| default: |
| break; |
| } |
| |
| return 0444; |
| } |
| |
| static int lochnagar_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int chan, long *val) |
| { |
| struct lochnagar_hwmon *priv = dev_get_drvdata(dev); |
| int interval; |
| |
| switch (type) { |
| case hwmon_in: |
| return read_sensor(dev, chan, LN2_VOLT, 1, LN2_VOLT_UNITS, val); |
| case hwmon_curr: |
| return read_sensor(dev, chan, LN2_CURR, 1, LN2_CURR_UNITS, val); |
| case hwmon_temp: |
| return read_sensor(dev, chan, LN2_TEMP, 1, LN2_TEMP_UNITS, val); |
| case hwmon_power: |
| switch (attr) { |
| case hwmon_power_average: |
| return read_power(dev, chan, val); |
| case hwmon_power_average_interval: |
| interval = priv->power_nsamples[chan] * LN2_SAMPLE_US; |
| *val = DIV_ROUND_CLOSEST(interval, 1000); |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int lochnagar_read_string(struct device *dev, |
| enum hwmon_sensor_types type, u32 attr, |
| int chan, const char **str) |
| { |
| switch (type) { |
| case hwmon_in: |
| case hwmon_curr: |
| case hwmon_power: |
| *str = lochnagar_chan_names[chan]; |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int lochnagar_write(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int chan, long val) |
| { |
| struct lochnagar_hwmon *priv = dev_get_drvdata(dev); |
| |
| if (type != hwmon_power || attr != hwmon_power_average_interval) |
| return -EOPNOTSUPP; |
| |
| val = clamp_t(long, val, 1, (LN2_MAX_NSAMPLE * LN2_SAMPLE_US) / 1000); |
| val = DIV_ROUND_CLOSEST(val * 1000, LN2_SAMPLE_US); |
| |
| priv->power_nsamples[chan] = val; |
| |
| return 0; |
| } |
| |
| static const struct hwmon_ops lochnagar_ops = { |
| .is_visible = lochnagar_is_visible, |
| .read = lochnagar_read, |
| .read_string = lochnagar_read_string, |
| .write = lochnagar_write, |
| }; |
| |
| static const struct hwmon_channel_info *lochnagar_info[] = { |
| HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), |
| HWMON_CHANNEL_INFO(in, HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL), |
| HWMON_CHANNEL_INFO(curr, HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL), |
| HWMON_CHANNEL_INFO(power, HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | |
| HWMON_P_LABEL, |
| HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | |
| HWMON_P_LABEL, |
| HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | |
| HWMON_P_LABEL, |
| HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | |
| HWMON_P_LABEL, |
| HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | |
| HWMON_P_LABEL, |
| HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | |
| HWMON_P_LABEL, |
| HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | |
| HWMON_P_LABEL, |
| HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | |
| HWMON_P_LABEL), |
| NULL |
| }; |
| |
| static const struct hwmon_chip_info lochnagar_chip_info = { |
| .ops = &lochnagar_ops, |
| .info = lochnagar_info, |
| }; |
| |
| static const struct of_device_id lochnagar_of_match[] = { |
| { .compatible = "cirrus,lochnagar2-hwmon" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, lochnagar_of_match); |
| |
| static int lochnagar_hwmon_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device *hwmon_dev; |
| struct lochnagar_hwmon *priv; |
| int i; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| mutex_init(&priv->sensor_lock); |
| |
| priv->regmap = dev_get_regmap(dev->parent, NULL); |
| if (!priv->regmap) { |
| dev_err(dev, "No register map found\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(priv->power_nsamples); i++) |
| priv->power_nsamples[i] = 96; |
| |
| hwmon_dev = devm_hwmon_device_register_with_info(dev, "Lochnagar", priv, |
| &lochnagar_chip_info, |
| NULL); |
| |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static struct platform_driver lochnagar_hwmon_driver = { |
| .driver = { |
| .name = "lochnagar-hwmon", |
| .of_match_table = lochnagar_of_match, |
| }, |
| .probe = lochnagar_hwmon_probe, |
| }; |
| module_platform_driver(lochnagar_hwmon_driver); |
| |
| MODULE_AUTHOR("Lucas Tanure <tanureal@opensource.cirrus.com>"); |
| MODULE_DESCRIPTION("Lochnagar hardware monitoring features"); |
| MODULE_LICENSE("GPL"); |