| // SPDX-License-Identifier: GPL-2.0-or-later |
| // |
| // Copyright (C) 2018 ROHM Semiconductors |
| // |
| // RTC driver for ROHM BD71828 and BD71815 PMIC |
| |
| #include <linux/bcd.h> |
| #include <linux/mfd/rohm-bd71815.h> |
| #include <linux/mfd/rohm-bd71828.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/rtc.h> |
| |
| /* |
| * On BD71828 and BD71815 the ALM0 MASK is 14 bytes after the ALM0 |
| * block start |
| */ |
| #define BD718XX_ALM_EN_OFFSET 14 |
| |
| /* |
| * We read regs RTC_SEC => RTC_YEAR |
| * this struct is ordered according to chip registers. |
| * Keep it u8 only (or packed) to avoid padding issues. |
| */ |
| struct bd70528_rtc_day { |
| u8 sec; |
| u8 min; |
| u8 hour; |
| } __packed; |
| |
| struct bd70528_rtc_data { |
| struct bd70528_rtc_day time; |
| u8 week; |
| u8 day; |
| u8 month; |
| u8 year; |
| } __packed; |
| |
| struct bd71828_rtc_alm { |
| struct bd70528_rtc_data alm0; |
| struct bd70528_rtc_data alm1; |
| u8 alm_mask; |
| u8 alm1_mask; |
| } __packed; |
| |
| struct bd70528_rtc { |
| struct rohm_regmap_dev *parent; |
| struct regmap *regmap; |
| struct device *dev; |
| u8 reg_time_start; |
| u8 bd718xx_alm_block_start; |
| }; |
| |
| static inline void tmday2rtc(struct rtc_time *t, struct bd70528_rtc_day *d) |
| { |
| d->sec &= ~BD70528_MASK_RTC_SEC; |
| d->min &= ~BD70528_MASK_RTC_MINUTE; |
| d->hour &= ~BD70528_MASK_RTC_HOUR; |
| d->sec |= bin2bcd(t->tm_sec); |
| d->min |= bin2bcd(t->tm_min); |
| d->hour |= bin2bcd(t->tm_hour); |
| } |
| |
| static inline void tm2rtc(struct rtc_time *t, struct bd70528_rtc_data *r) |
| { |
| r->day &= ~BD70528_MASK_RTC_DAY; |
| r->week &= ~BD70528_MASK_RTC_WEEK; |
| r->month &= ~BD70528_MASK_RTC_MONTH; |
| /* |
| * PM and 24H bits are not used by Wake - thus we clear them |
| * here and not in tmday2rtc() which is also used by wake. |
| */ |
| r->time.hour &= ~(BD70528_MASK_RTC_HOUR_PM | BD70528_MASK_RTC_HOUR_24H); |
| |
| tmday2rtc(t, &r->time); |
| /* |
| * We do always set time in 24H mode. |
| */ |
| r->time.hour |= BD70528_MASK_RTC_HOUR_24H; |
| r->day |= bin2bcd(t->tm_mday); |
| r->week |= bin2bcd(t->tm_wday); |
| r->month |= bin2bcd(t->tm_mon + 1); |
| r->year = bin2bcd(t->tm_year - 100); |
| } |
| |
| static inline void rtc2tm(struct bd70528_rtc_data *r, struct rtc_time *t) |
| { |
| t->tm_sec = bcd2bin(r->time.sec & BD70528_MASK_RTC_SEC); |
| t->tm_min = bcd2bin(r->time.min & BD70528_MASK_RTC_MINUTE); |
| t->tm_hour = bcd2bin(r->time.hour & BD70528_MASK_RTC_HOUR); |
| /* |
| * If RTC is in 12H mode, then bit BD70528_MASK_RTC_HOUR_PM |
| * is not BCD value but tells whether it is AM or PM |
| */ |
| if (!(r->time.hour & BD70528_MASK_RTC_HOUR_24H)) { |
| t->tm_hour %= 12; |
| if (r->time.hour & BD70528_MASK_RTC_HOUR_PM) |
| t->tm_hour += 12; |
| } |
| t->tm_mday = bcd2bin(r->day & BD70528_MASK_RTC_DAY); |
| t->tm_mon = bcd2bin(r->month & BD70528_MASK_RTC_MONTH) - 1; |
| t->tm_year = 100 + bcd2bin(r->year & BD70528_MASK_RTC_YEAR); |
| t->tm_wday = bcd2bin(r->week & BD70528_MASK_RTC_WEEK); |
| } |
| |
| static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a) |
| { |
| int ret; |
| struct bd71828_rtc_alm alm; |
| struct bd70528_rtc *r = dev_get_drvdata(dev); |
| |
| ret = regmap_bulk_read(r->regmap, r->bd718xx_alm_block_start, &alm, |
| sizeof(alm)); |
| if (ret) { |
| dev_err(dev, "Failed to read alarm regs\n"); |
| return ret; |
| } |
| |
| tm2rtc(&a->time, &alm.alm0); |
| |
| if (!a->enabled) |
| alm.alm_mask &= ~BD70528_MASK_ALM_EN; |
| else |
| alm.alm_mask |= BD70528_MASK_ALM_EN; |
| |
| ret = regmap_bulk_write(r->regmap, r->bd718xx_alm_block_start, &alm, |
| sizeof(alm)); |
| if (ret) |
| dev_err(dev, "Failed to set alarm time\n"); |
| |
| return ret; |
| |
| } |
| |
| static int bd71828_read_alarm(struct device *dev, struct rtc_wkalrm *a) |
| { |
| int ret; |
| struct bd71828_rtc_alm alm; |
| struct bd70528_rtc *r = dev_get_drvdata(dev); |
| |
| ret = regmap_bulk_read(r->regmap, r->bd718xx_alm_block_start, &alm, |
| sizeof(alm)); |
| if (ret) { |
| dev_err(dev, "Failed to read alarm regs\n"); |
| return ret; |
| } |
| |
| rtc2tm(&alm.alm0, &a->time); |
| a->time.tm_mday = -1; |
| a->time.tm_mon = -1; |
| a->time.tm_year = -1; |
| a->enabled = !!(alm.alm_mask & BD70528_MASK_ALM_EN); |
| a->pending = 0; |
| |
| return 0; |
| } |
| |
| static int bd71828_set_time(struct device *dev, struct rtc_time *t) |
| { |
| int ret; |
| struct bd70528_rtc_data rtc_data; |
| struct bd70528_rtc *r = dev_get_drvdata(dev); |
| |
| ret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data, |
| sizeof(rtc_data)); |
| if (ret) { |
| dev_err(dev, "Failed to read RTC time registers\n"); |
| return ret; |
| } |
| tm2rtc(t, &rtc_data); |
| |
| ret = regmap_bulk_write(r->regmap, r->reg_time_start, &rtc_data, |
| sizeof(rtc_data)); |
| if (ret) |
| dev_err(dev, "Failed to set RTC time\n"); |
| |
| return ret; |
| } |
| |
| static int bd70528_get_time(struct device *dev, struct rtc_time *t) |
| { |
| struct bd70528_rtc *r = dev_get_drvdata(dev); |
| struct bd70528_rtc_data rtc_data; |
| int ret; |
| |
| /* read the RTC date and time registers all at once */ |
| ret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data, |
| sizeof(rtc_data)); |
| if (ret) { |
| dev_err(dev, "Failed to read RTC time (err %d)\n", ret); |
| return ret; |
| } |
| |
| rtc2tm(&rtc_data, t); |
| |
| return 0; |
| } |
| |
| static int bd71828_alm_enable(struct device *dev, unsigned int enabled) |
| { |
| int ret; |
| struct bd70528_rtc *r = dev_get_drvdata(dev); |
| unsigned int enableval = BD70528_MASK_ALM_EN; |
| |
| if (!enabled) |
| enableval = 0; |
| |
| ret = regmap_update_bits(r->regmap, r->bd718xx_alm_block_start + |
| BD718XX_ALM_EN_OFFSET, BD70528_MASK_ALM_EN, |
| enableval); |
| if (ret) |
| dev_err(dev, "Failed to change alarm state\n"); |
| |
| return ret; |
| } |
| |
| static const struct rtc_class_ops bd71828_rtc_ops = { |
| .read_time = bd70528_get_time, |
| .set_time = bd71828_set_time, |
| .read_alarm = bd71828_read_alarm, |
| .set_alarm = bd71828_set_alarm, |
| .alarm_irq_enable = bd71828_alm_enable, |
| }; |
| |
| static irqreturn_t alm_hndlr(int irq, void *data) |
| { |
| struct rtc_device *rtc = data; |
| |
| rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF | RTC_PF); |
| return IRQ_HANDLED; |
| } |
| |
| static int bd70528_probe(struct platform_device *pdev) |
| { |
| struct bd70528_rtc *bd_rtc; |
| const struct rtc_class_ops *rtc_ops; |
| const char *irq_name; |
| int ret; |
| struct rtc_device *rtc; |
| int irq; |
| unsigned int hr; |
| u8 hour_reg; |
| enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data; |
| |
| bd_rtc = devm_kzalloc(&pdev->dev, sizeof(*bd_rtc), GFP_KERNEL); |
| if (!bd_rtc) |
| return -ENOMEM; |
| |
| bd_rtc->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!bd_rtc->regmap) { |
| dev_err(&pdev->dev, "No regmap\n"); |
| return -EINVAL; |
| } |
| |
| bd_rtc->dev = &pdev->dev; |
| rtc_ops = &bd71828_rtc_ops; |
| |
| switch (chip) { |
| case ROHM_CHIP_TYPE_BD71815: |
| irq_name = "bd71815-rtc-alm-0"; |
| bd_rtc->reg_time_start = BD71815_REG_RTC_START; |
| |
| /* |
| * See also BD718XX_ALM_EN_OFFSET: |
| * This works for BD71828 and BD71815 as they have same offset |
| * between ALM0 start and ALM0_MASK. If new ICs are to be |
| * added this requires proper check as ALM0_MASK is not located |
| * at the end of ALM0 block - but after all ALM blocks so if |
| * amount of ALMs differ the offset to enable/disable is likely |
| * to be incorrect and enable/disable must be given as own |
| * reg address here. |
| */ |
| bd_rtc->bd718xx_alm_block_start = BD71815_REG_RTC_ALM_START; |
| hour_reg = BD71815_REG_HOUR; |
| break; |
| case ROHM_CHIP_TYPE_BD71828: |
| irq_name = "bd71828-rtc-alm-0"; |
| bd_rtc->reg_time_start = BD71828_REG_RTC_START; |
| bd_rtc->bd718xx_alm_block_start = BD71828_REG_RTC_ALM_START; |
| hour_reg = BD71828_REG_RTC_HOUR; |
| break; |
| default: |
| dev_err(&pdev->dev, "Unknown chip\n"); |
| return -ENOENT; |
| } |
| |
| irq = platform_get_irq_byname(pdev, irq_name); |
| |
| if (irq < 0) |
| return irq; |
| |
| platform_set_drvdata(pdev, bd_rtc); |
| |
| ret = regmap_read(bd_rtc->regmap, hour_reg, &hr); |
| |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to reag RTC clock\n"); |
| return ret; |
| } |
| |
| if (!(hr & BD70528_MASK_RTC_HOUR_24H)) { |
| struct rtc_time t; |
| |
| ret = rtc_ops->read_time(&pdev->dev, &t); |
| |
| if (!ret) |
| ret = rtc_ops->set_time(&pdev->dev, &t); |
| |
| if (ret) { |
| dev_err(&pdev->dev, |
| "Setting 24H clock for RTC failed\n"); |
| return ret; |
| } |
| } |
| |
| device_set_wakeup_capable(&pdev->dev, true); |
| device_wakeup_enable(&pdev->dev); |
| |
| rtc = devm_rtc_allocate_device(&pdev->dev); |
| if (IS_ERR(rtc)) { |
| dev_err(&pdev->dev, "RTC device creation failed\n"); |
| return PTR_ERR(rtc); |
| } |
| |
| rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; |
| rtc->range_max = RTC_TIMESTAMP_END_2099; |
| rtc->ops = rtc_ops; |
| |
| /* Request alarm IRQ prior to registerig the RTC */ |
| ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, &alm_hndlr, |
| IRQF_ONESHOT, "bd70528-rtc", rtc); |
| if (ret) |
| return ret; |
| |
| return devm_rtc_register_device(rtc); |
| } |
| |
| static const struct platform_device_id bd718x7_rtc_id[] = { |
| { "bd71828-rtc", ROHM_CHIP_TYPE_BD71828 }, |
| { "bd71815-rtc", ROHM_CHIP_TYPE_BD71815 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(platform, bd718x7_rtc_id); |
| |
| static struct platform_driver bd70528_rtc = { |
| .driver = { |
| .name = "bd70528-rtc" |
| }, |
| .probe = bd70528_probe, |
| .id_table = bd718x7_rtc_id, |
| }; |
| |
| module_platform_driver(bd70528_rtc); |
| |
| MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); |
| MODULE_DESCRIPTION("ROHM BD71828 and BD71815 PMIC RTC driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:bd70528-rtc"); |