| # SPDX-License-Identifier: GPL-2.0-only |
| menuconfig IP_SET |
| tristate "IP set support" |
| depends on INET && NETFILTER |
| select NETFILTER_NETLINK |
| help |
| This option adds IP set support to the kernel. |
| In order to define and use the sets, you need the userspace utility |
| ipset(8). You can use the sets in netfilter via the "set" match |
| and "SET" target. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| if IP_SET |
| |
| config IP_SET_MAX |
| int "Maximum number of IP sets" |
| default 256 |
| range 2 65534 |
| depends on IP_SET |
| help |
| You can define here default value of the maximum number |
| of IP sets for the kernel. |
| |
| The value can be overridden by the 'max_sets' module |
| parameter of the 'ip_set' module. |
| |
| config IP_SET_BITMAP_IP |
| tristate "bitmap:ip set support" |
| depends on IP_SET |
| help |
| This option adds the bitmap:ip set type support, by which one |
| can store IPv4 addresses (or network addresse) from a range. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_BITMAP_IPMAC |
| tristate "bitmap:ip,mac set support" |
| depends on IP_SET |
| help |
| This option adds the bitmap:ip,mac set type support, by which one |
| can store IPv4 address and (source) MAC address pairs from a range. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_BITMAP_PORT |
| tristate "bitmap:port set support" |
| depends on IP_SET |
| help |
| This option adds the bitmap:port set type support, by which one |
| can store TCP/UDP port numbers from a range. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_IP |
| tristate "hash:ip set support" |
| depends on IP_SET |
| help |
| This option adds the hash:ip set type support, by which one |
| can store arbitrary IPv4 or IPv6 addresses (or network addresses) |
| in a set. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_IPMARK |
| tristate "hash:ip,mark set support" |
| depends on IP_SET |
| help |
| This option adds the hash:ip,mark set type support, by which one |
| can store IPv4/IPv6 address and mark pairs. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_IPPORT |
| tristate "hash:ip,port set support" |
| depends on IP_SET |
| help |
| This option adds the hash:ip,port set type support, by which one |
| can store IPv4/IPv6 address and protocol/port pairs. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_IPPORTIP |
| tristate "hash:ip,port,ip set support" |
| depends on IP_SET |
| help |
| This option adds the hash:ip,port,ip set type support, by which |
| one can store IPv4/IPv6 address, protocol/port, and IPv4/IPv6 |
| address triples in a set. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_IPPORTNET |
| tristate "hash:ip,port,net set support" |
| depends on IP_SET |
| help |
| This option adds the hash:ip,port,net set type support, by which |
| one can store IPv4/IPv6 address, protocol/port, and IPv4/IPv6 |
| network address/prefix triples in a set. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_IPMAC |
| tristate "hash:ip,mac set support" |
| depends on IP_SET |
| help |
| This option adds the hash:ip,mac set type support, by which |
| one can store IPv4/IPv6 address and MAC (ethernet address) pairs in a set. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_MAC |
| tristate "hash:mac set support" |
| depends on IP_SET |
| help |
| This option adds the hash:mac set type support, by which |
| one can store MAC (ethernet address) elements in a set. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_NETPORTNET |
| tristate "hash:net,port,net set support" |
| depends on IP_SET |
| help |
| This option adds the hash:net,port,net set type support, by which |
| one can store two IPv4/IPv6 subnets, and a protocol/port in a set. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_NET |
| tristate "hash:net set support" |
| depends on IP_SET |
| help |
| This option adds the hash:net set type support, by which |
| one can store IPv4/IPv6 network address/prefix elements in a set. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_NETNET |
| tristate "hash:net,net set support" |
| depends on IP_SET |
| help |
| This option adds the hash:net,net set type support, by which |
| one can store IPv4/IPv6 network address/prefix pairs in a set. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_NETPORT |
| tristate "hash:net,port set support" |
| depends on IP_SET |
| help |
| This option adds the hash:net,port set type support, by which |
| one can store IPv4/IPv6 network address/prefix and |
| protocol/port pairs as elements in a set. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_HASH_NETIFACE |
| tristate "hash:net,iface set support" |
| depends on IP_SET |
| help |
| This option adds the hash:net,iface set type support, by which |
| one can store IPv4/IPv6 network address/prefix and |
| interface name pairs as elements in a set. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP_SET_LIST_SET |
| tristate "list:set set support" |
| depends on IP_SET |
| help |
| This option adds the list:set set type support. In this |
| kind of set one can store the name of other sets and it forms |
| an ordered union of the member sets. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| endif # IP_SET |