blob: fbd2b51810ca0f2223a0129a3beac9bbb1433c61 [file] [log] [blame]
/*
* Copyright © 2013 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Shobhit Kumar <shobhit.kumar@intel.com>
* Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>
*/
#include <linux/kernel.h>
#include "intel_drv.h"
#include "i915_drv.h"
#include "intel_dsi.h"
#define DSI_HSS_PACKET_SIZE 4
#define DSI_HSE_PACKET_SIZE 4
#define DSI_HSA_PACKET_EXTRA_SIZE 6
#define DSI_HBP_PACKET_EXTRA_SIZE 6
#define DSI_HACTIVE_PACKET_EXTRA_SIZE 6
#define DSI_HFP_PACKET_EXTRA_SIZE 6
#define DSI_EOTP_PACKET_SIZE 4
static int dsi_pixel_format_bpp(int pixel_format)
{
int bpp;
switch (pixel_format) {
default:
case VID_MODE_FORMAT_RGB888:
case VID_MODE_FORMAT_RGB666_LOOSE:
bpp = 24;
break;
case VID_MODE_FORMAT_RGB666:
bpp = 18;
break;
case VID_MODE_FORMAT_RGB565:
bpp = 16;
break;
}
return bpp;
}
struct dsi_mnp {
u32 dsi_pll_ctrl;
u32 dsi_pll_div;
};
static const u32 lfsr_converts[] = {
426, 469, 234, 373, 442, 221, 110, 311, 411, /* 62 - 70 */
461, 486, 243, 377, 188, 350, 175, 343, 427, 213, /* 71 - 80 */
106, 53, 282, 397, 454, 227, 113, 56, 284, 142, /* 81 - 90 */
71, 35, 273, 136, 324, 418, 465, 488, 500, 506 /* 91 - 100 */
};
#ifdef DSI_CLK_FROM_RR
static u32 dsi_rr_formula(const struct drm_display_mode *mode,
int pixel_format, int video_mode_format,
int lane_count, bool eotp)
{
u32 bpp;
u32 hactive, vactive, hfp, hsync, hbp, vfp, vsync, vbp;
u32 hsync_bytes, hbp_bytes, hactive_bytes, hfp_bytes;
u32 bytes_per_line, bytes_per_frame;
u32 num_frames;
u32 bytes_per_x_frames, bytes_per_x_frames_x_lanes;
u32 dsi_bit_clock_hz;
u32 dsi_clk;
bpp = dsi_pixel_format_bpp(pixel_format);
hactive = mode->hdisplay;
vactive = mode->vdisplay;
hfp = mode->hsync_start - mode->hdisplay;
hsync = mode->hsync_end - mode->hsync_start;
hbp = mode->htotal - mode->hsync_end;
vfp = mode->vsync_start - mode->vdisplay;
vsync = mode->vsync_end - mode->vsync_start;
vbp = mode->vtotal - mode->vsync_end;
hsync_bytes = DIV_ROUND_UP(hsync * bpp, 8);
hbp_bytes = DIV_ROUND_UP(hbp * bpp, 8);
hactive_bytes = DIV_ROUND_UP(hactive * bpp, 8);
hfp_bytes = DIV_ROUND_UP(hfp * bpp, 8);
bytes_per_line = DSI_HSS_PACKET_SIZE + hsync_bytes +
DSI_HSA_PACKET_EXTRA_SIZE + DSI_HSE_PACKET_SIZE +
hbp_bytes + DSI_HBP_PACKET_EXTRA_SIZE +
hactive_bytes + DSI_HACTIVE_PACKET_EXTRA_SIZE +
hfp_bytes + DSI_HFP_PACKET_EXTRA_SIZE;
/*
* XXX: Need to accurately calculate LP to HS transition timeout and add
* it to bytes_per_line/bytes_per_frame.
*/
if (eotp && video_mode_format == VIDEO_MODE_BURST)
bytes_per_line += DSI_EOTP_PACKET_SIZE;
bytes_per_frame = vsync * bytes_per_line + vbp * bytes_per_line +
vactive * bytes_per_line + vfp * bytes_per_line;
if (eotp &&
(video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE ||
video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS))
bytes_per_frame += DSI_EOTP_PACKET_SIZE;
num_frames = drm_mode_vrefresh(mode);
bytes_per_x_frames = num_frames * bytes_per_frame;
bytes_per_x_frames_x_lanes = bytes_per_x_frames / lane_count;
/* the dsi clock is divided by 2 in the hardware to get dsi ddr clock */
dsi_bit_clock_hz = bytes_per_x_frames_x_lanes * 8;
dsi_clk = dsi_bit_clock_hz / 1000;
if (eotp && video_mode_format == VIDEO_MODE_BURST)
dsi_clk *= 2;
return dsi_clk;
}
#else
/* Get DSI clock from pixel clock */
static u32 dsi_clk_from_pclk(u32 pclk, int pixel_format, int lane_count)
{
u32 dsi_clk_khz;
u32 bpp = dsi_pixel_format_bpp(pixel_format);
/* DSI data rate = pixel clock * bits per pixel / lane count
pixel clock is converted from KHz to Hz */
dsi_clk_khz = DIV_ROUND_CLOSEST(pclk * bpp, lane_count);
return dsi_clk_khz;
}
#endif
static int dsi_calc_mnp(struct drm_i915_private *dev_priv,
struct dsi_mnp *dsi_mnp, int target_dsi_clk)
{
unsigned int calc_m = 0, calc_p = 0;
unsigned int m_min, m_max, p_min = 2, p_max = 6;
unsigned int m, n, p;
int ref_clk;
int delta = target_dsi_clk;
u32 m_seed;
/* target_dsi_clk is expected in kHz */
if (target_dsi_clk < 300000 || target_dsi_clk > 1150000) {
DRM_ERROR("DSI CLK Out of Range\n");
return -ECHRNG;
}
if (IS_CHERRYVIEW(dev_priv)) {
ref_clk = 100000;
n = 4;
m_min = 70;
m_max = 96;
} else {
ref_clk = 25000;
n = 1;
m_min = 62;
m_max = 92;
}
for (m = m_min; m <= m_max && delta; m++) {
for (p = p_min; p <= p_max && delta; p++) {
/*
* Find the optimal m and p divisors with minimal delta
* +/- the required clock
*/
int calc_dsi_clk = (m * ref_clk) / (p * n);
int d = abs(target_dsi_clk - calc_dsi_clk);
if (d < delta) {
delta = d;
calc_m = m;
calc_p = p;
}
}
}
/* register has log2(N1), this works fine for powers of two */
n = ffs(n) - 1;
m_seed = lfsr_converts[calc_m - 62];
dsi_mnp->dsi_pll_ctrl = 1 << (DSI_PLL_P1_POST_DIV_SHIFT + calc_p - 2);
dsi_mnp->dsi_pll_div = n << DSI_PLL_N1_DIV_SHIFT |
m_seed << DSI_PLL_M1_DIV_SHIFT;
return 0;
}
/*
* XXX: The muxing and gating is hard coded for now. Need to add support for
* sharing PLLs with two DSI outputs.
*/
static void vlv_configure_dsi_pll(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
int ret;
struct dsi_mnp dsi_mnp;
u32 dsi_clk;
dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format,
intel_dsi->lane_count);
ret = dsi_calc_mnp(dev_priv, &dsi_mnp, dsi_clk);
if (ret) {
DRM_DEBUG_KMS("dsi_calc_mnp failed\n");
return;
}
if (intel_dsi->ports & (1 << PORT_A))
dsi_mnp.dsi_pll_ctrl |= DSI_PLL_CLK_GATE_DSI0_DSIPLL;
if (intel_dsi->ports & (1 << PORT_C))
dsi_mnp.dsi_pll_ctrl |= DSI_PLL_CLK_GATE_DSI1_DSIPLL;
DRM_DEBUG_KMS("dsi pll div %08x, ctrl %08x\n",
dsi_mnp.dsi_pll_div, dsi_mnp.dsi_pll_ctrl);
vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, 0);
vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_DIVIDER, dsi_mnp.dsi_pll_div);
vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, dsi_mnp.dsi_pll_ctrl);
}
static void vlv_enable_dsi_pll(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
u32 tmp;
DRM_DEBUG_KMS("\n");
mutex_lock(&dev_priv->sb_lock);
vlv_configure_dsi_pll(encoder);
/* wait at least 0.5 us after ungating before enabling VCO */
usleep_range(1, 10);
tmp = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
tmp |= DSI_PLL_VCO_EN;
vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, tmp);
if (wait_for(vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL) &
DSI_PLL_LOCK, 20)) {
mutex_unlock(&dev_priv->sb_lock);
DRM_ERROR("DSI PLL lock failed\n");
return;
}
mutex_unlock(&dev_priv->sb_lock);
DRM_DEBUG_KMS("DSI PLL locked\n");
}
static void vlv_disable_dsi_pll(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
u32 tmp;
DRM_DEBUG_KMS("\n");
mutex_lock(&dev_priv->sb_lock);
tmp = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
tmp &= ~DSI_PLL_VCO_EN;
tmp |= DSI_PLL_LDO_GATE;
vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, tmp);
mutex_unlock(&dev_priv->sb_lock);
}
static void bxt_disable_dsi_pll(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
u32 val;
DRM_DEBUG_KMS("\n");
val = I915_READ(BXT_DSI_PLL_ENABLE);
val &= ~BXT_DSI_PLL_DO_ENABLE;
I915_WRITE(BXT_DSI_PLL_ENABLE, val);
/*
* PLL lock should deassert within 200us.
* Wait up to 1ms before timing out.
*/
if (wait_for((I915_READ(BXT_DSI_PLL_ENABLE)
& BXT_DSI_PLL_LOCKED) == 0, 1))
DRM_ERROR("Timeout waiting for PLL lock deassertion\n");
}
static void assert_bpp_mismatch(int pixel_format, int pipe_bpp)
{
int bpp = dsi_pixel_format_bpp(pixel_format);
WARN(bpp != pipe_bpp,
"bpp match assertion failure (expected %d, current %d)\n",
bpp, pipe_bpp);
}
u32 vlv_get_dsi_pclk(struct intel_encoder *encoder, int pipe_bpp)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
u32 dsi_clock, pclk;
u32 pll_ctl, pll_div;
u32 m = 0, p = 0, n;
int refclk = 25000;
int i;
DRM_DEBUG_KMS("\n");
mutex_lock(&dev_priv->sb_lock);
pll_ctl = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
pll_div = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_DIVIDER);
mutex_unlock(&dev_priv->sb_lock);
/* mask out other bits and extract the P1 divisor */
pll_ctl &= DSI_PLL_P1_POST_DIV_MASK;
pll_ctl = pll_ctl >> (DSI_PLL_P1_POST_DIV_SHIFT - 2);
/* N1 divisor */
n = (pll_div & DSI_PLL_N1_DIV_MASK) >> DSI_PLL_N1_DIV_SHIFT;
n = 1 << n; /* register has log2(N1) */
/* mask out the other bits and extract the M1 divisor */
pll_div &= DSI_PLL_M1_DIV_MASK;
pll_div = pll_div >> DSI_PLL_M1_DIV_SHIFT;
while (pll_ctl) {
pll_ctl = pll_ctl >> 1;
p++;
}
p--;
if (!p) {
DRM_ERROR("wrong P1 divisor\n");
return 0;
}
for (i = 0; i < ARRAY_SIZE(lfsr_converts); i++) {
if (lfsr_converts[i] == pll_div)
break;
}
if (i == ARRAY_SIZE(lfsr_converts)) {
DRM_ERROR("wrong m_seed programmed\n");
return 0;
}
m = i + 62;
dsi_clock = (m * refclk) / (p * n);
/* pixel_format and pipe_bpp should agree */
assert_bpp_mismatch(intel_dsi->pixel_format, pipe_bpp);
pclk = DIV_ROUND_CLOSEST(dsi_clock * intel_dsi->lane_count, pipe_bpp);
return pclk;
}
u32 bxt_get_dsi_pclk(struct intel_encoder *encoder, int pipe_bpp)
{
u32 pclk;
u32 dsi_clk;
u32 dsi_ratio;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
/* Divide by zero */
if (!pipe_bpp) {
DRM_ERROR("Invalid BPP(0)\n");
return 0;
}
dsi_ratio = I915_READ(BXT_DSI_PLL_CTL) &
BXT_DSI_PLL_RATIO_MASK;
/* Invalid DSI ratio ? */
if (dsi_ratio < BXT_DSI_PLL_RATIO_MIN ||
dsi_ratio > BXT_DSI_PLL_RATIO_MAX) {
DRM_ERROR("Invalid DSI pll ratio(%u) programmed\n", dsi_ratio);
return 0;
}
dsi_clk = (dsi_ratio * BXT_REF_CLOCK_KHZ) / 2;
/* pixel_format and pipe_bpp should agree */
assert_bpp_mismatch(intel_dsi->pixel_format, pipe_bpp);
pclk = DIV_ROUND_CLOSEST(dsi_clk * intel_dsi->lane_count, pipe_bpp);
DRM_DEBUG_DRIVER("Calculated pclk=%u\n", pclk);
return pclk;
}
static void vlv_dsi_reset_clocks(struct intel_encoder *encoder, enum port port)
{
u32 temp;
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
temp = I915_READ(MIPI_CTRL(port));
temp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
I915_WRITE(MIPI_CTRL(port), temp |
intel_dsi->escape_clk_div <<
ESCAPE_CLOCK_DIVIDER_SHIFT);
}
/* Program BXT Mipi clocks and dividers */
static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port)
{
u32 tmp;
u32 divider;
u32 dsi_rate;
u32 pll_ratio;
struct drm_i915_private *dev_priv = dev->dev_private;
/* Clear old configurations */
tmp = I915_READ(BXT_MIPI_CLOCK_CTL);
tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port));
tmp &= ~(BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port));
tmp &= ~(BXT_MIPI_ESCLK_VAR_DIV_MASK(port));
tmp &= ~(BXT_MIPI_DPHY_DIVIDER_MASK(port));
/* Get the current DSI rate(actual) */
pll_ratio = I915_READ(BXT_DSI_PLL_CTL) &
BXT_DSI_PLL_RATIO_MASK;
dsi_rate = (BXT_REF_CLOCK_KHZ * pll_ratio) / 2;
/* Max possible output of clock is 39.5 MHz, program value -1 */
divider = (dsi_rate / BXT_MAX_VAR_OUTPUT_KHZ) - 1;
tmp |= BXT_MIPI_ESCLK_VAR_DIV(port, divider);
/*
* Tx escape clock must be as close to 20MHz possible, but should
* not exceed it. Hence select divide by 2
*/
tmp |= BXT_MIPI_TX_ESCLK_8XDIV_BY2(port);
tmp |= BXT_MIPI_RX_ESCLK_8X_BY3(port);
I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp);
}
static bool bxt_configure_dsi_pll(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
u8 dsi_ratio;
u32 dsi_clk;
u32 val;
dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format,
intel_dsi->lane_count);
/*
* From clock diagram, to get PLL ratio divider, divide double of DSI
* link rate (i.e., 2*8x=16x frequency value) by ref clock. Make sure to
* round 'up' the result
*/
dsi_ratio = DIV_ROUND_UP(dsi_clk * 2, BXT_REF_CLOCK_KHZ);
if (dsi_ratio < BXT_DSI_PLL_RATIO_MIN ||
dsi_ratio > BXT_DSI_PLL_RATIO_MAX) {
DRM_ERROR("Cant get a suitable ratio from DSI PLL ratios\n");
return false;
}
/*
* Program DSI ratio and Select MIPIC and MIPIA PLL output as 8x
* Spec says both have to be programmed, even if one is not getting
* used. Configure MIPI_CLOCK_CTL dividers in modeset
*/
val = I915_READ(BXT_DSI_PLL_CTL);
val &= ~BXT_DSI_PLL_PVD_RATIO_MASK;
val &= ~BXT_DSI_FREQ_SEL_MASK;
val &= ~BXT_DSI_PLL_RATIO_MASK;
val |= (dsi_ratio | BXT_DSIA_16X_BY2 | BXT_DSIC_16X_BY2);
/* As per recommendation from hardware team,
* Prog PVD ratio =1 if dsi ratio <= 50
*/
if (dsi_ratio <= 50) {
val &= ~BXT_DSI_PLL_PVD_RATIO_MASK;
val |= BXT_DSI_PLL_PVD_RATIO_1;
}
I915_WRITE(BXT_DSI_PLL_CTL, val);
POSTING_READ(BXT_DSI_PLL_CTL);
return true;
}
static void bxt_enable_dsi_pll(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 val;
DRM_DEBUG_KMS("\n");
val = I915_READ(BXT_DSI_PLL_ENABLE);
if (val & BXT_DSI_PLL_DO_ENABLE) {
WARN(1, "DSI PLL already enabled. Disabling it.\n");
val &= ~BXT_DSI_PLL_DO_ENABLE;
I915_WRITE(BXT_DSI_PLL_ENABLE, val);
}
/* Configure PLL vales */
if (!bxt_configure_dsi_pll(encoder)) {
DRM_ERROR("Configure DSI PLL failed, abort PLL enable\n");
return;
}
/* Program TX, RX, Dphy clocks */
for_each_dsi_port(port, intel_dsi->ports)
bxt_dsi_program_clocks(encoder->base.dev, port);
/* Enable DSI PLL */
val = I915_READ(BXT_DSI_PLL_ENABLE);
val |= BXT_DSI_PLL_DO_ENABLE;
I915_WRITE(BXT_DSI_PLL_ENABLE, val);
/* Timeout and fail if PLL not locked */
if (wait_for(I915_READ(BXT_DSI_PLL_ENABLE) & BXT_DSI_PLL_LOCKED, 1)) {
DRM_ERROR("Timed out waiting for DSI PLL to lock\n");
return;
}
DRM_DEBUG_KMS("DSI PLL locked\n");
}
void intel_enable_dsi_pll(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
vlv_enable_dsi_pll(encoder);
else if (IS_BROXTON(dev))
bxt_enable_dsi_pll(encoder);
}
void intel_disable_dsi_pll(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
vlv_disable_dsi_pll(encoder);
else if (IS_BROXTON(dev))
bxt_disable_dsi_pll(encoder);
}
static void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port)
{
u32 tmp;
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
/* Clear old configurations */
tmp = I915_READ(BXT_MIPI_CLOCK_CTL);
tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port));
tmp &= ~(BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port));
tmp &= ~(BXT_MIPI_ESCLK_VAR_DIV_MASK(port));
tmp &= ~(BXT_MIPI_DPHY_DIVIDER_MASK(port));
I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp);
I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
}
void intel_dsi_reset_clocks(struct intel_encoder *encoder, enum port port)
{
struct drm_device *dev = encoder->base.dev;
if (IS_BROXTON(dev))
bxt_dsi_reset_clocks(encoder, port);
else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
vlv_dsi_reset_clocks(encoder, port);
}