| /* QLogic qede NIC Driver |
| * Copyright (c) 2015 QLogic Corporation |
| * |
| * This software is available under the terms of the GNU General Public License |
| * (GPL) Version 2, available from the file COPYING in the main directory of |
| * this source tree. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/version.h> |
| #include <linux/device.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/errno.h> |
| #include <linux/list.h> |
| #include <linux/string.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/interrupt.h> |
| #include <asm/byteorder.h> |
| #include <asm/param.h> |
| #include <linux/io.h> |
| #include <linux/netdev_features.h> |
| #include <linux/udp.h> |
| #include <linux/tcp.h> |
| #include <net/vxlan.h> |
| #include <linux/ip.h> |
| #include <net/ipv6.h> |
| #include <net/tcp.h> |
| #include <linux/if_ether.h> |
| #include <linux/if_vlan.h> |
| #include <linux/pkt_sched.h> |
| #include <linux/ethtool.h> |
| #include <linux/in.h> |
| #include <linux/random.h> |
| #include <net/ip6_checksum.h> |
| #include <linux/bitops.h> |
| |
| #include "qede.h" |
| |
| static const char version[] = "QLogic QL4xxx 40G/100G Ethernet Driver qede " |
| DRV_MODULE_VERSION "\n"; |
| |
| MODULE_DESCRIPTION("QLogic 40G/100G Ethernet Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_MODULE_VERSION); |
| |
| static uint debug; |
| module_param(debug, uint, 0); |
| MODULE_PARM_DESC(debug, " Default debug msglevel"); |
| |
| static const struct qed_eth_ops *qed_ops; |
| |
| #define CHIP_NUM_57980S_40 0x1634 |
| #define CHIP_NUM_57980S_10 0x1635 |
| #define CHIP_NUM_57980S_MF 0x1636 |
| #define CHIP_NUM_57980S_100 0x1644 |
| #define CHIP_NUM_57980S_50 0x1654 |
| #define CHIP_NUM_57980S_25 0x1656 |
| |
| #ifndef PCI_DEVICE_ID_NX2_57980E |
| #define PCI_DEVICE_ID_57980S_40 CHIP_NUM_57980S_40 |
| #define PCI_DEVICE_ID_57980S_10 CHIP_NUM_57980S_10 |
| #define PCI_DEVICE_ID_57980S_MF CHIP_NUM_57980S_MF |
| #define PCI_DEVICE_ID_57980S_100 CHIP_NUM_57980S_100 |
| #define PCI_DEVICE_ID_57980S_50 CHIP_NUM_57980S_50 |
| #define PCI_DEVICE_ID_57980S_25 CHIP_NUM_57980S_25 |
| #endif |
| |
| static const struct pci_device_id qede_pci_tbl[] = { |
| { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_40), 0 }, |
| { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_10), 0 }, |
| { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_MF), 0 }, |
| { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_100), 0 }, |
| { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_50), 0 }, |
| { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_25), 0 }, |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, qede_pci_tbl); |
| |
| static int qede_probe(struct pci_dev *pdev, const struct pci_device_id *id); |
| |
| #define TX_TIMEOUT (5 * HZ) |
| |
| static void qede_remove(struct pci_dev *pdev); |
| static int qede_alloc_rx_buffer(struct qede_dev *edev, |
| struct qede_rx_queue *rxq); |
| static void qede_link_update(void *dev, struct qed_link_output *link); |
| |
| static struct pci_driver qede_pci_driver = { |
| .name = "qede", |
| .id_table = qede_pci_tbl, |
| .probe = qede_probe, |
| .remove = qede_remove, |
| }; |
| |
| static struct qed_eth_cb_ops qede_ll_ops = { |
| { |
| .link_update = qede_link_update, |
| }, |
| }; |
| |
| static int qede_netdev_event(struct notifier_block *this, unsigned long event, |
| void *ptr) |
| { |
| struct net_device *ndev = netdev_notifier_info_to_dev(ptr); |
| struct ethtool_drvinfo drvinfo; |
| struct qede_dev *edev; |
| |
| /* Currently only support name change */ |
| if (event != NETDEV_CHANGENAME) |
| goto done; |
| |
| /* Check whether this is a qede device */ |
| if (!ndev || !ndev->ethtool_ops || !ndev->ethtool_ops->get_drvinfo) |
| goto done; |
| |
| memset(&drvinfo, 0, sizeof(drvinfo)); |
| ndev->ethtool_ops->get_drvinfo(ndev, &drvinfo); |
| if (strcmp(drvinfo.driver, "qede")) |
| goto done; |
| edev = netdev_priv(ndev); |
| |
| /* Notify qed of the name change */ |
| if (!edev->ops || !edev->ops->common) |
| goto done; |
| edev->ops->common->set_id(edev->cdev, edev->ndev->name, |
| "qede"); |
| |
| done: |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block qede_netdev_notifier = { |
| .notifier_call = qede_netdev_event, |
| }; |
| |
| static |
| int __init qede_init(void) |
| { |
| int ret; |
| u32 qed_ver; |
| |
| pr_notice("qede_init: %s\n", version); |
| |
| qed_ver = qed_get_protocol_version(QED_PROTOCOL_ETH); |
| if (qed_ver != QEDE_ETH_INTERFACE_VERSION) { |
| pr_notice("Version mismatch [%08x != %08x]\n", |
| qed_ver, |
| QEDE_ETH_INTERFACE_VERSION); |
| return -EINVAL; |
| } |
| |
| qed_ops = qed_get_eth_ops(QEDE_ETH_INTERFACE_VERSION); |
| if (!qed_ops) { |
| pr_notice("Failed to get qed ethtool operations\n"); |
| return -EINVAL; |
| } |
| |
| /* Must register notifier before pci ops, since we might miss |
| * interface rename after pci probe and netdev registeration. |
| */ |
| ret = register_netdevice_notifier(&qede_netdev_notifier); |
| if (ret) { |
| pr_notice("Failed to register netdevice_notifier\n"); |
| qed_put_eth_ops(); |
| return -EINVAL; |
| } |
| |
| ret = pci_register_driver(&qede_pci_driver); |
| if (ret) { |
| pr_notice("Failed to register driver\n"); |
| unregister_netdevice_notifier(&qede_netdev_notifier); |
| qed_put_eth_ops(); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit qede_cleanup(void) |
| { |
| pr_notice("qede_cleanup called\n"); |
| |
| unregister_netdevice_notifier(&qede_netdev_notifier); |
| pci_unregister_driver(&qede_pci_driver); |
| qed_put_eth_ops(); |
| } |
| |
| module_init(qede_init); |
| module_exit(qede_cleanup); |
| |
| /* ------------------------------------------------------------------------- |
| * START OF FAST-PATH |
| * ------------------------------------------------------------------------- |
| */ |
| |
| /* Unmap the data and free skb */ |
| static int qede_free_tx_pkt(struct qede_dev *edev, |
| struct qede_tx_queue *txq, |
| int *len) |
| { |
| u16 idx = txq->sw_tx_cons & NUM_TX_BDS_MAX; |
| struct sk_buff *skb = txq->sw_tx_ring[idx].skb; |
| struct eth_tx_1st_bd *first_bd; |
| struct eth_tx_bd *tx_data_bd; |
| int bds_consumed = 0; |
| int nbds; |
| bool data_split = txq->sw_tx_ring[idx].flags & QEDE_TSO_SPLIT_BD; |
| int i, split_bd_len = 0; |
| |
| if (unlikely(!skb)) { |
| DP_ERR(edev, |
| "skb is null for txq idx=%d txq->sw_tx_cons=%d txq->sw_tx_prod=%d\n", |
| idx, txq->sw_tx_cons, txq->sw_tx_prod); |
| return -1; |
| } |
| |
| *len = skb->len; |
| |
| first_bd = (struct eth_tx_1st_bd *)qed_chain_consume(&txq->tx_pbl); |
| |
| bds_consumed++; |
| |
| nbds = first_bd->data.nbds; |
| |
| if (data_split) { |
| struct eth_tx_bd *split = (struct eth_tx_bd *) |
| qed_chain_consume(&txq->tx_pbl); |
| split_bd_len = BD_UNMAP_LEN(split); |
| bds_consumed++; |
| } |
| dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(first_bd), |
| BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE); |
| |
| /* Unmap the data of the skb frags */ |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++, bds_consumed++) { |
| tx_data_bd = (struct eth_tx_bd *) |
| qed_chain_consume(&txq->tx_pbl); |
| dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(tx_data_bd), |
| BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE); |
| } |
| |
| while (bds_consumed++ < nbds) |
| qed_chain_consume(&txq->tx_pbl); |
| |
| /* Free skb */ |
| dev_kfree_skb_any(skb); |
| txq->sw_tx_ring[idx].skb = NULL; |
| txq->sw_tx_ring[idx].flags = 0; |
| |
| return 0; |
| } |
| |
| /* Unmap the data and free skb when mapping failed during start_xmit */ |
| static void qede_free_failed_tx_pkt(struct qede_dev *edev, |
| struct qede_tx_queue *txq, |
| struct eth_tx_1st_bd *first_bd, |
| int nbd, |
| bool data_split) |
| { |
| u16 idx = txq->sw_tx_prod & NUM_TX_BDS_MAX; |
| struct sk_buff *skb = txq->sw_tx_ring[idx].skb; |
| struct eth_tx_bd *tx_data_bd; |
| int i, split_bd_len = 0; |
| |
| /* Return prod to its position before this skb was handled */ |
| qed_chain_set_prod(&txq->tx_pbl, |
| le16_to_cpu(txq->tx_db.data.bd_prod), |
| first_bd); |
| |
| first_bd = (struct eth_tx_1st_bd *)qed_chain_produce(&txq->tx_pbl); |
| |
| if (data_split) { |
| struct eth_tx_bd *split = (struct eth_tx_bd *) |
| qed_chain_produce(&txq->tx_pbl); |
| split_bd_len = BD_UNMAP_LEN(split); |
| nbd--; |
| } |
| |
| dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(first_bd), |
| BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE); |
| |
| /* Unmap the data of the skb frags */ |
| for (i = 0; i < nbd; i++) { |
| tx_data_bd = (struct eth_tx_bd *) |
| qed_chain_produce(&txq->tx_pbl); |
| if (tx_data_bd->nbytes) |
| dma_unmap_page(&edev->pdev->dev, |
| BD_UNMAP_ADDR(tx_data_bd), |
| BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE); |
| } |
| |
| /* Return again prod to its position before this skb was handled */ |
| qed_chain_set_prod(&txq->tx_pbl, |
| le16_to_cpu(txq->tx_db.data.bd_prod), |
| first_bd); |
| |
| /* Free skb */ |
| dev_kfree_skb_any(skb); |
| txq->sw_tx_ring[idx].skb = NULL; |
| txq->sw_tx_ring[idx].flags = 0; |
| } |
| |
| static u32 qede_xmit_type(struct qede_dev *edev, |
| struct sk_buff *skb, |
| int *ipv6_ext) |
| { |
| u32 rc = XMIT_L4_CSUM; |
| __be16 l3_proto; |
| |
| if (skb->ip_summed != CHECKSUM_PARTIAL) |
| return XMIT_PLAIN; |
| |
| l3_proto = vlan_get_protocol(skb); |
| if (l3_proto == htons(ETH_P_IPV6) && |
| (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6)) |
| *ipv6_ext = 1; |
| |
| if (skb_is_gso(skb)) |
| rc |= XMIT_LSO; |
| |
| return rc; |
| } |
| |
| static void qede_set_params_for_ipv6_ext(struct sk_buff *skb, |
| struct eth_tx_2nd_bd *second_bd, |
| struct eth_tx_3rd_bd *third_bd) |
| { |
| u8 l4_proto; |
| u16 bd2_bits = 0, bd2_bits2 = 0; |
| |
| bd2_bits2 |= (1 << ETH_TX_DATA_2ND_BD_IPV6_EXT_SHIFT); |
| |
| bd2_bits |= ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) & |
| ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_MASK) |
| << ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_SHIFT; |
| |
| bd2_bits2 |= (ETH_L4_PSEUDO_CSUM_CORRECT_LENGTH << |
| ETH_TX_DATA_2ND_BD_L4_PSEUDO_CSUM_MODE_SHIFT); |
| |
| if (vlan_get_protocol(skb) == htons(ETH_P_IPV6)) |
| l4_proto = ipv6_hdr(skb)->nexthdr; |
| else |
| l4_proto = ip_hdr(skb)->protocol; |
| |
| if (l4_proto == IPPROTO_UDP) |
| bd2_bits2 |= 1 << ETH_TX_DATA_2ND_BD_L4_UDP_SHIFT; |
| |
| if (third_bd) { |
| third_bd->data.bitfields |= |
| ((tcp_hdrlen(skb) / 4) & |
| ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_MASK) << |
| ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_SHIFT; |
| } |
| |
| second_bd->data.bitfields = cpu_to_le16(bd2_bits); |
| second_bd->data.bitfields2 = cpu_to_le16(bd2_bits2); |
| } |
| |
| static int map_frag_to_bd(struct qede_dev *edev, |
| skb_frag_t *frag, |
| struct eth_tx_bd *bd) |
| { |
| dma_addr_t mapping; |
| |
| /* Map skb non-linear frag data for DMA */ |
| mapping = skb_frag_dma_map(&edev->pdev->dev, frag, 0, |
| skb_frag_size(frag), |
| DMA_TO_DEVICE); |
| if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) { |
| DP_NOTICE(edev, "Unable to map frag - dropping packet\n"); |
| return -ENOMEM; |
| } |
| |
| /* Setup the data pointer of the frag data */ |
| BD_SET_UNMAP_ADDR_LEN(bd, mapping, skb_frag_size(frag)); |
| |
| return 0; |
| } |
| |
| /* Main transmit function */ |
| static |
| netdev_tx_t qede_start_xmit(struct sk_buff *skb, |
| struct net_device *ndev) |
| { |
| struct qede_dev *edev = netdev_priv(ndev); |
| struct netdev_queue *netdev_txq; |
| struct qede_tx_queue *txq; |
| struct eth_tx_1st_bd *first_bd; |
| struct eth_tx_2nd_bd *second_bd = NULL; |
| struct eth_tx_3rd_bd *third_bd = NULL; |
| struct eth_tx_bd *tx_data_bd = NULL; |
| u16 txq_index; |
| u8 nbd = 0; |
| dma_addr_t mapping; |
| int rc, frag_idx = 0, ipv6_ext = 0; |
| u8 xmit_type; |
| u16 idx; |
| u16 hlen; |
| bool data_split; |
| |
| /* Get tx-queue context and netdev index */ |
| txq_index = skb_get_queue_mapping(skb); |
| WARN_ON(txq_index >= QEDE_TSS_CNT(edev)); |
| txq = QEDE_TX_QUEUE(edev, txq_index); |
| netdev_txq = netdev_get_tx_queue(ndev, txq_index); |
| |
| /* Current code doesn't support SKB linearization, since the max number |
| * of skb frags can be passed in the FW HSI. |
| */ |
| BUILD_BUG_ON(MAX_SKB_FRAGS > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET); |
| |
| WARN_ON(qed_chain_get_elem_left(&txq->tx_pbl) < |
| (MAX_SKB_FRAGS + 1)); |
| |
| xmit_type = qede_xmit_type(edev, skb, &ipv6_ext); |
| |
| /* Fill the entry in the SW ring and the BDs in the FW ring */ |
| idx = txq->sw_tx_prod & NUM_TX_BDS_MAX; |
| txq->sw_tx_ring[idx].skb = skb; |
| first_bd = (struct eth_tx_1st_bd *) |
| qed_chain_produce(&txq->tx_pbl); |
| memset(first_bd, 0, sizeof(*first_bd)); |
| first_bd->data.bd_flags.bitfields = |
| 1 << ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT; |
| |
| /* Map skb linear data for DMA and set in the first BD */ |
| mapping = dma_map_single(&edev->pdev->dev, skb->data, |
| skb_headlen(skb), DMA_TO_DEVICE); |
| if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) { |
| DP_NOTICE(edev, "SKB mapping failed\n"); |
| qede_free_failed_tx_pkt(edev, txq, first_bd, 0, false); |
| return NETDEV_TX_OK; |
| } |
| nbd++; |
| BD_SET_UNMAP_ADDR_LEN(first_bd, mapping, skb_headlen(skb)); |
| |
| /* In case there is IPv6 with extension headers or LSO we need 2nd and |
| * 3rd BDs. |
| */ |
| if (unlikely((xmit_type & XMIT_LSO) | ipv6_ext)) { |
| second_bd = (struct eth_tx_2nd_bd *) |
| qed_chain_produce(&txq->tx_pbl); |
| memset(second_bd, 0, sizeof(*second_bd)); |
| |
| nbd++; |
| third_bd = (struct eth_tx_3rd_bd *) |
| qed_chain_produce(&txq->tx_pbl); |
| memset(third_bd, 0, sizeof(*third_bd)); |
| |
| nbd++; |
| /* We need to fill in additional data in second_bd... */ |
| tx_data_bd = (struct eth_tx_bd *)second_bd; |
| } |
| |
| if (skb_vlan_tag_present(skb)) { |
| first_bd->data.vlan = cpu_to_le16(skb_vlan_tag_get(skb)); |
| first_bd->data.bd_flags.bitfields |= |
| 1 << ETH_TX_1ST_BD_FLAGS_VLAN_INSERTION_SHIFT; |
| } |
| |
| /* Fill the parsing flags & params according to the requested offload */ |
| if (xmit_type & XMIT_L4_CSUM) { |
| /* We don't re-calculate IP checksum as it is already done by |
| * the upper stack |
| */ |
| first_bd->data.bd_flags.bitfields |= |
| 1 << ETH_TX_1ST_BD_FLAGS_L4_CSUM_SHIFT; |
| |
| /* If the packet is IPv6 with extension header, indicate that |
| * to FW and pass few params, since the device cracker doesn't |
| * support parsing IPv6 with extension header/s. |
| */ |
| if (unlikely(ipv6_ext)) |
| qede_set_params_for_ipv6_ext(skb, second_bd, third_bd); |
| } |
| |
| if (xmit_type & XMIT_LSO) { |
| first_bd->data.bd_flags.bitfields |= |
| (1 << ETH_TX_1ST_BD_FLAGS_LSO_SHIFT); |
| third_bd->data.lso_mss = |
| cpu_to_le16(skb_shinfo(skb)->gso_size); |
| |
| first_bd->data.bd_flags.bitfields |= |
| 1 << ETH_TX_1ST_BD_FLAGS_IP_CSUM_SHIFT; |
| hlen = skb_transport_header(skb) + |
| tcp_hdrlen(skb) - skb->data; |
| |
| /* @@@TBD - if will not be removed need to check */ |
| third_bd->data.bitfields |= |
| (1 << ETH_TX_DATA_3RD_BD_HDR_NBD_SHIFT); |
| |
| /* Make life easier for FW guys who can't deal with header and |
| * data on same BD. If we need to split, use the second bd... |
| */ |
| if (unlikely(skb_headlen(skb) > hlen)) { |
| DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED, |
| "TSO split header size is %d (%x:%x)\n", |
| first_bd->nbytes, first_bd->addr.hi, |
| first_bd->addr.lo); |
| |
| mapping = HILO_U64(le32_to_cpu(first_bd->addr.hi), |
| le32_to_cpu(first_bd->addr.lo)) + |
| hlen; |
| |
| BD_SET_UNMAP_ADDR_LEN(tx_data_bd, mapping, |
| le16_to_cpu(first_bd->nbytes) - |
| hlen); |
| |
| /* this marks the BD as one that has no |
| * individual mapping |
| */ |
| txq->sw_tx_ring[idx].flags |= QEDE_TSO_SPLIT_BD; |
| |
| first_bd->nbytes = cpu_to_le16(hlen); |
| |
| tx_data_bd = (struct eth_tx_bd *)third_bd; |
| data_split = true; |
| } |
| } |
| |
| /* Handle fragmented skb */ |
| /* special handle for frags inside 2nd and 3rd bds.. */ |
| while (tx_data_bd && frag_idx < skb_shinfo(skb)->nr_frags) { |
| rc = map_frag_to_bd(edev, |
| &skb_shinfo(skb)->frags[frag_idx], |
| tx_data_bd); |
| if (rc) { |
| qede_free_failed_tx_pkt(edev, txq, first_bd, nbd, |
| data_split); |
| return NETDEV_TX_OK; |
| } |
| |
| if (tx_data_bd == (struct eth_tx_bd *)second_bd) |
| tx_data_bd = (struct eth_tx_bd *)third_bd; |
| else |
| tx_data_bd = NULL; |
| |
| frag_idx++; |
| } |
| |
| /* map last frags into 4th, 5th .... */ |
| for (; frag_idx < skb_shinfo(skb)->nr_frags; frag_idx++, nbd++) { |
| tx_data_bd = (struct eth_tx_bd *) |
| qed_chain_produce(&txq->tx_pbl); |
| |
| memset(tx_data_bd, 0, sizeof(*tx_data_bd)); |
| |
| rc = map_frag_to_bd(edev, |
| &skb_shinfo(skb)->frags[frag_idx], |
| tx_data_bd); |
| if (rc) { |
| qede_free_failed_tx_pkt(edev, txq, first_bd, nbd, |
| data_split); |
| return NETDEV_TX_OK; |
| } |
| } |
| |
| /* update the first BD with the actual num BDs */ |
| first_bd->data.nbds = nbd; |
| |
| netdev_tx_sent_queue(netdev_txq, skb->len); |
| |
| skb_tx_timestamp(skb); |
| |
| /* Advance packet producer only before sending the packet since mapping |
| * of pages may fail. |
| */ |
| txq->sw_tx_prod++; |
| |
| /* 'next page' entries are counted in the producer value */ |
| txq->tx_db.data.bd_prod = |
| cpu_to_le16(qed_chain_get_prod_idx(&txq->tx_pbl)); |
| |
| /* wmb makes sure that the BDs data is updated before updating the |
| * producer, otherwise FW may read old data from the BDs. |
| */ |
| wmb(); |
| barrier(); |
| writel(txq->tx_db.raw, txq->doorbell_addr); |
| |
| /* mmiowb is needed to synchronize doorbell writes from more than one |
| * processor. It guarantees that the write arrives to the device before |
| * the queue lock is released and another start_xmit is called (possibly |
| * on another CPU). Without this barrier, the next doorbell can bypass |
| * this doorbell. This is applicable to IA64/Altix systems. |
| */ |
| mmiowb(); |
| |
| if (unlikely(qed_chain_get_elem_left(&txq->tx_pbl) |
| < (MAX_SKB_FRAGS + 1))) { |
| netif_tx_stop_queue(netdev_txq); |
| DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED, |
| "Stop queue was called\n"); |
| /* paired memory barrier is in qede_tx_int(), we have to keep |
| * ordering of set_bit() in netif_tx_stop_queue() and read of |
| * fp->bd_tx_cons |
| */ |
| smp_mb(); |
| |
| if (qed_chain_get_elem_left(&txq->tx_pbl) |
| >= (MAX_SKB_FRAGS + 1) && |
| (edev->state == QEDE_STATE_OPEN)) { |
| netif_tx_wake_queue(netdev_txq); |
| DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED, |
| "Wake queue was called\n"); |
| } |
| } |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static int qede_txq_has_work(struct qede_tx_queue *txq) |
| { |
| u16 hw_bd_cons; |
| |
| /* Tell compiler that consumer and producer can change */ |
| barrier(); |
| hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr); |
| if (qed_chain_get_cons_idx(&txq->tx_pbl) == hw_bd_cons + 1) |
| return 0; |
| |
| return hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl); |
| } |
| |
| static int qede_tx_int(struct qede_dev *edev, |
| struct qede_tx_queue *txq) |
| { |
| struct netdev_queue *netdev_txq; |
| u16 hw_bd_cons; |
| unsigned int pkts_compl = 0, bytes_compl = 0; |
| int rc; |
| |
| netdev_txq = netdev_get_tx_queue(edev->ndev, txq->index); |
| |
| hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr); |
| barrier(); |
| |
| while (hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl)) { |
| int len = 0; |
| |
| rc = qede_free_tx_pkt(edev, txq, &len); |
| if (rc) { |
| DP_NOTICE(edev, "hw_bd_cons = %d, chain_cons=%d\n", |
| hw_bd_cons, |
| qed_chain_get_cons_idx(&txq->tx_pbl)); |
| break; |
| } |
| |
| bytes_compl += len; |
| pkts_compl++; |
| txq->sw_tx_cons++; |
| } |
| |
| netdev_tx_completed_queue(netdev_txq, pkts_compl, bytes_compl); |
| |
| /* Need to make the tx_bd_cons update visible to start_xmit() |
| * before checking for netif_tx_queue_stopped(). Without the |
| * memory barrier, there is a small possibility that |
| * start_xmit() will miss it and cause the queue to be stopped |
| * forever. |
| * On the other hand we need an rmb() here to ensure the proper |
| * ordering of bit testing in the following |
| * netif_tx_queue_stopped(txq) call. |
| */ |
| smp_mb(); |
| |
| if (unlikely(netif_tx_queue_stopped(netdev_txq))) { |
| /* Taking tx_lock is needed to prevent reenabling the queue |
| * while it's empty. This could have happen if rx_action() gets |
| * suspended in qede_tx_int() after the condition before |
| * netif_tx_wake_queue(), while tx_action (qede_start_xmit()): |
| * |
| * stops the queue->sees fresh tx_bd_cons->releases the queue-> |
| * sends some packets consuming the whole queue again-> |
| * stops the queue |
| */ |
| |
| __netif_tx_lock(netdev_txq, smp_processor_id()); |
| |
| if ((netif_tx_queue_stopped(netdev_txq)) && |
| (edev->state == QEDE_STATE_OPEN) && |
| (qed_chain_get_elem_left(&txq->tx_pbl) |
| >= (MAX_SKB_FRAGS + 1))) { |
| netif_tx_wake_queue(netdev_txq); |
| DP_VERBOSE(edev, NETIF_MSG_TX_DONE, |
| "Wake queue was called\n"); |
| } |
| |
| __netif_tx_unlock(netdev_txq); |
| } |
| |
| return 0; |
| } |
| |
| static bool qede_has_rx_work(struct qede_rx_queue *rxq) |
| { |
| u16 hw_comp_cons, sw_comp_cons; |
| |
| /* Tell compiler that status block fields can change */ |
| barrier(); |
| |
| hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr); |
| sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring); |
| |
| return hw_comp_cons != sw_comp_cons; |
| } |
| |
| static bool qede_has_tx_work(struct qede_fastpath *fp) |
| { |
| u8 tc; |
| |
| for (tc = 0; tc < fp->edev->num_tc; tc++) |
| if (qede_txq_has_work(&fp->txqs[tc])) |
| return true; |
| return false; |
| } |
| |
| /* This function copies the Rx buffer from the CONS position to the PROD |
| * position, since we failed to allocate a new Rx buffer. |
| */ |
| static void qede_reuse_rx_data(struct qede_rx_queue *rxq) |
| { |
| struct eth_rx_bd *rx_bd_cons = qed_chain_consume(&rxq->rx_bd_ring); |
| struct eth_rx_bd *rx_bd_prod = qed_chain_produce(&rxq->rx_bd_ring); |
| struct sw_rx_data *sw_rx_data_cons = |
| &rxq->sw_rx_ring[rxq->sw_rx_cons & NUM_RX_BDS_MAX]; |
| struct sw_rx_data *sw_rx_data_prod = |
| &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX]; |
| |
| dma_unmap_addr_set(sw_rx_data_prod, mapping, |
| dma_unmap_addr(sw_rx_data_cons, mapping)); |
| |
| sw_rx_data_prod->data = sw_rx_data_cons->data; |
| memcpy(rx_bd_prod, rx_bd_cons, sizeof(struct eth_rx_bd)); |
| |
| rxq->sw_rx_cons++; |
| rxq->sw_rx_prod++; |
| } |
| |
| static inline void qede_update_rx_prod(struct qede_dev *edev, |
| struct qede_rx_queue *rxq) |
| { |
| u16 bd_prod = qed_chain_get_prod_idx(&rxq->rx_bd_ring); |
| u16 cqe_prod = qed_chain_get_prod_idx(&rxq->rx_comp_ring); |
| struct eth_rx_prod_data rx_prods = {0}; |
| |
| /* Update producers */ |
| rx_prods.bd_prod = cpu_to_le16(bd_prod); |
| rx_prods.cqe_prod = cpu_to_le16(cqe_prod); |
| |
| /* Make sure that the BD and SGE data is updated before updating the |
| * producers since FW might read the BD/SGE right after the producer |
| * is updated. |
| */ |
| wmb(); |
| |
| internal_ram_wr(rxq->hw_rxq_prod_addr, sizeof(rx_prods), |
| (u32 *)&rx_prods); |
| |
| /* mmiowb is needed to synchronize doorbell writes from more than one |
| * processor. It guarantees that the write arrives to the device before |
| * the napi lock is released and another qede_poll is called (possibly |
| * on another CPU). Without this barrier, the next doorbell can bypass |
| * this doorbell. This is applicable to IA64/Altix systems. |
| */ |
| mmiowb(); |
| } |
| |
| static u32 qede_get_rxhash(struct qede_dev *edev, |
| u8 bitfields, |
| __le32 rss_hash, |
| enum pkt_hash_types *rxhash_type) |
| { |
| enum rss_hash_type htype; |
| |
| htype = GET_FIELD(bitfields, ETH_FAST_PATH_RX_REG_CQE_RSS_HASH_TYPE); |
| |
| if ((edev->ndev->features & NETIF_F_RXHASH) && htype) { |
| *rxhash_type = ((htype == RSS_HASH_TYPE_IPV4) || |
| (htype == RSS_HASH_TYPE_IPV6)) ? |
| PKT_HASH_TYPE_L3 : PKT_HASH_TYPE_L4; |
| return le32_to_cpu(rss_hash); |
| } |
| *rxhash_type = PKT_HASH_TYPE_NONE; |
| return 0; |
| } |
| |
| static void qede_set_skb_csum(struct sk_buff *skb, u8 csum_flag) |
| { |
| skb_checksum_none_assert(skb); |
| |
| if (csum_flag & QEDE_CSUM_UNNECESSARY) |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| } |
| |
| static inline void qede_skb_receive(struct qede_dev *edev, |
| struct qede_fastpath *fp, |
| struct sk_buff *skb, |
| u16 vlan_tag) |
| { |
| if (vlan_tag) |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), |
| vlan_tag); |
| |
| napi_gro_receive(&fp->napi, skb); |
| } |
| |
| static u8 qede_check_csum(u16 flag) |
| { |
| u16 csum_flag = 0; |
| u8 csum = 0; |
| |
| if ((PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_MASK << |
| PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_SHIFT) & flag) { |
| csum_flag |= PARSING_AND_ERR_FLAGS_L4CHKSMERROR_MASK << |
| PARSING_AND_ERR_FLAGS_L4CHKSMERROR_SHIFT; |
| csum = QEDE_CSUM_UNNECESSARY; |
| } |
| |
| csum_flag |= PARSING_AND_ERR_FLAGS_IPHDRERROR_MASK << |
| PARSING_AND_ERR_FLAGS_IPHDRERROR_SHIFT; |
| |
| if (csum_flag & flag) |
| return QEDE_CSUM_ERROR; |
| |
| return csum; |
| } |
| |
| static int qede_rx_int(struct qede_fastpath *fp, int budget) |
| { |
| struct qede_dev *edev = fp->edev; |
| struct qede_rx_queue *rxq = fp->rxq; |
| |
| u16 hw_comp_cons, sw_comp_cons, sw_rx_index, parse_flag; |
| int rx_pkt = 0; |
| u8 csum_flag; |
| |
| hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr); |
| sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring); |
| |
| /* Memory barrier to prevent the CPU from doing speculative reads of CQE |
| * / BD in the while-loop before reading hw_comp_cons. If the CQE is |
| * read before it is written by FW, then FW writes CQE and SB, and then |
| * the CPU reads the hw_comp_cons, it will use an old CQE. |
| */ |
| rmb(); |
| |
| /* Loop to complete all indicated BDs */ |
| while (sw_comp_cons != hw_comp_cons) { |
| struct eth_fast_path_rx_reg_cqe *fp_cqe; |
| enum pkt_hash_types rxhash_type; |
| enum eth_rx_cqe_type cqe_type; |
| struct sw_rx_data *sw_rx_data; |
| union eth_rx_cqe *cqe; |
| struct sk_buff *skb; |
| u16 len, pad; |
| u32 rx_hash; |
| u8 *data; |
| |
| /* Get the CQE from the completion ring */ |
| cqe = (union eth_rx_cqe *) |
| qed_chain_consume(&rxq->rx_comp_ring); |
| cqe_type = cqe->fast_path_regular.type; |
| |
| if (unlikely(cqe_type == ETH_RX_CQE_TYPE_SLOW_PATH)) { |
| edev->ops->eth_cqe_completion( |
| edev->cdev, fp->rss_id, |
| (struct eth_slow_path_rx_cqe *)cqe); |
| goto next_cqe; |
| } |
| |
| /* Get the data from the SW ring */ |
| sw_rx_index = rxq->sw_rx_cons & NUM_RX_BDS_MAX; |
| sw_rx_data = &rxq->sw_rx_ring[sw_rx_index]; |
| data = sw_rx_data->data; |
| |
| fp_cqe = &cqe->fast_path_regular; |
| len = le16_to_cpu(fp_cqe->pkt_len); |
| pad = fp_cqe->placement_offset; |
| |
| /* For every Rx BD consumed, we allocate a new BD so the BD ring |
| * is always with a fixed size. If allocation fails, we take the |
| * consumed BD and return it to the ring in the PROD position. |
| * The packet that was received on that BD will be dropped (and |
| * not passed to the upper stack). |
| */ |
| if (likely(qede_alloc_rx_buffer(edev, rxq) == 0)) { |
| dma_unmap_single(&edev->pdev->dev, |
| dma_unmap_addr(sw_rx_data, mapping), |
| rxq->rx_buf_size, DMA_FROM_DEVICE); |
| |
| /* If this is an error packet then drop it */ |
| parse_flag = |
| le16_to_cpu(cqe->fast_path_regular.pars_flags.flags); |
| csum_flag = qede_check_csum(parse_flag); |
| if (csum_flag == QEDE_CSUM_ERROR) { |
| DP_NOTICE(edev, |
| "CQE in CONS = %u has error, flags = %x, dropping incoming packet\n", |
| sw_comp_cons, parse_flag); |
| rxq->rx_hw_errors++; |
| kfree(data); |
| goto next_rx; |
| } |
| |
| skb = build_skb(data, 0); |
| |
| if (unlikely(!skb)) { |
| DP_NOTICE(edev, |
| "Build_skb failed, dropping incoming packet\n"); |
| kfree(data); |
| rxq->rx_alloc_errors++; |
| goto next_rx; |
| } |
| |
| skb_reserve(skb, pad); |
| |
| } else { |
| DP_NOTICE(edev, |
| "New buffer allocation failed, dropping incoming packet and reusing its buffer\n"); |
| qede_reuse_rx_data(rxq); |
| rxq->rx_alloc_errors++; |
| goto next_cqe; |
| } |
| |
| sw_rx_data->data = NULL; |
| |
| skb_put(skb, len); |
| |
| skb->protocol = eth_type_trans(skb, edev->ndev); |
| |
| rx_hash = qede_get_rxhash(edev, fp_cqe->bitfields, |
| fp_cqe->rss_hash, |
| &rxhash_type); |
| |
| skb_set_hash(skb, rx_hash, rxhash_type); |
| |
| qede_set_skb_csum(skb, csum_flag); |
| |
| skb_record_rx_queue(skb, fp->rss_id); |
| |
| qede_skb_receive(edev, fp, skb, le16_to_cpu(fp_cqe->vlan_tag)); |
| |
| qed_chain_consume(&rxq->rx_bd_ring); |
| |
| next_rx: |
| rxq->sw_rx_cons++; |
| rx_pkt++; |
| |
| next_cqe: /* don't consume bd rx buffer */ |
| qed_chain_recycle_consumed(&rxq->rx_comp_ring); |
| sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring); |
| /* CR TPA - revisit how to handle budget in TPA perhaps |
| * increase on "end" |
| */ |
| if (rx_pkt == budget) |
| break; |
| } /* repeat while sw_comp_cons != hw_comp_cons... */ |
| |
| /* Update producers */ |
| qede_update_rx_prod(edev, rxq); |
| |
| return rx_pkt; |
| } |
| |
| static int qede_poll(struct napi_struct *napi, int budget) |
| { |
| int work_done = 0; |
| struct qede_fastpath *fp = container_of(napi, struct qede_fastpath, |
| napi); |
| struct qede_dev *edev = fp->edev; |
| |
| while (1) { |
| u8 tc; |
| |
| for (tc = 0; tc < edev->num_tc; tc++) |
| if (qede_txq_has_work(&fp->txqs[tc])) |
| qede_tx_int(edev, &fp->txqs[tc]); |
| |
| if (qede_has_rx_work(fp->rxq)) { |
| work_done += qede_rx_int(fp, budget - work_done); |
| |
| /* must not complete if we consumed full budget */ |
| if (work_done >= budget) |
| break; |
| } |
| |
| /* Fall out from the NAPI loop if needed */ |
| if (!(qede_has_rx_work(fp->rxq) || qede_has_tx_work(fp))) { |
| qed_sb_update_sb_idx(fp->sb_info); |
| /* *_has_*_work() reads the status block, |
| * thus we need to ensure that status block indices |
| * have been actually read (qed_sb_update_sb_idx) |
| * prior to this check (*_has_*_work) so that |
| * we won't write the "newer" value of the status block |
| * to HW (if there was a DMA right after |
| * qede_has_rx_work and if there is no rmb, the memory |
| * reading (qed_sb_update_sb_idx) may be postponed |
| * to right before *_ack_sb). In this case there |
| * will never be another interrupt until there is |
| * another update of the status block, while there |
| * is still unhandled work. |
| */ |
| rmb(); |
| |
| if (!(qede_has_rx_work(fp->rxq) || |
| qede_has_tx_work(fp))) { |
| napi_complete(napi); |
| /* Update and reenable interrupts */ |
| qed_sb_ack(fp->sb_info, IGU_INT_ENABLE, |
| 1 /*update*/); |
| break; |
| } |
| } |
| } |
| |
| return work_done; |
| } |
| |
| static irqreturn_t qede_msix_fp_int(int irq, void *fp_cookie) |
| { |
| struct qede_fastpath *fp = fp_cookie; |
| |
| qed_sb_ack(fp->sb_info, IGU_INT_DISABLE, 0 /*do not update*/); |
| |
| napi_schedule_irqoff(&fp->napi); |
| return IRQ_HANDLED; |
| } |
| |
| /* ------------------------------------------------------------------------- |
| * END OF FAST-PATH |
| * ------------------------------------------------------------------------- |
| */ |
| |
| static int qede_open(struct net_device *ndev); |
| static int qede_close(struct net_device *ndev); |
| static int qede_set_mac_addr(struct net_device *ndev, void *p); |
| static void qede_set_rx_mode(struct net_device *ndev); |
| static void qede_config_rx_mode(struct net_device *ndev); |
| |
| static int qede_set_ucast_rx_mac(struct qede_dev *edev, |
| enum qed_filter_xcast_params_type opcode, |
| unsigned char mac[ETH_ALEN]) |
| { |
| struct qed_filter_params filter_cmd; |
| |
| memset(&filter_cmd, 0, sizeof(filter_cmd)); |
| filter_cmd.type = QED_FILTER_TYPE_UCAST; |
| filter_cmd.filter.ucast.type = opcode; |
| filter_cmd.filter.ucast.mac_valid = 1; |
| ether_addr_copy(filter_cmd.filter.ucast.mac, mac); |
| |
| return edev->ops->filter_config(edev->cdev, &filter_cmd); |
| } |
| |
| void qede_fill_by_demand_stats(struct qede_dev *edev) |
| { |
| struct qed_eth_stats stats; |
| |
| edev->ops->get_vport_stats(edev->cdev, &stats); |
| edev->stats.no_buff_discards = stats.no_buff_discards; |
| edev->stats.rx_ucast_bytes = stats.rx_ucast_bytes; |
| edev->stats.rx_mcast_bytes = stats.rx_mcast_bytes; |
| edev->stats.rx_bcast_bytes = stats.rx_bcast_bytes; |
| edev->stats.rx_ucast_pkts = stats.rx_ucast_pkts; |
| edev->stats.rx_mcast_pkts = stats.rx_mcast_pkts; |
| edev->stats.rx_bcast_pkts = stats.rx_bcast_pkts; |
| edev->stats.mftag_filter_discards = stats.mftag_filter_discards; |
| edev->stats.mac_filter_discards = stats.mac_filter_discards; |
| |
| edev->stats.tx_ucast_bytes = stats.tx_ucast_bytes; |
| edev->stats.tx_mcast_bytes = stats.tx_mcast_bytes; |
| edev->stats.tx_bcast_bytes = stats.tx_bcast_bytes; |
| edev->stats.tx_ucast_pkts = stats.tx_ucast_pkts; |
| edev->stats.tx_mcast_pkts = stats.tx_mcast_pkts; |
| edev->stats.tx_bcast_pkts = stats.tx_bcast_pkts; |
| edev->stats.tx_err_drop_pkts = stats.tx_err_drop_pkts; |
| edev->stats.coalesced_pkts = stats.tpa_coalesced_pkts; |
| edev->stats.coalesced_events = stats.tpa_coalesced_events; |
| edev->stats.coalesced_aborts_num = stats.tpa_aborts_num; |
| edev->stats.non_coalesced_pkts = stats.tpa_not_coalesced_pkts; |
| edev->stats.coalesced_bytes = stats.tpa_coalesced_bytes; |
| |
| edev->stats.rx_64_byte_packets = stats.rx_64_byte_packets; |
| edev->stats.rx_127_byte_packets = stats.rx_127_byte_packets; |
| edev->stats.rx_255_byte_packets = stats.rx_255_byte_packets; |
| edev->stats.rx_511_byte_packets = stats.rx_511_byte_packets; |
| edev->stats.rx_1023_byte_packets = stats.rx_1023_byte_packets; |
| edev->stats.rx_1518_byte_packets = stats.rx_1518_byte_packets; |
| edev->stats.rx_1522_byte_packets = stats.rx_1522_byte_packets; |
| edev->stats.rx_2047_byte_packets = stats.rx_2047_byte_packets; |
| edev->stats.rx_4095_byte_packets = stats.rx_4095_byte_packets; |
| edev->stats.rx_9216_byte_packets = stats.rx_9216_byte_packets; |
| edev->stats.rx_16383_byte_packets = stats.rx_16383_byte_packets; |
| edev->stats.rx_crc_errors = stats.rx_crc_errors; |
| edev->stats.rx_mac_crtl_frames = stats.rx_mac_crtl_frames; |
| edev->stats.rx_pause_frames = stats.rx_pause_frames; |
| edev->stats.rx_pfc_frames = stats.rx_pfc_frames; |
| edev->stats.rx_align_errors = stats.rx_align_errors; |
| edev->stats.rx_carrier_errors = stats.rx_carrier_errors; |
| edev->stats.rx_oversize_packets = stats.rx_oversize_packets; |
| edev->stats.rx_jabbers = stats.rx_jabbers; |
| edev->stats.rx_undersize_packets = stats.rx_undersize_packets; |
| edev->stats.rx_fragments = stats.rx_fragments; |
| edev->stats.tx_64_byte_packets = stats.tx_64_byte_packets; |
| edev->stats.tx_65_to_127_byte_packets = stats.tx_65_to_127_byte_packets; |
| edev->stats.tx_128_to_255_byte_packets = |
| stats.tx_128_to_255_byte_packets; |
| edev->stats.tx_256_to_511_byte_packets = |
| stats.tx_256_to_511_byte_packets; |
| edev->stats.tx_512_to_1023_byte_packets = |
| stats.tx_512_to_1023_byte_packets; |
| edev->stats.tx_1024_to_1518_byte_packets = |
| stats.tx_1024_to_1518_byte_packets; |
| edev->stats.tx_1519_to_2047_byte_packets = |
| stats.tx_1519_to_2047_byte_packets; |
| edev->stats.tx_2048_to_4095_byte_packets = |
| stats.tx_2048_to_4095_byte_packets; |
| edev->stats.tx_4096_to_9216_byte_packets = |
| stats.tx_4096_to_9216_byte_packets; |
| edev->stats.tx_9217_to_16383_byte_packets = |
| stats.tx_9217_to_16383_byte_packets; |
| edev->stats.tx_pause_frames = stats.tx_pause_frames; |
| edev->stats.tx_pfc_frames = stats.tx_pfc_frames; |
| edev->stats.tx_lpi_entry_count = stats.tx_lpi_entry_count; |
| edev->stats.tx_total_collisions = stats.tx_total_collisions; |
| edev->stats.brb_truncates = stats.brb_truncates; |
| edev->stats.brb_discards = stats.brb_discards; |
| edev->stats.tx_mac_ctrl_frames = stats.tx_mac_ctrl_frames; |
| } |
| |
| static struct rtnl_link_stats64 *qede_get_stats64( |
| struct net_device *dev, |
| struct rtnl_link_stats64 *stats) |
| { |
| struct qede_dev *edev = netdev_priv(dev); |
| |
| qede_fill_by_demand_stats(edev); |
| |
| stats->rx_packets = edev->stats.rx_ucast_pkts + |
| edev->stats.rx_mcast_pkts + |
| edev->stats.rx_bcast_pkts; |
| stats->tx_packets = edev->stats.tx_ucast_pkts + |
| edev->stats.tx_mcast_pkts + |
| edev->stats.tx_bcast_pkts; |
| |
| stats->rx_bytes = edev->stats.rx_ucast_bytes + |
| edev->stats.rx_mcast_bytes + |
| edev->stats.rx_bcast_bytes; |
| |
| stats->tx_bytes = edev->stats.tx_ucast_bytes + |
| edev->stats.tx_mcast_bytes + |
| edev->stats.tx_bcast_bytes; |
| |
| stats->tx_errors = edev->stats.tx_err_drop_pkts; |
| stats->multicast = edev->stats.rx_mcast_pkts + |
| edev->stats.rx_bcast_pkts; |
| |
| stats->rx_fifo_errors = edev->stats.no_buff_discards; |
| |
| stats->collisions = edev->stats.tx_total_collisions; |
| stats->rx_crc_errors = edev->stats.rx_crc_errors; |
| stats->rx_frame_errors = edev->stats.rx_align_errors; |
| |
| return stats; |
| } |
| |
| static const struct net_device_ops qede_netdev_ops = { |
| .ndo_open = qede_open, |
| .ndo_stop = qede_close, |
| .ndo_start_xmit = qede_start_xmit, |
| .ndo_set_rx_mode = qede_set_rx_mode, |
| .ndo_set_mac_address = qede_set_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_change_mtu = qede_change_mtu, |
| .ndo_get_stats64 = qede_get_stats64, |
| }; |
| |
| /* ------------------------------------------------------------------------- |
| * START OF PROBE / REMOVE |
| * ------------------------------------------------------------------------- |
| */ |
| |
| static struct qede_dev *qede_alloc_etherdev(struct qed_dev *cdev, |
| struct pci_dev *pdev, |
| struct qed_dev_eth_info *info, |
| u32 dp_module, |
| u8 dp_level) |
| { |
| struct net_device *ndev; |
| struct qede_dev *edev; |
| |
| ndev = alloc_etherdev_mqs(sizeof(*edev), |
| info->num_queues, |
| info->num_queues); |
| if (!ndev) { |
| pr_err("etherdev allocation failed\n"); |
| return NULL; |
| } |
| |
| edev = netdev_priv(ndev); |
| edev->ndev = ndev; |
| edev->cdev = cdev; |
| edev->pdev = pdev; |
| edev->dp_module = dp_module; |
| edev->dp_level = dp_level; |
| edev->ops = qed_ops; |
| edev->q_num_rx_buffers = NUM_RX_BDS_DEF; |
| edev->q_num_tx_buffers = NUM_TX_BDS_DEF; |
| |
| DP_INFO(edev, "Allocated netdev with 64 tx queues and 64 rx queues\n"); |
| |
| SET_NETDEV_DEV(ndev, &pdev->dev); |
| |
| memset(&edev->stats, 0, sizeof(edev->stats)); |
| memcpy(&edev->dev_info, info, sizeof(*info)); |
| |
| edev->num_tc = edev->dev_info.num_tc; |
| |
| return edev; |
| } |
| |
| static void qede_init_ndev(struct qede_dev *edev) |
| { |
| struct net_device *ndev = edev->ndev; |
| struct pci_dev *pdev = edev->pdev; |
| u32 hw_features; |
| |
| pci_set_drvdata(pdev, ndev); |
| |
| ndev->mem_start = edev->dev_info.common.pci_mem_start; |
| ndev->base_addr = ndev->mem_start; |
| ndev->mem_end = edev->dev_info.common.pci_mem_end; |
| ndev->irq = edev->dev_info.common.pci_irq; |
| |
| ndev->watchdog_timeo = TX_TIMEOUT; |
| |
| ndev->netdev_ops = &qede_netdev_ops; |
| |
| qede_set_ethtool_ops(ndev); |
| |
| /* user-changeble features */ |
| hw_features = NETIF_F_GRO | NETIF_F_SG | |
| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | |
| NETIF_F_TSO | NETIF_F_TSO6; |
| |
| ndev->vlan_features = hw_features | NETIF_F_RXHASH | NETIF_F_RXCSUM | |
| NETIF_F_HIGHDMA; |
| ndev->features = hw_features | NETIF_F_RXHASH | NETIF_F_RXCSUM | |
| NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HIGHDMA | |
| NETIF_F_HW_VLAN_CTAG_TX; |
| |
| ndev->hw_features = hw_features; |
| |
| /* Set network device HW mac */ |
| ether_addr_copy(edev->ndev->dev_addr, edev->dev_info.common.hw_mac); |
| } |
| |
| /* This function converts from 32b param to two params of level and module |
| * Input 32b decoding: |
| * b31 - enable all NOTICE prints. NOTICE prints are for deviation from the |
| * 'happy' flow, e.g. memory allocation failed. |
| * b30 - enable all INFO prints. INFO prints are for major steps in the flow |
| * and provide important parameters. |
| * b29-b0 - per-module bitmap, where each bit enables VERBOSE prints of that |
| * module. VERBOSE prints are for tracking the specific flow in low level. |
| * |
| * Notice that the level should be that of the lowest required logs. |
| */ |
| void qede_config_debug(uint debug, u32 *p_dp_module, u8 *p_dp_level) |
| { |
| *p_dp_level = QED_LEVEL_NOTICE; |
| *p_dp_module = 0; |
| |
| if (debug & QED_LOG_VERBOSE_MASK) { |
| *p_dp_level = QED_LEVEL_VERBOSE; |
| *p_dp_module = (debug & 0x3FFFFFFF); |
| } else if (debug & QED_LOG_INFO_MASK) { |
| *p_dp_level = QED_LEVEL_INFO; |
| } else if (debug & QED_LOG_NOTICE_MASK) { |
| *p_dp_level = QED_LEVEL_NOTICE; |
| } |
| } |
| |
| static void qede_free_fp_array(struct qede_dev *edev) |
| { |
| if (edev->fp_array) { |
| struct qede_fastpath *fp; |
| int i; |
| |
| for_each_rss(i) { |
| fp = &edev->fp_array[i]; |
| |
| kfree(fp->sb_info); |
| kfree(fp->rxq); |
| kfree(fp->txqs); |
| } |
| kfree(edev->fp_array); |
| } |
| edev->num_rss = 0; |
| } |
| |
| static int qede_alloc_fp_array(struct qede_dev *edev) |
| { |
| struct qede_fastpath *fp; |
| int i; |
| |
| edev->fp_array = kcalloc(QEDE_RSS_CNT(edev), |
| sizeof(*edev->fp_array), GFP_KERNEL); |
| if (!edev->fp_array) { |
| DP_NOTICE(edev, "fp array allocation failed\n"); |
| goto err; |
| } |
| |
| for_each_rss(i) { |
| fp = &edev->fp_array[i]; |
| |
| fp->sb_info = kcalloc(1, sizeof(*fp->sb_info), GFP_KERNEL); |
| if (!fp->sb_info) { |
| DP_NOTICE(edev, "sb info struct allocation failed\n"); |
| goto err; |
| } |
| |
| fp->rxq = kcalloc(1, sizeof(*fp->rxq), GFP_KERNEL); |
| if (!fp->rxq) { |
| DP_NOTICE(edev, "RXQ struct allocation failed\n"); |
| goto err; |
| } |
| |
| fp->txqs = kcalloc(edev->num_tc, sizeof(*fp->txqs), GFP_KERNEL); |
| if (!fp->txqs) { |
| DP_NOTICE(edev, "TXQ array allocation failed\n"); |
| goto err; |
| } |
| } |
| |
| return 0; |
| err: |
| qede_free_fp_array(edev); |
| return -ENOMEM; |
| } |
| |
| static void qede_sp_task(struct work_struct *work) |
| { |
| struct qede_dev *edev = container_of(work, struct qede_dev, |
| sp_task.work); |
| mutex_lock(&edev->qede_lock); |
| |
| if (edev->state == QEDE_STATE_OPEN) { |
| if (test_and_clear_bit(QEDE_SP_RX_MODE, &edev->sp_flags)) |
| qede_config_rx_mode(edev->ndev); |
| } |
| |
| mutex_unlock(&edev->qede_lock); |
| } |
| |
| static void qede_update_pf_params(struct qed_dev *cdev) |
| { |
| struct qed_pf_params pf_params; |
| |
| /* 16 rx + 16 tx */ |
| memset(&pf_params, 0, sizeof(struct qed_pf_params)); |
| pf_params.eth_pf_params.num_cons = 32; |
| qed_ops->common->update_pf_params(cdev, &pf_params); |
| } |
| |
| enum qede_probe_mode { |
| QEDE_PROBE_NORMAL, |
| }; |
| |
| static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level, |
| enum qede_probe_mode mode) |
| { |
| struct qed_slowpath_params params; |
| struct qed_dev_eth_info dev_info; |
| struct qede_dev *edev; |
| struct qed_dev *cdev; |
| int rc; |
| |
| if (unlikely(dp_level & QED_LEVEL_INFO)) |
| pr_notice("Starting qede probe\n"); |
| |
| cdev = qed_ops->common->probe(pdev, QED_PROTOCOL_ETH, |
| dp_module, dp_level); |
| if (!cdev) { |
| rc = -ENODEV; |
| goto err0; |
| } |
| |
| qede_update_pf_params(cdev); |
| |
| /* Start the Slowpath-process */ |
| memset(¶ms, 0, sizeof(struct qed_slowpath_params)); |
| params.int_mode = QED_INT_MODE_MSIX; |
| params.drv_major = QEDE_MAJOR_VERSION; |
| params.drv_minor = QEDE_MINOR_VERSION; |
| params.drv_rev = QEDE_REVISION_VERSION; |
| params.drv_eng = QEDE_ENGINEERING_VERSION; |
| strlcpy(params.name, "qede LAN", QED_DRV_VER_STR_SIZE); |
| rc = qed_ops->common->slowpath_start(cdev, ¶ms); |
| if (rc) { |
| pr_notice("Cannot start slowpath\n"); |
| goto err1; |
| } |
| |
| /* Learn information crucial for qede to progress */ |
| rc = qed_ops->fill_dev_info(cdev, &dev_info); |
| if (rc) |
| goto err2; |
| |
| edev = qede_alloc_etherdev(cdev, pdev, &dev_info, dp_module, |
| dp_level); |
| if (!edev) { |
| rc = -ENOMEM; |
| goto err2; |
| } |
| |
| qede_init_ndev(edev); |
| |
| rc = register_netdev(edev->ndev); |
| if (rc) { |
| DP_NOTICE(edev, "Cannot register net-device\n"); |
| goto err3; |
| } |
| |
| edev->ops->common->set_id(cdev, edev->ndev->name, DRV_MODULE_VERSION); |
| |
| edev->ops->register_ops(cdev, &qede_ll_ops, edev); |
| |
| INIT_DELAYED_WORK(&edev->sp_task, qede_sp_task); |
| mutex_init(&edev->qede_lock); |
| |
| DP_INFO(edev, "Ending successfully qede probe\n"); |
| |
| return 0; |
| |
| err3: |
| free_netdev(edev->ndev); |
| err2: |
| qed_ops->common->slowpath_stop(cdev); |
| err1: |
| qed_ops->common->remove(cdev); |
| err0: |
| return rc; |
| } |
| |
| static int qede_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| u32 dp_module = 0; |
| u8 dp_level = 0; |
| |
| qede_config_debug(debug, &dp_module, &dp_level); |
| |
| return __qede_probe(pdev, dp_module, dp_level, |
| QEDE_PROBE_NORMAL); |
| } |
| |
| enum qede_remove_mode { |
| QEDE_REMOVE_NORMAL, |
| }; |
| |
| static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode) |
| { |
| struct net_device *ndev = pci_get_drvdata(pdev); |
| struct qede_dev *edev = netdev_priv(ndev); |
| struct qed_dev *cdev = edev->cdev; |
| |
| DP_INFO(edev, "Starting qede_remove\n"); |
| |
| cancel_delayed_work_sync(&edev->sp_task); |
| unregister_netdev(ndev); |
| |
| edev->ops->common->set_power_state(cdev, PCI_D0); |
| |
| pci_set_drvdata(pdev, NULL); |
| |
| free_netdev(ndev); |
| |
| /* Use global ops since we've freed edev */ |
| qed_ops->common->slowpath_stop(cdev); |
| qed_ops->common->remove(cdev); |
| |
| pr_notice("Ending successfully qede_remove\n"); |
| } |
| |
| static void qede_remove(struct pci_dev *pdev) |
| { |
| __qede_remove(pdev, QEDE_REMOVE_NORMAL); |
| } |
| |
| /* ------------------------------------------------------------------------- |
| * START OF LOAD / UNLOAD |
| * ------------------------------------------------------------------------- |
| */ |
| |
| static int qede_set_num_queues(struct qede_dev *edev) |
| { |
| int rc; |
| u16 rss_num; |
| |
| /* Setup queues according to possible resources*/ |
| if (edev->req_rss) |
| rss_num = edev->req_rss; |
| else |
| rss_num = netif_get_num_default_rss_queues() * |
| edev->dev_info.common.num_hwfns; |
| |
| rss_num = min_t(u16, QEDE_MAX_RSS_CNT(edev), rss_num); |
| |
| rc = edev->ops->common->set_fp_int(edev->cdev, rss_num); |
| if (rc > 0) { |
| /* Managed to request interrupts for our queues */ |
| edev->num_rss = rc; |
| DP_INFO(edev, "Managed %d [of %d] RSS queues\n", |
| QEDE_RSS_CNT(edev), rss_num); |
| rc = 0; |
| } |
| return rc; |
| } |
| |
| static void qede_free_mem_sb(struct qede_dev *edev, |
| struct qed_sb_info *sb_info) |
| { |
| if (sb_info->sb_virt) |
| dma_free_coherent(&edev->pdev->dev, sizeof(*sb_info->sb_virt), |
| (void *)sb_info->sb_virt, sb_info->sb_phys); |
| } |
| |
| /* This function allocates fast-path status block memory */ |
| static int qede_alloc_mem_sb(struct qede_dev *edev, |
| struct qed_sb_info *sb_info, |
| u16 sb_id) |
| { |
| struct status_block *sb_virt; |
| dma_addr_t sb_phys; |
| int rc; |
| |
| sb_virt = dma_alloc_coherent(&edev->pdev->dev, |
| sizeof(*sb_virt), |
| &sb_phys, GFP_KERNEL); |
| if (!sb_virt) { |
| DP_ERR(edev, "Status block allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| rc = edev->ops->common->sb_init(edev->cdev, sb_info, |
| sb_virt, sb_phys, sb_id, |
| QED_SB_TYPE_L2_QUEUE); |
| if (rc) { |
| DP_ERR(edev, "Status block initialization failed\n"); |
| dma_free_coherent(&edev->pdev->dev, sizeof(*sb_virt), |
| sb_virt, sb_phys); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static void qede_free_rx_buffers(struct qede_dev *edev, |
| struct qede_rx_queue *rxq) |
| { |
| u16 i; |
| |
| for (i = rxq->sw_rx_cons; i != rxq->sw_rx_prod; i++) { |
| struct sw_rx_data *rx_buf; |
| u8 *data; |
| |
| rx_buf = &rxq->sw_rx_ring[i & NUM_RX_BDS_MAX]; |
| data = rx_buf->data; |
| |
| dma_unmap_single(&edev->pdev->dev, |
| dma_unmap_addr(rx_buf, mapping), |
| rxq->rx_buf_size, DMA_FROM_DEVICE); |
| |
| rx_buf->data = NULL; |
| kfree(data); |
| } |
| } |
| |
| static void qede_free_mem_rxq(struct qede_dev *edev, |
| struct qede_rx_queue *rxq) |
| { |
| /* Free rx buffers */ |
| qede_free_rx_buffers(edev, rxq); |
| |
| /* Free the parallel SW ring */ |
| kfree(rxq->sw_rx_ring); |
| |
| /* Free the real RQ ring used by FW */ |
| edev->ops->common->chain_free(edev->cdev, &rxq->rx_bd_ring); |
| edev->ops->common->chain_free(edev->cdev, &rxq->rx_comp_ring); |
| } |
| |
| static int qede_alloc_rx_buffer(struct qede_dev *edev, |
| struct qede_rx_queue *rxq) |
| { |
| struct sw_rx_data *sw_rx_data; |
| struct eth_rx_bd *rx_bd; |
| dma_addr_t mapping; |
| u16 rx_buf_size; |
| u8 *data; |
| |
| rx_buf_size = rxq->rx_buf_size; |
| |
| data = kmalloc(rx_buf_size, GFP_ATOMIC); |
| if (unlikely(!data)) { |
| DP_NOTICE(edev, "Failed to allocate Rx data\n"); |
| return -ENOMEM; |
| } |
| |
| mapping = dma_map_single(&edev->pdev->dev, data, |
| rx_buf_size, DMA_FROM_DEVICE); |
| if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) { |
| kfree(data); |
| DP_NOTICE(edev, "Failed to map Rx buffer\n"); |
| return -ENOMEM; |
| } |
| |
| sw_rx_data = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX]; |
| sw_rx_data->data = data; |
| |
| dma_unmap_addr_set(sw_rx_data, mapping, mapping); |
| |
| /* Advance PROD and get BD pointer */ |
| rx_bd = (struct eth_rx_bd *)qed_chain_produce(&rxq->rx_bd_ring); |
| WARN_ON(!rx_bd); |
| rx_bd->addr.hi = cpu_to_le32(upper_32_bits(mapping)); |
| rx_bd->addr.lo = cpu_to_le32(lower_32_bits(mapping)); |
| |
| rxq->sw_rx_prod++; |
| |
| return 0; |
| } |
| |
| /* This function allocates all memory needed per Rx queue */ |
| static int qede_alloc_mem_rxq(struct qede_dev *edev, |
| struct qede_rx_queue *rxq) |
| { |
| int i, rc, size, num_allocated; |
| |
| rxq->num_rx_buffers = edev->q_num_rx_buffers; |
| |
| rxq->rx_buf_size = NET_IP_ALIGN + |
| ETH_OVERHEAD + |
| edev->ndev->mtu + |
| QEDE_FW_RX_ALIGN_END; |
| |
| /* Allocate the parallel driver ring for Rx buffers */ |
| size = sizeof(*rxq->sw_rx_ring) * NUM_RX_BDS_MAX; |
| rxq->sw_rx_ring = kzalloc(size, GFP_KERNEL); |
| if (!rxq->sw_rx_ring) { |
| DP_ERR(edev, "Rx buffers ring allocation failed\n"); |
| goto err; |
| } |
| |
| /* Allocate FW Rx ring */ |
| rc = edev->ops->common->chain_alloc(edev->cdev, |
| QED_CHAIN_USE_TO_CONSUME_PRODUCE, |
| QED_CHAIN_MODE_NEXT_PTR, |
| NUM_RX_BDS_MAX, |
| sizeof(struct eth_rx_bd), |
| &rxq->rx_bd_ring); |
| |
| if (rc) |
| goto err; |
| |
| /* Allocate FW completion ring */ |
| rc = edev->ops->common->chain_alloc(edev->cdev, |
| QED_CHAIN_USE_TO_CONSUME, |
| QED_CHAIN_MODE_PBL, |
| NUM_RX_BDS_MAX, |
| sizeof(union eth_rx_cqe), |
| &rxq->rx_comp_ring); |
| if (rc) |
| goto err; |
| |
| /* Allocate buffers for the Rx ring */ |
| for (i = 0; i < rxq->num_rx_buffers; i++) { |
| rc = qede_alloc_rx_buffer(edev, rxq); |
| if (rc) |
| break; |
| } |
| num_allocated = i; |
| if (!num_allocated) { |
| DP_ERR(edev, "Rx buffers allocation failed\n"); |
| goto err; |
| } else if (num_allocated < rxq->num_rx_buffers) { |
| DP_NOTICE(edev, |
| "Allocated less buffers than desired (%d allocated)\n", |
| num_allocated); |
| } |
| |
| return 0; |
| |
| err: |
| qede_free_mem_rxq(edev, rxq); |
| return -ENOMEM; |
| } |
| |
| static void qede_free_mem_txq(struct qede_dev *edev, |
| struct qede_tx_queue *txq) |
| { |
| /* Free the parallel SW ring */ |
| kfree(txq->sw_tx_ring); |
| |
| /* Free the real RQ ring used by FW */ |
| edev->ops->common->chain_free(edev->cdev, &txq->tx_pbl); |
| } |
| |
| /* This function allocates all memory needed per Tx queue */ |
| static int qede_alloc_mem_txq(struct qede_dev *edev, |
| struct qede_tx_queue *txq) |
| { |
| int size, rc; |
| union eth_tx_bd_types *p_virt; |
| |
| txq->num_tx_buffers = edev->q_num_tx_buffers; |
| |
| /* Allocate the parallel driver ring for Tx buffers */ |
| size = sizeof(*txq->sw_tx_ring) * NUM_TX_BDS_MAX; |
| txq->sw_tx_ring = kzalloc(size, GFP_KERNEL); |
| if (!txq->sw_tx_ring) { |
| DP_NOTICE(edev, "Tx buffers ring allocation failed\n"); |
| goto err; |
| } |
| |
| rc = edev->ops->common->chain_alloc(edev->cdev, |
| QED_CHAIN_USE_TO_CONSUME_PRODUCE, |
| QED_CHAIN_MODE_PBL, |
| NUM_TX_BDS_MAX, |
| sizeof(*p_virt), |
| &txq->tx_pbl); |
| if (rc) |
| goto err; |
| |
| return 0; |
| |
| err: |
| qede_free_mem_txq(edev, txq); |
| return -ENOMEM; |
| } |
| |
| /* This function frees all memory of a single fp */ |
| static void qede_free_mem_fp(struct qede_dev *edev, |
| struct qede_fastpath *fp) |
| { |
| int tc; |
| |
| qede_free_mem_sb(edev, fp->sb_info); |
| |
| qede_free_mem_rxq(edev, fp->rxq); |
| |
| for (tc = 0; tc < edev->num_tc; tc++) |
| qede_free_mem_txq(edev, &fp->txqs[tc]); |
| } |
| |
| /* This function allocates all memory needed for a single fp (i.e. an entity |
| * which contains status block, one rx queue and multiple per-TC tx queues. |
| */ |
| static int qede_alloc_mem_fp(struct qede_dev *edev, |
| struct qede_fastpath *fp) |
| { |
| int rc, tc; |
| |
| rc = qede_alloc_mem_sb(edev, fp->sb_info, fp->rss_id); |
| if (rc) |
| goto err; |
| |
| rc = qede_alloc_mem_rxq(edev, fp->rxq); |
| if (rc) |
| goto err; |
| |
| for (tc = 0; tc < edev->num_tc; tc++) { |
| rc = qede_alloc_mem_txq(edev, &fp->txqs[tc]); |
| if (rc) |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| qede_free_mem_fp(edev, fp); |
| return -ENOMEM; |
| } |
| |
| static void qede_free_mem_load(struct qede_dev *edev) |
| { |
| int i; |
| |
| for_each_rss(i) { |
| struct qede_fastpath *fp = &edev->fp_array[i]; |
| |
| qede_free_mem_fp(edev, fp); |
| } |
| } |
| |
| /* This function allocates all qede memory at NIC load. */ |
| static int qede_alloc_mem_load(struct qede_dev *edev) |
| { |
| int rc = 0, rss_id; |
| |
| for (rss_id = 0; rss_id < QEDE_RSS_CNT(edev); rss_id++) { |
| struct qede_fastpath *fp = &edev->fp_array[rss_id]; |
| |
| rc = qede_alloc_mem_fp(edev, fp); |
| if (rc) |
| break; |
| } |
| |
| if (rss_id != QEDE_RSS_CNT(edev)) { |
| /* Failed allocating memory for all the queues */ |
| if (!rss_id) { |
| DP_ERR(edev, |
| "Failed to allocate memory for the leading queue\n"); |
| rc = -ENOMEM; |
| } else { |
| DP_NOTICE(edev, |
| "Failed to allocate memory for all of RSS queues\n Desired: %d queues, allocated: %d queues\n", |
| QEDE_RSS_CNT(edev), rss_id); |
| } |
| edev->num_rss = rss_id; |
| } |
| |
| return 0; |
| } |
| |
| /* This function inits fp content and resets the SB, RXQ and TXQ structures */ |
| static void qede_init_fp(struct qede_dev *edev) |
| { |
| int rss_id, txq_index, tc; |
| struct qede_fastpath *fp; |
| |
| for_each_rss(rss_id) { |
| fp = &edev->fp_array[rss_id]; |
| |
| fp->edev = edev; |
| fp->rss_id = rss_id; |
| |
| memset((void *)&fp->napi, 0, sizeof(fp->napi)); |
| |
| memset((void *)fp->sb_info, 0, sizeof(*fp->sb_info)); |
| |
| memset((void *)fp->rxq, 0, sizeof(*fp->rxq)); |
| fp->rxq->rxq_id = rss_id; |
| |
| memset((void *)fp->txqs, 0, (edev->num_tc * sizeof(*fp->txqs))); |
| for (tc = 0; tc < edev->num_tc; tc++) { |
| txq_index = tc * QEDE_RSS_CNT(edev) + rss_id; |
| fp->txqs[tc].index = txq_index; |
| } |
| |
| snprintf(fp->name, sizeof(fp->name), "%s-fp-%d", |
| edev->ndev->name, rss_id); |
| } |
| } |
| |
| static int qede_set_real_num_queues(struct qede_dev *edev) |
| { |
| int rc = 0; |
| |
| rc = netif_set_real_num_tx_queues(edev->ndev, QEDE_TSS_CNT(edev)); |
| if (rc) { |
| DP_NOTICE(edev, "Failed to set real number of Tx queues\n"); |
| return rc; |
| } |
| rc = netif_set_real_num_rx_queues(edev->ndev, QEDE_RSS_CNT(edev)); |
| if (rc) { |
| DP_NOTICE(edev, "Failed to set real number of Rx queues\n"); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static void qede_napi_disable_remove(struct qede_dev *edev) |
| { |
| int i; |
| |
| for_each_rss(i) { |
| napi_disable(&edev->fp_array[i].napi); |
| |
| netif_napi_del(&edev->fp_array[i].napi); |
| } |
| } |
| |
| static void qede_napi_add_enable(struct qede_dev *edev) |
| { |
| int i; |
| |
| /* Add NAPI objects */ |
| for_each_rss(i) { |
| netif_napi_add(edev->ndev, &edev->fp_array[i].napi, |
| qede_poll, NAPI_POLL_WEIGHT); |
| napi_enable(&edev->fp_array[i].napi); |
| } |
| } |
| |
| static void qede_sync_free_irqs(struct qede_dev *edev) |
| { |
| int i; |
| |
| for (i = 0; i < edev->int_info.used_cnt; i++) { |
| if (edev->int_info.msix_cnt) { |
| synchronize_irq(edev->int_info.msix[i].vector); |
| free_irq(edev->int_info.msix[i].vector, |
| &edev->fp_array[i]); |
| } else { |
| edev->ops->common->simd_handler_clean(edev->cdev, i); |
| } |
| } |
| |
| edev->int_info.used_cnt = 0; |
| } |
| |
| static int qede_req_msix_irqs(struct qede_dev *edev) |
| { |
| int i, rc; |
| |
| /* Sanitize number of interrupts == number of prepared RSS queues */ |
| if (QEDE_RSS_CNT(edev) > edev->int_info.msix_cnt) { |
| DP_ERR(edev, |
| "Interrupt mismatch: %d RSS queues > %d MSI-x vectors\n", |
| QEDE_RSS_CNT(edev), edev->int_info.msix_cnt); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < QEDE_RSS_CNT(edev); i++) { |
| rc = request_irq(edev->int_info.msix[i].vector, |
| qede_msix_fp_int, 0, edev->fp_array[i].name, |
| &edev->fp_array[i]); |
| if (rc) { |
| DP_ERR(edev, "Request fp %d irq failed\n", i); |
| qede_sync_free_irqs(edev); |
| return rc; |
| } |
| DP_VERBOSE(edev, NETIF_MSG_INTR, |
| "Requested fp irq for %s [entry %d]. Cookie is at %p\n", |
| edev->fp_array[i].name, i, |
| &edev->fp_array[i]); |
| edev->int_info.used_cnt++; |
| } |
| |
| return 0; |
| } |
| |
| static void qede_simd_fp_handler(void *cookie) |
| { |
| struct qede_fastpath *fp = (struct qede_fastpath *)cookie; |
| |
| napi_schedule_irqoff(&fp->napi); |
| } |
| |
| static int qede_setup_irqs(struct qede_dev *edev) |
| { |
| int i, rc = 0; |
| |
| /* Learn Interrupt configuration */ |
| rc = edev->ops->common->get_fp_int(edev->cdev, &edev->int_info); |
| if (rc) |
| return rc; |
| |
| if (edev->int_info.msix_cnt) { |
| rc = qede_req_msix_irqs(edev); |
| if (rc) |
| return rc; |
| edev->ndev->irq = edev->int_info.msix[0].vector; |
| } else { |
| const struct qed_common_ops *ops; |
| |
| /* qed should learn receive the RSS ids and callbacks */ |
| ops = edev->ops->common; |
| for (i = 0; i < QEDE_RSS_CNT(edev); i++) |
| ops->simd_handler_config(edev->cdev, |
| &edev->fp_array[i], i, |
| qede_simd_fp_handler); |
| edev->int_info.used_cnt = QEDE_RSS_CNT(edev); |
| } |
| return 0; |
| } |
| |
| static int qede_drain_txq(struct qede_dev *edev, |
| struct qede_tx_queue *txq, |
| bool allow_drain) |
| { |
| int rc, cnt = 1000; |
| |
| while (txq->sw_tx_cons != txq->sw_tx_prod) { |
| if (!cnt) { |
| if (allow_drain) { |
| DP_NOTICE(edev, |
| "Tx queue[%d] is stuck, requesting MCP to drain\n", |
| txq->index); |
| rc = edev->ops->common->drain(edev->cdev); |
| if (rc) |
| return rc; |
| return qede_drain_txq(edev, txq, false); |
| } |
| DP_NOTICE(edev, |
| "Timeout waiting for tx queue[%d]: PROD=%d, CONS=%d\n", |
| txq->index, txq->sw_tx_prod, |
| txq->sw_tx_cons); |
| return -ENODEV; |
| } |
| cnt--; |
| usleep_range(1000, 2000); |
| barrier(); |
| } |
| |
| /* FW finished processing, wait for HW to transmit all tx packets */ |
| usleep_range(1000, 2000); |
| |
| return 0; |
| } |
| |
| static int qede_stop_queues(struct qede_dev *edev) |
| { |
| struct qed_update_vport_params vport_update_params; |
| struct qed_dev *cdev = edev->cdev; |
| int rc, tc, i; |
| |
| /* Disable the vport */ |
| memset(&vport_update_params, 0, sizeof(vport_update_params)); |
| vport_update_params.vport_id = 0; |
| vport_update_params.update_vport_active_flg = 1; |
| vport_update_params.vport_active_flg = 0; |
| vport_update_params.update_rss_flg = 0; |
| |
| rc = edev->ops->vport_update(cdev, &vport_update_params); |
| if (rc) { |
| DP_ERR(edev, "Failed to update vport\n"); |
| return rc; |
| } |
| |
| /* Flush Tx queues. If needed, request drain from MCP */ |
| for_each_rss(i) { |
| struct qede_fastpath *fp = &edev->fp_array[i]; |
| |
| for (tc = 0; tc < edev->num_tc; tc++) { |
| struct qede_tx_queue *txq = &fp->txqs[tc]; |
| |
| rc = qede_drain_txq(edev, txq, true); |
| if (rc) |
| return rc; |
| } |
| } |
| |
| /* Stop all Queues in reverse order*/ |
| for (i = QEDE_RSS_CNT(edev) - 1; i >= 0; i--) { |
| struct qed_stop_rxq_params rx_params; |
| |
| /* Stop the Tx Queue(s)*/ |
| for (tc = 0; tc < edev->num_tc; tc++) { |
| struct qed_stop_txq_params tx_params; |
| |
| tx_params.rss_id = i; |
| tx_params.tx_queue_id = tc * QEDE_RSS_CNT(edev) + i; |
| rc = edev->ops->q_tx_stop(cdev, &tx_params); |
| if (rc) { |
| DP_ERR(edev, "Failed to stop TXQ #%d\n", |
| tx_params.tx_queue_id); |
| return rc; |
| } |
| } |
| |
| /* Stop the Rx Queue*/ |
| memset(&rx_params, 0, sizeof(rx_params)); |
| rx_params.rss_id = i; |
| rx_params.rx_queue_id = i; |
| |
| rc = edev->ops->q_rx_stop(cdev, &rx_params); |
| if (rc) { |
| DP_ERR(edev, "Failed to stop RXQ #%d\n", i); |
| return rc; |
| } |
| } |
| |
| /* Stop the vport */ |
| rc = edev->ops->vport_stop(cdev, 0); |
| if (rc) |
| DP_ERR(edev, "Failed to stop VPORT\n"); |
| |
| return rc; |
| } |
| |
| static int qede_start_queues(struct qede_dev *edev) |
| { |
| int rc, tc, i; |
| int vport_id = 0, drop_ttl0_flg = 1, vlan_removal_en = 1; |
| struct qed_dev *cdev = edev->cdev; |
| struct qed_update_vport_rss_params *rss_params = &edev->rss_params; |
| struct qed_update_vport_params vport_update_params; |
| struct qed_queue_start_common_params q_params; |
| |
| if (!edev->num_rss) { |
| DP_ERR(edev, |
| "Cannot update V-VPORT as active as there are no Rx queues\n"); |
| return -EINVAL; |
| } |
| |
| rc = edev->ops->vport_start(cdev, vport_id, |
| edev->ndev->mtu, |
| drop_ttl0_flg, |
| vlan_removal_en); |
| |
| if (rc) { |
| DP_ERR(edev, "Start V-PORT failed %d\n", rc); |
| return rc; |
| } |
| |
| DP_VERBOSE(edev, NETIF_MSG_IFUP, |
| "Start vport ramrod passed, vport_id = %d, MTU = %d, vlan_removal_en = %d\n", |
| vport_id, edev->ndev->mtu + 0xe, vlan_removal_en); |
| |
| for_each_rss(i) { |
| struct qede_fastpath *fp = &edev->fp_array[i]; |
| dma_addr_t phys_table = fp->rxq->rx_comp_ring.pbl.p_phys_table; |
| |
| memset(&q_params, 0, sizeof(q_params)); |
| q_params.rss_id = i; |
| q_params.queue_id = i; |
| q_params.vport_id = 0; |
| q_params.sb = fp->sb_info->igu_sb_id; |
| q_params.sb_idx = RX_PI; |
| |
| rc = edev->ops->q_rx_start(cdev, &q_params, |
| fp->rxq->rx_buf_size, |
| fp->rxq->rx_bd_ring.p_phys_addr, |
| phys_table, |
| fp->rxq->rx_comp_ring.page_cnt, |
| &fp->rxq->hw_rxq_prod_addr); |
| if (rc) { |
| DP_ERR(edev, "Start RXQ #%d failed %d\n", i, rc); |
| return rc; |
| } |
| |
| fp->rxq->hw_cons_ptr = &fp->sb_info->sb_virt->pi_array[RX_PI]; |
| |
| qede_update_rx_prod(edev, fp->rxq); |
| |
| for (tc = 0; tc < edev->num_tc; tc++) { |
| struct qede_tx_queue *txq = &fp->txqs[tc]; |
| int txq_index = tc * QEDE_RSS_CNT(edev) + i; |
| |
| memset(&q_params, 0, sizeof(q_params)); |
| q_params.rss_id = i; |
| q_params.queue_id = txq_index; |
| q_params.vport_id = 0; |
| q_params.sb = fp->sb_info->igu_sb_id; |
| q_params.sb_idx = TX_PI(tc); |
| |
| rc = edev->ops->q_tx_start(cdev, &q_params, |
| txq->tx_pbl.pbl.p_phys_table, |
| txq->tx_pbl.page_cnt, |
| &txq->doorbell_addr); |
| if (rc) { |
| DP_ERR(edev, "Start TXQ #%d failed %d\n", |
| txq_index, rc); |
| return rc; |
| } |
| |
| txq->hw_cons_ptr = |
| &fp->sb_info->sb_virt->pi_array[TX_PI(tc)]; |
| SET_FIELD(txq->tx_db.data.params, |
| ETH_DB_DATA_DEST, DB_DEST_XCM); |
| SET_FIELD(txq->tx_db.data.params, ETH_DB_DATA_AGG_CMD, |
| DB_AGG_CMD_SET); |
| SET_FIELD(txq->tx_db.data.params, |
| ETH_DB_DATA_AGG_VAL_SEL, |
| DQ_XCM_ETH_TX_BD_PROD_CMD); |
| |
| txq->tx_db.data.agg_flags = DQ_XCM_ETH_DQ_CF_CMD; |
| } |
| } |
| |
| /* Prepare and send the vport enable */ |
| memset(&vport_update_params, 0, sizeof(vport_update_params)); |
| vport_update_params.vport_id = vport_id; |
| vport_update_params.update_vport_active_flg = 1; |
| vport_update_params.vport_active_flg = 1; |
| |
| /* Fill struct with RSS params */ |
| if (QEDE_RSS_CNT(edev) > 1) { |
| vport_update_params.update_rss_flg = 1; |
| for (i = 0; i < 128; i++) |
| rss_params->rss_ind_table[i] = |
| ethtool_rxfh_indir_default(i, QEDE_RSS_CNT(edev)); |
| netdev_rss_key_fill(rss_params->rss_key, |
| sizeof(rss_params->rss_key)); |
| } else { |
| memset(rss_params, 0, sizeof(*rss_params)); |
| } |
| memcpy(&vport_update_params.rss_params, rss_params, |
| sizeof(*rss_params)); |
| |
| rc = edev->ops->vport_update(cdev, &vport_update_params); |
| if (rc) { |
| DP_ERR(edev, "Update V-PORT failed %d\n", rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int qede_set_mcast_rx_mac(struct qede_dev *edev, |
| enum qed_filter_xcast_params_type opcode, |
| unsigned char *mac, int num_macs) |
| { |
| struct qed_filter_params filter_cmd; |
| int i; |
| |
| memset(&filter_cmd, 0, sizeof(filter_cmd)); |
| filter_cmd.type = QED_FILTER_TYPE_MCAST; |
| filter_cmd.filter.mcast.type = opcode; |
| filter_cmd.filter.mcast.num = num_macs; |
| |
| for (i = 0; i < num_macs; i++, mac += ETH_ALEN) |
| ether_addr_copy(filter_cmd.filter.mcast.mac[i], mac); |
| |
| return edev->ops->filter_config(edev->cdev, &filter_cmd); |
| } |
| |
| enum qede_unload_mode { |
| QEDE_UNLOAD_NORMAL, |
| }; |
| |
| static void qede_unload(struct qede_dev *edev, enum qede_unload_mode mode) |
| { |
| struct qed_link_params link_params; |
| int rc; |
| |
| DP_INFO(edev, "Starting qede unload\n"); |
| |
| mutex_lock(&edev->qede_lock); |
| edev->state = QEDE_STATE_CLOSED; |
| |
| /* Close OS Tx */ |
| netif_tx_disable(edev->ndev); |
| netif_carrier_off(edev->ndev); |
| |
| /* Reset the link */ |
| memset(&link_params, 0, sizeof(link_params)); |
| link_params.link_up = false; |
| edev->ops->common->set_link(edev->cdev, &link_params); |
| rc = qede_stop_queues(edev); |
| if (rc) { |
| qede_sync_free_irqs(edev); |
| goto out; |
| } |
| |
| DP_INFO(edev, "Stopped Queues\n"); |
| |
| edev->ops->fastpath_stop(edev->cdev); |
| |
| /* Release the interrupts */ |
| qede_sync_free_irqs(edev); |
| edev->ops->common->set_fp_int(edev->cdev, 0); |
| |
| qede_napi_disable_remove(edev); |
| |
| qede_free_mem_load(edev); |
| qede_free_fp_array(edev); |
| |
| out: |
| mutex_unlock(&edev->qede_lock); |
| DP_INFO(edev, "Ending qede unload\n"); |
| } |
| |
| enum qede_load_mode { |
| QEDE_LOAD_NORMAL, |
| }; |
| |
| static int qede_load(struct qede_dev *edev, enum qede_load_mode mode) |
| { |
| struct qed_link_params link_params; |
| struct qed_link_output link_output; |
| int rc; |
| |
| DP_INFO(edev, "Starting qede load\n"); |
| |
| rc = qede_set_num_queues(edev); |
| if (rc) |
| goto err0; |
| |
| rc = qede_alloc_fp_array(edev); |
| if (rc) |
| goto err0; |
| |
| qede_init_fp(edev); |
| |
| rc = qede_alloc_mem_load(edev); |
| if (rc) |
| goto err1; |
| DP_INFO(edev, "Allocated %d RSS queues on %d TC/s\n", |
| QEDE_RSS_CNT(edev), edev->num_tc); |
| |
| rc = qede_set_real_num_queues(edev); |
| if (rc) |
| goto err2; |
| |
| qede_napi_add_enable(edev); |
| DP_INFO(edev, "Napi added and enabled\n"); |
| |
| rc = qede_setup_irqs(edev); |
| if (rc) |
| goto err3; |
| DP_INFO(edev, "Setup IRQs succeeded\n"); |
| |
| rc = qede_start_queues(edev); |
| if (rc) |
| goto err4; |
| DP_INFO(edev, "Start VPORT, RXQ and TXQ succeeded\n"); |
| |
| /* Add primary mac and set Rx filters */ |
| ether_addr_copy(edev->primary_mac, edev->ndev->dev_addr); |
| |
| mutex_lock(&edev->qede_lock); |
| edev->state = QEDE_STATE_OPEN; |
| mutex_unlock(&edev->qede_lock); |
| |
| /* Ask for link-up using current configuration */ |
| memset(&link_params, 0, sizeof(link_params)); |
| link_params.link_up = true; |
| edev->ops->common->set_link(edev->cdev, &link_params); |
| |
| /* Query whether link is already-up */ |
| memset(&link_output, 0, sizeof(link_output)); |
| edev->ops->common->get_link(edev->cdev, &link_output); |
| qede_link_update(edev, &link_output); |
| |
| DP_INFO(edev, "Ending successfully qede load\n"); |
| |
| return 0; |
| |
| err4: |
| qede_sync_free_irqs(edev); |
| memset(&edev->int_info.msix_cnt, 0, sizeof(struct qed_int_info)); |
| err3: |
| qede_napi_disable_remove(edev); |
| err2: |
| qede_free_mem_load(edev); |
| err1: |
| edev->ops->common->set_fp_int(edev->cdev, 0); |
| qede_free_fp_array(edev); |
| edev->num_rss = 0; |
| err0: |
| return rc; |
| } |
| |
| void qede_reload(struct qede_dev *edev, |
| void (*func)(struct qede_dev *, union qede_reload_args *), |
| union qede_reload_args *args) |
| { |
| qede_unload(edev, QEDE_UNLOAD_NORMAL); |
| /* Call function handler to update parameters |
| * needed for function load. |
| */ |
| if (func) |
| func(edev, args); |
| |
| qede_load(edev, QEDE_LOAD_NORMAL); |
| |
| mutex_lock(&edev->qede_lock); |
| qede_config_rx_mode(edev->ndev); |
| mutex_unlock(&edev->qede_lock); |
| } |
| |
| /* called with rtnl_lock */ |
| static int qede_open(struct net_device *ndev) |
| { |
| struct qede_dev *edev = netdev_priv(ndev); |
| |
| netif_carrier_off(ndev); |
| |
| edev->ops->common->set_power_state(edev->cdev, PCI_D0); |
| |
| return qede_load(edev, QEDE_LOAD_NORMAL); |
| } |
| |
| static int qede_close(struct net_device *ndev) |
| { |
| struct qede_dev *edev = netdev_priv(ndev); |
| |
| qede_unload(edev, QEDE_UNLOAD_NORMAL); |
| |
| return 0; |
| } |
| |
| static void qede_link_update(void *dev, struct qed_link_output *link) |
| { |
| struct qede_dev *edev = dev; |
| |
| if (!netif_running(edev->ndev)) { |
| DP_VERBOSE(edev, NETIF_MSG_LINK, "Interface is not running\n"); |
| return; |
| } |
| |
| if (link->link_up) { |
| DP_NOTICE(edev, "Link is up\n"); |
| netif_tx_start_all_queues(edev->ndev); |
| netif_carrier_on(edev->ndev); |
| } else { |
| DP_NOTICE(edev, "Link is down\n"); |
| netif_tx_disable(edev->ndev); |
| netif_carrier_off(edev->ndev); |
| } |
| } |
| |
| static int qede_set_mac_addr(struct net_device *ndev, void *p) |
| { |
| struct qede_dev *edev = netdev_priv(ndev); |
| struct sockaddr *addr = p; |
| int rc; |
| |
| ASSERT_RTNL(); /* @@@TBD To be removed */ |
| |
| DP_INFO(edev, "Set_mac_addr called\n"); |
| |
| if (!is_valid_ether_addr(addr->sa_data)) { |
| DP_NOTICE(edev, "The MAC address is not valid\n"); |
| return -EFAULT; |
| } |
| |
| ether_addr_copy(ndev->dev_addr, addr->sa_data); |
| |
| if (!netif_running(ndev)) { |
| DP_NOTICE(edev, "The device is currently down\n"); |
| return 0; |
| } |
| |
| /* Remove the previous primary mac */ |
| rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_DEL, |
| edev->primary_mac); |
| if (rc) |
| return rc; |
| |
| /* Add MAC filter according to the new unicast HW MAC address */ |
| ether_addr_copy(edev->primary_mac, ndev->dev_addr); |
| return qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_ADD, |
| edev->primary_mac); |
| } |
| |
| static int |
| qede_configure_mcast_filtering(struct net_device *ndev, |
| enum qed_filter_rx_mode_type *accept_flags) |
| { |
| struct qede_dev *edev = netdev_priv(ndev); |
| unsigned char *mc_macs, *temp; |
| struct netdev_hw_addr *ha; |
| int rc = 0, mc_count; |
| size_t size; |
| |
| size = 64 * ETH_ALEN; |
| |
| mc_macs = kzalloc(size, GFP_KERNEL); |
| if (!mc_macs) { |
| DP_NOTICE(edev, |
| "Failed to allocate memory for multicast MACs\n"); |
| rc = -ENOMEM; |
| goto exit; |
| } |
| |
| temp = mc_macs; |
| |
| /* Remove all previously configured MAC filters */ |
| rc = qede_set_mcast_rx_mac(edev, QED_FILTER_XCAST_TYPE_DEL, |
| mc_macs, 1); |
| if (rc) |
| goto exit; |
| |
| netif_addr_lock_bh(ndev); |
| |
| mc_count = netdev_mc_count(ndev); |
| if (mc_count < 64) { |
| netdev_for_each_mc_addr(ha, ndev) { |
| ether_addr_copy(temp, ha->addr); |
| temp += ETH_ALEN; |
| } |
| } |
| |
| netif_addr_unlock_bh(ndev); |
| |
| /* Check for all multicast @@@TBD resource allocation */ |
| if ((ndev->flags & IFF_ALLMULTI) || |
| (mc_count > 64)) { |
| if (*accept_flags == QED_FILTER_RX_MODE_TYPE_REGULAR) |
| *accept_flags = QED_FILTER_RX_MODE_TYPE_MULTI_PROMISC; |
| } else { |
| /* Add all multicast MAC filters */ |
| rc = qede_set_mcast_rx_mac(edev, QED_FILTER_XCAST_TYPE_ADD, |
| mc_macs, mc_count); |
| } |
| |
| exit: |
| kfree(mc_macs); |
| return rc; |
| } |
| |
| static void qede_set_rx_mode(struct net_device *ndev) |
| { |
| struct qede_dev *edev = netdev_priv(ndev); |
| |
| DP_INFO(edev, "qede_set_rx_mode called\n"); |
| |
| if (edev->state != QEDE_STATE_OPEN) { |
| DP_INFO(edev, |
| "qede_set_rx_mode called while interface is down\n"); |
| } else { |
| set_bit(QEDE_SP_RX_MODE, &edev->sp_flags); |
| schedule_delayed_work(&edev->sp_task, 0); |
| } |
| } |
| |
| /* Must be called with qede_lock held */ |
| static void qede_config_rx_mode(struct net_device *ndev) |
| { |
| enum qed_filter_rx_mode_type accept_flags = QED_FILTER_TYPE_UCAST; |
| struct qede_dev *edev = netdev_priv(ndev); |
| struct qed_filter_params rx_mode; |
| unsigned char *uc_macs, *temp; |
| struct netdev_hw_addr *ha; |
| int rc, uc_count; |
| size_t size; |
| |
| netif_addr_lock_bh(ndev); |
| |
| uc_count = netdev_uc_count(ndev); |
| size = uc_count * ETH_ALEN; |
| |
| uc_macs = kzalloc(size, GFP_ATOMIC); |
| if (!uc_macs) { |
| DP_NOTICE(edev, "Failed to allocate memory for unicast MACs\n"); |
| netif_addr_unlock_bh(ndev); |
| return; |
| } |
| |
| temp = uc_macs; |
| netdev_for_each_uc_addr(ha, ndev) { |
| ether_addr_copy(temp, ha->addr); |
| temp += ETH_ALEN; |
| } |
| |
| netif_addr_unlock_bh(ndev); |
| |
| /* Configure the struct for the Rx mode */ |
| memset(&rx_mode, 0, sizeof(struct qed_filter_params)); |
| rx_mode.type = QED_FILTER_TYPE_RX_MODE; |
| |
| /* Remove all previous unicast secondary macs and multicast macs |
| * (configrue / leave the primary mac) |
| */ |
| rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_REPLACE, |
| edev->primary_mac); |
| if (rc) |
| goto out; |
| |
| /* Check for promiscuous */ |
| if ((ndev->flags & IFF_PROMISC) || |
| (uc_count > 15)) { /* @@@TBD resource allocation - 1 */ |
| accept_flags = QED_FILTER_RX_MODE_TYPE_PROMISC; |
| } else { |
| /* Add MAC filters according to the unicast secondary macs */ |
| int i; |
| |
| temp = uc_macs; |
| for (i = 0; i < uc_count; i++) { |
| rc = qede_set_ucast_rx_mac(edev, |
| QED_FILTER_XCAST_TYPE_ADD, |
| temp); |
| if (rc) |
| goto out; |
| |
| temp += ETH_ALEN; |
| } |
| |
| rc = qede_configure_mcast_filtering(ndev, &accept_flags); |
| if (rc) |
| goto out; |
| } |
| |
| rx_mode.filter.accept_flags = accept_flags; |
| edev->ops->filter_config(edev->cdev, &rx_mode); |
| out: |
| kfree(uc_macs); |
| } |