| /* |
| * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org> |
| * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/debugfs.h> |
| |
| #include "mt7601u.h" |
| #include "eeprom.h" |
| |
| static int |
| mt76_reg_set(void *data, u64 val) |
| { |
| struct mt7601u_dev *dev = data; |
| |
| mt76_wr(dev, dev->debugfs_reg, val); |
| return 0; |
| } |
| |
| static int |
| mt76_reg_get(void *data, u64 *val) |
| { |
| struct mt7601u_dev *dev = data; |
| |
| *val = mt76_rr(dev, dev->debugfs_reg); |
| return 0; |
| } |
| |
| DEFINE_SIMPLE_ATTRIBUTE(fops_regval, mt76_reg_get, mt76_reg_set, "0x%08llx\n"); |
| |
| static int |
| mt7601u_ampdu_stat_read(struct seq_file *file, void *data) |
| { |
| struct mt7601u_dev *dev = file->private; |
| int i, j; |
| |
| #define stat_printf(grp, off, name) \ |
| seq_printf(file, #name ":\t%llu\n", dev->stats.grp[off]) |
| |
| stat_printf(rx_stat, 0, rx_crc_err); |
| stat_printf(rx_stat, 1, rx_phy_err); |
| stat_printf(rx_stat, 2, rx_false_cca); |
| stat_printf(rx_stat, 3, rx_plcp_err); |
| stat_printf(rx_stat, 4, rx_fifo_overflow); |
| stat_printf(rx_stat, 5, rx_duplicate); |
| |
| stat_printf(tx_stat, 0, tx_fail_cnt); |
| stat_printf(tx_stat, 1, tx_bcn_cnt); |
| stat_printf(tx_stat, 2, tx_success); |
| stat_printf(tx_stat, 3, tx_retransmit); |
| stat_printf(tx_stat, 4, tx_zero_len); |
| stat_printf(tx_stat, 5, tx_underflow); |
| |
| stat_printf(aggr_stat, 0, non_aggr_tx); |
| stat_printf(aggr_stat, 1, aggr_tx); |
| |
| stat_printf(zero_len_del, 0, tx_zero_len_del); |
| stat_printf(zero_len_del, 1, rx_zero_len_del); |
| #undef stat_printf |
| |
| seq_puts(file, "Aggregations stats:\n"); |
| for (i = 0; i < 4; i++) { |
| for (j = 0; j < 8; j++) |
| seq_printf(file, "%08llx ", |
| dev->stats.aggr_n[i * 8 + j]); |
| seq_putc(file, '\n'); |
| } |
| |
| seq_printf(file, "recent average AMPDU len: %d\n", |
| atomic_read(&dev->avg_ampdu_len)); |
| |
| return 0; |
| } |
| |
| static int |
| mt7601u_ampdu_stat_open(struct inode *inode, struct file *f) |
| { |
| return single_open(f, mt7601u_ampdu_stat_read, inode->i_private); |
| } |
| |
| static const struct file_operations fops_ampdu_stat = { |
| .open = mt7601u_ampdu_stat_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int |
| mt7601u_eeprom_param_read(struct seq_file *file, void *data) |
| { |
| struct mt7601u_dev *dev = file->private; |
| struct mt7601u_rate_power *rp = &dev->ee->power_rate_table; |
| struct tssi_data *td = &dev->ee->tssi_data; |
| int i; |
| |
| seq_printf(file, "RF freq offset: %hhx\n", dev->ee->rf_freq_off); |
| seq_printf(file, "RSSI offset: %hhx %hhx\n", |
| dev->ee->rssi_offset[0], dev->ee->rssi_offset[1]); |
| seq_printf(file, "Reference temp: %hhx\n", dev->ee->ref_temp); |
| seq_printf(file, "LNA gain: %hhx\n", dev->ee->lna_gain); |
| seq_printf(file, "Reg channels: %hhu-%hhu\n", dev->ee->reg.start, |
| dev->ee->reg.start + dev->ee->reg.num - 1); |
| |
| seq_puts(file, "Per rate power:\n"); |
| for (i = 0; i < 2; i++) |
| seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n", |
| rp->cck[i].raw, rp->cck[i].bw20, rp->cck[i].bw40); |
| for (i = 0; i < 4; i++) |
| seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n", |
| rp->ofdm[i].raw, rp->ofdm[i].bw20, rp->ofdm[i].bw40); |
| for (i = 0; i < 4; i++) |
| seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n", |
| rp->ht[i].raw, rp->ht[i].bw20, rp->ht[i].bw40); |
| |
| seq_puts(file, "Per channel power:\n"); |
| for (i = 0; i < 7; i++) |
| seq_printf(file, "\t tx_power ch%u:%02hhx ch%u:%02hhx\n", |
| i * 2 + 1, dev->ee->chan_pwr[i * 2], |
| i * 2 + 2, dev->ee->chan_pwr[i * 2 + 1]); |
| |
| if (!dev->ee->tssi_enabled) |
| return 0; |
| |
| seq_puts(file, "TSSI:\n"); |
| seq_printf(file, "\t slope:%02hhx\n", td->slope); |
| seq_printf(file, "\t offset=%02hhx %02hhx %02hhx\n", |
| td->offset[0], td->offset[1], td->offset[2]); |
| seq_printf(file, "\t delta_off:%08x\n", td->tx0_delta_offset); |
| |
| return 0; |
| } |
| |
| static int |
| mt7601u_eeprom_param_open(struct inode *inode, struct file *f) |
| { |
| return single_open(f, mt7601u_eeprom_param_read, inode->i_private); |
| } |
| |
| static const struct file_operations fops_eeprom_param = { |
| .open = mt7601u_eeprom_param_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| void mt7601u_init_debugfs(struct mt7601u_dev *dev) |
| { |
| struct dentry *dir; |
| |
| dir = debugfs_create_dir("mt7601u", dev->hw->wiphy->debugfsdir); |
| if (!dir) |
| return; |
| |
| debugfs_create_u8("temperature", S_IRUSR, dir, &dev->raw_temp); |
| debugfs_create_u32("temp_mode", S_IRUSR, dir, &dev->temp_mode); |
| |
| debugfs_create_u32("regidx", S_IRUSR | S_IWUSR, dir, &dev->debugfs_reg); |
| debugfs_create_file("regval", S_IRUSR | S_IWUSR, dir, dev, |
| &fops_regval); |
| debugfs_create_file("ampdu_stat", S_IRUSR, dir, dev, &fops_ampdu_stat); |
| debugfs_create_file("eeprom_param", S_IRUSR, dir, dev, |
| &fops_eeprom_param); |
| } |