| #include <stdio.h> |
| #include <errno.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <stdlib.h> |
| |
| #include "helpers/helpers.h" |
| |
| static const char *cpu_vendor_table[X86_VENDOR_MAX] = { |
| "Unknown", "GenuineIntel", "AuthenticAMD", |
| }; |
| |
| #if defined(__i386__) || defined(__x86_64__) |
| |
| /* from gcc */ |
| #include <cpuid.h> |
| |
| /* |
| * CPUID functions returning a single datum |
| * |
| * Define unsigned int cpuid_e[abcd]x(unsigned int op) |
| */ |
| #define cpuid_func(reg) \ |
| unsigned int cpuid_##reg(unsigned int op) \ |
| { \ |
| unsigned int eax, ebx, ecx, edx; \ |
| __cpuid(op, eax, ebx, ecx, edx); \ |
| return reg; \ |
| } |
| cpuid_func(eax); |
| cpuid_func(ebx); |
| cpuid_func(ecx); |
| cpuid_func(edx); |
| |
| #endif /* defined(__i386__) || defined(__x86_64__) */ |
| |
| /* get_cpu_info |
| * |
| * Extract CPU vendor, family, model, stepping info from /proc/cpuinfo |
| * |
| * Returns 0 on success or a negativ error code |
| * |
| * TBD: Should there be a cpuid alternative for this if /proc is not mounted? |
| */ |
| int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info) |
| { |
| FILE *fp; |
| char value[64]; |
| unsigned int proc, x; |
| unsigned int unknown = 0xffffff; |
| unsigned int cpuid_level, ext_cpuid_level; |
| |
| int ret = -EINVAL; |
| |
| cpu_info->vendor = X86_VENDOR_UNKNOWN; |
| cpu_info->family = unknown; |
| cpu_info->model = unknown; |
| cpu_info->stepping = unknown; |
| cpu_info->caps = 0; |
| |
| fp = fopen("/proc/cpuinfo", "r"); |
| if (!fp) |
| return -EIO; |
| |
| while (!feof(fp)) { |
| if (!fgets(value, 64, fp)) |
| continue; |
| value[63 - 1] = '\0'; |
| |
| if (!strncmp(value, "processor\t: ", 12)) |
| sscanf(value, "processor\t: %u", &proc); |
| |
| if (proc != cpu) |
| continue; |
| |
| /* Get CPU vendor */ |
| if (!strncmp(value, "vendor_id", 9)) { |
| for (x = 1; x < X86_VENDOR_MAX; x++) { |
| if (strstr(value, cpu_vendor_table[x])) |
| cpu_info->vendor = x; |
| } |
| /* Get CPU family, etc. */ |
| } else if (!strncmp(value, "cpu family\t: ", 13)) { |
| sscanf(value, "cpu family\t: %u", |
| &cpu_info->family); |
| } else if (!strncmp(value, "model\t\t: ", 9)) { |
| sscanf(value, "model\t\t: %u", |
| &cpu_info->model); |
| } else if (!strncmp(value, "stepping\t: ", 10)) { |
| sscanf(value, "stepping\t: %u", |
| &cpu_info->stepping); |
| |
| /* Exit -> all values must have been set */ |
| if (cpu_info->vendor == X86_VENDOR_UNKNOWN || |
| cpu_info->family == unknown || |
| cpu_info->model == unknown || |
| cpu_info->stepping == unknown) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = 0; |
| goto out; |
| } |
| } |
| ret = -ENODEV; |
| out: |
| fclose(fp); |
| /* Get some useful CPU capabilities from cpuid */ |
| if (cpu_info->vendor != X86_VENDOR_AMD && |
| cpu_info->vendor != X86_VENDOR_INTEL) |
| return ret; |
| |
| cpuid_level = cpuid_eax(0); |
| ext_cpuid_level = cpuid_eax(0x80000000); |
| |
| /* Invariant TSC */ |
| if (ext_cpuid_level >= 0x80000007 && |
| (cpuid_edx(0x80000007) & (1 << 8))) |
| cpu_info->caps |= CPUPOWER_CAP_INV_TSC; |
| |
| /* Aperf/Mperf registers support */ |
| if (cpuid_level >= 6 && (cpuid_ecx(6) & 0x1)) |
| cpu_info->caps |= CPUPOWER_CAP_APERF; |
| |
| /* AMD Boost state enable/disable register */ |
| if (cpu_info->vendor == X86_VENDOR_AMD) { |
| if (ext_cpuid_level >= 0x80000007 && |
| (cpuid_edx(0x80000007) & (1 << 9))) |
| cpu_info->caps |= CPUPOWER_CAP_AMD_CBP; |
| } |
| |
| if (cpu_info->vendor == X86_VENDOR_INTEL) { |
| if (cpuid_level >= 6 && |
| (cpuid_eax(6) & (1 << 1))) |
| cpu_info->caps |= CPUPOWER_CAP_INTEL_IDA; |
| } |
| |
| if (cpu_info->vendor == X86_VENDOR_INTEL) { |
| /* Intel's perf-bias MSR support */ |
| if (cpuid_level >= 6 && (cpuid_ecx(6) & (1 << 3))) |
| cpu_info->caps |= CPUPOWER_CAP_PERF_BIAS; |
| |
| /* Intel's Turbo Ratio Limit support */ |
| if (cpu_info->family == 6) { |
| switch (cpu_info->model) { |
| case 0x1A: /* Core i7, Xeon 5500 series |
| * Bloomfield, Gainstown NHM-EP |
| */ |
| case 0x1E: /* Core i7 and i5 Processor |
| * Clarksfield, Lynnfield, Jasper Forest |
| */ |
| case 0x1F: /* Core i7 and i5 Processor - Nehalem */ |
| case 0x25: /* Westmere Client |
| * Clarkdale, Arrandale |
| */ |
| case 0x2C: /* Westmere EP - Gulftown */ |
| cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO; |
| case 0x2A: /* SNB */ |
| case 0x2D: /* SNB Xeon */ |
| case 0x3A: /* IVB */ |
| case 0x3E: /* IVB Xeon */ |
| cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO; |
| cpu_info->caps |= CPUPOWER_CAP_IS_SNB; |
| break; |
| case 0x2E: /* Nehalem-EX Xeon - Beckton */ |
| case 0x2F: /* Westmere-EX Xeon - Eagleton */ |
| default: |
| break; |
| } |
| } |
| } |
| |
| /* printf("ID: %u - Extid: 0x%x - Caps: 0x%llx\n", |
| cpuid_level, ext_cpuid_level, cpu_info->caps); |
| */ |
| return ret; |
| } |