| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * SMP support for Hexagon |
| * |
| * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/percpu.h> |
| #include <linux/sched/mm.h> |
| #include <linux/smp.h> |
| #include <linux/spinlock.h> |
| #include <linux/cpu.h> |
| #include <linux/mm_types.h> |
| |
| #include <asm/time.h> /* timer_interrupt */ |
| #include <asm/hexagon_vm.h> |
| |
| #define BASE_IPI_IRQ 26 |
| |
| /* |
| * cpu_possible_mask needs to be filled out prior to setup_per_cpu_areas |
| * (which is prior to any of our smp_prepare_cpu crap), in order to set |
| * up the... per_cpu areas. |
| */ |
| |
| struct ipi_data { |
| unsigned long bits; |
| }; |
| |
| static DEFINE_PER_CPU(struct ipi_data, ipi_data); |
| |
| static inline void __handle_ipi(unsigned long *ops, struct ipi_data *ipi, |
| int cpu) |
| { |
| unsigned long msg = 0; |
| do { |
| msg = find_next_bit(ops, BITS_PER_LONG, msg+1); |
| |
| switch (msg) { |
| |
| case IPI_TIMER: |
| ipi_timer(); |
| break; |
| |
| case IPI_CALL_FUNC: |
| generic_smp_call_function_interrupt(); |
| break; |
| |
| case IPI_CPU_STOP: |
| /* |
| * call vmstop() |
| */ |
| __vmstop(); |
| break; |
| |
| case IPI_RESCHEDULE: |
| scheduler_ipi(); |
| break; |
| } |
| } while (msg < BITS_PER_LONG); |
| } |
| |
| /* Used for IPI call from other CPU's to unmask int */ |
| void smp_vm_unmask_irq(void *info) |
| { |
| __vmintop_locen((long) info); |
| } |
| |
| |
| /* |
| * This is based on Alpha's IPI stuff. |
| * Supposed to take (int, void*) as args now. |
| * Specifically, first arg is irq, second is the irq_desc. |
| */ |
| |
| irqreturn_t handle_ipi(int irq, void *desc) |
| { |
| int cpu = smp_processor_id(); |
| struct ipi_data *ipi = &per_cpu(ipi_data, cpu); |
| unsigned long ops; |
| |
| while ((ops = xchg(&ipi->bits, 0)) != 0) |
| __handle_ipi(&ops, ipi, cpu); |
| return IRQ_HANDLED; |
| } |
| |
| void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg) |
| { |
| unsigned long flags; |
| unsigned long cpu; |
| unsigned long retval; |
| |
| local_irq_save(flags); |
| |
| for_each_cpu(cpu, cpumask) { |
| struct ipi_data *ipi = &per_cpu(ipi_data, cpu); |
| |
| set_bit(msg, &ipi->bits); |
| /* Possible barrier here */ |
| retval = __vmintop_post(BASE_IPI_IRQ+cpu); |
| |
| if (retval != 0) { |
| printk(KERN_ERR "interrupt %ld not configured?\n", |
| BASE_IPI_IRQ+cpu); |
| } |
| } |
| |
| local_irq_restore(flags); |
| } |
| |
| static struct irqaction ipi_intdesc = { |
| .handler = handle_ipi, |
| .flags = IRQF_TRIGGER_RISING, |
| .name = "ipi_handler" |
| }; |
| |
| void __init smp_prepare_boot_cpu(void) |
| { |
| } |
| |
| /* |
| * interrupts should already be disabled from the VM |
| * SP should already be correct; need to set THREADINFO_REG |
| * to point to current thread info |
| */ |
| |
| void start_secondary(void) |
| { |
| unsigned int cpu; |
| unsigned long thread_ptr; |
| |
| /* Calculate thread_info pointer from stack pointer */ |
| __asm__ __volatile__( |
| "%0 = SP;\n" |
| : "=r" (thread_ptr) |
| ); |
| |
| thread_ptr = thread_ptr & ~(THREAD_SIZE-1); |
| |
| __asm__ __volatile__( |
| QUOTED_THREADINFO_REG " = %0;\n" |
| : |
| : "r" (thread_ptr) |
| ); |
| |
| /* Set the memory struct */ |
| mmgrab(&init_mm); |
| current->active_mm = &init_mm; |
| |
| cpu = smp_processor_id(); |
| |
| setup_irq(BASE_IPI_IRQ + cpu, &ipi_intdesc); |
| |
| /* Register the clock_event dummy */ |
| setup_percpu_clockdev(); |
| |
| printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu); |
| |
| notify_cpu_starting(cpu); |
| |
| set_cpu_online(cpu, true); |
| |
| local_irq_enable(); |
| |
| cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); |
| } |
| |
| |
| /* |
| * called once for each present cpu |
| * apparently starts up the CPU and then |
| * maintains control until "cpu_online(cpu)" is set. |
| */ |
| |
| int __cpu_up(unsigned int cpu, struct task_struct *idle) |
| { |
| struct thread_info *thread = (struct thread_info *)idle->stack; |
| void *stack_start; |
| |
| thread->cpu = cpu; |
| |
| /* Boot to the head. */ |
| stack_start = ((void *) thread) + THREAD_SIZE; |
| __vmstart(start_secondary, stack_start); |
| |
| while (!cpu_online(cpu)) |
| barrier(); |
| |
| return 0; |
| } |
| |
| void __init smp_cpus_done(unsigned int max_cpus) |
| { |
| } |
| |
| void __init smp_prepare_cpus(unsigned int max_cpus) |
| { |
| int i; |
| |
| /* |
| * should eventually have some sort of machine |
| * descriptor that has this stuff |
| */ |
| |
| /* Right now, let's just fake it. */ |
| for (i = 0; i < max_cpus; i++) |
| set_cpu_present(i, true); |
| |
| /* Also need to register the interrupts for IPI */ |
| if (max_cpus > 1) |
| setup_irq(BASE_IPI_IRQ, &ipi_intdesc); |
| } |
| |
| void smp_send_reschedule(int cpu) |
| { |
| send_ipi(cpumask_of(cpu), IPI_RESCHEDULE); |
| } |
| |
| void smp_send_stop(void) |
| { |
| struct cpumask targets; |
| cpumask_copy(&targets, cpu_online_mask); |
| cpumask_clear_cpu(smp_processor_id(), &targets); |
| send_ipi(&targets, IPI_CPU_STOP); |
| } |
| |
| void arch_send_call_function_single_ipi(int cpu) |
| { |
| send_ipi(cpumask_of(cpu), IPI_CALL_FUNC); |
| } |
| |
| void arch_send_call_function_ipi_mask(const struct cpumask *mask) |
| { |
| send_ipi(mask, IPI_CALL_FUNC); |
| } |
| |
| int setup_profiling_timer(unsigned int multiplier) |
| { |
| return -EINVAL; |
| } |
| |
| void smp_start_cpus(void) |
| { |
| int i; |
| |
| for (i = 0; i < NR_CPUS; i++) |
| set_cpu_possible(i, true); |
| } |