| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * HWMON driver for ASUS motherboards that publish some sensor values |
| * via the embedded controller registers. |
| * |
| * Copyright (C) 2021 Eugene Shalygin <eugene.shalygin@gmail.com> |
| |
| * EC provides: |
| * - Chipset temperature |
| * - CPU temperature |
| * - Motherboard temperature |
| * - T_Sensor temperature |
| * - VRM temperature |
| * - Water In temperature |
| * - Water Out temperature |
| * - CPU Optional fan RPM |
| * - Chipset fan RPM |
| * - VRM Heat Sink fan RPM |
| * - Water Flow fan RPM |
| * - CPU current |
| * - CPU core voltage |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/bitops.h> |
| #include <linux/dev_printk.h> |
| #include <linux/dmi.h> |
| #include <linux/hwmon.h> |
| #include <linux/init.h> |
| #include <linux/jiffies.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/sort.h> |
| #include <linux/units.h> |
| |
| #include <asm/unaligned.h> |
| |
| static char *mutex_path_override; |
| |
| /* Writing to this EC register switches EC bank */ |
| #define ASUS_EC_BANK_REGISTER 0xff |
| #define SENSOR_LABEL_LEN 16 |
| |
| /* |
| * Arbitrary set max. allowed bank number. Required for sorting banks and |
| * currently is overkill with just 2 banks used at max, but for the sake |
| * of alignment let's set it to a higher value. |
| */ |
| #define ASUS_EC_MAX_BANK 3 |
| |
| #define ACPI_LOCK_DELAY_MS 500 |
| |
| /* ACPI mutex for locking access to the EC for the firmware */ |
| #define ASUS_HW_ACCESS_MUTEX_ASMX "\\AMW0.ASMX" |
| |
| #define MAX_IDENTICAL_BOARD_VARIATIONS 3 |
| |
| /* Moniker for the ACPI global lock (':' is not allowed in ASL identifiers) */ |
| #define ACPI_GLOBAL_LOCK_PSEUDO_PATH ":GLOBAL_LOCK" |
| |
| typedef union { |
| u32 value; |
| struct { |
| u8 index; |
| u8 bank; |
| u8 size; |
| u8 dummy; |
| } components; |
| } sensor_address; |
| |
| #define MAKE_SENSOR_ADDRESS(size, bank, index) { \ |
| .value = (size << 16) + (bank << 8) + index \ |
| } |
| |
| static u32 hwmon_attributes[hwmon_max] = { |
| [hwmon_chip] = HWMON_C_REGISTER_TZ, |
| [hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL, |
| [hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL, |
| [hwmon_curr] = HWMON_C_INPUT | HWMON_C_LABEL, |
| [hwmon_fan] = HWMON_F_INPUT | HWMON_F_LABEL, |
| }; |
| |
| struct ec_sensor_info { |
| char label[SENSOR_LABEL_LEN]; |
| enum hwmon_sensor_types type; |
| sensor_address addr; |
| }; |
| |
| #define EC_SENSOR(sensor_label, sensor_type, size, bank, index) { \ |
| .label = sensor_label, .type = sensor_type, \ |
| .addr = MAKE_SENSOR_ADDRESS(size, bank, index), \ |
| } |
| |
| enum ec_sensors { |
| /* chipset temperature [℃] */ |
| ec_sensor_temp_chipset, |
| /* CPU temperature [℃] */ |
| ec_sensor_temp_cpu, |
| /* motherboard temperature [℃] */ |
| ec_sensor_temp_mb, |
| /* "T_Sensor" temperature sensor reading [℃] */ |
| ec_sensor_temp_t_sensor, |
| /* VRM temperature [℃] */ |
| ec_sensor_temp_vrm, |
| /* CPU Core voltage [mV] */ |
| ec_sensor_in_cpu_core, |
| /* CPU_Opt fan [RPM] */ |
| ec_sensor_fan_cpu_opt, |
| /* VRM heat sink fan [RPM] */ |
| ec_sensor_fan_vrm_hs, |
| /* Chipset fan [RPM] */ |
| ec_sensor_fan_chipset, |
| /* Water flow sensor reading [RPM] */ |
| ec_sensor_fan_water_flow, |
| /* CPU current [A] */ |
| ec_sensor_curr_cpu, |
| /* "Water_In" temperature sensor reading [℃] */ |
| ec_sensor_temp_water_in, |
| /* "Water_Out" temperature sensor reading [℃] */ |
| ec_sensor_temp_water_out, |
| }; |
| |
| #define SENSOR_TEMP_CHIPSET BIT(ec_sensor_temp_chipset) |
| #define SENSOR_TEMP_CPU BIT(ec_sensor_temp_cpu) |
| #define SENSOR_TEMP_MB BIT(ec_sensor_temp_mb) |
| #define SENSOR_TEMP_T_SENSOR BIT(ec_sensor_temp_t_sensor) |
| #define SENSOR_TEMP_VRM BIT(ec_sensor_temp_vrm) |
| #define SENSOR_IN_CPU_CORE BIT(ec_sensor_in_cpu_core) |
| #define SENSOR_FAN_CPU_OPT BIT(ec_sensor_fan_cpu_opt) |
| #define SENSOR_FAN_VRM_HS BIT(ec_sensor_fan_vrm_hs) |
| #define SENSOR_FAN_CHIPSET BIT(ec_sensor_fan_chipset) |
| #define SENSOR_FAN_WATER_FLOW BIT(ec_sensor_fan_water_flow) |
| #define SENSOR_CURR_CPU BIT(ec_sensor_curr_cpu) |
| #define SENSOR_TEMP_WATER_IN BIT(ec_sensor_temp_water_in) |
| #define SENSOR_TEMP_WATER_OUT BIT(ec_sensor_temp_water_out) |
| |
| enum board_family { |
| family_unknown, |
| family_amd_400_series, |
| family_amd_500_series, |
| }; |
| |
| /* All the known sensors for ASUS EC controllers */ |
| static const struct ec_sensor_info sensors_family_amd_400[] = { |
| [ec_sensor_temp_chipset] = |
| EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a), |
| [ec_sensor_temp_cpu] = |
| EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b), |
| [ec_sensor_temp_mb] = |
| EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c), |
| [ec_sensor_temp_t_sensor] = |
| EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d), |
| [ec_sensor_temp_vrm] = |
| EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e), |
| [ec_sensor_in_cpu_core] = |
| EC_SENSOR("CPU Core", hwmon_in, 2, 0x00, 0xa2), |
| [ec_sensor_fan_cpu_opt] = |
| EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xbc), |
| [ec_sensor_fan_vrm_hs] = |
| EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2), |
| [ec_sensor_fan_chipset] = |
| /* no chipset fans in this generation */ |
| EC_SENSOR("Chipset", hwmon_fan, 0, 0x00, 0x00), |
| [ec_sensor_fan_water_flow] = |
| EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xb4), |
| [ec_sensor_curr_cpu] = |
| EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4), |
| [ec_sensor_temp_water_in] = |
| EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x0d), |
| [ec_sensor_temp_water_out] = |
| EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x0b), |
| }; |
| |
| static const struct ec_sensor_info sensors_family_amd_500[] = { |
| [ec_sensor_temp_chipset] = |
| EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a), |
| [ec_sensor_temp_cpu] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b), |
| [ec_sensor_temp_mb] = |
| EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c), |
| [ec_sensor_temp_t_sensor] = |
| EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d), |
| [ec_sensor_temp_vrm] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e), |
| [ec_sensor_in_cpu_core] = |
| EC_SENSOR("CPU Core", hwmon_in, 2, 0x00, 0xa2), |
| [ec_sensor_fan_cpu_opt] = |
| EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0), |
| [ec_sensor_fan_vrm_hs] = EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2), |
| [ec_sensor_fan_chipset] = |
| EC_SENSOR("Chipset", hwmon_fan, 2, 0x00, 0xb4), |
| [ec_sensor_fan_water_flow] = |
| EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xbc), |
| [ec_sensor_curr_cpu] = EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4), |
| [ec_sensor_temp_water_in] = |
| EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00), |
| [ec_sensor_temp_water_out] = |
| EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01), |
| }; |
| |
| /* Shortcuts for common combinations */ |
| #define SENSOR_SET_TEMP_CHIPSET_CPU_MB \ |
| (SENSOR_TEMP_CHIPSET | SENSOR_TEMP_CPU | SENSOR_TEMP_MB) |
| #define SENSOR_SET_TEMP_WATER (SENSOR_TEMP_WATER_IN | SENSOR_TEMP_WATER_OUT) |
| |
| struct ec_board_info { |
| const char *board_names[MAX_IDENTICAL_BOARD_VARIATIONS]; |
| unsigned long sensors; |
| /* |
| * Defines which mutex to use for guarding access to the state and the |
| * hardware. Can be either a full path to an AML mutex or the |
| * pseudo-path ACPI_GLOBAL_LOCK_PSEUDO_PATH to use the global ACPI lock, |
| * or left empty to use a regular mutex object, in which case access to |
| * the hardware is not guarded. |
| */ |
| const char *mutex_path; |
| enum board_family family; |
| }; |
| |
| static const struct ec_board_info board_info[] = { |
| { |
| .board_names = {"PRIME X470-PRO"}, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | |
| SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM | |
| SENSOR_FAN_CPU_OPT | |
| SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE, |
| .mutex_path = ACPI_GLOBAL_LOCK_PSEUDO_PATH, |
| .family = family_amd_400_series, |
| }, |
| { |
| .board_names = {"PRIME X570-PRO"}, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM | |
| SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET, |
| .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX, |
| .family = family_amd_500_series, |
| }, |
| { |
| .board_names = {"ProArt X570-CREATOR WIFI"}, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM | |
| SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CPU_OPT | |
| SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE, |
| }, |
| { |
| .board_names = {"Pro WS X570-ACE"}, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM | |
| SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET | |
| SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE, |
| .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX, |
| .family = family_amd_500_series, |
| }, |
| { |
| .board_names = {"ROG CROSSHAIR VIII DARK HERO"}, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | |
| SENSOR_TEMP_T_SENSOR | |
| SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER | |
| SENSOR_FAN_CPU_OPT | SENSOR_FAN_WATER_FLOW | |
| SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE, |
| .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX, |
| .family = family_amd_500_series, |
| }, |
| { |
| .board_names = { |
| "ROG CROSSHAIR VIII FORMULA" |
| "ROG CROSSHAIR VIII HERO", |
| "ROG CROSSHAIR VIII HERO (WI-FI)", |
| }, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | |
| SENSOR_TEMP_T_SENSOR | |
| SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER | |
| SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET | |
| SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU | |
| SENSOR_IN_CPU_CORE, |
| .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX, |
| .family = family_amd_500_series, |
| }, |
| { |
| .board_names = {"ROG CROSSHAIR VIII IMPACT"}, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | |
| SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM | |
| SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU | |
| SENSOR_IN_CPU_CORE, |
| .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX, |
| .family = family_amd_500_series, |
| }, |
| { |
| .board_names = {"ROG STRIX B550-E GAMING"}, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | |
| SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM | |
| SENSOR_FAN_CPU_OPT, |
| .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX, |
| .family = family_amd_500_series, |
| }, |
| { |
| .board_names = {"ROG STRIX B550-I GAMING"}, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | |
| SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM | |
| SENSOR_FAN_VRM_HS | SENSOR_CURR_CPU | |
| SENSOR_IN_CPU_CORE, |
| .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX, |
| .family = family_amd_500_series, |
| }, |
| { |
| .board_names = {"ROG STRIX X570-E GAMING"}, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | |
| SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM | |
| SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU | |
| SENSOR_IN_CPU_CORE, |
| .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX, |
| .family = family_amd_500_series, |
| }, |
| { |
| .board_names = {"ROG STRIX X570-E GAMING WIFI II"}, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | |
| SENSOR_TEMP_T_SENSOR | SENSOR_CURR_CPU | |
| SENSOR_IN_CPU_CORE, |
| .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX, |
| .family = family_amd_500_series, |
| }, |
| { |
| .board_names = {"ROG STRIX X570-F GAMING"}, |
| .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | |
| SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET, |
| .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX, |
| .family = family_amd_500_series, |
| }, |
| { |
| .board_names = {"ROG STRIX X570-I GAMING"}, |
| .sensors = SENSOR_TEMP_T_SENSOR | SENSOR_FAN_VRM_HS | |
| SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU | |
| SENSOR_IN_CPU_CORE, |
| .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX, |
| .family = family_amd_500_series, |
| }, |
| {} |
| }; |
| |
| struct ec_sensor { |
| unsigned int info_index; |
| s32 cached_value; |
| }; |
| |
| struct lock_data { |
| union { |
| acpi_handle aml; |
| /* global lock handle */ |
| u32 glk; |
| } mutex; |
| bool (*lock)(struct lock_data *data); |
| bool (*unlock)(struct lock_data *data); |
| }; |
| |
| /* |
| * The next function pairs implement options for locking access to the |
| * state and the EC |
| */ |
| static bool lock_via_acpi_mutex(struct lock_data *data) |
| { |
| /* |
| * ASUS DSDT does not specify that access to the EC has to be guarded, |
| * but firmware does access it via ACPI |
| */ |
| return ACPI_SUCCESS(acpi_acquire_mutex(data->mutex.aml, |
| NULL, ACPI_LOCK_DELAY_MS)); |
| } |
| |
| static bool unlock_acpi_mutex(struct lock_data *data) |
| { |
| return ACPI_SUCCESS(acpi_release_mutex(data->mutex.aml, NULL)); |
| } |
| |
| static bool lock_via_global_acpi_lock(struct lock_data *data) |
| { |
| return ACPI_SUCCESS(acpi_acquire_global_lock(ACPI_LOCK_DELAY_MS, |
| &data->mutex.glk)); |
| } |
| |
| static bool unlock_global_acpi_lock(struct lock_data *data) |
| { |
| return ACPI_SUCCESS(acpi_release_global_lock(data->mutex.glk)); |
| } |
| |
| struct ec_sensors_data { |
| const struct ec_board_info *board_info; |
| const struct ec_sensor_info *sensors_info; |
| struct ec_sensor *sensors; |
| /* EC registers to read from */ |
| u16 *registers; |
| u8 *read_buffer; |
| /* sorted list of unique register banks */ |
| u8 banks[ASUS_EC_MAX_BANK + 1]; |
| /* in jiffies */ |
| unsigned long last_updated; |
| struct lock_data lock_data; |
| /* number of board EC sensors */ |
| u8 nr_sensors; |
| /* |
| * number of EC registers to read |
| * (sensor might span more than 1 register) |
| */ |
| u8 nr_registers; |
| /* number of unique register banks */ |
| u8 nr_banks; |
| }; |
| |
| static u8 register_bank(u16 reg) |
| { |
| return reg >> 8; |
| } |
| |
| static u8 register_index(u16 reg) |
| { |
| return reg & 0x00ff; |
| } |
| |
| static bool is_sensor_data_signed(const struct ec_sensor_info *si) |
| { |
| /* |
| * guessed from WMI functions in DSDT code for boards |
| * of the X470 generation |
| */ |
| return si->type == hwmon_temp; |
| } |
| |
| static const struct ec_sensor_info * |
| get_sensor_info(const struct ec_sensors_data *state, int index) |
| { |
| return state->sensors_info + state->sensors[index].info_index; |
| } |
| |
| static int find_ec_sensor_index(const struct ec_sensors_data *ec, |
| enum hwmon_sensor_types type, int channel) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ec->nr_sensors; i++) { |
| if (get_sensor_info(ec, i)->type == type) { |
| if (channel == 0) |
| return i; |
| channel--; |
| } |
| } |
| return -ENOENT; |
| } |
| |
| static int __init bank_compare(const void *a, const void *b) |
| { |
| return *((const s8 *)a) - *((const s8 *)b); |
| } |
| |
| static void __init setup_sensor_data(struct ec_sensors_data *ec) |
| { |
| struct ec_sensor *s = ec->sensors; |
| bool bank_found; |
| int i, j; |
| u8 bank; |
| |
| ec->nr_banks = 0; |
| ec->nr_registers = 0; |
| |
| for_each_set_bit(i, &ec->board_info->sensors, |
| BITS_PER_TYPE(ec->board_info->sensors)) { |
| s->info_index = i; |
| s->cached_value = 0; |
| ec->nr_registers += |
| ec->sensors_info[s->info_index].addr.components.size; |
| bank_found = false; |
| bank = ec->sensors_info[s->info_index].addr.components.bank; |
| for (j = 0; j < ec->nr_banks; j++) { |
| if (ec->banks[j] == bank) { |
| bank_found = true; |
| break; |
| } |
| } |
| if (!bank_found) { |
| ec->banks[ec->nr_banks++] = bank; |
| } |
| s++; |
| } |
| sort(ec->banks, ec->nr_banks, 1, bank_compare, NULL); |
| } |
| |
| static void __init fill_ec_registers(struct ec_sensors_data *ec) |
| { |
| const struct ec_sensor_info *si; |
| unsigned int i, j, register_idx = 0; |
| |
| for (i = 0; i < ec->nr_sensors; ++i) { |
| si = get_sensor_info(ec, i); |
| for (j = 0; j < si->addr.components.size; ++j, ++register_idx) { |
| ec->registers[register_idx] = |
| (si->addr.components.bank << 8) + |
| si->addr.components.index + j; |
| } |
| } |
| } |
| |
| static int __init setup_lock_data(struct device *dev) |
| { |
| const char *mutex_path; |
| int status; |
| struct ec_sensors_data *state = dev_get_drvdata(dev); |
| |
| mutex_path = mutex_path_override ? |
| mutex_path_override : state->board_info->mutex_path; |
| |
| if (!mutex_path || !strlen(mutex_path)) { |
| dev_err(dev, "Hardware access guard mutex name is empty"); |
| return -EINVAL; |
| } |
| if (!strcmp(mutex_path, ACPI_GLOBAL_LOCK_PSEUDO_PATH)) { |
| state->lock_data.mutex.glk = 0; |
| state->lock_data.lock = lock_via_global_acpi_lock; |
| state->lock_data.unlock = unlock_global_acpi_lock; |
| } else { |
| status = acpi_get_handle(NULL, (acpi_string)mutex_path, |
| &state->lock_data.mutex.aml); |
| if (ACPI_FAILURE(status)) { |
| dev_err(dev, |
| "Failed to get hardware access guard AML mutex '%s': error %d", |
| mutex_path, status); |
| return -ENOENT; |
| } |
| state->lock_data.lock = lock_via_acpi_mutex; |
| state->lock_data.unlock = unlock_acpi_mutex; |
| } |
| return 0; |
| } |
| |
| static int asus_ec_bank_switch(u8 bank, u8 *old) |
| { |
| int status = 0; |
| |
| if (old) { |
| status = ec_read(ASUS_EC_BANK_REGISTER, old); |
| } |
| if (status || (old && (*old == bank))) |
| return status; |
| return ec_write(ASUS_EC_BANK_REGISTER, bank); |
| } |
| |
| static int asus_ec_block_read(const struct device *dev, |
| struct ec_sensors_data *ec) |
| { |
| int ireg, ibank, status; |
| u8 bank, reg_bank, prev_bank; |
| |
| bank = 0; |
| status = asus_ec_bank_switch(bank, &prev_bank); |
| if (status) { |
| dev_warn(dev, "EC bank switch failed"); |
| return status; |
| } |
| |
| if (prev_bank) { |
| /* oops... somebody else is working with the EC too */ |
| dev_warn(dev, |
| "Concurrent access to the ACPI EC detected.\nRace condition possible."); |
| } |
| |
| /* read registers minimizing bank switches. */ |
| for (ibank = 0; ibank < ec->nr_banks; ibank++) { |
| if (bank != ec->banks[ibank]) { |
| bank = ec->banks[ibank]; |
| if (asus_ec_bank_switch(bank, NULL)) { |
| dev_warn(dev, "EC bank switch to %d failed", |
| bank); |
| break; |
| } |
| } |
| for (ireg = 0; ireg < ec->nr_registers; ireg++) { |
| reg_bank = register_bank(ec->registers[ireg]); |
| if (reg_bank < bank) { |
| continue; |
| } |
| ec_read(register_index(ec->registers[ireg]), |
| ec->read_buffer + ireg); |
| } |
| } |
| |
| status = asus_ec_bank_switch(prev_bank, NULL); |
| return status; |
| } |
| |
| static inline s32 get_sensor_value(const struct ec_sensor_info *si, u8 *data) |
| { |
| if (is_sensor_data_signed(si)) { |
| switch (si->addr.components.size) { |
| case 1: |
| return (s8)*data; |
| case 2: |
| return (s16)get_unaligned_be16(data); |
| case 4: |
| return (s32)get_unaligned_be32(data); |
| default: |
| return 0; |
| } |
| } else { |
| switch (si->addr.components.size) { |
| case 1: |
| return *data; |
| case 2: |
| return get_unaligned_be16(data); |
| case 4: |
| return get_unaligned_be32(data); |
| default: |
| return 0; |
| } |
| } |
| } |
| |
| static void update_sensor_values(struct ec_sensors_data *ec, u8 *data) |
| { |
| const struct ec_sensor_info *si; |
| struct ec_sensor *s, *sensor_end; |
| |
| sensor_end = ec->sensors + ec->nr_sensors; |
| for (s = ec->sensors; s != sensor_end; s++) { |
| si = ec->sensors_info + s->info_index; |
| s->cached_value = get_sensor_value(si, data); |
| data += si->addr.components.size; |
| } |
| } |
| |
| static int update_ec_sensors(const struct device *dev, |
| struct ec_sensors_data *ec) |
| { |
| int status; |
| |
| if (!ec->lock_data.lock(&ec->lock_data)) { |
| dev_warn(dev, "Failed to acquire mutex"); |
| return -EBUSY; |
| } |
| |
| status = asus_ec_block_read(dev, ec); |
| |
| if (!status) { |
| update_sensor_values(ec, ec->read_buffer); |
| } |
| |
| if (!ec->lock_data.unlock(&ec->lock_data)) |
| dev_err(dev, "Failed to release mutex"); |
| |
| return status; |
| } |
| |
| static long scale_sensor_value(s32 value, int data_type) |
| { |
| switch (data_type) { |
| case hwmon_curr: |
| case hwmon_temp: |
| return value * MILLI; |
| default: |
| return value; |
| } |
| } |
| |
| static int get_cached_value_or_update(const struct device *dev, |
| int sensor_index, |
| struct ec_sensors_data *state, s32 *value) |
| { |
| if (time_after(jiffies, state->last_updated + HZ)) { |
| if (update_ec_sensors(dev, state)) { |
| dev_err(dev, "update_ec_sensors() failure\n"); |
| return -EIO; |
| } |
| |
| state->last_updated = jiffies; |
| } |
| |
| *value = state->sensors[sensor_index].cached_value; |
| return 0; |
| } |
| |
| /* |
| * Now follow the functions that implement the hwmon interface |
| */ |
| |
| static int asus_ec_hwmon_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| int ret; |
| s32 value = 0; |
| |
| struct ec_sensors_data *state = dev_get_drvdata(dev); |
| int sidx = find_ec_sensor_index(state, type, channel); |
| |
| if (sidx < 0) { |
| return sidx; |
| } |
| |
| ret = get_cached_value_or_update(dev, sidx, state, &value); |
| if (!ret) { |
| *val = scale_sensor_value(value, |
| get_sensor_info(state, sidx)->type); |
| } |
| |
| return ret; |
| } |
| |
| static int asus_ec_hwmon_read_string(struct device *dev, |
| enum hwmon_sensor_types type, u32 attr, |
| int channel, const char **str) |
| { |
| struct ec_sensors_data *state = dev_get_drvdata(dev); |
| int sensor_index = find_ec_sensor_index(state, type, channel); |
| *str = get_sensor_info(state, sensor_index)->label; |
| |
| return 0; |
| } |
| |
| static umode_t asus_ec_hwmon_is_visible(const void *drvdata, |
| enum hwmon_sensor_types type, u32 attr, |
| int channel) |
| { |
| const struct ec_sensors_data *state = drvdata; |
| |
| return find_ec_sensor_index(state, type, channel) >= 0 ? S_IRUGO : 0; |
| } |
| |
| static int __init |
| asus_ec_hwmon_add_chan_info(struct hwmon_channel_info *asus_ec_hwmon_chan, |
| struct device *dev, int num, |
| enum hwmon_sensor_types type, u32 config) |
| { |
| int i; |
| u32 *cfg = devm_kcalloc(dev, num + 1, sizeof(*cfg), GFP_KERNEL); |
| |
| if (!cfg) |
| return -ENOMEM; |
| |
| asus_ec_hwmon_chan->type = type; |
| asus_ec_hwmon_chan->config = cfg; |
| for (i = 0; i < num; i++, cfg++) |
| *cfg = config; |
| |
| return 0; |
| } |
| |
| static const struct hwmon_ops asus_ec_hwmon_ops = { |
| .is_visible = asus_ec_hwmon_is_visible, |
| .read = asus_ec_hwmon_read, |
| .read_string = asus_ec_hwmon_read_string, |
| }; |
| |
| static struct hwmon_chip_info asus_ec_chip_info = { |
| .ops = &asus_ec_hwmon_ops, |
| }; |
| |
| static const struct ec_board_info * __init get_board_info(void) |
| { |
| const char *dmi_board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); |
| const char *dmi_board_name = dmi_get_system_info(DMI_BOARD_NAME); |
| const struct ec_board_info *board; |
| |
| if (!dmi_board_vendor || !dmi_board_name || |
| strcasecmp(dmi_board_vendor, "ASUSTeK COMPUTER INC.")) |
| return NULL; |
| |
| for (board = board_info; board->sensors; board++) { |
| if (match_string(board->board_names, |
| MAX_IDENTICAL_BOARD_VARIATIONS, |
| dmi_board_name) >= 0) |
| return board; |
| } |
| |
| return NULL; |
| } |
| |
| static int __init asus_ec_probe(struct platform_device *pdev) |
| { |
| const struct hwmon_channel_info **ptr_asus_ec_ci; |
| int nr_count[hwmon_max] = { 0 }, nr_types = 0; |
| struct hwmon_channel_info *asus_ec_hwmon_chan; |
| const struct ec_board_info *pboard_info; |
| const struct hwmon_chip_info *chip_info; |
| struct device *dev = &pdev->dev; |
| struct ec_sensors_data *ec_data; |
| const struct ec_sensor_info *si; |
| enum hwmon_sensor_types type; |
| struct device *hwdev; |
| unsigned int i; |
| int status; |
| |
| pboard_info = get_board_info(); |
| if (!pboard_info) |
| return -ENODEV; |
| |
| ec_data = devm_kzalloc(dev, sizeof(struct ec_sensors_data), |
| GFP_KERNEL); |
| if (!ec_data) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, ec_data); |
| ec_data->board_info = pboard_info; |
| |
| switch (ec_data->board_info->family) { |
| case family_amd_400_series: |
| ec_data->sensors_info = sensors_family_amd_400; |
| break; |
| case family_amd_500_series: |
| ec_data->sensors_info = sensors_family_amd_500; |
| break; |
| default: |
| dev_err(dev, "Unknown board family: %d", |
| ec_data->board_info->family); |
| return -EINVAL; |
| } |
| |
| ec_data->nr_sensors = hweight_long(ec_data->board_info->sensors); |
| ec_data->sensors = devm_kcalloc(dev, ec_data->nr_sensors, |
| sizeof(struct ec_sensor), GFP_KERNEL); |
| |
| status = setup_lock_data(dev); |
| if (status) { |
| dev_err(dev, "Failed to setup state/EC locking: %d", status); |
| return status; |
| } |
| |
| setup_sensor_data(ec_data); |
| ec_data->registers = devm_kcalloc(dev, ec_data->nr_registers, |
| sizeof(u16), GFP_KERNEL); |
| ec_data->read_buffer = devm_kcalloc(dev, ec_data->nr_registers, |
| sizeof(u8), GFP_KERNEL); |
| |
| if (!ec_data->registers || !ec_data->read_buffer) |
| return -ENOMEM; |
| |
| fill_ec_registers(ec_data); |
| |
| for (i = 0; i < ec_data->nr_sensors; ++i) { |
| si = get_sensor_info(ec_data, i); |
| if (!nr_count[si->type]) |
| ++nr_types; |
| ++nr_count[si->type]; |
| } |
| |
| if (nr_count[hwmon_temp]) |
| nr_count[hwmon_chip]++, nr_types++; |
| |
| asus_ec_hwmon_chan = devm_kcalloc( |
| dev, nr_types, sizeof(*asus_ec_hwmon_chan), GFP_KERNEL); |
| if (!asus_ec_hwmon_chan) |
| return -ENOMEM; |
| |
| ptr_asus_ec_ci = devm_kcalloc(dev, nr_types + 1, |
| sizeof(*ptr_asus_ec_ci), GFP_KERNEL); |
| if (!ptr_asus_ec_ci) |
| return -ENOMEM; |
| |
| asus_ec_chip_info.info = ptr_asus_ec_ci; |
| chip_info = &asus_ec_chip_info; |
| |
| for (type = 0; type < hwmon_max; ++type) { |
| if (!nr_count[type]) |
| continue; |
| |
| asus_ec_hwmon_add_chan_info(asus_ec_hwmon_chan, dev, |
| nr_count[type], type, |
| hwmon_attributes[type]); |
| *ptr_asus_ec_ci++ = asus_ec_hwmon_chan++; |
| } |
| |
| dev_info(dev, "board has %d EC sensors that span %d registers", |
| ec_data->nr_sensors, ec_data->nr_registers); |
| |
| hwdev = devm_hwmon_device_register_with_info(dev, "asusec", |
| ec_data, chip_info, NULL); |
| |
| return PTR_ERR_OR_ZERO(hwdev); |
| } |
| |
| |
| static const struct acpi_device_id acpi_ec_ids[] = { |
| /* Embedded Controller Device */ |
| { "PNP0C09", 0 }, |
| {} |
| }; |
| |
| static struct platform_driver asus_ec_sensors_platform_driver = { |
| .driver = { |
| .name = "asus-ec-sensors", |
| .acpi_match_table = acpi_ec_ids, |
| }, |
| }; |
| |
| MODULE_DEVICE_TABLE(acpi, acpi_ec_ids); |
| /* |
| * we use module_platform_driver_probe() rather than module_platform_driver() |
| * because the probe function (and its dependants) are marked with __init, which |
| * means we can't put it into the .probe member of the platform_driver struct |
| * above, and we can't mark the asus_ec_sensors_platform_driver object as __init |
| * because the object is referenced from the module exit code. |
| */ |
| module_platform_driver_probe(asus_ec_sensors_platform_driver, asus_ec_probe); |
| |
| module_param_named(mutex_path, mutex_path_override, charp, 0); |
| MODULE_PARM_DESC(mutex_path, |
| "Override ACPI mutex path used to guard access to hardware"); |
| |
| MODULE_AUTHOR("Eugene Shalygin <eugene.shalygin@gmail.com>"); |
| MODULE_DESCRIPTION( |
| "HWMON driver for sensors accessible via ACPI EC in ASUS motherboards"); |
| MODULE_LICENSE("GPL"); |