| /* |
| * Copyright © 2016 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * |
| */ |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_dp_dual_mode_helper.h> |
| #include <drm/drm_edid.h> |
| |
| #include "intel_display_types.h" |
| #include "intel_dp.h" |
| #include "intel_lspcon.h" |
| |
| /* LSPCON OUI Vendor ID(signatures) */ |
| #define LSPCON_VENDOR_PARADE_OUI 0x001CF8 |
| #define LSPCON_VENDOR_MCA_OUI 0x0060AD |
| |
| /* AUX addresses to write MCA AVI IF */ |
| #define LSPCON_MCA_AVI_IF_WRITE_OFFSET 0x5C0 |
| #define LSPCON_MCA_AVI_IF_CTRL 0x5DF |
| #define LSPCON_MCA_AVI_IF_KICKOFF (1 << 0) |
| #define LSPCON_MCA_AVI_IF_HANDLED (1 << 1) |
| |
| /* AUX addresses to write Parade AVI IF */ |
| #define LSPCON_PARADE_AVI_IF_WRITE_OFFSET 0x516 |
| #define LSPCON_PARADE_AVI_IF_CTRL 0x51E |
| #define LSPCON_PARADE_AVI_IF_KICKOFF (1 << 7) |
| #define LSPCON_PARADE_AVI_IF_DATA_SIZE 32 |
| |
| static struct intel_dp *lspcon_to_intel_dp(struct intel_lspcon *lspcon) |
| { |
| struct intel_digital_port *dig_port = |
| container_of(lspcon, struct intel_digital_port, lspcon); |
| |
| return &dig_port->dp; |
| } |
| |
| static const char *lspcon_mode_name(enum drm_lspcon_mode mode) |
| { |
| switch (mode) { |
| case DRM_LSPCON_MODE_PCON: |
| return "PCON"; |
| case DRM_LSPCON_MODE_LS: |
| return "LS"; |
| case DRM_LSPCON_MODE_INVALID: |
| return "INVALID"; |
| default: |
| MISSING_CASE(mode); |
| return "INVALID"; |
| } |
| } |
| |
| static bool lspcon_detect_vendor(struct intel_lspcon *lspcon) |
| { |
| struct intel_dp *dp = lspcon_to_intel_dp(lspcon); |
| struct drm_dp_dpcd_ident *ident; |
| u32 vendor_oui; |
| |
| if (drm_dp_read_desc(&dp->aux, &dp->desc, drm_dp_is_branch(dp->dpcd))) { |
| DRM_ERROR("Can't read description\n"); |
| return false; |
| } |
| |
| ident = &dp->desc.ident; |
| vendor_oui = (ident->oui[0] << 16) | (ident->oui[1] << 8) | |
| ident->oui[2]; |
| |
| switch (vendor_oui) { |
| case LSPCON_VENDOR_MCA_OUI: |
| lspcon->vendor = LSPCON_VENDOR_MCA; |
| DRM_DEBUG_KMS("Vendor: Mega Chips\n"); |
| break; |
| |
| case LSPCON_VENDOR_PARADE_OUI: |
| lspcon->vendor = LSPCON_VENDOR_PARADE; |
| DRM_DEBUG_KMS("Vendor: Parade Tech\n"); |
| break; |
| |
| default: |
| DRM_ERROR("Invalid/Unknown vendor OUI\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static enum drm_lspcon_mode lspcon_get_current_mode(struct intel_lspcon *lspcon) |
| { |
| enum drm_lspcon_mode current_mode; |
| struct i2c_adapter *adapter = &lspcon_to_intel_dp(lspcon)->aux.ddc; |
| |
| if (drm_lspcon_get_mode(adapter, ¤t_mode)) { |
| DRM_DEBUG_KMS("Error reading LSPCON mode\n"); |
| return DRM_LSPCON_MODE_INVALID; |
| } |
| return current_mode; |
| } |
| |
| static enum drm_lspcon_mode lspcon_wait_mode(struct intel_lspcon *lspcon, |
| enum drm_lspcon_mode mode) |
| { |
| enum drm_lspcon_mode current_mode; |
| |
| current_mode = lspcon_get_current_mode(lspcon); |
| if (current_mode == mode) |
| goto out; |
| |
| DRM_DEBUG_KMS("Waiting for LSPCON mode %s to settle\n", |
| lspcon_mode_name(mode)); |
| |
| wait_for((current_mode = lspcon_get_current_mode(lspcon)) == mode, 400); |
| if (current_mode != mode) |
| DRM_ERROR("LSPCON mode hasn't settled\n"); |
| |
| out: |
| DRM_DEBUG_KMS("Current LSPCON mode %s\n", |
| lspcon_mode_name(current_mode)); |
| |
| return current_mode; |
| } |
| |
| static int lspcon_change_mode(struct intel_lspcon *lspcon, |
| enum drm_lspcon_mode mode) |
| { |
| int err; |
| enum drm_lspcon_mode current_mode; |
| struct i2c_adapter *adapter = &lspcon_to_intel_dp(lspcon)->aux.ddc; |
| |
| err = drm_lspcon_get_mode(adapter, ¤t_mode); |
| if (err) { |
| DRM_ERROR("Error reading LSPCON mode\n"); |
| return err; |
| } |
| |
| if (current_mode == mode) { |
| DRM_DEBUG_KMS("Current mode = desired LSPCON mode\n"); |
| return 0; |
| } |
| |
| err = drm_lspcon_set_mode(adapter, mode); |
| if (err < 0) { |
| DRM_ERROR("LSPCON mode change failed\n"); |
| return err; |
| } |
| |
| lspcon->mode = mode; |
| DRM_DEBUG_KMS("LSPCON mode changed done\n"); |
| return 0; |
| } |
| |
| static bool lspcon_wake_native_aux_ch(struct intel_lspcon *lspcon) |
| { |
| u8 rev; |
| |
| if (drm_dp_dpcd_readb(&lspcon_to_intel_dp(lspcon)->aux, DP_DPCD_REV, |
| &rev) != 1) { |
| DRM_DEBUG_KMS("Native AUX CH down\n"); |
| return false; |
| } |
| |
| DRM_DEBUG_KMS("Native AUX CH up, DPCD version: %d.%d\n", |
| rev >> 4, rev & 0xf); |
| |
| return true; |
| } |
| |
| void lspcon_ycbcr420_config(struct drm_connector *connector, |
| struct intel_crtc_state *crtc_state) |
| { |
| const struct drm_display_info *info = &connector->display_info; |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->base.adjusted_mode; |
| |
| if (drm_mode_is_420_only(info, adjusted_mode) && |
| connector->ycbcr_420_allowed) { |
| crtc_state->port_clock /= 2; |
| crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR444; |
| crtc_state->lspcon_downsampling = true; |
| } |
| } |
| |
| static bool lspcon_probe(struct intel_lspcon *lspcon) |
| { |
| int retry; |
| enum drm_dp_dual_mode_type adaptor_type; |
| struct i2c_adapter *adapter = &lspcon_to_intel_dp(lspcon)->aux.ddc; |
| enum drm_lspcon_mode expected_mode; |
| |
| expected_mode = lspcon_wake_native_aux_ch(lspcon) ? |
| DRM_LSPCON_MODE_PCON : DRM_LSPCON_MODE_LS; |
| |
| /* Lets probe the adaptor and check its type */ |
| for (retry = 0; retry < 6; retry++) { |
| if (retry) |
| usleep_range(500, 1000); |
| |
| adaptor_type = drm_dp_dual_mode_detect(adapter); |
| if (adaptor_type == DRM_DP_DUAL_MODE_LSPCON) |
| break; |
| } |
| |
| if (adaptor_type != DRM_DP_DUAL_MODE_LSPCON) { |
| DRM_DEBUG_KMS("No LSPCON detected, found %s\n", |
| drm_dp_get_dual_mode_type_name(adaptor_type)); |
| return false; |
| } |
| |
| /* Yay ... got a LSPCON device */ |
| DRM_DEBUG_KMS("LSPCON detected\n"); |
| lspcon->mode = lspcon_wait_mode(lspcon, expected_mode); |
| |
| /* |
| * In the SW state machine, lets Put LSPCON in PCON mode only. |
| * In this way, it will work with both HDMI 1.4 sinks as well as HDMI |
| * 2.0 sinks. |
| */ |
| if (lspcon->mode != DRM_LSPCON_MODE_PCON) { |
| if (lspcon_change_mode(lspcon, DRM_LSPCON_MODE_PCON) < 0) { |
| DRM_ERROR("LSPCON mode change to PCON failed\n"); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon) |
| { |
| struct intel_dp *intel_dp = lspcon_to_intel_dp(lspcon); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| unsigned long start = jiffies; |
| |
| while (1) { |
| if (intel_digital_port_connected(&dig_port->base)) { |
| DRM_DEBUG_KMS("LSPCON recovering in PCON mode after %u ms\n", |
| jiffies_to_msecs(jiffies - start)); |
| return; |
| } |
| |
| if (time_after(jiffies, start + msecs_to_jiffies(1000))) |
| break; |
| |
| usleep_range(10000, 15000); |
| } |
| |
| DRM_DEBUG_KMS("LSPCON DP descriptor mismatch after resume\n"); |
| } |
| |
| static bool lspcon_parade_fw_ready(struct drm_dp_aux *aux) |
| { |
| u8 avi_if_ctrl; |
| u8 retry; |
| ssize_t ret; |
| |
| /* Check if LSPCON FW is ready for data */ |
| for (retry = 0; retry < 5; retry++) { |
| if (retry) |
| usleep_range(200, 300); |
| |
| ret = drm_dp_dpcd_read(aux, LSPCON_PARADE_AVI_IF_CTRL, |
| &avi_if_ctrl, 1); |
| if (ret < 0) { |
| DRM_ERROR("Failed to read AVI IF control\n"); |
| return false; |
| } |
| |
| if ((avi_if_ctrl & LSPCON_PARADE_AVI_IF_KICKOFF) == 0) |
| return true; |
| } |
| |
| DRM_ERROR("Parade FW not ready to accept AVI IF\n"); |
| return false; |
| } |
| |
| static bool _lspcon_parade_write_infoframe_blocks(struct drm_dp_aux *aux, |
| u8 *avi_buf) |
| { |
| u8 avi_if_ctrl; |
| u8 block_count = 0; |
| u8 *data; |
| u16 reg; |
| ssize_t ret; |
| |
| while (block_count < 4) { |
| if (!lspcon_parade_fw_ready(aux)) { |
| DRM_DEBUG_KMS("LSPCON FW not ready, block %d\n", |
| block_count); |
| return false; |
| } |
| |
| reg = LSPCON_PARADE_AVI_IF_WRITE_OFFSET; |
| data = avi_buf + block_count * 8; |
| ret = drm_dp_dpcd_write(aux, reg, data, 8); |
| if (ret < 0) { |
| DRM_ERROR("Failed to write AVI IF block %d\n", |
| block_count); |
| return false; |
| } |
| |
| /* |
| * Once a block of data is written, we have to inform the FW |
| * about this by writing into avi infoframe control register: |
| * - set the kickoff bit[7] to 1 |
| * - write the block no. to bits[1:0] |
| */ |
| reg = LSPCON_PARADE_AVI_IF_CTRL; |
| avi_if_ctrl = LSPCON_PARADE_AVI_IF_KICKOFF | block_count; |
| ret = drm_dp_dpcd_write(aux, reg, &avi_if_ctrl, 1); |
| if (ret < 0) { |
| DRM_ERROR("Failed to update (0x%x), block %d\n", |
| reg, block_count); |
| return false; |
| } |
| |
| block_count++; |
| } |
| |
| DRM_DEBUG_KMS("Wrote AVI IF blocks successfully\n"); |
| return true; |
| } |
| |
| static bool _lspcon_write_avi_infoframe_parade(struct drm_dp_aux *aux, |
| const u8 *frame, |
| ssize_t len) |
| { |
| u8 avi_if[LSPCON_PARADE_AVI_IF_DATA_SIZE] = {1, }; |
| |
| /* |
| * Parade's frames contains 32 bytes of data, divided |
| * into 4 frames: |
| * Token byte (first byte of first frame, must be non-zero) |
| * HB0 to HB2 from AVI IF (3 bytes header) |
| * PB0 to PB27 from AVI IF (28 bytes data) |
| * So it should look like this |
| * first block: | <token> <HB0-HB2> <DB0-DB3> | |
| * next 3 blocks: |<DB4-DB11>|<DB12-DB19>|<DB20-DB28>| |
| */ |
| |
| if (len > LSPCON_PARADE_AVI_IF_DATA_SIZE - 1) { |
| DRM_ERROR("Invalid length of infoframes\n"); |
| return false; |
| } |
| |
| memcpy(&avi_if[1], frame, len); |
| |
| if (!_lspcon_parade_write_infoframe_blocks(aux, avi_if)) { |
| DRM_DEBUG_KMS("Failed to write infoframe blocks\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool _lspcon_write_avi_infoframe_mca(struct drm_dp_aux *aux, |
| const u8 *buffer, ssize_t len) |
| { |
| int ret; |
| u32 val = 0; |
| u32 retry; |
| u16 reg; |
| const u8 *data = buffer; |
| |
| reg = LSPCON_MCA_AVI_IF_WRITE_OFFSET; |
| while (val < len) { |
| /* DPCD write for AVI IF can fail on a slow FW day, so retry */ |
| for (retry = 0; retry < 5; retry++) { |
| ret = drm_dp_dpcd_write(aux, reg, (void *)data, 1); |
| if (ret == 1) { |
| break; |
| } else if (retry < 4) { |
| mdelay(50); |
| continue; |
| } else { |
| DRM_ERROR("DPCD write failed at:0x%x\n", reg); |
| return false; |
| } |
| } |
| val++; reg++; data++; |
| } |
| |
| val = 0; |
| reg = LSPCON_MCA_AVI_IF_CTRL; |
| ret = drm_dp_dpcd_read(aux, reg, &val, 1); |
| if (ret < 0) { |
| DRM_ERROR("DPCD read failed, address 0x%x\n", reg); |
| return false; |
| } |
| |
| /* Indicate LSPCON chip about infoframe, clear bit 1 and set bit 0 */ |
| val &= ~LSPCON_MCA_AVI_IF_HANDLED; |
| val |= LSPCON_MCA_AVI_IF_KICKOFF; |
| |
| ret = drm_dp_dpcd_write(aux, reg, &val, 1); |
| if (ret < 0) { |
| DRM_ERROR("DPCD read failed, address 0x%x\n", reg); |
| return false; |
| } |
| |
| val = 0; |
| ret = drm_dp_dpcd_read(aux, reg, &val, 1); |
| if (ret < 0) { |
| DRM_ERROR("DPCD read failed, address 0x%x\n", reg); |
| return false; |
| } |
| |
| if (val == LSPCON_MCA_AVI_IF_HANDLED) |
| DRM_DEBUG_KMS("AVI IF handled by FW\n"); |
| |
| return true; |
| } |
| |
| void lspcon_write_infoframe(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| unsigned int type, |
| const void *frame, ssize_t len) |
| { |
| bool ret; |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| struct intel_lspcon *lspcon = enc_to_intel_lspcon(&encoder->base); |
| |
| /* LSPCON only needs AVI IF */ |
| if (type != HDMI_INFOFRAME_TYPE_AVI) |
| return; |
| |
| if (lspcon->vendor == LSPCON_VENDOR_MCA) |
| ret = _lspcon_write_avi_infoframe_mca(&intel_dp->aux, |
| frame, len); |
| else |
| ret = _lspcon_write_avi_infoframe_parade(&intel_dp->aux, |
| frame, len); |
| |
| if (!ret) { |
| DRM_ERROR("Failed to write AVI infoframes\n"); |
| return; |
| } |
| |
| DRM_DEBUG_DRIVER("AVI infoframes updated successfully\n"); |
| } |
| |
| void lspcon_read_infoframe(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| unsigned int type, |
| void *frame, ssize_t len) |
| { |
| /* FIXME implement this */ |
| } |
| |
| void lspcon_set_infoframes(struct intel_encoder *encoder, |
| bool enable, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| ssize_t ret; |
| union hdmi_infoframe frame; |
| u8 buf[VIDEO_DIP_DATA_SIZE]; |
| struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); |
| struct intel_lspcon *lspcon = &dig_port->lspcon; |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->base.adjusted_mode; |
| |
| if (!lspcon->active) { |
| DRM_ERROR("Writing infoframes while LSPCON disabled ?\n"); |
| return; |
| } |
| |
| /* FIXME precompute infoframes */ |
| |
| ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, |
| conn_state->connector, |
| adjusted_mode); |
| if (ret < 0) { |
| DRM_ERROR("couldn't fill AVI infoframe\n"); |
| return; |
| } |
| |
| if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) { |
| if (crtc_state->lspcon_downsampling) |
| frame.avi.colorspace = HDMI_COLORSPACE_YUV420; |
| else |
| frame.avi.colorspace = HDMI_COLORSPACE_YUV444; |
| } else { |
| frame.avi.colorspace = HDMI_COLORSPACE_RGB; |
| } |
| |
| drm_hdmi_avi_infoframe_quant_range(&frame.avi, |
| conn_state->connector, |
| adjusted_mode, |
| crtc_state->limited_color_range ? |
| HDMI_QUANTIZATION_RANGE_LIMITED : |
| HDMI_QUANTIZATION_RANGE_FULL); |
| |
| ret = hdmi_infoframe_pack(&frame, buf, sizeof(buf)); |
| if (ret < 0) { |
| DRM_ERROR("Failed to pack AVI IF\n"); |
| return; |
| } |
| |
| dig_port->write_infoframe(encoder, crtc_state, HDMI_INFOFRAME_TYPE_AVI, |
| buf, ret); |
| } |
| |
| u32 lspcon_infoframes_enabled(struct intel_encoder *encoder, |
| const struct intel_crtc_state *pipe_config) |
| { |
| /* FIXME actually read this from the hw */ |
| return enc_to_intel_lspcon(&encoder->base)->active; |
| } |
| |
| void lspcon_resume(struct intel_lspcon *lspcon) |
| { |
| enum drm_lspcon_mode expected_mode; |
| |
| if (lspcon_wake_native_aux_ch(lspcon)) { |
| expected_mode = DRM_LSPCON_MODE_PCON; |
| lspcon_resume_in_pcon_wa(lspcon); |
| } else { |
| expected_mode = DRM_LSPCON_MODE_LS; |
| } |
| |
| if (lspcon_wait_mode(lspcon, expected_mode) == DRM_LSPCON_MODE_PCON) |
| return; |
| |
| if (lspcon_change_mode(lspcon, DRM_LSPCON_MODE_PCON)) |
| DRM_ERROR("LSPCON resume failed\n"); |
| else |
| DRM_DEBUG_KMS("LSPCON resume success\n"); |
| } |
| |
| void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon) |
| { |
| lspcon_wait_mode(lspcon, DRM_LSPCON_MODE_PCON); |
| } |
| |
| bool lspcon_init(struct intel_digital_port *intel_dig_port) |
| { |
| struct intel_dp *dp = &intel_dig_port->dp; |
| struct intel_lspcon *lspcon = &intel_dig_port->lspcon; |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct drm_connector *connector = &dp->attached_connector->base; |
| |
| if (!HAS_LSPCON(dev_priv)) { |
| DRM_ERROR("LSPCON is not supported on this platform\n"); |
| return false; |
| } |
| |
| lspcon->active = false; |
| lspcon->mode = DRM_LSPCON_MODE_INVALID; |
| |
| if (!lspcon_probe(lspcon)) { |
| DRM_ERROR("Failed to probe lspcon\n"); |
| return false; |
| } |
| |
| if (!intel_dp_read_dpcd(dp)) { |
| DRM_ERROR("LSPCON DPCD read failed\n"); |
| return false; |
| } |
| |
| if (!lspcon_detect_vendor(lspcon)) { |
| DRM_ERROR("LSPCON vendor detection failed\n"); |
| return false; |
| } |
| |
| connector->ycbcr_420_allowed = true; |
| lspcon->active = true; |
| DRM_DEBUG_KMS("Success: LSPCON init\n"); |
| return true; |
| } |