| #!/bin/bash |
| # SPDX-License-Identifier: GPL-2.0 |
| |
| [[ -z $TC ]] && TC='tc' |
| [[ -z $IP ]] && IP='ip' |
| |
| REDIRECT_USER='./tc_l2_redirect' |
| REDIRECT_BPF='./tc_l2_redirect_kern.o' |
| |
| RP_FILTER=$(< /proc/sys/net/ipv4/conf/all/rp_filter) |
| IPV6_FORWARDING=$(< /proc/sys/net/ipv6/conf/all/forwarding) |
| |
| function config_common { |
| local tun_type=$1 |
| |
| $IP netns add ns1 |
| $IP netns add ns2 |
| $IP link add ve1 type veth peer name vens1 |
| $IP link add ve2 type veth peer name vens2 |
| $IP link set dev ve1 up |
| $IP link set dev ve2 up |
| $IP link set dev ve1 mtu 1500 |
| $IP link set dev ve2 mtu 1500 |
| $IP link set dev vens1 netns ns1 |
| $IP link set dev vens2 netns ns2 |
| |
| $IP -n ns1 link set dev lo up |
| $IP -n ns1 link set dev vens1 up |
| $IP -n ns1 addr add 10.1.1.101/24 dev vens1 |
| $IP -n ns1 addr add 2401:db01::65/64 dev vens1 nodad |
| $IP -n ns1 route add default via 10.1.1.1 dev vens1 |
| $IP -n ns1 route add default via 2401:db01::1 dev vens1 |
| |
| $IP -n ns2 link set dev lo up |
| $IP -n ns2 link set dev vens2 up |
| $IP -n ns2 addr add 10.2.1.102/24 dev vens2 |
| $IP -n ns2 addr add 2401:db02::66/64 dev vens2 nodad |
| $IP -n ns2 addr add 10.10.1.102 dev lo |
| $IP -n ns2 addr add 2401:face::66/64 dev lo nodad |
| $IP -n ns2 link add ipt2 type ipip local 10.2.1.102 remote 10.2.1.1 |
| $IP -n ns2 link add ip6t2 type ip6tnl mode any local 2401:db02::66 remote 2401:db02::1 |
| $IP -n ns2 link set dev ipt2 up |
| $IP -n ns2 link set dev ip6t2 up |
| $IP netns exec ns2 $TC qdisc add dev vens2 clsact |
| $IP netns exec ns2 $TC filter add dev vens2 ingress bpf da obj $REDIRECT_BPF sec drop_non_tun_vip |
| if [[ $tun_type == "ipip" ]]; then |
| $IP -n ns2 route add 10.1.1.0/24 dev ipt2 |
| $IP netns exec ns2 sysctl -q -w net.ipv4.conf.all.rp_filter=0 |
| $IP netns exec ns2 sysctl -q -w net.ipv4.conf.ipt2.rp_filter=0 |
| else |
| $IP -n ns2 route add 10.1.1.0/24 dev ip6t2 |
| $IP -n ns2 route add 2401:db01::/64 dev ip6t2 |
| $IP netns exec ns2 sysctl -q -w net.ipv4.conf.all.rp_filter=0 |
| $IP netns exec ns2 sysctl -q -w net.ipv4.conf.ip6t2.rp_filter=0 |
| fi |
| |
| $IP addr add 10.1.1.1/24 dev ve1 |
| $IP addr add 2401:db01::1/64 dev ve1 nodad |
| $IP addr add 10.2.1.1/24 dev ve2 |
| $IP addr add 2401:db02::1/64 dev ve2 nodad |
| |
| $TC qdisc add dev ve2 clsact |
| $TC filter add dev ve2 ingress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_forward |
| |
| sysctl -q -w net.ipv4.conf.all.rp_filter=0 |
| sysctl -q -w net.ipv6.conf.all.forwarding=1 |
| } |
| |
| function cleanup { |
| set +e |
| [[ -z $DEBUG ]] || set +x |
| $IP netns delete ns1 >& /dev/null |
| $IP netns delete ns2 >& /dev/null |
| $IP link del ve1 >& /dev/null |
| $IP link del ve2 >& /dev/null |
| $IP link del ipt >& /dev/null |
| $IP link del ip6t >& /dev/null |
| sysctl -q -w net.ipv4.conf.all.rp_filter=$RP_FILTER |
| sysctl -q -w net.ipv6.conf.all.forwarding=$IPV6_FORWARDING |
| rm -f /sys/fs/bpf/tc/globals/tun_iface |
| [[ -z $DEBUG ]] || set -x |
| set -e |
| } |
| |
| function l2_to_ipip { |
| echo -n "l2_to_ipip $1: " |
| |
| local dir=$1 |
| |
| config_common ipip |
| |
| $IP link add ipt type ipip external |
| $IP link set dev ipt up |
| sysctl -q -w net.ipv4.conf.ipt.rp_filter=0 |
| sysctl -q -w net.ipv4.conf.ipt.forwarding=1 |
| |
| if [[ $dir == "egress" ]]; then |
| $IP route add 10.10.1.0/24 via 10.2.1.102 dev ve2 |
| $TC filter add dev ve2 egress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_redirect |
| sysctl -q -w net.ipv4.conf.ve1.forwarding=1 |
| else |
| $TC qdisc add dev ve1 clsact |
| $TC filter add dev ve1 ingress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_redirect |
| fi |
| |
| $REDIRECT_USER -U /sys/fs/bpf/tc/globals/tun_iface -i $(< /sys/class/net/ipt/ifindex) |
| |
| $IP netns exec ns1 ping -c1 10.10.1.102 >& /dev/null |
| |
| if [[ $dir == "egress" ]]; then |
| # test direct egress to ve2 (i.e. not forwarding from |
| # ve1 to ve2). |
| ping -c1 10.10.1.102 >& /dev/null |
| fi |
| |
| cleanup |
| |
| echo "OK" |
| } |
| |
| function l2_to_ip6tnl { |
| echo -n "l2_to_ip6tnl $1: " |
| |
| local dir=$1 |
| |
| config_common ip6tnl |
| |
| $IP link add ip6t type ip6tnl mode any external |
| $IP link set dev ip6t up |
| sysctl -q -w net.ipv4.conf.ip6t.rp_filter=0 |
| sysctl -q -w net.ipv4.conf.ip6t.forwarding=1 |
| |
| if [[ $dir == "egress" ]]; then |
| $IP route add 10.10.1.0/24 via 10.2.1.102 dev ve2 |
| $IP route add 2401:face::/64 via 2401:db02::66 dev ve2 |
| $TC filter add dev ve2 egress bpf da obj $REDIRECT_BPF sec l2_to_ip6tun_ingress_redirect |
| sysctl -q -w net.ipv4.conf.ve1.forwarding=1 |
| else |
| $TC qdisc add dev ve1 clsact |
| $TC filter add dev ve1 ingress bpf da obj $REDIRECT_BPF sec l2_to_ip6tun_ingress_redirect |
| fi |
| |
| $REDIRECT_USER -U /sys/fs/bpf/tc/globals/tun_iface -i $(< /sys/class/net/ip6t/ifindex) |
| |
| $IP netns exec ns1 ping -c1 10.10.1.102 >& /dev/null |
| $IP netns exec ns1 ping -6 -c1 2401:face::66 >& /dev/null |
| |
| if [[ $dir == "egress" ]]; then |
| # test direct egress to ve2 (i.e. not forwarding from |
| # ve1 to ve2). |
| ping -c1 10.10.1.102 >& /dev/null |
| ping -6 -c1 2401:face::66 >& /dev/null |
| fi |
| |
| cleanup |
| |
| echo "OK" |
| } |
| |
| cleanup |
| test_names="l2_to_ipip l2_to_ip6tnl" |
| test_dirs="ingress egress" |
| if [[ $# -ge 2 ]]; then |
| test_names=$1 |
| test_dirs=$2 |
| elif [[ $# -ge 1 ]]; then |
| test_names=$1 |
| fi |
| |
| for t in $test_names; do |
| for d in $test_dirs; do |
| $t $d |
| done |
| done |