| /* |
| * Copyright 2015 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include "smumgr.h" |
| #include "smu74.h" |
| #include "smu_ucode_xfer_vi.h" |
| #include "polaris10_smumgr.h" |
| #include "smu74_discrete.h" |
| #include "smu/smu_7_1_3_d.h" |
| #include "smu/smu_7_1_3_sh_mask.h" |
| #include "gmc/gmc_8_1_d.h" |
| #include "gmc/gmc_8_1_sh_mask.h" |
| #include "oss/oss_3_0_d.h" |
| #include "gca/gfx_8_0_d.h" |
| #include "bif/bif_5_0_d.h" |
| #include "bif/bif_5_0_sh_mask.h" |
| #include "polaris10_pwrvirus.h" |
| #include "ppatomctrl.h" |
| #include "pp_debug.h" |
| #include "cgs_common.h" |
| |
| #define POLARIS10_SMC_SIZE 0x20000 |
| #define VOLTAGE_SCALE 4 |
| |
| /* Microcode file is stored in this buffer */ |
| #define BUFFER_SIZE 80000 |
| #define MAX_STRING_SIZE 15 |
| #define BUFFER_SIZETWO 131072 /* 128 *1024 */ |
| |
| #define SMC_RAM_END 0x40000 |
| |
| static const SMU74_Discrete_GraphicsLevel avfs_graphics_level_polaris10[8] = { |
| /* Min pcie DeepSleep Activity CgSpll CgSpll CcPwr CcPwr Sclk Enabled Enabled Voltage Power */ |
| /* Voltage, DpmLevel, DivId, Level, FuncCntl3, FuncCntl4, DynRm, DynRm1 Did, Padding,ForActivity, ForThrottle, UpHyst, DownHyst, DownHyst, Throttle */ |
| { 0x100ea446, 0x00, 0x03, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x30750000, 0x3000, 0, 0x2600, 0, 0, 0x0004, 0x8f02, 0xffff, 0x2f00, 0x300e, 0x2700 } }, |
| { 0x400ea446, 0x01, 0x04, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x409c0000, 0x2000, 0, 0x1e00, 1, 1, 0x0004, 0x8300, 0xffff, 0x1f00, 0xcb5e, 0x1a00 } }, |
| { 0x740ea446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x50c30000, 0x2800, 0, 0x2000, 1, 1, 0x0004, 0x0c02, 0xffff, 0x2700, 0x6433, 0x2100 } }, |
| { 0xa40ea446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x60ea0000, 0x3000, 0, 0x2600, 1, 1, 0x0004, 0x8f02, 0xffff, 0x2f00, 0x300e, 0x2700 } }, |
| { 0xd80ea446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x70110100, 0x3800, 0, 0x2c00, 1, 1, 0x0004, 0x1203, 0xffff, 0x3600, 0xc9e2, 0x2e00 } }, |
| { 0x3c0fa446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x80380100, 0x2000, 0, 0x1e00, 2, 1, 0x0004, 0x8300, 0xffff, 0x1f00, 0xcb5e, 0x1a00 } }, |
| { 0x6c0fa446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x905f0100, 0x2400, 0, 0x1e00, 2, 1, 0x0004, 0x8901, 0xffff, 0x2300, 0x314c, 0x1d00 } }, |
| { 0xa00fa446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0xa0860100, 0x2800, 0, 0x2000, 2, 1, 0x0004, 0x0c02, 0xffff, 0x2700, 0x6433, 0x2100 } } |
| }; |
| |
| static const SMU74_Discrete_MemoryLevel avfs_memory_level_polaris10 = |
| {0x100ea446, 0, 0x30750000, 0x01, 0x01, 0x01, 0x00, 0x00, 0x64, 0x00, 0x00, 0x1f00, 0x00, 0x00}; |
| |
| /** |
| * Set the address for reading/writing the SMC SRAM space. |
| * @param smumgr the address of the powerplay hardware manager. |
| * @param smcAddress the address in the SMC RAM to access. |
| */ |
| static int polaris10_set_smc_sram_address(struct pp_smumgr *smumgr, uint32_t smc_addr, uint32_t limit) |
| { |
| PP_ASSERT_WITH_CODE((0 == (3 & smc_addr)), "SMC address must be 4 byte aligned.", return -EINVAL); |
| PP_ASSERT_WITH_CODE((limit > (smc_addr + 3)), "SMC addr is beyond the SMC RAM area.", return -EINVAL); |
| |
| cgs_write_register(smumgr->device, mmSMC_IND_INDEX_11, smc_addr); |
| SMUM_WRITE_FIELD(smumgr->device, SMC_IND_ACCESS_CNTL, AUTO_INCREMENT_IND_11, 0); |
| |
| return 0; |
| } |
| |
| /** |
| * Copy bytes from SMC RAM space into driver memory. |
| * |
| * @param smumgr the address of the powerplay SMU manager. |
| * @param smc_start_address the start address in the SMC RAM to copy bytes from |
| * @param src the byte array to copy the bytes to. |
| * @param byte_count the number of bytes to copy. |
| */ |
| int polaris10_copy_bytes_from_smc(struct pp_smumgr *smumgr, uint32_t smc_start_address, uint32_t *dest, uint32_t byte_count, uint32_t limit) |
| { |
| uint32_t data; |
| uint32_t addr; |
| uint8_t *dest_byte; |
| uint8_t i, data_byte[4] = {0}; |
| uint32_t *pdata = (uint32_t *)&data_byte; |
| |
| PP_ASSERT_WITH_CODE((0 == (3 & smc_start_address)), "SMC address must be 4 byte aligned.", return -1;); |
| PP_ASSERT_WITH_CODE((limit > (smc_start_address + byte_count)), "SMC address is beyond the SMC RAM area.", return -1); |
| |
| addr = smc_start_address; |
| |
| while (byte_count >= 4) { |
| polaris10_read_smc_sram_dword(smumgr, addr, &data, limit); |
| |
| *dest = PP_SMC_TO_HOST_UL(data); |
| |
| dest += 1; |
| byte_count -= 4; |
| addr += 4; |
| } |
| |
| if (byte_count) { |
| polaris10_read_smc_sram_dword(smumgr, addr, &data, limit); |
| *pdata = PP_SMC_TO_HOST_UL(data); |
| /* Cast dest into byte type in dest_byte. This way, we don't overflow if the allocated memory is not 4-byte aligned. */ |
| dest_byte = (uint8_t *)dest; |
| for (i = 0; i < byte_count; i++) |
| dest_byte[i] = data_byte[i]; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Copy bytes from an array into the SMC RAM space. |
| * |
| * @param pSmuMgr the address of the powerplay SMU manager. |
| * @param smc_start_address the start address in the SMC RAM to copy bytes to. |
| * @param src the byte array to copy the bytes from. |
| * @param byte_count the number of bytes to copy. |
| */ |
| int polaris10_copy_bytes_to_smc(struct pp_smumgr *smumgr, uint32_t smc_start_address, |
| const uint8_t *src, uint32_t byte_count, uint32_t limit) |
| { |
| int result; |
| uint32_t data = 0; |
| uint32_t original_data; |
| uint32_t addr = 0; |
| uint32_t extra_shift; |
| |
| PP_ASSERT_WITH_CODE((0 == (3 & smc_start_address)), "SMC address must be 4 byte aligned.", return -1); |
| PP_ASSERT_WITH_CODE((limit > (smc_start_address + byte_count)), "SMC address is beyond the SMC RAM area.", return -1); |
| |
| addr = smc_start_address; |
| |
| while (byte_count >= 4) { |
| /* Bytes are written into the SMC addres space with the MSB first. */ |
| data = src[0] * 0x1000000 + src[1] * 0x10000 + src[2] * 0x100 + src[3]; |
| |
| result = polaris10_set_smc_sram_address(smumgr, addr, limit); |
| |
| if (0 != result) |
| return result; |
| |
| cgs_write_register(smumgr->device, mmSMC_IND_DATA_11, data); |
| |
| src += 4; |
| byte_count -= 4; |
| addr += 4; |
| } |
| |
| if (0 != byte_count) { |
| |
| data = 0; |
| |
| result = polaris10_set_smc_sram_address(smumgr, addr, limit); |
| |
| if (0 != result) |
| return result; |
| |
| |
| original_data = cgs_read_register(smumgr->device, mmSMC_IND_DATA_11); |
| |
| extra_shift = 8 * (4 - byte_count); |
| |
| while (byte_count > 0) { |
| /* Bytes are written into the SMC addres space with the MSB first. */ |
| data = (0x100 * data) + *src++; |
| byte_count--; |
| } |
| |
| data <<= extra_shift; |
| |
| data |= (original_data & ~((~0UL) << extra_shift)); |
| |
| result = polaris10_set_smc_sram_address(smumgr, addr, limit); |
| |
| if (0 != result) |
| return result; |
| |
| cgs_write_register(smumgr->device, mmSMC_IND_DATA_11, data); |
| } |
| |
| return 0; |
| } |
| |
| |
| static int polaris10_program_jump_on_start(struct pp_smumgr *smumgr) |
| { |
| static const unsigned char data[4] = { 0xE0, 0x00, 0x80, 0x40 }; |
| |
| polaris10_copy_bytes_to_smc(smumgr, 0x0, data, 4, sizeof(data)+1); |
| |
| return 0; |
| } |
| |
| /** |
| * Return if the SMC is currently running. |
| * |
| * @param smumgr the address of the powerplay hardware manager. |
| */ |
| bool polaris10_is_smc_ram_running(struct pp_smumgr *smumgr) |
| { |
| return ((0 == SMUM_READ_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, SMC_SYSCON_CLOCK_CNTL_0, ck_disable)) |
| && (0x20100 <= cgs_read_ind_register(smumgr->device, CGS_IND_REG__SMC, ixSMC_PC_C))); |
| } |
| |
| static bool polaris10_is_hw_avfs_present(struct pp_smumgr *smumgr) |
| { |
| uint32_t efuse; |
| |
| efuse = cgs_read_ind_register(smumgr->device, CGS_IND_REG__SMC, ixSMU_EFUSE_0 + (49*4)); |
| efuse &= 0x00000001; |
| if (efuse) |
| return true; |
| |
| return false; |
| } |
| |
| /** |
| * Send a message to the SMC, and wait for its response. |
| * |
| * @param smumgr the address of the powerplay hardware manager. |
| * @param msg the message to send. |
| * @return The response that came from the SMC. |
| */ |
| int polaris10_send_msg_to_smc(struct pp_smumgr *smumgr, uint16_t msg) |
| { |
| int ret; |
| |
| if (!polaris10_is_smc_ram_running(smumgr)) |
| return -1; |
| |
| |
| SMUM_WAIT_FIELD_UNEQUAL(smumgr, SMC_RESP_0, SMC_RESP, 0); |
| |
| ret = SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP); |
| |
| if (ret != 1) |
| printk("\n failed to send pre message %x ret is %d \n", msg, ret); |
| |
| cgs_write_register(smumgr->device, mmSMC_MESSAGE_0, msg); |
| |
| SMUM_WAIT_FIELD_UNEQUAL(smumgr, SMC_RESP_0, SMC_RESP, 0); |
| |
| ret = SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP); |
| |
| if (ret != 1) |
| printk("\n failed to send message %x ret is %d \n", msg, ret); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * Send a message to the SMC, and do not wait for its response. |
| * |
| * @param smumgr the address of the powerplay hardware manager. |
| * @param msg the message to send. |
| * @return Always return 0. |
| */ |
| int polaris10_send_msg_to_smc_without_waiting(struct pp_smumgr *smumgr, uint16_t msg) |
| { |
| cgs_write_register(smumgr->device, mmSMC_MESSAGE_0, msg); |
| |
| return 0; |
| } |
| |
| /** |
| * Send a message to the SMC with parameter |
| * |
| * @param smumgr: the address of the powerplay hardware manager. |
| * @param msg: the message to send. |
| * @param parameter: the parameter to send |
| * @return The response that came from the SMC. |
| */ |
| int polaris10_send_msg_to_smc_with_parameter(struct pp_smumgr *smumgr, uint16_t msg, uint32_t parameter) |
| { |
| if (!polaris10_is_smc_ram_running(smumgr)) { |
| return -1; |
| } |
| |
| SMUM_WAIT_FIELD_UNEQUAL(smumgr, SMC_RESP_0, SMC_RESP, 0); |
| |
| cgs_write_register(smumgr->device, mmSMC_MSG_ARG_0, parameter); |
| |
| return polaris10_send_msg_to_smc(smumgr, msg); |
| } |
| |
| |
| /** |
| * Send a message to the SMC with parameter, do not wait for response |
| * |
| * @param smumgr: the address of the powerplay hardware manager. |
| * @param msg: the message to send. |
| * @param parameter: the parameter to send |
| * @return The response that came from the SMC. |
| */ |
| int polaris10_send_msg_to_smc_with_parameter_without_waiting(struct pp_smumgr *smumgr, uint16_t msg, uint32_t parameter) |
| { |
| cgs_write_register(smumgr->device, mmSMC_MSG_ARG_0, parameter); |
| |
| return polaris10_send_msg_to_smc_without_waiting(smumgr, msg); |
| } |
| |
| int polaris10_send_msg_to_smc_offset(struct pp_smumgr *smumgr) |
| { |
| cgs_write_register(smumgr->device, mmSMC_MSG_ARG_0, 0x20000); |
| |
| cgs_write_register(smumgr->device, mmSMC_MESSAGE_0, PPSMC_MSG_Test); |
| |
| SMUM_WAIT_FIELD_UNEQUAL(smumgr, SMC_RESP_0, SMC_RESP, 0); |
| |
| if (1 != SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP)) |
| printk("Failed to send Message.\n"); |
| |
| return 0; |
| } |
| |
| /** |
| * Wait until the SMC is doing nithing. Doing nothing means that the SMC is either turned off or it is sitting on the STOP instruction. |
| * |
| * @param smumgr the address of the powerplay hardware manager. |
| * @param msg the message to send. |
| * @return The response that came from the SMC. |
| */ |
| int polaris10_wait_for_smc_inactive(struct pp_smumgr *smumgr) |
| { |
| /* If the SMC is not even on it qualifies as inactive. */ |
| if (!polaris10_is_smc_ram_running(smumgr)) |
| return -1; |
| |
| SMUM_WAIT_VFPF_INDIRECT_FIELD(smumgr, SMC_IND, SMC_SYSCON_CLOCK_CNTL_0, cken, 0); |
| return 0; |
| } |
| |
| |
| /** |
| * Upload the SMC firmware to the SMC microcontroller. |
| * |
| * @param smumgr the address of the powerplay hardware manager. |
| * @param pFirmware the data structure containing the various sections of the firmware. |
| */ |
| static int polaris10_upload_smc_firmware_data(struct pp_smumgr *smumgr, uint32_t length, uint32_t *src, uint32_t limit) |
| { |
| uint32_t byte_count = length; |
| |
| PP_ASSERT_WITH_CODE((limit >= byte_count), "SMC address is beyond the SMC RAM area.", return -1); |
| |
| cgs_write_register(smumgr->device, mmSMC_IND_INDEX_11, 0x20000); |
| SMUM_WRITE_FIELD(smumgr->device, SMC_IND_ACCESS_CNTL, AUTO_INCREMENT_IND_11, 1); |
| |
| for (; byte_count >= 4; byte_count -= 4) |
| cgs_write_register(smumgr->device, mmSMC_IND_DATA_11, *src++); |
| |
| SMUM_WRITE_FIELD(smumgr->device, SMC_IND_ACCESS_CNTL, AUTO_INCREMENT_IND_11, 0); |
| |
| PP_ASSERT_WITH_CODE((0 == byte_count), "SMC size must be dividable by 4.", return -1); |
| |
| return 0; |
| } |
| |
| static enum cgs_ucode_id polaris10_convert_fw_type_to_cgs(uint32_t fw_type) |
| { |
| enum cgs_ucode_id result = CGS_UCODE_ID_MAXIMUM; |
| |
| switch (fw_type) { |
| case UCODE_ID_SMU: |
| result = CGS_UCODE_ID_SMU; |
| break; |
| case UCODE_ID_SMU_SK: |
| result = CGS_UCODE_ID_SMU_SK; |
| break; |
| case UCODE_ID_SDMA0: |
| result = CGS_UCODE_ID_SDMA0; |
| break; |
| case UCODE_ID_SDMA1: |
| result = CGS_UCODE_ID_SDMA1; |
| break; |
| case UCODE_ID_CP_CE: |
| result = CGS_UCODE_ID_CP_CE; |
| break; |
| case UCODE_ID_CP_PFP: |
| result = CGS_UCODE_ID_CP_PFP; |
| break; |
| case UCODE_ID_CP_ME: |
| result = CGS_UCODE_ID_CP_ME; |
| break; |
| case UCODE_ID_CP_MEC: |
| result = CGS_UCODE_ID_CP_MEC; |
| break; |
| case UCODE_ID_CP_MEC_JT1: |
| result = CGS_UCODE_ID_CP_MEC_JT1; |
| break; |
| case UCODE_ID_CP_MEC_JT2: |
| result = CGS_UCODE_ID_CP_MEC_JT2; |
| break; |
| case UCODE_ID_RLC_G: |
| result = CGS_UCODE_ID_RLC_G; |
| break; |
| default: |
| break; |
| } |
| |
| return result; |
| } |
| |
| static int polaris10_upload_smu_firmware_image(struct pp_smumgr *smumgr) |
| { |
| int result = 0; |
| struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(smumgr->backend); |
| |
| struct cgs_firmware_info info = {0}; |
| |
| if (smu_data->security_hard_key == 1) |
| cgs_get_firmware_info(smumgr->device, |
| polaris10_convert_fw_type_to_cgs(UCODE_ID_SMU), &info); |
| else |
| cgs_get_firmware_info(smumgr->device, |
| polaris10_convert_fw_type_to_cgs(UCODE_ID_SMU_SK), &info); |
| |
| /* TO DO cgs_init_samu_load_smu(smumgr->device, (uint32_t *)info.kptr, info.image_size, smu_data->post_initial_boot);*/ |
| result = polaris10_upload_smc_firmware_data(smumgr, info.image_size, (uint32_t *)info.kptr, POLARIS10_SMC_SIZE); |
| |
| return result; |
| } |
| |
| /** |
| * Read a 32bit value from the SMC SRAM space. |
| * ALL PARAMETERS ARE IN HOST BYTE ORDER. |
| * @param smumgr the address of the powerplay hardware manager. |
| * @param smcAddress the address in the SMC RAM to access. |
| * @param value and output parameter for the data read from the SMC SRAM. |
| */ |
| int polaris10_read_smc_sram_dword(struct pp_smumgr *smumgr, uint32_t smc_addr, uint32_t *value, uint32_t limit) |
| { |
| int result; |
| |
| result = polaris10_set_smc_sram_address(smumgr, smc_addr, limit); |
| |
| if (result) |
| return result; |
| |
| *value = cgs_read_register(smumgr->device, mmSMC_IND_DATA_11); |
| return 0; |
| } |
| |
| /** |
| * Write a 32bit value to the SMC SRAM space. |
| * ALL PARAMETERS ARE IN HOST BYTE ORDER. |
| * @param smumgr the address of the powerplay hardware manager. |
| * @param smc_addr the address in the SMC RAM to access. |
| * @param value to write to the SMC SRAM. |
| */ |
| int polaris10_write_smc_sram_dword(struct pp_smumgr *smumgr, uint32_t smc_addr, uint32_t value, uint32_t limit) |
| { |
| int result; |
| |
| result = polaris10_set_smc_sram_address(smumgr, smc_addr, limit); |
| |
| if (result) |
| return result; |
| |
| cgs_write_register(smumgr->device, mmSMC_IND_DATA_11, value); |
| |
| return 0; |
| } |
| |
| |
| int polaris10_smu_fini(struct pp_smumgr *smumgr) |
| { |
| if (smumgr->backend) { |
| kfree(smumgr->backend); |
| smumgr->backend = NULL; |
| } |
| cgs_rel_firmware(smumgr->device, CGS_UCODE_ID_SMU); |
| return 0; |
| } |
| |
| /* Convert the firmware type to SMU type mask. For MEC, we need to check all MEC related type */ |
| static uint32_t polaris10_get_mask_for_firmware_type(uint32_t fw_type) |
| { |
| uint32_t result = 0; |
| |
| switch (fw_type) { |
| case UCODE_ID_SDMA0: |
| result = UCODE_ID_SDMA0_MASK; |
| break; |
| case UCODE_ID_SDMA1: |
| result = UCODE_ID_SDMA1_MASK; |
| break; |
| case UCODE_ID_CP_CE: |
| result = UCODE_ID_CP_CE_MASK; |
| break; |
| case UCODE_ID_CP_PFP: |
| result = UCODE_ID_CP_PFP_MASK; |
| break; |
| case UCODE_ID_CP_ME: |
| result = UCODE_ID_CP_ME_MASK; |
| break; |
| case UCODE_ID_CP_MEC_JT1: |
| case UCODE_ID_CP_MEC_JT2: |
| result = UCODE_ID_CP_MEC_MASK; |
| break; |
| case UCODE_ID_RLC_G: |
| result = UCODE_ID_RLC_G_MASK; |
| break; |
| default: |
| printk("UCode type is out of range! \n"); |
| result = 0; |
| } |
| |
| return result; |
| } |
| |
| /* Populate one firmware image to the data structure */ |
| |
| static int polaris10_populate_single_firmware_entry(struct pp_smumgr *smumgr, |
| uint32_t fw_type, |
| struct SMU_Entry *entry) |
| { |
| int result = 0; |
| struct cgs_firmware_info info = {0}; |
| |
| result = cgs_get_firmware_info(smumgr->device, |
| polaris10_convert_fw_type_to_cgs(fw_type), |
| &info); |
| |
| if (!result) { |
| entry->version = info.version; |
| entry->id = (uint16_t)fw_type; |
| entry->image_addr_high = smu_upper_32_bits(info.mc_addr); |
| entry->image_addr_low = smu_lower_32_bits(info.mc_addr); |
| entry->meta_data_addr_high = 0; |
| entry->meta_data_addr_low = 0; |
| entry->data_size_byte = info.image_size; |
| entry->num_register_entries = 0; |
| } |
| |
| if (fw_type == UCODE_ID_RLC_G) |
| entry->flags = 1; |
| else |
| entry->flags = 0; |
| |
| return 0; |
| } |
| |
| static int polaris10_request_smu_load_fw(struct pp_smumgr *smumgr) |
| { |
| struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(smumgr->backend); |
| uint32_t fw_to_load; |
| |
| int result = 0; |
| struct SMU_DRAMData_TOC *toc; |
| |
| if (!smumgr->reload_fw) { |
| printk(KERN_INFO "[ powerplay ] skip reloading...\n"); |
| return 0; |
| } |
| |
| if (smu_data->soft_regs_start) |
| cgs_write_ind_register(smumgr->device, CGS_IND_REG__SMC, |
| smu_data->soft_regs_start + offsetof(SMU74_SoftRegisters, UcodeLoadStatus), |
| 0x0); |
| |
| polaris10_send_msg_to_smc_with_parameter(smumgr, PPSMC_MSG_SMU_DRAM_ADDR_HI, smu_data->smu_buffer.mc_addr_high); |
| polaris10_send_msg_to_smc_with_parameter(smumgr, PPSMC_MSG_SMU_DRAM_ADDR_LO, smu_data->smu_buffer.mc_addr_low); |
| |
| toc = (struct SMU_DRAMData_TOC *)smu_data->header; |
| toc->num_entries = 0; |
| toc->structure_version = 1; |
| |
| PP_ASSERT_WITH_CODE(0 == polaris10_populate_single_firmware_entry(smumgr, UCODE_ID_RLC_G, &toc->entry[toc->num_entries++]), "Failed to Get Firmware Entry.", return -1); |
| PP_ASSERT_WITH_CODE(0 == polaris10_populate_single_firmware_entry(smumgr, UCODE_ID_CP_CE, &toc->entry[toc->num_entries++]), "Failed to Get Firmware Entry.", return -1); |
| PP_ASSERT_WITH_CODE(0 == polaris10_populate_single_firmware_entry(smumgr, UCODE_ID_CP_PFP, &toc->entry[toc->num_entries++]), "Failed to Get Firmware Entry.", return -1); |
| PP_ASSERT_WITH_CODE(0 == polaris10_populate_single_firmware_entry(smumgr, UCODE_ID_CP_ME, &toc->entry[toc->num_entries++]), "Failed to Get Firmware Entry.", return -1); |
| PP_ASSERT_WITH_CODE(0 == polaris10_populate_single_firmware_entry(smumgr, UCODE_ID_CP_MEC, &toc->entry[toc->num_entries++]), "Failed to Get Firmware Entry.", return -1); |
| PP_ASSERT_WITH_CODE(0 == polaris10_populate_single_firmware_entry(smumgr, UCODE_ID_CP_MEC_JT1, &toc->entry[toc->num_entries++]), "Failed to Get Firmware Entry.", return -1); |
| PP_ASSERT_WITH_CODE(0 == polaris10_populate_single_firmware_entry(smumgr, UCODE_ID_CP_MEC_JT2, &toc->entry[toc->num_entries++]), "Failed to Get Firmware Entry.", return -1); |
| PP_ASSERT_WITH_CODE(0 == polaris10_populate_single_firmware_entry(smumgr, UCODE_ID_SDMA0, &toc->entry[toc->num_entries++]), "Failed to Get Firmware Entry.", return -1); |
| PP_ASSERT_WITH_CODE(0 == polaris10_populate_single_firmware_entry(smumgr, UCODE_ID_SDMA1, &toc->entry[toc->num_entries++]), "Failed to Get Firmware Entry.", return -1); |
| |
| polaris10_send_msg_to_smc_with_parameter(smumgr, PPSMC_MSG_DRV_DRAM_ADDR_HI, smu_data->header_buffer.mc_addr_high); |
| polaris10_send_msg_to_smc_with_parameter(smumgr, PPSMC_MSG_DRV_DRAM_ADDR_LO, smu_data->header_buffer.mc_addr_low); |
| |
| fw_to_load = UCODE_ID_RLC_G_MASK |
| + UCODE_ID_SDMA0_MASK |
| + UCODE_ID_SDMA1_MASK |
| + UCODE_ID_CP_CE_MASK |
| + UCODE_ID_CP_ME_MASK |
| + UCODE_ID_CP_PFP_MASK |
| + UCODE_ID_CP_MEC_MASK; |
| |
| if (polaris10_send_msg_to_smc_with_parameter(smumgr, PPSMC_MSG_LoadUcodes, fw_to_load)) |
| printk(KERN_ERR "Fail to Request SMU Load uCode"); |
| |
| return result; |
| } |
| |
| /* Check if the FW has been loaded, SMU will not return if loading has not finished. */ |
| static int polaris10_check_fw_load_finish(struct pp_smumgr *smumgr, uint32_t fw_type) |
| { |
| struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(smumgr->backend); |
| uint32_t fw_mask = polaris10_get_mask_for_firmware_type(fw_type); |
| uint32_t ret; |
| /* Check SOFT_REGISTERS_TABLE_28.UcodeLoadStatus */ |
| ret = smum_wait_on_indirect_register(smumgr, mmSMC_IND_INDEX_11, |
| smu_data->soft_regs_start + offsetof(SMU74_SoftRegisters, UcodeLoadStatus), |
| fw_mask, fw_mask); |
| |
| return ret; |
| } |
| |
| static int polaris10_reload_firmware(struct pp_smumgr *smumgr) |
| { |
| return smumgr->smumgr_funcs->start_smu(smumgr); |
| } |
| |
| static int polaris10_setup_pwr_virus(struct pp_smumgr *smumgr) |
| { |
| int i; |
| int result = -1; |
| uint32_t reg, data; |
| |
| const PWR_Command_Table *pvirus = pwr_virus_table; |
| struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(smumgr->backend); |
| |
| |
| for (i = 0; i < PWR_VIRUS_TABLE_SIZE; i++) { |
| switch (pvirus->command) { |
| case PwrCmdWrite: |
| reg = pvirus->reg; |
| data = pvirus->data; |
| cgs_write_register(smumgr->device, reg, data); |
| break; |
| |
| case PwrCmdEnd: |
| result = 0; |
| break; |
| |
| default: |
| printk("Table Exit with Invalid Command!"); |
| smu_data->avfs.avfs_btc_status = AVFS_BTC_VIRUS_FAIL; |
| result = -1; |
| break; |
| } |
| pvirus++; |
| } |
| |
| return result; |
| } |
| |
| static int polaris10_perform_btc(struct pp_smumgr *smumgr) |
| { |
| int result = 0; |
| struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(smumgr->backend); |
| |
| if (0 != smu_data->avfs.avfs_btc_param) { |
| if (0 != polaris10_send_msg_to_smc_with_parameter(smumgr, PPSMC_MSG_PerformBtc, smu_data->avfs.avfs_btc_param)) { |
| printk("[AVFS][SmuPolaris10_PerformBtc] PerformBTC SMU msg failed"); |
| result = -1; |
| } |
| } |
| if (smu_data->avfs.avfs_btc_param > 1) { |
| /* Soft-Reset to reset the engine before loading uCode */ |
| /* halt */ |
| cgs_write_register(smumgr->device, mmCP_MEC_CNTL, 0x50000000); |
| /* reset everything */ |
| cgs_write_register(smumgr->device, mmGRBM_SOFT_RESET, 0xffffffff); |
| cgs_write_register(smumgr->device, mmGRBM_SOFT_RESET, 0); |
| } |
| return result; |
| } |
| |
| |
| int polaris10_setup_graphics_level_structure(struct pp_smumgr *smumgr) |
| { |
| uint32_t vr_config; |
| uint32_t dpm_table_start; |
| |
| uint16_t u16_boot_mvdd; |
| uint32_t graphics_level_address, vr_config_address, graphics_level_size; |
| |
| graphics_level_size = sizeof(avfs_graphics_level_polaris10); |
| u16_boot_mvdd = PP_HOST_TO_SMC_US(1300 * VOLTAGE_SCALE); |
| |
| PP_ASSERT_WITH_CODE(0 == polaris10_read_smc_sram_dword(smumgr, |
| SMU7_FIRMWARE_HEADER_LOCATION + offsetof(SMU74_Firmware_Header, DpmTable), |
| &dpm_table_start, 0x40000), |
| "[AVFS][Polaris10_SetupGfxLvlStruct] SMU could not communicate starting address of DPM table", |
| return -1); |
| |
| /* Default value for VRConfig = VR_MERGED_WITH_VDDC + VR_STATIC_VOLTAGE(VDDCI) */ |
| vr_config = 0x01000500; /* Real value:0x50001 */ |
| |
| vr_config_address = dpm_table_start + offsetof(SMU74_Discrete_DpmTable, VRConfig); |
| |
| PP_ASSERT_WITH_CODE(0 == polaris10_copy_bytes_to_smc(smumgr, vr_config_address, |
| (uint8_t *)&vr_config, sizeof(uint32_t), 0x40000), |
| "[AVFS][Polaris10_SetupGfxLvlStruct] Problems copying VRConfig value over to SMC", |
| return -1); |
| |
| graphics_level_address = dpm_table_start + offsetof(SMU74_Discrete_DpmTable, GraphicsLevel); |
| |
| PP_ASSERT_WITH_CODE(0 == polaris10_copy_bytes_to_smc(smumgr, graphics_level_address, |
| (uint8_t *)(&avfs_graphics_level_polaris10), |
| graphics_level_size, 0x40000), |
| "[AVFS][Polaris10_SetupGfxLvlStruct] Copying of SCLK DPM table failed!", |
| return -1); |
| |
| graphics_level_address = dpm_table_start + offsetof(SMU74_Discrete_DpmTable, MemoryLevel); |
| |
| PP_ASSERT_WITH_CODE(0 == polaris10_copy_bytes_to_smc(smumgr, graphics_level_address, |
| (uint8_t *)(&avfs_memory_level_polaris10), sizeof(avfs_memory_level_polaris10), 0x40000), |
| "[AVFS][Polaris10_SetupGfxLvlStruct] Copying of MCLK DPM table failed!", |
| return -1); |
| |
| /* MVDD Boot value - neccessary for getting rid of the hang that occurs during Mclk DPM enablement */ |
| |
| graphics_level_address = dpm_table_start + offsetof(SMU74_Discrete_DpmTable, BootMVdd); |
| |
| PP_ASSERT_WITH_CODE(0 == polaris10_copy_bytes_to_smc(smumgr, graphics_level_address, |
| (uint8_t *)(&u16_boot_mvdd), sizeof(u16_boot_mvdd), 0x40000), |
| "[AVFS][Polaris10_SetupGfxLvlStruct] Copying of DPM table failed!", |
| return -1); |
| |
| return 0; |
| } |
| |
| int polaris10_avfs_event_mgr(struct pp_smumgr *smumgr, bool SMU_VFT_INTACT) |
| { |
| struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(smumgr->backend); |
| |
| switch (smu_data->avfs.avfs_btc_status) { |
| case AVFS_BTC_COMPLETED_PREVIOUSLY: |
| break; |
| |
| case AVFS_BTC_BOOT: /* Cold Boot State - Post SMU Start */ |
| |
| smu_data->avfs.avfs_btc_status = AVFS_BTC_DPMTABLESETUP_FAILED; |
| PP_ASSERT_WITH_CODE(0 == polaris10_setup_graphics_level_structure(smumgr), |
| "[AVFS][Polaris10_AVFSEventMgr] Could not Copy Graphics Level table over to SMU", |
| return -1); |
| |
| if (smu_data->avfs.avfs_btc_param > 1) { |
| printk("[AVFS][Polaris10_AVFSEventMgr] AC BTC has not been successfully verified on Fiji. There may be in this setting."); |
| smu_data->avfs.avfs_btc_status = AVFS_BTC_VIRUS_FAIL; |
| PP_ASSERT_WITH_CODE(-1 == polaris10_setup_pwr_virus(smumgr), |
| "[AVFS][Polaris10_AVFSEventMgr] Could not setup Pwr Virus for AVFS ", |
| return -1); |
| } |
| |
| smu_data->avfs.avfs_btc_status = AVFS_BTC_FAILED; |
| PP_ASSERT_WITH_CODE(0 == polaris10_perform_btc(smumgr), |
| "[AVFS][Polaris10_AVFSEventMgr] Failure at SmuPolaris10_PerformBTC. AVFS Disabled", |
| return -1); |
| |
| break; |
| |
| case AVFS_BTC_DISABLED: |
| case AVFS_BTC_NOTSUPPORTED: |
| break; |
| |
| default: |
| printk("[AVFS] Something is broken. See log!"); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int polaris10_start_smu_in_protection_mode(struct pp_smumgr *smumgr) |
| { |
| int result = 0; |
| |
| /* Wait for smc boot up */ |
| /* SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL(smumgr, SMC_IND, RCU_UC_EVENTS, boot_seq_done, 0) */ |
| |
| /* Assert reset */ |
| SMUM_WRITE_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, |
| SMC_SYSCON_RESET_CNTL, rst_reg, 1); |
| |
| result = polaris10_upload_smu_firmware_image(smumgr); |
| if (result != 0) |
| return result; |
| |
| /* Clear status */ |
| cgs_write_ind_register(smumgr->device, CGS_IND_REG__SMC, ixSMU_STATUS, 0); |
| |
| SMUM_WRITE_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, |
| SMC_SYSCON_CLOCK_CNTL_0, ck_disable, 0); |
| |
| /* De-assert reset */ |
| SMUM_WRITE_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, |
| SMC_SYSCON_RESET_CNTL, rst_reg, 0); |
| |
| |
| SMUM_WAIT_VFPF_INDIRECT_FIELD(smumgr, SMC_IND, RCU_UC_EVENTS, INTERRUPTS_ENABLED, 1); |
| |
| |
| /* Call Test SMU message with 0x20000 offset to trigger SMU start */ |
| polaris10_send_msg_to_smc_offset(smumgr); |
| |
| /* Wait done bit to be set */ |
| /* Check pass/failed indicator */ |
| |
| SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL(smumgr, SMC_IND, SMU_STATUS, SMU_DONE, 0); |
| |
| if (1 != SMUM_READ_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, |
| SMU_STATUS, SMU_PASS)) |
| PP_ASSERT_WITH_CODE(false, "SMU Firmware start failed!", return -1); |
| |
| cgs_write_ind_register(smumgr->device, CGS_IND_REG__SMC, ixFIRMWARE_FLAGS, 0); |
| |
| SMUM_WRITE_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, |
| SMC_SYSCON_RESET_CNTL, rst_reg, 1); |
| |
| SMUM_WRITE_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, |
| SMC_SYSCON_RESET_CNTL, rst_reg, 0); |
| |
| /* Wait for firmware to initialize */ |
| SMUM_WAIT_VFPF_INDIRECT_FIELD(smumgr, SMC_IND, FIRMWARE_FLAGS, INTERRUPTS_ENABLED, 1); |
| |
| return result; |
| } |
| |
| static int polaris10_start_smu_in_non_protection_mode(struct pp_smumgr *smumgr) |
| { |
| int result = 0; |
| |
| /* wait for smc boot up */ |
| SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL(smumgr, SMC_IND, RCU_UC_EVENTS, boot_seq_done, 0); |
| |
| /* Clear firmware interrupt enable flag */ |
| /* SMUM_WRITE_VFPF_INDIRECT_FIELD(pSmuMgr, SMC_IND, SMC_SYSCON_MISC_CNTL, pre_fetcher_en, 1); */ |
| cgs_write_ind_register(smumgr->device, CGS_IND_REG__SMC, |
| ixFIRMWARE_FLAGS, 0); |
| |
| SMUM_WRITE_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, |
| SMC_SYSCON_RESET_CNTL, |
| rst_reg, 1); |
| |
| result = polaris10_upload_smu_firmware_image(smumgr); |
| if (result != 0) |
| return result; |
| |
| /* Set smc instruct start point at 0x0 */ |
| polaris10_program_jump_on_start(smumgr); |
| |
| SMUM_WRITE_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, |
| SMC_SYSCON_CLOCK_CNTL_0, ck_disable, 0); |
| |
| SMUM_WRITE_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, |
| SMC_SYSCON_RESET_CNTL, rst_reg, 0); |
| |
| /* Wait for firmware to initialize */ |
| |
| SMUM_WAIT_VFPF_INDIRECT_FIELD(smumgr, SMC_IND, |
| FIRMWARE_FLAGS, INTERRUPTS_ENABLED, 1); |
| |
| return result; |
| } |
| |
| static int polaris10_start_smu(struct pp_smumgr *smumgr) |
| { |
| int result = 0; |
| struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(smumgr->backend); |
| bool SMU_VFT_INTACT; |
| |
| /* Only start SMC if SMC RAM is not running */ |
| if (!polaris10_is_smc_ram_running(smumgr)) { |
| SMU_VFT_INTACT = false; |
| smu_data->protected_mode = (uint8_t) (SMUM_READ_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, SMU_FIRMWARE, SMU_MODE)); |
| smu_data->security_hard_key = (uint8_t) (SMUM_READ_VFPF_INDIRECT_FIELD(smumgr->device, CGS_IND_REG__SMC, SMU_FIRMWARE, SMU_SEL)); |
| |
| /* Check if SMU is running in protected mode */ |
| if (smu_data->protected_mode == 0) { |
| result = polaris10_start_smu_in_non_protection_mode(smumgr); |
| } else { |
| result = polaris10_start_smu_in_protection_mode(smumgr); |
| |
| /* If failed, try with different security Key. */ |
| if (result != 0) { |
| smu_data->security_hard_key ^= 1; |
| result = polaris10_start_smu_in_protection_mode(smumgr); |
| } |
| } |
| |
| if (result != 0) |
| PP_ASSERT_WITH_CODE(0, "Failed to load SMU ucode.", return result); |
| |
| polaris10_avfs_event_mgr(smumgr, true); |
| } else |
| SMU_VFT_INTACT = true; /*Driver went offline but SMU was still alive and contains the VFT table */ |
| |
| smu_data->post_initial_boot = true; |
| polaris10_avfs_event_mgr(smumgr, SMU_VFT_INTACT); |
| /* Setup SoftRegsStart here for register lookup in case DummyBackEnd is used and ProcessFirmwareHeader is not executed */ |
| polaris10_read_smc_sram_dword(smumgr, SMU7_FIRMWARE_HEADER_LOCATION + offsetof(SMU74_Firmware_Header, SoftRegisters), |
| &(smu_data->soft_regs_start), 0x40000); |
| |
| result = polaris10_request_smu_load_fw(smumgr); |
| |
| return result; |
| } |
| |
| static int polaris10_smu_init(struct pp_smumgr *smumgr) |
| { |
| struct polaris10_smumgr *smu_data; |
| uint8_t *internal_buf; |
| uint64_t mc_addr = 0; |
| /* Allocate memory for backend private data */ |
| smu_data = (struct polaris10_smumgr *)(smumgr->backend); |
| smu_data->header_buffer.data_size = |
| ((sizeof(struct SMU_DRAMData_TOC) / 4096) + 1) * 4096; |
| smu_data->smu_buffer.data_size = 200*4096; |
| smu_data->avfs.avfs_btc_status = AVFS_BTC_NOTSUPPORTED; |
| /* Allocate FW image data structure and header buffer and |
| * send the header buffer address to SMU */ |
| smu_allocate_memory(smumgr->device, |
| smu_data->header_buffer.data_size, |
| CGS_GPU_MEM_TYPE__VISIBLE_CONTIG_FB, |
| PAGE_SIZE, |
| &mc_addr, |
| &smu_data->header_buffer.kaddr, |
| &smu_data->header_buffer.handle); |
| |
| smu_data->header = smu_data->header_buffer.kaddr; |
| smu_data->header_buffer.mc_addr_high = smu_upper_32_bits(mc_addr); |
| smu_data->header_buffer.mc_addr_low = smu_lower_32_bits(mc_addr); |
| |
| PP_ASSERT_WITH_CODE((NULL != smu_data->header), |
| "Out of memory.", |
| kfree(smumgr->backend); |
| cgs_free_gpu_mem(smumgr->device, |
| (cgs_handle_t)smu_data->header_buffer.handle); |
| return -1); |
| |
| /* Allocate buffer for SMU internal buffer and send the address to SMU. |
| * Iceland SMU does not need internal buffer.*/ |
| smu_allocate_memory(smumgr->device, |
| smu_data->smu_buffer.data_size, |
| CGS_GPU_MEM_TYPE__VISIBLE_CONTIG_FB, |
| PAGE_SIZE, |
| &mc_addr, |
| &smu_data->smu_buffer.kaddr, |
| &smu_data->smu_buffer.handle); |
| |
| internal_buf = smu_data->smu_buffer.kaddr; |
| smu_data->smu_buffer.mc_addr_high = smu_upper_32_bits(mc_addr); |
| smu_data->smu_buffer.mc_addr_low = smu_lower_32_bits(mc_addr); |
| |
| PP_ASSERT_WITH_CODE((NULL != internal_buf), |
| "Out of memory.", |
| kfree(smumgr->backend); |
| cgs_free_gpu_mem(smumgr->device, |
| (cgs_handle_t)smu_data->smu_buffer.handle); |
| return -1;); |
| |
| if (polaris10_is_hw_avfs_present(smumgr)) |
| smu_data->avfs.avfs_btc_status = AVFS_BTC_BOOT; |
| else |
| smu_data->avfs.avfs_btc_status = AVFS_BTC_NOTSUPPORTED; |
| |
| return 0; |
| } |
| |
| static const struct pp_smumgr_func ellsemere_smu_funcs = { |
| .smu_init = polaris10_smu_init, |
| .smu_fini = polaris10_smu_fini, |
| .start_smu = polaris10_start_smu, |
| .check_fw_load_finish = polaris10_check_fw_load_finish, |
| .request_smu_load_fw = polaris10_reload_firmware, |
| .request_smu_load_specific_fw = NULL, |
| .send_msg_to_smc = polaris10_send_msg_to_smc, |
| .send_msg_to_smc_with_parameter = polaris10_send_msg_to_smc_with_parameter, |
| .download_pptable_settings = NULL, |
| .upload_pptable_settings = NULL, |
| }; |
| |
| int polaris10_smum_init(struct pp_smumgr *smumgr) |
| { |
| struct polaris10_smumgr *polaris10_smu = NULL; |
| |
| polaris10_smu = kzalloc(sizeof(struct polaris10_smumgr), GFP_KERNEL); |
| |
| if (polaris10_smu == NULL) |
| return -1; |
| |
| smumgr->backend = polaris10_smu; |
| smumgr->smumgr_funcs = &ellsemere_smu_funcs; |
| |
| return 0; |
| } |