|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | // | 
|  | // MFD core driver for the Maxim MAX77843 | 
|  | // | 
|  | // Copyright (C) 2015 Samsung Electronics | 
|  | // Author: Jaewon Kim <jaewon02.kim@samsung.com> | 
|  | // Author: Beomho Seo <beomho.seo@samsung.com> | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/mfd/core.h> | 
|  | #include <linux/mfd/max77693-common.h> | 
|  | #include <linux/mfd/max77843-private.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/platform_device.h> | 
|  |  | 
|  | static const struct mfd_cell max77843_devs[] = { | 
|  | { | 
|  | .name = "max77843-muic", | 
|  | .of_compatible = "maxim,max77843-muic", | 
|  | }, { | 
|  | .name = "max77843-regulator", | 
|  | .of_compatible = "maxim,max77843-regulator", | 
|  | }, { | 
|  | .name = "max77843-charger", | 
|  | .of_compatible = "maxim,max77843-charger" | 
|  | }, { | 
|  | .name = "max77843-fuelgauge", | 
|  | .of_compatible = "maxim,max77843-fuelgauge", | 
|  | }, { | 
|  | .name = "max77843-haptic", | 
|  | .of_compatible = "maxim,max77843-haptic", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config max77843_charger_regmap_config = { | 
|  | .reg_bits	= 8, | 
|  | .val_bits	= 8, | 
|  | .max_register	= MAX77843_CHG_REG_END, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config max77843_regmap_config = { | 
|  | .reg_bits	= 8, | 
|  | .val_bits	= 8, | 
|  | .max_register	= MAX77843_SYS_REG_END, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq max77843_irqs[] = { | 
|  | /* TOPSYS interrupts */ | 
|  | { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, }, | 
|  | { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, }, | 
|  | { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, }, | 
|  | { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, }, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq_chip max77843_irq_chip = { | 
|  | .name		= "max77843", | 
|  | .status_base	= MAX77843_SYS_REG_SYSINTSRC, | 
|  | .mask_base	= MAX77843_SYS_REG_SYSINTMASK, | 
|  | .mask_invert	= false, | 
|  | .num_regs	= 1, | 
|  | .irqs		= max77843_irqs, | 
|  | .num_irqs	= ARRAY_SIZE(max77843_irqs), | 
|  | }; | 
|  |  | 
|  | /* Charger and Charger regulator use same regmap. */ | 
|  | static int max77843_chg_init(struct max77693_dev *max77843) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | max77843->i2c_chg = i2c_new_dummy_device(max77843->i2c->adapter, I2C_ADDR_CHG); | 
|  | if (IS_ERR(max77843->i2c_chg)) { | 
|  | dev_err(&max77843->i2c->dev, | 
|  | "Cannot allocate I2C device for Charger\n"); | 
|  | return PTR_ERR(max77843->i2c_chg); | 
|  | } | 
|  | i2c_set_clientdata(max77843->i2c_chg, max77843); | 
|  |  | 
|  | max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg, | 
|  | &max77843_charger_regmap_config); | 
|  | if (IS_ERR(max77843->regmap_chg)) { | 
|  | ret = PTR_ERR(max77843->regmap_chg); | 
|  | goto err_chg_i2c; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_chg_i2c: | 
|  | i2c_unregister_device(max77843->i2c_chg); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int max77843_probe(struct i2c_client *i2c, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct max77693_dev *max77843; | 
|  | unsigned int reg_data; | 
|  | int ret; | 
|  |  | 
|  | max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL); | 
|  | if (!max77843) | 
|  | return -ENOMEM; | 
|  |  | 
|  | i2c_set_clientdata(i2c, max77843); | 
|  | max77843->dev = &i2c->dev; | 
|  | max77843->i2c = i2c; | 
|  | max77843->irq = i2c->irq; | 
|  | max77843->type = id->driver_data; | 
|  |  | 
|  | max77843->regmap = devm_regmap_init_i2c(i2c, | 
|  | &max77843_regmap_config); | 
|  | if (IS_ERR(max77843->regmap)) { | 
|  | dev_err(&i2c->dev, "Failed to allocate topsys register map\n"); | 
|  | return PTR_ERR(max77843->regmap); | 
|  | } | 
|  |  | 
|  | ret = regmap_add_irq_chip(max77843->regmap, max77843->irq, | 
|  | IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED, | 
|  | 0, &max77843_irq_chip, &max77843->irq_data_topsys); | 
|  | if (ret) { | 
|  | dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = regmap_read(max77843->regmap, | 
|  | MAX77843_SYS_REG_PMICID, ®_data); | 
|  | if (ret < 0) { | 
|  | dev_err(&i2c->dev, "Failed to read PMIC ID\n"); | 
|  | goto err_pmic_id; | 
|  | } | 
|  | dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data); | 
|  |  | 
|  | ret = max77843_chg_init(max77843); | 
|  | if (ret) { | 
|  | dev_err(&i2c->dev, "Failed to init Charger\n"); | 
|  | goto err_pmic_id; | 
|  | } | 
|  |  | 
|  | ret = regmap_update_bits(max77843->regmap, | 
|  | MAX77843_SYS_REG_INTSRCMASK, | 
|  | MAX77843_INTSRC_MASK_MASK, | 
|  | (unsigned int)~MAX77843_INTSRC_MASK_MASK); | 
|  | if (ret < 0) { | 
|  | dev_err(&i2c->dev, "Failed to unmask interrupt source\n"); | 
|  | goto err_pmic_id; | 
|  | } | 
|  |  | 
|  | ret = mfd_add_devices(max77843->dev, -1, max77843_devs, | 
|  | ARRAY_SIZE(max77843_devs), NULL, 0, NULL); | 
|  | if (ret < 0) { | 
|  | dev_err(&i2c->dev, "Failed to add mfd device\n"); | 
|  | goto err_pmic_id; | 
|  | } | 
|  |  | 
|  | device_init_wakeup(max77843->dev, true); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_pmic_id: | 
|  | regmap_del_irq_chip(max77843->irq, max77843->irq_data_topsys); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id max77843_dt_match[] = { | 
|  | { .compatible = "maxim,max77843", }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static const struct i2c_device_id max77843_id[] = { | 
|  | { "max77843", TYPE_MAX77843, }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static int __maybe_unused max77843_suspend(struct device *dev) | 
|  | { | 
|  | struct i2c_client *i2c = to_i2c_client(dev); | 
|  | struct max77693_dev *max77843 = i2c_get_clientdata(i2c); | 
|  |  | 
|  | disable_irq(max77843->irq); | 
|  | if (device_may_wakeup(dev)) | 
|  | enable_irq_wake(max77843->irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __maybe_unused max77843_resume(struct device *dev) | 
|  | { | 
|  | struct i2c_client *i2c = to_i2c_client(dev); | 
|  | struct max77693_dev *max77843 = i2c_get_clientdata(i2c); | 
|  |  | 
|  | if (device_may_wakeup(dev)) | 
|  | disable_irq_wake(max77843->irq); | 
|  | enable_irq(max77843->irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(max77843_pm, max77843_suspend, max77843_resume); | 
|  |  | 
|  | static struct i2c_driver max77843_i2c_driver = { | 
|  | .driver	= { | 
|  | .name = "max77843", | 
|  | .pm = &max77843_pm, | 
|  | .of_match_table = max77843_dt_match, | 
|  | .suppress_bind_attrs = true, | 
|  | }, | 
|  | .probe = max77843_probe, | 
|  | .id_table = max77843_id, | 
|  | }; | 
|  |  | 
|  | static int __init max77843_i2c_init(void) | 
|  | { | 
|  | return i2c_add_driver(&max77843_i2c_driver); | 
|  | } | 
|  | subsys_initcall(max77843_i2c_init); |