|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Released under the GPLv2 only. | 
|  | */ | 
|  |  | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/ch9.h> | 
|  | #include <linux/usb/hcd.h> | 
|  | #include <linux/usb/quirks.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/device.h> | 
|  | #include <asm/byteorder.h> | 
|  | #include "usb.h" | 
|  |  | 
|  |  | 
|  | #define USB_MAXALTSETTING		128	/* Hard limit */ | 
|  |  | 
|  | #define USB_MAXCONFIG			8	/* Arbitrary limit */ | 
|  |  | 
|  |  | 
|  | static inline const char *plural(int n) | 
|  | { | 
|  | return (n == 1 ? "" : "s"); | 
|  | } | 
|  |  | 
|  | static int find_next_descriptor(unsigned char *buffer, int size, | 
|  | int dt1, int dt2, int *num_skipped) | 
|  | { | 
|  | struct usb_descriptor_header *h; | 
|  | int n = 0; | 
|  | unsigned char *buffer0 = buffer; | 
|  |  | 
|  | /* Find the next descriptor of type dt1 or dt2 */ | 
|  | while (size > 0) { | 
|  | h = (struct usb_descriptor_header *) buffer; | 
|  | if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2) | 
|  | break; | 
|  | buffer += h->bLength; | 
|  | size -= h->bLength; | 
|  | ++n; | 
|  | } | 
|  |  | 
|  | /* Store the number of descriptors skipped and return the | 
|  | * number of bytes skipped */ | 
|  | if (num_skipped) | 
|  | *num_skipped = n; | 
|  | return buffer - buffer0; | 
|  | } | 
|  |  | 
|  | static void usb_parse_ssp_isoc_endpoint_companion(struct device *ddev, | 
|  | int cfgno, int inum, int asnum, struct usb_host_endpoint *ep, | 
|  | unsigned char *buffer, int size) | 
|  | { | 
|  | struct usb_ssp_isoc_ep_comp_descriptor *desc; | 
|  |  | 
|  | /* | 
|  | * The SuperSpeedPlus Isoc endpoint companion descriptor immediately | 
|  | * follows the SuperSpeed Endpoint Companion descriptor | 
|  | */ | 
|  | desc = (struct usb_ssp_isoc_ep_comp_descriptor *) buffer; | 
|  | if (desc->bDescriptorType != USB_DT_SSP_ISOC_ENDPOINT_COMP || | 
|  | size < USB_DT_SSP_ISOC_EP_COMP_SIZE) { | 
|  | dev_warn(ddev, "Invalid SuperSpeedPlus isoc endpoint companion" | 
|  | "for config %d interface %d altsetting %d ep %d.\n", | 
|  | cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
|  | return; | 
|  | } | 
|  | memcpy(&ep->ssp_isoc_ep_comp, desc, USB_DT_SSP_ISOC_EP_COMP_SIZE); | 
|  | } | 
|  |  | 
|  | static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, | 
|  | int inum, int asnum, struct usb_host_endpoint *ep, | 
|  | unsigned char *buffer, int size) | 
|  | { | 
|  | struct usb_ss_ep_comp_descriptor *desc; | 
|  | int max_tx; | 
|  |  | 
|  | /* The SuperSpeed endpoint companion descriptor is supposed to | 
|  | * be the first thing immediately following the endpoint descriptor. | 
|  | */ | 
|  | desc = (struct usb_ss_ep_comp_descriptor *) buffer; | 
|  |  | 
|  | if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP || | 
|  | size < USB_DT_SS_EP_COMP_SIZE) { | 
|  | dev_warn(ddev, "No SuperSpeed endpoint companion for config %d " | 
|  | " interface %d altsetting %d ep %d: " | 
|  | "using minimum values\n", | 
|  | cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
|  |  | 
|  | /* Fill in some default values. | 
|  | * Leave bmAttributes as zero, which will mean no streams for | 
|  | * bulk, and isoc won't support multiple bursts of packets. | 
|  | * With bursts of only one packet, and a Mult of 1, the max | 
|  | * amount of data moved per endpoint service interval is one | 
|  | * packet. | 
|  | */ | 
|  | ep->ss_ep_comp.bLength = USB_DT_SS_EP_COMP_SIZE; | 
|  | ep->ss_ep_comp.bDescriptorType = USB_DT_SS_ENDPOINT_COMP; | 
|  | if (usb_endpoint_xfer_isoc(&ep->desc) || | 
|  | usb_endpoint_xfer_int(&ep->desc)) | 
|  | ep->ss_ep_comp.wBytesPerInterval = | 
|  | ep->desc.wMaxPacketSize; | 
|  | return; | 
|  | } | 
|  | buffer += desc->bLength; | 
|  | size -= desc->bLength; | 
|  | memcpy(&ep->ss_ep_comp, desc, USB_DT_SS_EP_COMP_SIZE); | 
|  |  | 
|  | /* Check the various values */ | 
|  | if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) { | 
|  | dev_warn(ddev, "Control endpoint with bMaxBurst = %d in " | 
|  | "config %d interface %d altsetting %d ep %d: " | 
|  | "setting to zero\n", desc->bMaxBurst, | 
|  | cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
|  | ep->ss_ep_comp.bMaxBurst = 0; | 
|  | } else if (desc->bMaxBurst > 15) { | 
|  | dev_warn(ddev, "Endpoint with bMaxBurst = %d in " | 
|  | "config %d interface %d altsetting %d ep %d: " | 
|  | "setting to 15\n", desc->bMaxBurst, | 
|  | cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
|  | ep->ss_ep_comp.bMaxBurst = 15; | 
|  | } | 
|  |  | 
|  | if ((usb_endpoint_xfer_control(&ep->desc) || | 
|  | usb_endpoint_xfer_int(&ep->desc)) && | 
|  | desc->bmAttributes != 0) { | 
|  | dev_warn(ddev, "%s endpoint with bmAttributes = %d in " | 
|  | "config %d interface %d altsetting %d ep %d: " | 
|  | "setting to zero\n", | 
|  | usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk", | 
|  | desc->bmAttributes, | 
|  | cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
|  | ep->ss_ep_comp.bmAttributes = 0; | 
|  | } else if (usb_endpoint_xfer_bulk(&ep->desc) && | 
|  | desc->bmAttributes > 16) { | 
|  | dev_warn(ddev, "Bulk endpoint with more than 65536 streams in " | 
|  | "config %d interface %d altsetting %d ep %d: " | 
|  | "setting to max\n", | 
|  | cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
|  | ep->ss_ep_comp.bmAttributes = 16; | 
|  | } else if (usb_endpoint_xfer_isoc(&ep->desc) && | 
|  | !USB_SS_SSP_ISOC_COMP(desc->bmAttributes) && | 
|  | USB_SS_MULT(desc->bmAttributes) > 3) { | 
|  | dev_warn(ddev, "Isoc endpoint has Mult of %d in " | 
|  | "config %d interface %d altsetting %d ep %d: " | 
|  | "setting to 3\n", | 
|  | USB_SS_MULT(desc->bmAttributes), | 
|  | cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
|  | ep->ss_ep_comp.bmAttributes = 2; | 
|  | } | 
|  |  | 
|  | if (usb_endpoint_xfer_isoc(&ep->desc)) | 
|  | max_tx = (desc->bMaxBurst + 1) * | 
|  | (USB_SS_MULT(desc->bmAttributes)) * | 
|  | usb_endpoint_maxp(&ep->desc); | 
|  | else if (usb_endpoint_xfer_int(&ep->desc)) | 
|  | max_tx = usb_endpoint_maxp(&ep->desc) * | 
|  | (desc->bMaxBurst + 1); | 
|  | else | 
|  | max_tx = 999999; | 
|  | if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) { | 
|  | dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in " | 
|  | "config %d interface %d altsetting %d ep %d: " | 
|  | "setting to %d\n", | 
|  | usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int", | 
|  | le16_to_cpu(desc->wBytesPerInterval), | 
|  | cfgno, inum, asnum, ep->desc.bEndpointAddress, | 
|  | max_tx); | 
|  | ep->ss_ep_comp.wBytesPerInterval = cpu_to_le16(max_tx); | 
|  | } | 
|  | /* Parse a possible SuperSpeedPlus isoc ep companion descriptor */ | 
|  | if (usb_endpoint_xfer_isoc(&ep->desc) && | 
|  | USB_SS_SSP_ISOC_COMP(desc->bmAttributes)) | 
|  | usb_parse_ssp_isoc_endpoint_companion(ddev, cfgno, inum, asnum, | 
|  | ep, buffer, size); | 
|  | } | 
|  |  | 
|  | static const unsigned short low_speed_maxpacket_maxes[4] = { | 
|  | [USB_ENDPOINT_XFER_CONTROL] = 8, | 
|  | [USB_ENDPOINT_XFER_ISOC] = 0, | 
|  | [USB_ENDPOINT_XFER_BULK] = 0, | 
|  | [USB_ENDPOINT_XFER_INT] = 8, | 
|  | }; | 
|  | static const unsigned short full_speed_maxpacket_maxes[4] = { | 
|  | [USB_ENDPOINT_XFER_CONTROL] = 64, | 
|  | [USB_ENDPOINT_XFER_ISOC] = 1023, | 
|  | [USB_ENDPOINT_XFER_BULK] = 64, | 
|  | [USB_ENDPOINT_XFER_INT] = 64, | 
|  | }; | 
|  | static const unsigned short high_speed_maxpacket_maxes[4] = { | 
|  | [USB_ENDPOINT_XFER_CONTROL] = 64, | 
|  | [USB_ENDPOINT_XFER_ISOC] = 1024, | 
|  |  | 
|  | /* Bulk should be 512, but some devices use 1024: we will warn below */ | 
|  | [USB_ENDPOINT_XFER_BULK] = 1024, | 
|  | [USB_ENDPOINT_XFER_INT] = 1024, | 
|  | }; | 
|  | static const unsigned short super_speed_maxpacket_maxes[4] = { | 
|  | [USB_ENDPOINT_XFER_CONTROL] = 512, | 
|  | [USB_ENDPOINT_XFER_ISOC] = 1024, | 
|  | [USB_ENDPOINT_XFER_BULK] = 1024, | 
|  | [USB_ENDPOINT_XFER_INT] = 1024, | 
|  | }; | 
|  |  | 
|  | static bool endpoint_is_duplicate(struct usb_endpoint_descriptor *e1, | 
|  | struct usb_endpoint_descriptor *e2) | 
|  | { | 
|  | if (e1->bEndpointAddress == e2->bEndpointAddress) | 
|  | return true; | 
|  |  | 
|  | if (usb_endpoint_xfer_control(e1) || usb_endpoint_xfer_control(e2)) { | 
|  | if (usb_endpoint_num(e1) == usb_endpoint_num(e2)) | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check for duplicate endpoint addresses in other interfaces and in the | 
|  | * altsetting currently being parsed. | 
|  | */ | 
|  | static bool config_endpoint_is_duplicate(struct usb_host_config *config, | 
|  | int inum, int asnum, struct usb_endpoint_descriptor *d) | 
|  | { | 
|  | struct usb_endpoint_descriptor *epd; | 
|  | struct usb_interface_cache *intfc; | 
|  | struct usb_host_interface *alt; | 
|  | int i, j, k; | 
|  |  | 
|  | for (i = 0; i < config->desc.bNumInterfaces; ++i) { | 
|  | intfc = config->intf_cache[i]; | 
|  |  | 
|  | for (j = 0; j < intfc->num_altsetting; ++j) { | 
|  | alt = &intfc->altsetting[j]; | 
|  |  | 
|  | if (alt->desc.bInterfaceNumber == inum && | 
|  | alt->desc.bAlternateSetting != asnum) | 
|  | continue; | 
|  |  | 
|  | for (k = 0; k < alt->desc.bNumEndpoints; ++k) { | 
|  | epd = &alt->endpoint[k].desc; | 
|  |  | 
|  | if (endpoint_is_duplicate(epd, d)) | 
|  | return true; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static int usb_parse_endpoint(struct device *ddev, int cfgno, | 
|  | struct usb_host_config *config, int inum, int asnum, | 
|  | struct usb_host_interface *ifp, int num_ep, | 
|  | unsigned char *buffer, int size) | 
|  | { | 
|  | struct usb_device *udev = to_usb_device(ddev); | 
|  | unsigned char *buffer0 = buffer; | 
|  | struct usb_endpoint_descriptor *d; | 
|  | struct usb_host_endpoint *endpoint; | 
|  | int n, i, j, retval; | 
|  | unsigned int maxp; | 
|  | const unsigned short *maxpacket_maxes; | 
|  |  | 
|  | d = (struct usb_endpoint_descriptor *) buffer; | 
|  | buffer += d->bLength; | 
|  | size -= d->bLength; | 
|  |  | 
|  | if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE) | 
|  | n = USB_DT_ENDPOINT_AUDIO_SIZE; | 
|  | else if (d->bLength >= USB_DT_ENDPOINT_SIZE) | 
|  | n = USB_DT_ENDPOINT_SIZE; | 
|  | else { | 
|  | dev_warn(ddev, "config %d interface %d altsetting %d has an " | 
|  | "invalid endpoint descriptor of length %d, skipping\n", | 
|  | cfgno, inum, asnum, d->bLength); | 
|  | goto skip_to_next_endpoint_or_interface_descriptor; | 
|  | } | 
|  |  | 
|  | i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK; | 
|  | if (i >= 16 || i == 0) { | 
|  | dev_warn(ddev, "config %d interface %d altsetting %d has an " | 
|  | "invalid endpoint with address 0x%X, skipping\n", | 
|  | cfgno, inum, asnum, d->bEndpointAddress); | 
|  | goto skip_to_next_endpoint_or_interface_descriptor; | 
|  | } | 
|  |  | 
|  | /* Only store as many endpoints as we have room for */ | 
|  | if (ifp->desc.bNumEndpoints >= num_ep) | 
|  | goto skip_to_next_endpoint_or_interface_descriptor; | 
|  |  | 
|  | /* Check for duplicate endpoint addresses */ | 
|  | if (config_endpoint_is_duplicate(config, inum, asnum, d)) { | 
|  | dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n", | 
|  | cfgno, inum, asnum, d->bEndpointAddress); | 
|  | goto skip_to_next_endpoint_or_interface_descriptor; | 
|  | } | 
|  |  | 
|  | /* Ignore some endpoints */ | 
|  | if (udev->quirks & USB_QUIRK_ENDPOINT_IGNORE) { | 
|  | if (usb_endpoint_is_ignored(udev, ifp, d)) { | 
|  | dev_warn(ddev, "config %d interface %d altsetting %d has an ignored endpoint with address 0x%X, skipping\n", | 
|  | cfgno, inum, asnum, | 
|  | d->bEndpointAddress); | 
|  | goto skip_to_next_endpoint_or_interface_descriptor; | 
|  | } | 
|  | } | 
|  |  | 
|  | endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints]; | 
|  | ++ifp->desc.bNumEndpoints; | 
|  |  | 
|  | memcpy(&endpoint->desc, d, n); | 
|  | INIT_LIST_HEAD(&endpoint->urb_list); | 
|  |  | 
|  | /* | 
|  | * Fix up bInterval values outside the legal range. | 
|  | * Use 10 or 8 ms if no proper value can be guessed. | 
|  | */ | 
|  | i = 0;		/* i = min, j = max, n = default */ | 
|  | j = 255; | 
|  | if (usb_endpoint_xfer_int(d)) { | 
|  | i = 1; | 
|  | switch (udev->speed) { | 
|  | case USB_SPEED_SUPER_PLUS: | 
|  | case USB_SPEED_SUPER: | 
|  | case USB_SPEED_HIGH: | 
|  | /* | 
|  | * Many device manufacturers are using full-speed | 
|  | * bInterval values in high-speed interrupt endpoint | 
|  | * descriptors. Try to fix those and fall back to an | 
|  | * 8-ms default value otherwise. | 
|  | */ | 
|  | n = fls(d->bInterval*8); | 
|  | if (n == 0) | 
|  | n = 7;	/* 8 ms = 2^(7-1) uframes */ | 
|  | j = 16; | 
|  |  | 
|  | /* | 
|  | * Adjust bInterval for quirked devices. | 
|  | */ | 
|  | /* | 
|  | * This quirk fixes bIntervals reported in ms. | 
|  | */ | 
|  | if (udev->quirks & USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL) { | 
|  | n = clamp(fls(d->bInterval) + 3, i, j); | 
|  | i = j = n; | 
|  | } | 
|  | /* | 
|  | * This quirk fixes bIntervals reported in | 
|  | * linear microframes. | 
|  | */ | 
|  | if (udev->quirks & USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) { | 
|  | n = clamp(fls(d->bInterval), i, j); | 
|  | i = j = n; | 
|  | } | 
|  | break; | 
|  | default:		/* USB_SPEED_FULL or _LOW */ | 
|  | /* | 
|  | * For low-speed, 10 ms is the official minimum. | 
|  | * But some "overclocked" devices might want faster | 
|  | * polling so we'll allow it. | 
|  | */ | 
|  | n = 10; | 
|  | break; | 
|  | } | 
|  | } else if (usb_endpoint_xfer_isoc(d)) { | 
|  | i = 1; | 
|  | j = 16; | 
|  | switch (udev->speed) { | 
|  | case USB_SPEED_HIGH: | 
|  | n = 7;		/* 8 ms = 2^(7-1) uframes */ | 
|  | break; | 
|  | default:		/* USB_SPEED_FULL */ | 
|  | n = 4;		/* 8 ms = 2^(4-1) frames */ | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (d->bInterval < i || d->bInterval > j) { | 
|  | dev_warn(ddev, "config %d interface %d altsetting %d " | 
|  | "endpoint 0x%X has an invalid bInterval %d, " | 
|  | "changing to %d\n", | 
|  | cfgno, inum, asnum, | 
|  | d->bEndpointAddress, d->bInterval, n); | 
|  | endpoint->desc.bInterval = n; | 
|  | } | 
|  |  | 
|  | /* Some buggy low-speed devices have Bulk endpoints, which is | 
|  | * explicitly forbidden by the USB spec.  In an attempt to make | 
|  | * them usable, we will try treating them as Interrupt endpoints. | 
|  | */ | 
|  | if (udev->speed == USB_SPEED_LOW && usb_endpoint_xfer_bulk(d)) { | 
|  | dev_warn(ddev, "config %d interface %d altsetting %d " | 
|  | "endpoint 0x%X is Bulk; changing to Interrupt\n", | 
|  | cfgno, inum, asnum, d->bEndpointAddress); | 
|  | endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT; | 
|  | endpoint->desc.bInterval = 1; | 
|  | if (usb_endpoint_maxp(&endpoint->desc) > 8) | 
|  | endpoint->desc.wMaxPacketSize = cpu_to_le16(8); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Validate the wMaxPacketSize field. | 
|  | * Some devices have isochronous endpoints in altsetting 0; | 
|  | * the USB-2 spec requires such endpoints to have wMaxPacketSize = 0 | 
|  | * (see the end of section 5.6.3), so don't warn about them. | 
|  | */ | 
|  | maxp = usb_endpoint_maxp(&endpoint->desc); | 
|  | if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) { | 
|  | dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n", | 
|  | cfgno, inum, asnum, d->bEndpointAddress); | 
|  | } | 
|  |  | 
|  | /* Find the highest legal maxpacket size for this endpoint */ | 
|  | i = 0;		/* additional transactions per microframe */ | 
|  | switch (udev->speed) { | 
|  | case USB_SPEED_LOW: | 
|  | maxpacket_maxes = low_speed_maxpacket_maxes; | 
|  | break; | 
|  | case USB_SPEED_FULL: | 
|  | maxpacket_maxes = full_speed_maxpacket_maxes; | 
|  | break; | 
|  | case USB_SPEED_HIGH: | 
|  | /* Bits 12..11 are allowed only for HS periodic endpoints */ | 
|  | if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) { | 
|  | i = maxp & (BIT(12) | BIT(11)); | 
|  | maxp &= ~i; | 
|  | } | 
|  | fallthrough; | 
|  | default: | 
|  | maxpacket_maxes = high_speed_maxpacket_maxes; | 
|  | break; | 
|  | case USB_SPEED_SUPER: | 
|  | case USB_SPEED_SUPER_PLUS: | 
|  | maxpacket_maxes = super_speed_maxpacket_maxes; | 
|  | break; | 
|  | } | 
|  | j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)]; | 
|  |  | 
|  | if (maxp > j) { | 
|  | dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n", | 
|  | cfgno, inum, asnum, d->bEndpointAddress, maxp, j); | 
|  | maxp = j; | 
|  | endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Some buggy high speed devices have bulk endpoints using | 
|  | * maxpacket sizes other than 512.  High speed HCDs may not | 
|  | * be able to handle that particular bug, so let's warn... | 
|  | */ | 
|  | if (udev->speed == USB_SPEED_HIGH && usb_endpoint_xfer_bulk(d)) { | 
|  | if (maxp != 512) | 
|  | dev_warn(ddev, "config %d interface %d altsetting %d " | 
|  | "bulk endpoint 0x%X has invalid maxpacket %d\n", | 
|  | cfgno, inum, asnum, d->bEndpointAddress, | 
|  | maxp); | 
|  | } | 
|  |  | 
|  | /* Parse a possible SuperSpeed endpoint companion descriptor */ | 
|  | if (udev->speed >= USB_SPEED_SUPER) | 
|  | usb_parse_ss_endpoint_companion(ddev, cfgno, | 
|  | inum, asnum, endpoint, buffer, size); | 
|  |  | 
|  | /* Skip over any Class Specific or Vendor Specific descriptors; | 
|  | * find the next endpoint or interface descriptor */ | 
|  | endpoint->extra = buffer; | 
|  | i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, | 
|  | USB_DT_INTERFACE, &n); | 
|  | endpoint->extralen = i; | 
|  | retval = buffer - buffer0 + i; | 
|  | if (n > 0) | 
|  | dev_dbg(ddev, "skipped %d descriptor%s after %s\n", | 
|  | n, plural(n), "endpoint"); | 
|  | return retval; | 
|  |  | 
|  | skip_to_next_endpoint_or_interface_descriptor: | 
|  | i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, | 
|  | USB_DT_INTERFACE, NULL); | 
|  | return buffer - buffer0 + i; | 
|  | } | 
|  |  | 
|  | void usb_release_interface_cache(struct kref *ref) | 
|  | { | 
|  | struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref); | 
|  | int j; | 
|  |  | 
|  | for (j = 0; j < intfc->num_altsetting; j++) { | 
|  | struct usb_host_interface *alt = &intfc->altsetting[j]; | 
|  |  | 
|  | kfree(alt->endpoint); | 
|  | kfree(alt->string); | 
|  | } | 
|  | kfree(intfc); | 
|  | } | 
|  |  | 
|  | static int usb_parse_interface(struct device *ddev, int cfgno, | 
|  | struct usb_host_config *config, unsigned char *buffer, int size, | 
|  | u8 inums[], u8 nalts[]) | 
|  | { | 
|  | unsigned char *buffer0 = buffer; | 
|  | struct usb_interface_descriptor	*d; | 
|  | int inum, asnum; | 
|  | struct usb_interface_cache *intfc; | 
|  | struct usb_host_interface *alt; | 
|  | int i, n; | 
|  | int len, retval; | 
|  | int num_ep, num_ep_orig; | 
|  |  | 
|  | d = (struct usb_interface_descriptor *) buffer; | 
|  | buffer += d->bLength; | 
|  | size -= d->bLength; | 
|  |  | 
|  | if (d->bLength < USB_DT_INTERFACE_SIZE) | 
|  | goto skip_to_next_interface_descriptor; | 
|  |  | 
|  | /* Which interface entry is this? */ | 
|  | intfc = NULL; | 
|  | inum = d->bInterfaceNumber; | 
|  | for (i = 0; i < config->desc.bNumInterfaces; ++i) { | 
|  | if (inums[i] == inum) { | 
|  | intfc = config->intf_cache[i]; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!intfc || intfc->num_altsetting >= nalts[i]) | 
|  | goto skip_to_next_interface_descriptor; | 
|  |  | 
|  | /* Check for duplicate altsetting entries */ | 
|  | asnum = d->bAlternateSetting; | 
|  | for ((i = 0, alt = &intfc->altsetting[0]); | 
|  | i < intfc->num_altsetting; | 
|  | (++i, ++alt)) { | 
|  | if (alt->desc.bAlternateSetting == asnum) { | 
|  | dev_warn(ddev, "Duplicate descriptor for config %d " | 
|  | "interface %d altsetting %d, skipping\n", | 
|  | cfgno, inum, asnum); | 
|  | goto skip_to_next_interface_descriptor; | 
|  | } | 
|  | } | 
|  |  | 
|  | ++intfc->num_altsetting; | 
|  | memcpy(&alt->desc, d, USB_DT_INTERFACE_SIZE); | 
|  |  | 
|  | /* Skip over any Class Specific or Vendor Specific descriptors; | 
|  | * find the first endpoint or interface descriptor */ | 
|  | alt->extra = buffer; | 
|  | i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, | 
|  | USB_DT_INTERFACE, &n); | 
|  | alt->extralen = i; | 
|  | if (n > 0) | 
|  | dev_dbg(ddev, "skipped %d descriptor%s after %s\n", | 
|  | n, plural(n), "interface"); | 
|  | buffer += i; | 
|  | size -= i; | 
|  |  | 
|  | /* Allocate space for the right(?) number of endpoints */ | 
|  | num_ep = num_ep_orig = alt->desc.bNumEndpoints; | 
|  | alt->desc.bNumEndpoints = 0;		/* Use as a counter */ | 
|  | if (num_ep > USB_MAXENDPOINTS) { | 
|  | dev_warn(ddev, "too many endpoints for config %d interface %d " | 
|  | "altsetting %d: %d, using maximum allowed: %d\n", | 
|  | cfgno, inum, asnum, num_ep, USB_MAXENDPOINTS); | 
|  | num_ep = USB_MAXENDPOINTS; | 
|  | } | 
|  |  | 
|  | if (num_ep > 0) { | 
|  | /* Can't allocate 0 bytes */ | 
|  | len = sizeof(struct usb_host_endpoint) * num_ep; | 
|  | alt->endpoint = kzalloc(len, GFP_KERNEL); | 
|  | if (!alt->endpoint) | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Parse all the endpoint descriptors */ | 
|  | n = 0; | 
|  | while (size > 0) { | 
|  | if (((struct usb_descriptor_header *) buffer)->bDescriptorType | 
|  | == USB_DT_INTERFACE) | 
|  | break; | 
|  | retval = usb_parse_endpoint(ddev, cfgno, config, inum, asnum, | 
|  | alt, num_ep, buffer, size); | 
|  | if (retval < 0) | 
|  | return retval; | 
|  | ++n; | 
|  |  | 
|  | buffer += retval; | 
|  | size -= retval; | 
|  | } | 
|  |  | 
|  | if (n != num_ep_orig) | 
|  | dev_warn(ddev, "config %d interface %d altsetting %d has %d " | 
|  | "endpoint descriptor%s, different from the interface " | 
|  | "descriptor's value: %d\n", | 
|  | cfgno, inum, asnum, n, plural(n), num_ep_orig); | 
|  | return buffer - buffer0; | 
|  |  | 
|  | skip_to_next_interface_descriptor: | 
|  | i = find_next_descriptor(buffer, size, USB_DT_INTERFACE, | 
|  | USB_DT_INTERFACE, NULL); | 
|  | return buffer - buffer0 + i; | 
|  | } | 
|  |  | 
|  | static int usb_parse_configuration(struct usb_device *dev, int cfgidx, | 
|  | struct usb_host_config *config, unsigned char *buffer, int size) | 
|  | { | 
|  | struct device *ddev = &dev->dev; | 
|  | unsigned char *buffer0 = buffer; | 
|  | int cfgno; | 
|  | int nintf, nintf_orig; | 
|  | int i, j, n; | 
|  | struct usb_interface_cache *intfc; | 
|  | unsigned char *buffer2; | 
|  | int size2; | 
|  | struct usb_descriptor_header *header; | 
|  | int retval; | 
|  | u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES]; | 
|  | unsigned iad_num = 0; | 
|  |  | 
|  | memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE); | 
|  | nintf = nintf_orig = config->desc.bNumInterfaces; | 
|  | config->desc.bNumInterfaces = 0;	// Adjusted later | 
|  |  | 
|  | if (config->desc.bDescriptorType != USB_DT_CONFIG || | 
|  | config->desc.bLength < USB_DT_CONFIG_SIZE || | 
|  | config->desc.bLength > size) { | 
|  | dev_err(ddev, "invalid descriptor for config index %d: " | 
|  | "type = 0x%X, length = %d\n", cfgidx, | 
|  | config->desc.bDescriptorType, config->desc.bLength); | 
|  | return -EINVAL; | 
|  | } | 
|  | cfgno = config->desc.bConfigurationValue; | 
|  |  | 
|  | buffer += config->desc.bLength; | 
|  | size -= config->desc.bLength; | 
|  |  | 
|  | if (nintf > USB_MAXINTERFACES) { | 
|  | dev_warn(ddev, "config %d has too many interfaces: %d, " | 
|  | "using maximum allowed: %d\n", | 
|  | cfgno, nintf, USB_MAXINTERFACES); | 
|  | nintf = USB_MAXINTERFACES; | 
|  | } | 
|  |  | 
|  | /* Go through the descriptors, checking their length and counting the | 
|  | * number of altsettings for each interface */ | 
|  | n = 0; | 
|  | for ((buffer2 = buffer, size2 = size); | 
|  | size2 > 0; | 
|  | (buffer2 += header->bLength, size2 -= header->bLength)) { | 
|  |  | 
|  | if (size2 < sizeof(struct usb_descriptor_header)) { | 
|  | dev_warn(ddev, "config %d descriptor has %d excess " | 
|  | "byte%s, ignoring\n", | 
|  | cfgno, size2, plural(size2)); | 
|  | break; | 
|  | } | 
|  |  | 
|  | header = (struct usb_descriptor_header *) buffer2; | 
|  | if ((header->bLength > size2) || (header->bLength < 2)) { | 
|  | dev_warn(ddev, "config %d has an invalid descriptor " | 
|  | "of length %d, skipping remainder of the config\n", | 
|  | cfgno, header->bLength); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (header->bDescriptorType == USB_DT_INTERFACE) { | 
|  | struct usb_interface_descriptor *d; | 
|  | int inum; | 
|  |  | 
|  | d = (struct usb_interface_descriptor *) header; | 
|  | if (d->bLength < USB_DT_INTERFACE_SIZE) { | 
|  | dev_warn(ddev, "config %d has an invalid " | 
|  | "interface descriptor of length %d, " | 
|  | "skipping\n", cfgno, d->bLength); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | inum = d->bInterfaceNumber; | 
|  |  | 
|  | if ((dev->quirks & USB_QUIRK_HONOR_BNUMINTERFACES) && | 
|  | n >= nintf_orig) { | 
|  | dev_warn(ddev, "config %d has more interface " | 
|  | "descriptors, than it declares in " | 
|  | "bNumInterfaces, ignoring interface " | 
|  | "number: %d\n", cfgno, inum); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (inum >= nintf_orig) | 
|  | dev_warn(ddev, "config %d has an invalid " | 
|  | "interface number: %d but max is %d\n", | 
|  | cfgno, inum, nintf_orig - 1); | 
|  |  | 
|  | /* Have we already encountered this interface? | 
|  | * Count its altsettings */ | 
|  | for (i = 0; i < n; ++i) { | 
|  | if (inums[i] == inum) | 
|  | break; | 
|  | } | 
|  | if (i < n) { | 
|  | if (nalts[i] < 255) | 
|  | ++nalts[i]; | 
|  | } else if (n < USB_MAXINTERFACES) { | 
|  | inums[n] = inum; | 
|  | nalts[n] = 1; | 
|  | ++n; | 
|  | } | 
|  |  | 
|  | } else if (header->bDescriptorType == | 
|  | USB_DT_INTERFACE_ASSOCIATION) { | 
|  | struct usb_interface_assoc_descriptor *d; | 
|  |  | 
|  | d = (struct usb_interface_assoc_descriptor *)header; | 
|  | if (d->bLength < USB_DT_INTERFACE_ASSOCIATION_SIZE) { | 
|  | dev_warn(ddev, | 
|  | "config %d has an invalid interface association descriptor of length %d, skipping\n", | 
|  | cfgno, d->bLength); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (iad_num == USB_MAXIADS) { | 
|  | dev_warn(ddev, "found more Interface " | 
|  | "Association Descriptors " | 
|  | "than allocated for in " | 
|  | "configuration %d\n", cfgno); | 
|  | } else { | 
|  | config->intf_assoc[iad_num] = d; | 
|  | iad_num++; | 
|  | } | 
|  |  | 
|  | } else if (header->bDescriptorType == USB_DT_DEVICE || | 
|  | header->bDescriptorType == USB_DT_CONFIG) | 
|  | dev_warn(ddev, "config %d contains an unexpected " | 
|  | "descriptor of type 0x%X, skipping\n", | 
|  | cfgno, header->bDescriptorType); | 
|  |  | 
|  | }	/* for ((buffer2 = buffer, size2 = size); ...) */ | 
|  | size = buffer2 - buffer; | 
|  | config->desc.wTotalLength = cpu_to_le16(buffer2 - buffer0); | 
|  |  | 
|  | if (n != nintf) | 
|  | dev_warn(ddev, "config %d has %d interface%s, different from " | 
|  | "the descriptor's value: %d\n", | 
|  | cfgno, n, plural(n), nintf_orig); | 
|  | else if (n == 0) | 
|  | dev_warn(ddev, "config %d has no interfaces?\n", cfgno); | 
|  | config->desc.bNumInterfaces = nintf = n; | 
|  |  | 
|  | /* Check for missing interface numbers */ | 
|  | for (i = 0; i < nintf; ++i) { | 
|  | for (j = 0; j < nintf; ++j) { | 
|  | if (inums[j] == i) | 
|  | break; | 
|  | } | 
|  | if (j >= nintf) | 
|  | dev_warn(ddev, "config %d has no interface number " | 
|  | "%d\n", cfgno, i); | 
|  | } | 
|  |  | 
|  | /* Allocate the usb_interface_caches and altsetting arrays */ | 
|  | for (i = 0; i < nintf; ++i) { | 
|  | j = nalts[i]; | 
|  | if (j > USB_MAXALTSETTING) { | 
|  | dev_warn(ddev, "too many alternate settings for " | 
|  | "config %d interface %d: %d, " | 
|  | "using maximum allowed: %d\n", | 
|  | cfgno, inums[i], j, USB_MAXALTSETTING); | 
|  | nalts[i] = j = USB_MAXALTSETTING; | 
|  | } | 
|  |  | 
|  | intfc = kzalloc(struct_size(intfc, altsetting, j), GFP_KERNEL); | 
|  | config->intf_cache[i] = intfc; | 
|  | if (!intfc) | 
|  | return -ENOMEM; | 
|  | kref_init(&intfc->ref); | 
|  | } | 
|  |  | 
|  | /* FIXME: parse the BOS descriptor */ | 
|  |  | 
|  | /* Skip over any Class Specific or Vendor Specific descriptors; | 
|  | * find the first interface descriptor */ | 
|  | config->extra = buffer; | 
|  | i = find_next_descriptor(buffer, size, USB_DT_INTERFACE, | 
|  | USB_DT_INTERFACE, &n); | 
|  | config->extralen = i; | 
|  | if (n > 0) | 
|  | dev_dbg(ddev, "skipped %d descriptor%s after %s\n", | 
|  | n, plural(n), "configuration"); | 
|  | buffer += i; | 
|  | size -= i; | 
|  |  | 
|  | /* Parse all the interface/altsetting descriptors */ | 
|  | while (size > 0) { | 
|  | retval = usb_parse_interface(ddev, cfgno, config, | 
|  | buffer, size, inums, nalts); | 
|  | if (retval < 0) | 
|  | return retval; | 
|  |  | 
|  | buffer += retval; | 
|  | size -= retval; | 
|  | } | 
|  |  | 
|  | /* Check for missing altsettings */ | 
|  | for (i = 0; i < nintf; ++i) { | 
|  | intfc = config->intf_cache[i]; | 
|  | for (j = 0; j < intfc->num_altsetting; ++j) { | 
|  | for (n = 0; n < intfc->num_altsetting; ++n) { | 
|  | if (intfc->altsetting[n].desc. | 
|  | bAlternateSetting == j) | 
|  | break; | 
|  | } | 
|  | if (n >= intfc->num_altsetting) | 
|  | dev_warn(ddev, "config %d interface %d has no " | 
|  | "altsetting %d\n", cfgno, inums[i], j); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* hub-only!! ... and only exported for reset/reinit path. | 
|  | * otherwise used internally on disconnect/destroy path | 
|  | */ | 
|  | void usb_destroy_configuration(struct usb_device *dev) | 
|  | { | 
|  | int c, i; | 
|  |  | 
|  | if (!dev->config) | 
|  | return; | 
|  |  | 
|  | if (dev->rawdescriptors) { | 
|  | for (i = 0; i < dev->descriptor.bNumConfigurations; i++) | 
|  | kfree(dev->rawdescriptors[i]); | 
|  |  | 
|  | kfree(dev->rawdescriptors); | 
|  | dev->rawdescriptors = NULL; | 
|  | } | 
|  |  | 
|  | for (c = 0; c < dev->descriptor.bNumConfigurations; c++) { | 
|  | struct usb_host_config *cf = &dev->config[c]; | 
|  |  | 
|  | kfree(cf->string); | 
|  | for (i = 0; i < cf->desc.bNumInterfaces; i++) { | 
|  | if (cf->intf_cache[i]) | 
|  | kref_put(&cf->intf_cache[i]->ref, | 
|  | usb_release_interface_cache); | 
|  | } | 
|  | } | 
|  | kfree(dev->config); | 
|  | dev->config = NULL; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Get the USB config descriptors, cache and parse'em | 
|  | * | 
|  | * hub-only!! ... and only in reset path, or usb_new_device() | 
|  | * (used by real hubs and virtual root hubs) | 
|  | */ | 
|  | int usb_get_configuration(struct usb_device *dev) | 
|  | { | 
|  | struct device *ddev = &dev->dev; | 
|  | int ncfg = dev->descriptor.bNumConfigurations; | 
|  | unsigned int cfgno, length; | 
|  | unsigned char *bigbuffer; | 
|  | struct usb_config_descriptor *desc; | 
|  | int result; | 
|  |  | 
|  | if (ncfg > USB_MAXCONFIG) { | 
|  | dev_warn(ddev, "too many configurations: %d, " | 
|  | "using maximum allowed: %d\n", ncfg, USB_MAXCONFIG); | 
|  | dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG; | 
|  | } | 
|  |  | 
|  | if (ncfg < 1) { | 
|  | dev_err(ddev, "no configurations\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | length = ncfg * sizeof(struct usb_host_config); | 
|  | dev->config = kzalloc(length, GFP_KERNEL); | 
|  | if (!dev->config) | 
|  | return -ENOMEM; | 
|  |  | 
|  | length = ncfg * sizeof(char *); | 
|  | dev->rawdescriptors = kzalloc(length, GFP_KERNEL); | 
|  | if (!dev->rawdescriptors) | 
|  | return -ENOMEM; | 
|  |  | 
|  | desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL); | 
|  | if (!desc) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (cfgno = 0; cfgno < ncfg; cfgno++) { | 
|  | /* We grab just the first descriptor so we know how long | 
|  | * the whole configuration is */ | 
|  | result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, | 
|  | desc, USB_DT_CONFIG_SIZE); | 
|  | if (result < 0) { | 
|  | dev_err(ddev, "unable to read config index %d " | 
|  | "descriptor/%s: %d\n", cfgno, "start", result); | 
|  | if (result != -EPIPE) | 
|  | goto err; | 
|  | dev_err(ddev, "chopping to %d config(s)\n", cfgno); | 
|  | dev->descriptor.bNumConfigurations = cfgno; | 
|  | break; | 
|  | } else if (result < 4) { | 
|  | dev_err(ddev, "config index %d descriptor too short " | 
|  | "(expected %i, got %i)\n", cfgno, | 
|  | USB_DT_CONFIG_SIZE, result); | 
|  | result = -EINVAL; | 
|  | goto err; | 
|  | } | 
|  | length = max((int) le16_to_cpu(desc->wTotalLength), | 
|  | USB_DT_CONFIG_SIZE); | 
|  |  | 
|  | /* Now that we know the length, get the whole thing */ | 
|  | bigbuffer = kmalloc(length, GFP_KERNEL); | 
|  | if (!bigbuffer) { | 
|  | result = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (dev->quirks & USB_QUIRK_DELAY_INIT) | 
|  | msleep(200); | 
|  |  | 
|  | result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, | 
|  | bigbuffer, length); | 
|  | if (result < 0) { | 
|  | dev_err(ddev, "unable to read config index %d " | 
|  | "descriptor/%s\n", cfgno, "all"); | 
|  | kfree(bigbuffer); | 
|  | goto err; | 
|  | } | 
|  | if (result < length) { | 
|  | dev_warn(ddev, "config index %d descriptor too short " | 
|  | "(expected %i, got %i)\n", cfgno, length, result); | 
|  | length = result; | 
|  | } | 
|  |  | 
|  | dev->rawdescriptors[cfgno] = bigbuffer; | 
|  |  | 
|  | result = usb_parse_configuration(dev, cfgno, | 
|  | &dev->config[cfgno], bigbuffer, length); | 
|  | if (result < 0) { | 
|  | ++cfgno; | 
|  | goto err; | 
|  | } | 
|  | } | 
|  |  | 
|  | err: | 
|  | kfree(desc); | 
|  | dev->descriptor.bNumConfigurations = cfgno; | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | void usb_release_bos_descriptor(struct usb_device *dev) | 
|  | { | 
|  | if (dev->bos) { | 
|  | kfree(dev->bos->desc); | 
|  | kfree(dev->bos); | 
|  | dev->bos = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static const __u8 bos_desc_len[256] = { | 
|  | [USB_CAP_TYPE_WIRELESS_USB] = USB_DT_USB_WIRELESS_CAP_SIZE, | 
|  | [USB_CAP_TYPE_EXT]          = USB_DT_USB_EXT_CAP_SIZE, | 
|  | [USB_SS_CAP_TYPE]           = USB_DT_USB_SS_CAP_SIZE, | 
|  | [USB_SSP_CAP_TYPE]          = USB_DT_USB_SSP_CAP_SIZE(1), | 
|  | [CONTAINER_ID_TYPE]         = USB_DT_USB_SS_CONTN_ID_SIZE, | 
|  | [USB_PTM_CAP_TYPE]          = USB_DT_USB_PTM_ID_SIZE, | 
|  | }; | 
|  |  | 
|  | /* Get BOS descriptor set */ | 
|  | int usb_get_bos_descriptor(struct usb_device *dev) | 
|  | { | 
|  | struct device *ddev = &dev->dev; | 
|  | struct usb_bos_descriptor *bos; | 
|  | struct usb_dev_cap_header *cap; | 
|  | struct usb_ssp_cap_descriptor *ssp_cap; | 
|  | unsigned char *buffer, *buffer0; | 
|  | int length, total_len, num, i, ssac; | 
|  | __u8 cap_type; | 
|  | int ret; | 
|  |  | 
|  | bos = kzalloc(sizeof(*bos), GFP_KERNEL); | 
|  | if (!bos) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Get BOS descriptor */ | 
|  | ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE); | 
|  | if (ret < USB_DT_BOS_SIZE || bos->bLength < USB_DT_BOS_SIZE) { | 
|  | dev_err(ddev, "unable to get BOS descriptor or descriptor too short\n"); | 
|  | if (ret >= 0) | 
|  | ret = -ENOMSG; | 
|  | kfree(bos); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | length = bos->bLength; | 
|  | total_len = le16_to_cpu(bos->wTotalLength); | 
|  | num = bos->bNumDeviceCaps; | 
|  | kfree(bos); | 
|  | if (total_len < length) | 
|  | return -EINVAL; | 
|  |  | 
|  | dev->bos = kzalloc(sizeof(*dev->bos), GFP_KERNEL); | 
|  | if (!dev->bos) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Now let's get the whole BOS descriptor set */ | 
|  | buffer = kzalloc(total_len, GFP_KERNEL); | 
|  | if (!buffer) { | 
|  | ret = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  | dev->bos->desc = (struct usb_bos_descriptor *)buffer; | 
|  |  | 
|  | ret = usb_get_descriptor(dev, USB_DT_BOS, 0, buffer, total_len); | 
|  | if (ret < total_len) { | 
|  | dev_err(ddev, "unable to get BOS descriptor set\n"); | 
|  | if (ret >= 0) | 
|  | ret = -ENOMSG; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | buffer0 = buffer; | 
|  | total_len -= length; | 
|  | buffer += length; | 
|  |  | 
|  | for (i = 0; i < num; i++) { | 
|  | cap = (struct usb_dev_cap_header *)buffer; | 
|  |  | 
|  | if (total_len < sizeof(*cap) || total_len < cap->bLength) { | 
|  | dev->bos->desc->bNumDeviceCaps = i; | 
|  | break; | 
|  | } | 
|  | cap_type = cap->bDevCapabilityType; | 
|  | length = cap->bLength; | 
|  | if (bos_desc_len[cap_type] && length < bos_desc_len[cap_type]) { | 
|  | dev->bos->desc->bNumDeviceCaps = i; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) { | 
|  | dev_warn(ddev, "descriptor type invalid, skip\n"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | switch (cap_type) { | 
|  | case USB_CAP_TYPE_WIRELESS_USB: | 
|  | /* Wireless USB cap descriptor is handled by wusb */ | 
|  | break; | 
|  | case USB_CAP_TYPE_EXT: | 
|  | dev->bos->ext_cap = | 
|  | (struct usb_ext_cap_descriptor *)buffer; | 
|  | break; | 
|  | case USB_SS_CAP_TYPE: | 
|  | dev->bos->ss_cap = | 
|  | (struct usb_ss_cap_descriptor *)buffer; | 
|  | break; | 
|  | case USB_SSP_CAP_TYPE: | 
|  | ssp_cap = (struct usb_ssp_cap_descriptor *)buffer; | 
|  | ssac = (le32_to_cpu(ssp_cap->bmAttributes) & | 
|  | USB_SSP_SUBLINK_SPEED_ATTRIBS); | 
|  | if (length >= USB_DT_USB_SSP_CAP_SIZE(ssac)) | 
|  | dev->bos->ssp_cap = ssp_cap; | 
|  | break; | 
|  | case CONTAINER_ID_TYPE: | 
|  | dev->bos->ss_id = | 
|  | (struct usb_ss_container_id_descriptor *)buffer; | 
|  | break; | 
|  | case USB_PTM_CAP_TYPE: | 
|  | dev->bos->ptm_cap = | 
|  | (struct usb_ptm_cap_descriptor *)buffer; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | total_len -= length; | 
|  | buffer += length; | 
|  | } | 
|  | dev->bos->desc->wTotalLength = cpu_to_le16(buffer - buffer0); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | usb_release_bos_descriptor(dev); | 
|  | return ret; | 
|  | } |