| /* |
| * Driver for the Auvitek USB bridge |
| * |
| * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-common.h> |
| #include <linux/mutex.h> |
| |
| #include "au0828.h" |
| |
| /* |
| * 1 = General debug messages |
| * 2 = USB handling |
| * 4 = I2C related |
| * 8 = Bridge related |
| */ |
| int au0828_debug; |
| module_param_named(debug, au0828_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable debug messages"); |
| |
| static unsigned int disable_usb_speed_check; |
| module_param(disable_usb_speed_check, int, 0444); |
| MODULE_PARM_DESC(disable_usb_speed_check, |
| "override min bandwidth requirement of 480M bps"); |
| |
| #define _AU0828_BULKPIPE 0x03 |
| #define _BULKPIPESIZE 0xffff |
| |
| static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, |
| u16 index); |
| static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value, |
| u16 index, unsigned char *cp, u16 size); |
| |
| /* USB Direction */ |
| #define CMD_REQUEST_IN 0x00 |
| #define CMD_REQUEST_OUT 0x01 |
| |
| u32 au0828_readreg(struct au0828_dev *dev, u16 reg) |
| { |
| u8 result = 0; |
| |
| recv_control_msg(dev, CMD_REQUEST_IN, 0, reg, &result, 1); |
| dprintk(8, "%s(0x%04x) = 0x%02x\n", __func__, reg, result); |
| |
| return result; |
| } |
| |
| u32 au0828_writereg(struct au0828_dev *dev, u16 reg, u32 val) |
| { |
| dprintk(8, "%s(0x%04x, 0x%02x)\n", __func__, reg, val); |
| return send_control_msg(dev, CMD_REQUEST_OUT, val, reg); |
| } |
| |
| static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, |
| u16 index) |
| { |
| int status = -ENODEV; |
| |
| if (dev->usbdev) { |
| |
| /* cp must be memory that has been allocated by kmalloc */ |
| status = usb_control_msg(dev->usbdev, |
| usb_sndctrlpipe(dev->usbdev, 0), |
| request, |
| USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_DEVICE, |
| value, index, NULL, 0, 1000); |
| |
| status = min(status, 0); |
| |
| if (status < 0) { |
| printk(KERN_ERR "%s() Failed sending control message, error %d.\n", |
| __func__, status); |
| } |
| |
| } |
| |
| return status; |
| } |
| |
| static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value, |
| u16 index, unsigned char *cp, u16 size) |
| { |
| int status = -ENODEV; |
| mutex_lock(&dev->mutex); |
| if (dev->usbdev) { |
| status = usb_control_msg(dev->usbdev, |
| usb_rcvctrlpipe(dev->usbdev, 0), |
| request, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, index, |
| dev->ctrlmsg, size, 1000); |
| |
| status = min(status, 0); |
| |
| if (status < 0) { |
| printk(KERN_ERR "%s() Failed receiving control message, error %d.\n", |
| __func__, status); |
| } |
| |
| /* the host controller requires heap allocated memory, which |
| is why we didn't just pass "cp" into usb_control_msg */ |
| memcpy(cp, dev->ctrlmsg, size); |
| } |
| mutex_unlock(&dev->mutex); |
| return status; |
| } |
| |
| static void au0828_usb_release(struct au0828_dev *dev) |
| { |
| /* I2C */ |
| au0828_i2c_unregister(dev); |
| |
| kfree(dev); |
| } |
| |
| #ifdef CONFIG_VIDEO_AU0828_V4L2 |
| static void au0828_usb_v4l2_release(struct v4l2_device *v4l2_dev) |
| { |
| struct au0828_dev *dev = |
| container_of(v4l2_dev, struct au0828_dev, v4l2_dev); |
| |
| v4l2_ctrl_handler_free(&dev->v4l2_ctrl_hdl); |
| v4l2_device_unregister(&dev->v4l2_dev); |
| au0828_usb_release(dev); |
| } |
| #endif |
| |
| static void au0828_usb_disconnect(struct usb_interface *interface) |
| { |
| struct au0828_dev *dev = usb_get_intfdata(interface); |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| /* Digital TV */ |
| au0828_dvb_unregister(dev); |
| |
| usb_set_intfdata(interface, NULL); |
| mutex_lock(&dev->mutex); |
| dev->usbdev = NULL; |
| mutex_unlock(&dev->mutex); |
| #ifdef CONFIG_VIDEO_AU0828_V4L2 |
| if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED) { |
| au0828_analog_unregister(dev); |
| v4l2_device_disconnect(&dev->v4l2_dev); |
| v4l2_device_put(&dev->v4l2_dev); |
| return; |
| } |
| #endif |
| au0828_usb_release(dev); |
| } |
| |
| static int au0828_usb_probe(struct usb_interface *interface, |
| const struct usb_device_id *id) |
| { |
| int ifnum; |
| #ifdef CONFIG_VIDEO_AU0828_V4L2 |
| int retval; |
| #endif |
| struct au0828_dev *dev; |
| struct usb_device *usbdev = interface_to_usbdev(interface); |
| |
| ifnum = interface->altsetting->desc.bInterfaceNumber; |
| |
| if (ifnum != 0) |
| return -ENODEV; |
| |
| dprintk(1, "%s() vendor id 0x%x device id 0x%x ifnum:%d\n", __func__, |
| le16_to_cpu(usbdev->descriptor.idVendor), |
| le16_to_cpu(usbdev->descriptor.idProduct), |
| ifnum); |
| |
| /* |
| * Make sure we have 480 Mbps of bandwidth, otherwise things like |
| * video stream wouldn't likely work, since 12 Mbps is generally |
| * not enough even for most Digital TV streams. |
| */ |
| if (usbdev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { |
| printk(KERN_ERR "au0828: Device initialization failed.\n"); |
| printk(KERN_ERR "au0828: Device must be connected to a " |
| "high-speed USB 2.0 port.\n"); |
| return -ENODEV; |
| } |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (dev == NULL) { |
| printk(KERN_ERR "%s() Unable to allocate memory\n", __func__); |
| return -ENOMEM; |
| } |
| |
| mutex_init(&dev->lock); |
| mutex_lock(&dev->lock); |
| mutex_init(&dev->mutex); |
| mutex_init(&dev->dvb.lock); |
| dev->usbdev = usbdev; |
| dev->boardnr = id->driver_info; |
| |
| #ifdef CONFIG_VIDEO_AU0828_V4L2 |
| dev->v4l2_dev.release = au0828_usb_v4l2_release; |
| |
| /* Create the v4l2_device */ |
| retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev); |
| if (retval) { |
| pr_err("%s() v4l2_device_register failed\n", |
| __func__); |
| mutex_unlock(&dev->lock); |
| kfree(dev); |
| return retval; |
| } |
| /* This control handler will inherit the controls from au8522 */ |
| retval = v4l2_ctrl_handler_init(&dev->v4l2_ctrl_hdl, 4); |
| if (retval) { |
| pr_err("%s() v4l2_ctrl_handler_init failed\n", |
| __func__); |
| mutex_unlock(&dev->lock); |
| kfree(dev); |
| return retval; |
| } |
| dev->v4l2_dev.ctrl_handler = &dev->v4l2_ctrl_hdl; |
| #endif |
| |
| /* Power Up the bridge */ |
| au0828_write(dev, REG_600, 1 << 4); |
| |
| /* Bring up the GPIO's and supporting devices */ |
| au0828_gpio_setup(dev); |
| |
| /* I2C */ |
| au0828_i2c_register(dev); |
| |
| /* Setup */ |
| au0828_card_setup(dev); |
| |
| #ifdef CONFIG_VIDEO_AU0828_V4L2 |
| /* Analog TV */ |
| if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED) |
| au0828_analog_register(dev, interface); |
| #endif |
| |
| /* Digital TV */ |
| au0828_dvb_register(dev); |
| |
| /* Store the pointer to the au0828_dev so it can be accessed in |
| au0828_usb_disconnect */ |
| usb_set_intfdata(interface, dev); |
| |
| printk(KERN_INFO "Registered device AU0828 [%s]\n", |
| dev->board.name == NULL ? "Unset" : dev->board.name); |
| |
| mutex_unlock(&dev->lock); |
| |
| return 0; |
| } |
| |
| static struct usb_driver au0828_usb_driver = { |
| .name = DRIVER_NAME, |
| .probe = au0828_usb_probe, |
| .disconnect = au0828_usb_disconnect, |
| .id_table = au0828_usb_id_table, |
| }; |
| |
| static int __init au0828_init(void) |
| { |
| int ret; |
| |
| if (au0828_debug & 1) |
| printk(KERN_INFO "%s() Debugging is enabled\n", __func__); |
| |
| if (au0828_debug & 2) |
| printk(KERN_INFO "%s() USB Debugging is enabled\n", __func__); |
| |
| if (au0828_debug & 4) |
| printk(KERN_INFO "%s() I2C Debugging is enabled\n", __func__); |
| |
| if (au0828_debug & 8) |
| printk(KERN_INFO "%s() Bridge Debugging is enabled\n", |
| __func__); |
| |
| printk(KERN_INFO "au0828 driver loaded\n"); |
| |
| ret = usb_register(&au0828_usb_driver); |
| if (ret) |
| printk(KERN_ERR "usb_register failed, error = %d\n", ret); |
| |
| return ret; |
| } |
| |
| static void __exit au0828_exit(void) |
| { |
| usb_deregister(&au0828_usb_driver); |
| } |
| |
| module_init(au0828_init); |
| module_exit(au0828_exit); |
| |
| MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products"); |
| MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION("0.0.2"); |