| /* |
| * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * Common Codes for S5P64X0 machines |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/list.h> |
| #include <linux/timer.h> |
| #include <linux/init.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/device.h> |
| #include <linux/serial_core.h> |
| #include <linux/platform_device.h> |
| #include <linux/sched.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/gpio.h> |
| #include <linux/irq.h> |
| |
| #include <asm/irq.h> |
| #include <asm/proc-fns.h> |
| #include <asm/system_misc.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/irq.h> |
| |
| #include <mach/map.h> |
| #include <mach/hardware.h> |
| #include <mach/regs-clock.h> |
| #include <mach/regs-gpio.h> |
| |
| #include <plat/cpu.h> |
| #include <plat/clock.h> |
| #include <plat/devs.h> |
| #include <plat/pm.h> |
| #include <plat/sdhci.h> |
| #include <plat/adc-core.h> |
| #include <plat/fb-core.h> |
| #include <plat/spi-core.h> |
| #include <plat/gpio-cfg.h> |
| #include <plat/regs-irqtype.h> |
| #include <plat/regs-serial.h> |
| #include <plat/watchdog-reset.h> |
| |
| #include "common.h" |
| |
| static const char name_s5p6440[] = "S5P6440"; |
| static const char name_s5p6450[] = "S5P6450"; |
| |
| static struct cpu_table cpu_ids[] __initdata = { |
| { |
| .idcode = S5P6440_CPU_ID, |
| .idmask = S5P64XX_CPU_MASK, |
| .map_io = s5p6440_map_io, |
| .init_clocks = s5p6440_init_clocks, |
| .init_uarts = s5p6440_init_uarts, |
| .init = s5p64x0_init, |
| .name = name_s5p6440, |
| }, { |
| .idcode = S5P6450_CPU_ID, |
| .idmask = S5P64XX_CPU_MASK, |
| .map_io = s5p6450_map_io, |
| .init_clocks = s5p6450_init_clocks, |
| .init_uarts = s5p6450_init_uarts, |
| .init = s5p64x0_init, |
| .name = name_s5p6450, |
| }, |
| }; |
| |
| /* Initial IO mappings */ |
| |
| static struct map_desc s5p64x0_iodesc[] __initdata = { |
| { |
| .virtual = (unsigned long)S5P_VA_CHIPID, |
| .pfn = __phys_to_pfn(S5P64X0_PA_CHIPID), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_SYS, |
| .pfn = __phys_to_pfn(S5P64X0_PA_SYSCON), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_TIMER, |
| .pfn = __phys_to_pfn(S5P64X0_PA_TIMER), |
| .length = SZ_16K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_WATCHDOG, |
| .pfn = __phys_to_pfn(S5P64X0_PA_WDT), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_SROMC, |
| .pfn = __phys_to_pfn(S5P64X0_PA_SROMC), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_GPIO, |
| .pfn = __phys_to_pfn(S5P64X0_PA_GPIO), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)VA_VIC0, |
| .pfn = __phys_to_pfn(S5P64X0_PA_VIC0), |
| .length = SZ_16K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)VA_VIC1, |
| .pfn = __phys_to_pfn(S5P64X0_PA_VIC1), |
| .length = SZ_16K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static struct map_desc s5p6440_iodesc[] __initdata = { |
| { |
| .virtual = (unsigned long)S3C_VA_UART, |
| .pfn = __phys_to_pfn(S5P6440_PA_UART(0)), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static struct map_desc s5p6450_iodesc[] __initdata = { |
| { |
| .virtual = (unsigned long)S3C_VA_UART, |
| .pfn = __phys_to_pfn(S5P6450_PA_UART(0)), |
| .length = SZ_512K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_UART + SZ_512K, |
| .pfn = __phys_to_pfn(S5P6450_PA_UART(5)), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static void s5p64x0_idle(void) |
| { |
| unsigned long val; |
| |
| val = __raw_readl(S5P64X0_PWR_CFG); |
| val &= ~(0x3 << 5); |
| val |= (0x1 << 5); |
| __raw_writel(val, S5P64X0_PWR_CFG); |
| |
| cpu_do_idle(); |
| } |
| |
| /* |
| * s5p64x0_map_io |
| * |
| * register the standard CPU IO areas |
| */ |
| |
| void __init s5p64x0_init_io(struct map_desc *mach_desc, int size) |
| { |
| /* initialize the io descriptors we need for initialization */ |
| iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); |
| if (mach_desc) |
| iotable_init(mach_desc, size); |
| |
| /* detect cpu id and rev. */ |
| s5p_init_cpu(S5P64X0_SYS_ID); |
| |
| s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); |
| } |
| |
| void __init s5p6440_map_io(void) |
| { |
| /* initialize any device information early */ |
| s3c_adc_setname("s3c64xx-adc"); |
| s3c_fb_setname("s5p64x0-fb"); |
| s3c64xx_spi_setname("s5p64x0-spi"); |
| |
| s5p64x0_default_sdhci0(); |
| s5p64x0_default_sdhci1(); |
| s5p6440_default_sdhci2(); |
| |
| iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); |
| } |
| |
| void __init s5p6450_map_io(void) |
| { |
| /* initialize any device information early */ |
| s3c_adc_setname("s3c64xx-adc"); |
| s3c_fb_setname("s5p64x0-fb"); |
| s3c64xx_spi_setname("s5p64x0-spi"); |
| |
| s5p64x0_default_sdhci0(); |
| s5p64x0_default_sdhci1(); |
| s5p6450_default_sdhci2(); |
| |
| iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); |
| } |
| |
| /* |
| * s5p64x0_init_clocks |
| * |
| * register and setup the CPU clocks |
| */ |
| |
| void __init s5p6440_init_clocks(int xtal) |
| { |
| printk(KERN_DEBUG "%s: initializing clocks\n", __func__); |
| |
| s3c24xx_register_baseclocks(xtal); |
| s5p_register_clocks(xtal); |
| s5p6440_register_clocks(); |
| s5p6440_setup_clocks(); |
| } |
| |
| void __init s5p6450_init_clocks(int xtal) |
| { |
| printk(KERN_DEBUG "%s: initializing clocks\n", __func__); |
| |
| s3c24xx_register_baseclocks(xtal); |
| s5p_register_clocks(xtal); |
| s5p6450_register_clocks(); |
| s5p6450_setup_clocks(); |
| } |
| |
| /* |
| * s5p64x0_init_irq |
| * |
| * register the CPU interrupts |
| */ |
| |
| void __init s5p6440_init_irq(void) |
| { |
| /* S5P6440 supports 2 VIC */ |
| u32 vic[2]; |
| |
| /* |
| * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] |
| * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] |
| */ |
| vic[0] = 0xff800ae7; |
| vic[1] = 0xffbf23e5; |
| |
| s5p_init_irq(vic, ARRAY_SIZE(vic)); |
| } |
| |
| void __init s5p6450_init_irq(void) |
| { |
| /* S5P6450 supports only 2 VIC */ |
| u32 vic[2]; |
| |
| /* |
| * VIC0 is missing IRQ_VIC0[(13-15), (21-22)] |
| * VIC1 is missing IRQ VIC1[12, 14, 23] |
| */ |
| vic[0] = 0xff9f1fff; |
| vic[1] = 0xff7fafff; |
| |
| s5p_init_irq(vic, ARRAY_SIZE(vic)); |
| } |
| |
| struct bus_type s5p64x0_subsys = { |
| .name = "s5p64x0-core", |
| .dev_name = "s5p64x0-core", |
| }; |
| |
| static struct device s5p64x0_dev = { |
| .bus = &s5p64x0_subsys, |
| }; |
| |
| static int __init s5p64x0_core_init(void) |
| { |
| return subsys_system_register(&s5p64x0_subsys, NULL); |
| } |
| core_initcall(s5p64x0_core_init); |
| |
| int __init s5p64x0_init(void) |
| { |
| printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); |
| |
| /* set idle function */ |
| arm_pm_idle = s5p64x0_idle; |
| |
| return device_register(&s5p64x0_dev); |
| } |
| |
| /* uart registration process */ |
| void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) |
| { |
| int uart; |
| |
| for (uart = 0; uart < no; uart++) { |
| s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart); |
| s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART; |
| } |
| |
| s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); |
| } |
| |
| void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) |
| { |
| s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); |
| } |
| |
| #define eint_offset(irq) ((irq) - IRQ_EINT(0)) |
| |
| static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type) |
| { |
| int offs = eint_offset(data->irq); |
| int shift; |
| u32 ctrl, mask; |
| u32 newvalue = 0; |
| |
| if (offs > 15) |
| return -EINVAL; |
| |
| switch (type) { |
| case IRQ_TYPE_NONE: |
| printk(KERN_WARNING "No edge setting!\n"); |
| break; |
| case IRQ_TYPE_EDGE_RISING: |
| newvalue = S3C2410_EXTINT_RISEEDGE; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| newvalue = S3C2410_EXTINT_FALLEDGE; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: |
| newvalue = S3C2410_EXTINT_BOTHEDGE; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| newvalue = S3C2410_EXTINT_LOWLEV; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| newvalue = S3C2410_EXTINT_HILEV; |
| break; |
| default: |
| printk(KERN_ERR "No such irq type %d", type); |
| return -EINVAL; |
| } |
| |
| shift = (offs / 2) * 4; |
| mask = 0x7 << shift; |
| |
| ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask; |
| ctrl |= newvalue << shift; |
| __raw_writel(ctrl, S5P64X0_EINT0CON0); |
| |
| /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */ |
| if (soc_is_s5p6450()) |
| s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2)); |
| else |
| s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2)); |
| |
| return 0; |
| } |
| |
| /* |
| * s5p64x0_irq_demux_eint |
| * |
| * This function demuxes the IRQ from the group0 external interrupts, |
| * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into |
| * the specific handlers s5p64x0_irq_demux_eintX_Y. |
| */ |
| static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end) |
| { |
| u32 status = __raw_readl(S5P64X0_EINT0PEND); |
| u32 mask = __raw_readl(S5P64X0_EINT0MASK); |
| unsigned int irq; |
| |
| status &= ~mask; |
| status >>= start; |
| status &= (1 << (end - start + 1)) - 1; |
| |
| for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { |
| if (status & 1) |
| generic_handle_irq(irq); |
| status >>= 1; |
| } |
| } |
| |
| static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc) |
| { |
| s5p64x0_irq_demux_eint(0, 3); |
| } |
| |
| static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc) |
| { |
| s5p64x0_irq_demux_eint(4, 11); |
| } |
| |
| static void s5p64x0_irq_demux_eint12_15(unsigned int irq, |
| struct irq_desc *desc) |
| { |
| s5p64x0_irq_demux_eint(12, 15); |
| } |
| |
| static int s5p64x0_alloc_gc(void) |
| { |
| struct irq_chip_generic *gc; |
| struct irq_chip_type *ct; |
| |
| gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE, |
| S5P_VA_GPIO, handle_level_irq); |
| if (!gc) { |
| printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0" |
| "external interrupts failed\n", __func__); |
| return -EINVAL; |
| } |
| |
| ct = gc->chip_types; |
| ct->chip.irq_ack = irq_gc_ack_set_bit; |
| ct->chip.irq_mask = irq_gc_mask_set_bit; |
| ct->chip.irq_unmask = irq_gc_mask_clr_bit; |
| ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; |
| ct->chip.irq_set_wake = s3c_irqext_wake; |
| ct->regs.ack = EINT0PEND_OFFSET; |
| ct->regs.mask = EINT0MASK_OFFSET; |
| irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE, |
| IRQ_NOREQUEST | IRQ_NOPROBE, 0); |
| return 0; |
| } |
| |
| static int __init s5p64x0_init_irq_eint(void) |
| { |
| int ret = s5p64x0_alloc_gc(); |
| irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3); |
| irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11); |
| irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15); |
| |
| return ret; |
| } |
| arch_initcall(s5p64x0_init_irq_eint); |
| |
| void s5p64x0_restart(char mode, const char *cmd) |
| { |
| if (mode != 's') |
| arch_wdt_reset(); |
| |
| soft_restart(0); |
| } |