| /* |
| * drivers/ata/pata_mpc52xx.c |
| * |
| * libata driver for the Freescale MPC52xx on-chip IDE interface |
| * |
| * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com> |
| * Copyright (C) 2003 Mipsys - Benjamin Herrenschmidt |
| * |
| * UDMA support based on patches by Freescale (Bernard Kuhn, John Rigby), |
| * Domen Puncer and Tim Yamin. |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/gfp.h> |
| #include <linux/delay.h> |
| #include <linux/libata.h> |
| #include <linux/of_platform.h> |
| #include <linux/types.h> |
| |
| #include <asm/cacheflush.h> |
| #include <asm/prom.h> |
| #include <asm/mpc52xx.h> |
| |
| #include <sysdev/bestcomm/bestcomm.h> |
| #include <sysdev/bestcomm/bestcomm_priv.h> |
| #include <sysdev/bestcomm/ata.h> |
| |
| #define DRV_NAME "mpc52xx_ata" |
| |
| /* Private structures used by the driver */ |
| struct mpc52xx_ata_timings { |
| u32 pio1; |
| u32 pio2; |
| u32 mdma1; |
| u32 mdma2; |
| u32 udma1; |
| u32 udma2; |
| u32 udma3; |
| u32 udma4; |
| u32 udma5; |
| int using_udma; |
| }; |
| |
| struct mpc52xx_ata_priv { |
| unsigned int ipb_period; |
| struct mpc52xx_ata __iomem *ata_regs; |
| phys_addr_t ata_regs_pa; |
| int ata_irq; |
| struct mpc52xx_ata_timings timings[2]; |
| int csel; |
| |
| /* DMA */ |
| struct bcom_task *dmatsk; |
| const struct udmaspec *udmaspec; |
| const struct mdmaspec *mdmaspec; |
| int mpc52xx_ata_dma_last_write; |
| int waiting_for_dma; |
| }; |
| |
| |
| /* ATAPI-4 PIO specs (in ns) */ |
| static const u16 ataspec_t0[5] = {600, 383, 240, 180, 120}; |
| static const u16 ataspec_t1[5] = { 70, 50, 30, 30, 25}; |
| static const u16 ataspec_t2_8[5] = {290, 290, 290, 80, 70}; |
| static const u16 ataspec_t2_16[5] = {165, 125, 100, 80, 70}; |
| static const u16 ataspec_t2i[5] = { 0, 0, 0, 70, 25}; |
| static const u16 ataspec_t4[5] = { 30, 20, 15, 10, 10}; |
| static const u16 ataspec_ta[5] = { 35, 35, 35, 35, 35}; |
| |
| #define CALC_CLKCYC(c,v) ((((v)+(c)-1)/(c))) |
| |
| /* ======================================================================== */ |
| |
| /* ATAPI-4 MDMA specs (in clocks) */ |
| struct mdmaspec { |
| u8 t0M; |
| u8 td; |
| u8 th; |
| u8 tj; |
| u8 tkw; |
| u8 tm; |
| u8 tn; |
| }; |
| |
| static const struct mdmaspec mdmaspec66[3] = { |
| { .t0M = 32, .td = 15, .th = 2, .tj = 2, .tkw = 15, .tm = 4, .tn = 1 }, |
| { .t0M = 10, .td = 6, .th = 1, .tj = 1, .tkw = 4, .tm = 2, .tn = 1 }, |
| { .t0M = 8, .td = 5, .th = 1, .tj = 1, .tkw = 2, .tm = 2, .tn = 1 }, |
| }; |
| |
| static const struct mdmaspec mdmaspec132[3] = { |
| { .t0M = 64, .td = 29, .th = 3, .tj = 3, .tkw = 29, .tm = 7, .tn = 2 }, |
| { .t0M = 20, .td = 11, .th = 2, .tj = 1, .tkw = 7, .tm = 4, .tn = 1 }, |
| { .t0M = 16, .td = 10, .th = 2, .tj = 1, .tkw = 4, .tm = 4, .tn = 1 }, |
| }; |
| |
| /* ATAPI-4 UDMA specs (in clocks) */ |
| struct udmaspec { |
| u8 tcyc; |
| u8 t2cyc; |
| u8 tds; |
| u8 tdh; |
| u8 tdvs; |
| u8 tdvh; |
| u8 tfs; |
| u8 tli; |
| u8 tmli; |
| u8 taz; |
| u8 tzah; |
| u8 tenv; |
| u8 tsr; |
| u8 trfs; |
| u8 trp; |
| u8 tack; |
| u8 tss; |
| }; |
| |
| static const struct udmaspec udmaspec66[6] = { |
| { .tcyc = 8, .t2cyc = 16, .tds = 1, .tdh = 1, .tdvs = 5, .tdvh = 1, |
| .tfs = 16, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, |
| .tsr = 3, .trfs = 5, .trp = 11, .tack = 2, .tss = 4, |
| }, |
| { .tcyc = 5, .t2cyc = 11, .tds = 1, .tdh = 1, .tdvs = 4, .tdvh = 1, |
| .tfs = 14, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, |
| .tsr = 2, .trfs = 5, .trp = 9, .tack = 2, .tss = 4, |
| }, |
| { .tcyc = 4, .t2cyc = 8, .tds = 1, .tdh = 1, .tdvs = 3, .tdvh = 1, |
| .tfs = 12, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, |
| .tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4, |
| }, |
| { .tcyc = 3, .t2cyc = 6, .tds = 1, .tdh = 1, .tdvs = 2, .tdvh = 1, |
| .tfs = 9, .tli = 7, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, |
| .tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4, |
| }, |
| { .tcyc = 2, .t2cyc = 4, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1, |
| .tfs = 8, .tli = 8, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, |
| .tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4, |
| }, |
| { .tcyc = 2, .t2cyc = 2, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1, |
| .tfs = 6, .tli = 5, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, |
| .tsr = 2, .trfs = 4, .trp = 6, .tack = 2, .tss = 4, |
| }, |
| }; |
| |
| static const struct udmaspec udmaspec132[6] = { |
| { .tcyc = 15, .t2cyc = 31, .tds = 2, .tdh = 1, .tdvs = 10, .tdvh = 1, |
| .tfs = 30, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, |
| .tsr = 7, .trfs = 10, .trp = 22, .tack = 3, .tss = 7, |
| }, |
| { .tcyc = 10, .t2cyc = 21, .tds = 2, .tdh = 1, .tdvs = 7, .tdvh = 1, |
| .tfs = 27, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, |
| .tsr = 4, .trfs = 10, .trp = 17, .tack = 3, .tss = 7, |
| }, |
| { .tcyc = 6, .t2cyc = 12, .tds = 1, .tdh = 1, .tdvs = 5, .tdvh = 1, |
| .tfs = 23, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, |
| .tsr = 3, .trfs = 8, .trp = 14, .tack = 3, .tss = 7, |
| }, |
| { .tcyc = 7, .t2cyc = 12, .tds = 1, .tdh = 1, .tdvs = 3, .tdvh = 1, |
| .tfs = 15, .tli = 13, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, |
| .tsr = 3, .trfs = 8, .trp = 14, .tack = 3, .tss = 7, |
| }, |
| { .tcyc = 2, .t2cyc = 5, .tds = 0, .tdh = 0, .tdvs = 1, .tdvh = 1, |
| .tfs = 16, .tli = 14, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, |
| .tsr = 2, .trfs = 7, .trp = 13, .tack = 2, .tss = 6, |
| }, |
| { .tcyc = 3, .t2cyc = 6, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1, |
| .tfs = 12, .tli = 10, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, |
| .tsr = 3, .trfs = 7, .trp = 12, .tack = 3, .tss = 7, |
| }, |
| }; |
| |
| /* ======================================================================== */ |
| |
| /* Bit definitions inside the registers */ |
| #define MPC52xx_ATA_HOSTCONF_SMR 0x80000000UL /* State machine reset */ |
| #define MPC52xx_ATA_HOSTCONF_FR 0x40000000UL /* FIFO Reset */ |
| #define MPC52xx_ATA_HOSTCONF_IE 0x02000000UL /* Enable interrupt in PIO */ |
| #define MPC52xx_ATA_HOSTCONF_IORDY 0x01000000UL /* Drive supports IORDY protocol */ |
| |
| #define MPC52xx_ATA_HOSTSTAT_TIP 0x80000000UL /* Transaction in progress */ |
| #define MPC52xx_ATA_HOSTSTAT_UREP 0x40000000UL /* UDMA Read Extended Pause */ |
| #define MPC52xx_ATA_HOSTSTAT_RERR 0x02000000UL /* Read Error */ |
| #define MPC52xx_ATA_HOSTSTAT_WERR 0x01000000UL /* Write Error */ |
| |
| #define MPC52xx_ATA_FIFOSTAT_EMPTY 0x01 /* FIFO Empty */ |
| #define MPC52xx_ATA_FIFOSTAT_ERROR 0x40 /* FIFO Error */ |
| |
| #define MPC52xx_ATA_DMAMODE_WRITE 0x01 /* Write DMA */ |
| #define MPC52xx_ATA_DMAMODE_READ 0x02 /* Read DMA */ |
| #define MPC52xx_ATA_DMAMODE_UDMA 0x04 /* UDMA enabled */ |
| #define MPC52xx_ATA_DMAMODE_IE 0x08 /* Enable drive interrupt to CPU in DMA mode */ |
| #define MPC52xx_ATA_DMAMODE_FE 0x10 /* FIFO Flush enable in Rx mode */ |
| #define MPC52xx_ATA_DMAMODE_FR 0x20 /* FIFO Reset */ |
| #define MPC52xx_ATA_DMAMODE_HUT 0x40 /* Host UDMA burst terminate */ |
| |
| #define MAX_DMA_BUFFERS 128 |
| #define MAX_DMA_BUFFER_SIZE 0x20000u |
| |
| /* Structure of the hardware registers */ |
| struct mpc52xx_ata { |
| |
| /* Host interface registers */ |
| u32 config; /* ATA + 0x00 Host configuration */ |
| u32 host_status; /* ATA + 0x04 Host controller status */ |
| u32 pio1; /* ATA + 0x08 PIO Timing 1 */ |
| u32 pio2; /* ATA + 0x0c PIO Timing 2 */ |
| u32 mdma1; /* ATA + 0x10 MDMA Timing 1 */ |
| u32 mdma2; /* ATA + 0x14 MDMA Timing 2 */ |
| u32 udma1; /* ATA + 0x18 UDMA Timing 1 */ |
| u32 udma2; /* ATA + 0x1c UDMA Timing 2 */ |
| u32 udma3; /* ATA + 0x20 UDMA Timing 3 */ |
| u32 udma4; /* ATA + 0x24 UDMA Timing 4 */ |
| u32 udma5; /* ATA + 0x28 UDMA Timing 5 */ |
| u32 share_cnt; /* ATA + 0x2c ATA share counter */ |
| u32 reserved0[3]; |
| |
| /* FIFO registers */ |
| u32 fifo_data; /* ATA + 0x3c */ |
| u8 fifo_status_frame; /* ATA + 0x40 */ |
| u8 fifo_status; /* ATA + 0x41 */ |
| u16 reserved7[1]; |
| u8 fifo_control; /* ATA + 0x44 */ |
| u8 reserved8[5]; |
| u16 fifo_alarm; /* ATA + 0x4a */ |
| u16 reserved9; |
| u16 fifo_rdp; /* ATA + 0x4e */ |
| u16 reserved10; |
| u16 fifo_wrp; /* ATA + 0x52 */ |
| u16 reserved11; |
| u16 fifo_lfrdp; /* ATA + 0x56 */ |
| u16 reserved12; |
| u16 fifo_lfwrp; /* ATA + 0x5a */ |
| |
| /* Drive TaskFile registers */ |
| u8 tf_control; /* ATA + 0x5c TASKFILE Control/Alt Status */ |
| u8 reserved13[3]; |
| u16 tf_data; /* ATA + 0x60 TASKFILE Data */ |
| u16 reserved14; |
| u8 tf_features; /* ATA + 0x64 TASKFILE Features/Error */ |
| u8 reserved15[3]; |
| u8 tf_sec_count; /* ATA + 0x68 TASKFILE Sector Count */ |
| u8 reserved16[3]; |
| u8 tf_sec_num; /* ATA + 0x6c TASKFILE Sector Number */ |
| u8 reserved17[3]; |
| u8 tf_cyl_low; /* ATA + 0x70 TASKFILE Cylinder Low */ |
| u8 reserved18[3]; |
| u8 tf_cyl_high; /* ATA + 0x74 TASKFILE Cylinder High */ |
| u8 reserved19[3]; |
| u8 tf_dev_head; /* ATA + 0x78 TASKFILE Device/Head */ |
| u8 reserved20[3]; |
| u8 tf_command; /* ATA + 0x7c TASKFILE Command/Status */ |
| u8 dma_mode; /* ATA + 0x7d ATA Host DMA Mode configuration */ |
| u8 reserved21[2]; |
| }; |
| |
| |
| /* ======================================================================== */ |
| /* Aux fns */ |
| /* ======================================================================== */ |
| |
| |
| /* MPC52xx low level hw control */ |
| static int |
| mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio) |
| { |
| struct mpc52xx_ata_timings *timing = &priv->timings[dev]; |
| unsigned int ipb_period = priv->ipb_period; |
| u32 t0, t1, t2_8, t2_16, t2i, t4, ta; |
| |
| if ((pio < 0) || (pio > 4)) |
| return -EINVAL; |
| |
| t0 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t0[pio]); |
| t1 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t1[pio]); |
| t2_8 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2_8[pio]); |
| t2_16 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2_16[pio]); |
| t2i = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2i[pio]); |
| t4 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t4[pio]); |
| ta = CALC_CLKCYC(ipb_period, 1000 * ataspec_ta[pio]); |
| |
| timing->pio1 = (t0 << 24) | (t2_8 << 16) | (t2_16 << 8) | (t2i); |
| timing->pio2 = (t4 << 24) | (t1 << 16) | (ta << 8); |
| |
| return 0; |
| } |
| |
| static int |
| mpc52xx_ata_compute_mdma_timings(struct mpc52xx_ata_priv *priv, int dev, |
| int speed) |
| { |
| struct mpc52xx_ata_timings *t = &priv->timings[dev]; |
| const struct mdmaspec *s = &priv->mdmaspec[speed]; |
| |
| if (speed < 0 || speed > 2) |
| return -EINVAL; |
| |
| t->mdma1 = ((u32)s->t0M << 24) | ((u32)s->td << 16) | ((u32)s->tkw << 8) | s->tm; |
| t->mdma2 = ((u32)s->th << 24) | ((u32)s->tj << 16) | ((u32)s->tn << 8); |
| t->using_udma = 0; |
| |
| return 0; |
| } |
| |
| static int |
| mpc52xx_ata_compute_udma_timings(struct mpc52xx_ata_priv *priv, int dev, |
| int speed) |
| { |
| struct mpc52xx_ata_timings *t = &priv->timings[dev]; |
| const struct udmaspec *s = &priv->udmaspec[speed]; |
| |
| if (speed < 0 || speed > 2) |
| return -EINVAL; |
| |
| t->udma1 = ((u32)s->t2cyc << 24) | ((u32)s->tcyc << 16) | ((u32)s->tds << 8) | s->tdh; |
| t->udma2 = ((u32)s->tdvs << 24) | ((u32)s->tdvh << 16) | ((u32)s->tfs << 8) | s->tli; |
| t->udma3 = ((u32)s->tmli << 24) | ((u32)s->taz << 16) | ((u32)s->tenv << 8) | s->tsr; |
| t->udma4 = ((u32)s->tss << 24) | ((u32)s->trfs << 16) | ((u32)s->trp << 8) | s->tack; |
| t->udma5 = (u32)s->tzah << 24; |
| t->using_udma = 1; |
| |
| return 0; |
| } |
| |
| static void |
| mpc52xx_ata_apply_timings(struct mpc52xx_ata_priv *priv, int device) |
| { |
| struct mpc52xx_ata __iomem *regs = priv->ata_regs; |
| struct mpc52xx_ata_timings *timing = &priv->timings[device]; |
| |
| out_be32(®s->pio1, timing->pio1); |
| out_be32(®s->pio2, timing->pio2); |
| out_be32(®s->mdma1, timing->mdma1); |
| out_be32(®s->mdma2, timing->mdma2); |
| out_be32(®s->udma1, timing->udma1); |
| out_be32(®s->udma2, timing->udma2); |
| out_be32(®s->udma3, timing->udma3); |
| out_be32(®s->udma4, timing->udma4); |
| out_be32(®s->udma5, timing->udma5); |
| priv->csel = device; |
| } |
| |
| static int |
| mpc52xx_ata_hw_init(struct mpc52xx_ata_priv *priv) |
| { |
| struct mpc52xx_ata __iomem *regs = priv->ata_regs; |
| int tslot; |
| |
| /* Clear share_cnt (all sample code do this ...) */ |
| out_be32(®s->share_cnt, 0); |
| |
| /* Configure and reset host */ |
| out_be32(®s->config, |
| MPC52xx_ATA_HOSTCONF_IE | |
| MPC52xx_ATA_HOSTCONF_IORDY | |
| MPC52xx_ATA_HOSTCONF_SMR | |
| MPC52xx_ATA_HOSTCONF_FR); |
| |
| udelay(10); |
| |
| out_be32(®s->config, |
| MPC52xx_ATA_HOSTCONF_IE | |
| MPC52xx_ATA_HOSTCONF_IORDY); |
| |
| /* Set the time slot to 1us */ |
| tslot = CALC_CLKCYC(priv->ipb_period, 1000000); |
| out_be32(®s->share_cnt, tslot << 16); |
| |
| /* Init timings to PIO0 */ |
| memset(priv->timings, 0x00, 2*sizeof(struct mpc52xx_ata_timings)); |
| |
| mpc52xx_ata_compute_pio_timings(priv, 0, 0); |
| mpc52xx_ata_compute_pio_timings(priv, 1, 0); |
| |
| mpc52xx_ata_apply_timings(priv, 0); |
| |
| return 0; |
| } |
| |
| |
| /* ======================================================================== */ |
| /* libata driver */ |
| /* ======================================================================== */ |
| |
| static void |
| mpc52xx_ata_set_piomode(struct ata_port *ap, struct ata_device *adev) |
| { |
| struct mpc52xx_ata_priv *priv = ap->host->private_data; |
| int pio, rv; |
| |
| pio = adev->pio_mode - XFER_PIO_0; |
| |
| rv = mpc52xx_ata_compute_pio_timings(priv, adev->devno, pio); |
| |
| if (rv) { |
| dev_err(ap->dev, "error: invalid PIO mode: %d\n", pio); |
| return; |
| } |
| |
| mpc52xx_ata_apply_timings(priv, adev->devno); |
| } |
| |
| static void |
| mpc52xx_ata_set_dmamode(struct ata_port *ap, struct ata_device *adev) |
| { |
| struct mpc52xx_ata_priv *priv = ap->host->private_data; |
| int rv; |
| |
| if (adev->dma_mode >= XFER_UDMA_0) { |
| int dma = adev->dma_mode - XFER_UDMA_0; |
| rv = mpc52xx_ata_compute_udma_timings(priv, adev->devno, dma); |
| } else { |
| int dma = adev->dma_mode - XFER_MW_DMA_0; |
| rv = mpc52xx_ata_compute_mdma_timings(priv, adev->devno, dma); |
| } |
| |
| if (rv) { |
| dev_alert(ap->dev, |
| "Trying to select invalid DMA mode %d\n", |
| adev->dma_mode); |
| return; |
| } |
| |
| mpc52xx_ata_apply_timings(priv, adev->devno); |
| } |
| |
| static void |
| mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device) |
| { |
| struct mpc52xx_ata_priv *priv = ap->host->private_data; |
| |
| if (device != priv->csel) |
| mpc52xx_ata_apply_timings(priv, device); |
| |
| ata_sff_dev_select(ap, device); |
| } |
| |
| static int |
| mpc52xx_ata_build_dmatable(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| struct mpc52xx_ata_priv *priv = ap->host->private_data; |
| struct bcom_ata_bd *bd; |
| unsigned int read = !(qc->tf.flags & ATA_TFLAG_WRITE), si; |
| struct scatterlist *sg; |
| int count = 0; |
| |
| if (read) |
| bcom_ata_rx_prepare(priv->dmatsk); |
| else |
| bcom_ata_tx_prepare(priv->dmatsk); |
| |
| for_each_sg(qc->sg, sg, qc->n_elem, si) { |
| dma_addr_t cur_addr = sg_dma_address(sg); |
| u32 cur_len = sg_dma_len(sg); |
| |
| while (cur_len) { |
| unsigned int tc = min(cur_len, MAX_DMA_BUFFER_SIZE); |
| bd = (struct bcom_ata_bd *) |
| bcom_prepare_next_buffer(priv->dmatsk); |
| |
| if (read) { |
| bd->status = tc; |
| bd->src_pa = (__force u32) priv->ata_regs_pa + |
| offsetof(struct mpc52xx_ata, fifo_data); |
| bd->dst_pa = (__force u32) cur_addr; |
| } else { |
| bd->status = tc; |
| bd->src_pa = (__force u32) cur_addr; |
| bd->dst_pa = (__force u32) priv->ata_regs_pa + |
| offsetof(struct mpc52xx_ata, fifo_data); |
| } |
| |
| bcom_submit_next_buffer(priv->dmatsk, NULL); |
| |
| cur_addr += tc; |
| cur_len -= tc; |
| count++; |
| |
| if (count > MAX_DMA_BUFFERS) { |
| dev_alert(ap->dev, "dma table" |
| "too small\n"); |
| goto use_pio_instead; |
| } |
| } |
| } |
| return 1; |
| |
| use_pio_instead: |
| bcom_ata_reset_bd(priv->dmatsk); |
| return 0; |
| } |
| |
| static void |
| mpc52xx_bmdma_setup(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| struct mpc52xx_ata_priv *priv = ap->host->private_data; |
| struct mpc52xx_ata __iomem *regs = priv->ata_regs; |
| |
| unsigned int read = !(qc->tf.flags & ATA_TFLAG_WRITE); |
| u8 dma_mode; |
| |
| if (!mpc52xx_ata_build_dmatable(qc)) |
| dev_alert(ap->dev, "%s: %i, return 1?\n", |
| __func__, __LINE__); |
| |
| /* Check FIFO is OK... */ |
| if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR) |
| dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n", |
| __func__, in_8(&priv->ata_regs->fifo_status)); |
| |
| if (read) { |
| dma_mode = MPC52xx_ATA_DMAMODE_IE | MPC52xx_ATA_DMAMODE_READ | |
| MPC52xx_ATA_DMAMODE_FE; |
| |
| /* Setup FIFO if direction changed */ |
| if (priv->mpc52xx_ata_dma_last_write != 0) { |
| priv->mpc52xx_ata_dma_last_write = 0; |
| |
| /* Configure FIFO with granularity to 7 */ |
| out_8(®s->fifo_control, 7); |
| out_be16(®s->fifo_alarm, 128); |
| |
| /* Set FIFO Reset bit (FR) */ |
| out_8(®s->dma_mode, MPC52xx_ATA_DMAMODE_FR); |
| } |
| } else { |
| dma_mode = MPC52xx_ATA_DMAMODE_IE | MPC52xx_ATA_DMAMODE_WRITE; |
| |
| /* Setup FIFO if direction changed */ |
| if (priv->mpc52xx_ata_dma_last_write != 1) { |
| priv->mpc52xx_ata_dma_last_write = 1; |
| |
| /* Configure FIFO with granularity to 4 */ |
| out_8(®s->fifo_control, 4); |
| out_be16(®s->fifo_alarm, 128); |
| } |
| } |
| |
| if (priv->timings[qc->dev->devno].using_udma) |
| dma_mode |= MPC52xx_ATA_DMAMODE_UDMA; |
| |
| out_8(®s->dma_mode, dma_mode); |
| priv->waiting_for_dma = ATA_DMA_ACTIVE; |
| |
| ata_wait_idle(ap); |
| ap->ops->sff_exec_command(ap, &qc->tf); |
| } |
| |
| static void |
| mpc52xx_bmdma_start(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| struct mpc52xx_ata_priv *priv = ap->host->private_data; |
| |
| bcom_set_task_auto_start(priv->dmatsk->tasknum, priv->dmatsk->tasknum); |
| bcom_enable(priv->dmatsk); |
| } |
| |
| static void |
| mpc52xx_bmdma_stop(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| struct mpc52xx_ata_priv *priv = ap->host->private_data; |
| |
| bcom_disable(priv->dmatsk); |
| bcom_ata_reset_bd(priv->dmatsk); |
| priv->waiting_for_dma = 0; |
| |
| /* Check FIFO is OK... */ |
| if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR) |
| dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n", |
| __func__, in_8(&priv->ata_regs->fifo_status)); |
| } |
| |
| static u8 |
| mpc52xx_bmdma_status(struct ata_port *ap) |
| { |
| struct mpc52xx_ata_priv *priv = ap->host->private_data; |
| |
| /* Check FIFO is OK... */ |
| if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR) { |
| dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n", |
| __func__, in_8(&priv->ata_regs->fifo_status)); |
| return priv->waiting_for_dma | ATA_DMA_ERR; |
| } |
| |
| return priv->waiting_for_dma; |
| } |
| |
| static irqreturn_t |
| mpc52xx_ata_task_irq(int irq, void *vpriv) |
| { |
| struct mpc52xx_ata_priv *priv = vpriv; |
| while (bcom_buffer_done(priv->dmatsk)) |
| bcom_retrieve_buffer(priv->dmatsk, NULL, NULL); |
| |
| priv->waiting_for_dma |= ATA_DMA_INTR; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct scsi_host_template mpc52xx_ata_sht = { |
| ATA_PIO_SHT(DRV_NAME), |
| }; |
| |
| static struct ata_port_operations mpc52xx_ata_port_ops = { |
| .inherits = &ata_bmdma_port_ops, |
| .sff_dev_select = mpc52xx_ata_dev_select, |
| .set_piomode = mpc52xx_ata_set_piomode, |
| .set_dmamode = mpc52xx_ata_set_dmamode, |
| .bmdma_setup = mpc52xx_bmdma_setup, |
| .bmdma_start = mpc52xx_bmdma_start, |
| .bmdma_stop = mpc52xx_bmdma_stop, |
| .bmdma_status = mpc52xx_bmdma_status, |
| .qc_prep = ata_noop_qc_prep, |
| }; |
| |
| static int mpc52xx_ata_init_one(struct device *dev, |
| struct mpc52xx_ata_priv *priv, |
| unsigned long raw_ata_regs, |
| int mwdma_mask, int udma_mask) |
| { |
| struct ata_host *host; |
| struct ata_port *ap; |
| struct ata_ioports *aio; |
| |
| host = ata_host_alloc(dev, 1); |
| if (!host) |
| return -ENOMEM; |
| |
| ap = host->ports[0]; |
| ap->flags |= ATA_FLAG_SLAVE_POSS; |
| ap->pio_mask = ATA_PIO4; |
| ap->mwdma_mask = mwdma_mask; |
| ap->udma_mask = udma_mask; |
| ap->ops = &mpc52xx_ata_port_ops; |
| host->private_data = priv; |
| |
| aio = &ap->ioaddr; |
| aio->cmd_addr = NULL; /* Don't have a classic reg block */ |
| aio->altstatus_addr = &priv->ata_regs->tf_control; |
| aio->ctl_addr = &priv->ata_regs->tf_control; |
| aio->data_addr = &priv->ata_regs->tf_data; |
| aio->error_addr = &priv->ata_regs->tf_features; |
| aio->feature_addr = &priv->ata_regs->tf_features; |
| aio->nsect_addr = &priv->ata_regs->tf_sec_count; |
| aio->lbal_addr = &priv->ata_regs->tf_sec_num; |
| aio->lbam_addr = &priv->ata_regs->tf_cyl_low; |
| aio->lbah_addr = &priv->ata_regs->tf_cyl_high; |
| aio->device_addr = &priv->ata_regs->tf_dev_head; |
| aio->status_addr = &priv->ata_regs->tf_command; |
| aio->command_addr = &priv->ata_regs->tf_command; |
| |
| ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs); |
| |
| /* activate host */ |
| return ata_host_activate(host, priv->ata_irq, ata_bmdma_interrupt, 0, |
| &mpc52xx_ata_sht); |
| } |
| |
| /* ======================================================================== */ |
| /* OF Platform driver */ |
| /* ======================================================================== */ |
| |
| static int mpc52xx_ata_probe(struct platform_device *op) |
| { |
| unsigned int ipb_freq; |
| struct resource res_mem; |
| int ata_irq = 0; |
| struct mpc52xx_ata __iomem *ata_regs; |
| struct mpc52xx_ata_priv *priv = NULL; |
| int rv, task_irq; |
| int mwdma_mask = 0, udma_mask = 0; |
| const __be32 *prop; |
| int proplen; |
| struct bcom_task *dmatsk; |
| |
| /* Get ipb frequency */ |
| ipb_freq = mpc5xxx_get_bus_frequency(op->dev.of_node); |
| if (!ipb_freq) { |
| dev_err(&op->dev, "could not determine IPB bus frequency\n"); |
| return -ENODEV; |
| } |
| |
| /* Get device base address from device tree, request the region |
| * and ioremap it. */ |
| rv = of_address_to_resource(op->dev.of_node, 0, &res_mem); |
| if (rv) { |
| dev_err(&op->dev, "could not determine device base address\n"); |
| return rv; |
| } |
| |
| if (!devm_request_mem_region(&op->dev, res_mem.start, |
| sizeof(*ata_regs), DRV_NAME)) { |
| dev_err(&op->dev, "error requesting register region\n"); |
| return -EBUSY; |
| } |
| |
| ata_regs = devm_ioremap(&op->dev, res_mem.start, sizeof(*ata_regs)); |
| if (!ata_regs) { |
| dev_err(&op->dev, "error mapping device registers\n"); |
| return -ENOMEM; |
| } |
| |
| /* |
| * By default, all DMA modes are disabled for the MPC5200. Some |
| * boards don't have the required signals routed to make DMA work. |
| * Also, the MPC5200B has a silicon bug that causes data corruption |
| * with UDMA if it is used at the same time as the LocalPlus bus. |
| * |
| * Instead of trying to guess what modes are usable, check the |
| * ATA device tree node to find out what DMA modes work on the board. |
| * UDMA/MWDMA modes can also be forced by adding "libata.force=<mode>" |
| * to the kernel boot parameters. |
| * |
| * The MPC5200 ATA controller supports MWDMA modes 0, 1 and 2 and |
| * UDMA modes 0, 1 and 2. |
| */ |
| prop = of_get_property(op->dev.of_node, "mwdma-mode", &proplen); |
| if ((prop) && (proplen >= 4)) |
| mwdma_mask = ATA_MWDMA2 & ((1 << (*prop + 1)) - 1); |
| prop = of_get_property(op->dev.of_node, "udma-mode", &proplen); |
| if ((prop) && (proplen >= 4)) |
| udma_mask = ATA_UDMA2 & ((1 << (*prop + 1)) - 1); |
| |
| ata_irq = irq_of_parse_and_map(op->dev.of_node, 0); |
| if (ata_irq == NO_IRQ) { |
| dev_err(&op->dev, "error mapping irq\n"); |
| return -EINVAL; |
| } |
| |
| /* Prepare our private structure */ |
| priv = devm_kzalloc(&op->dev, sizeof(*priv), GFP_ATOMIC); |
| if (!priv) { |
| dev_err(&op->dev, "error allocating private structure\n"); |
| rv = -ENOMEM; |
| goto err1; |
| } |
| |
| priv->ipb_period = 1000000000 / (ipb_freq / 1000); |
| priv->ata_regs = ata_regs; |
| priv->ata_regs_pa = res_mem.start; |
| priv->ata_irq = ata_irq; |
| priv->csel = -1; |
| priv->mpc52xx_ata_dma_last_write = -1; |
| |
| if (ipb_freq/1000000 == 66) { |
| priv->mdmaspec = mdmaspec66; |
| priv->udmaspec = udmaspec66; |
| } else { |
| priv->mdmaspec = mdmaspec132; |
| priv->udmaspec = udmaspec132; |
| } |
| |
| /* Allocate a BestComm task for DMA */ |
| dmatsk = bcom_ata_init(MAX_DMA_BUFFERS, MAX_DMA_BUFFER_SIZE); |
| if (!dmatsk) { |
| dev_err(&op->dev, "bestcomm initialization failed\n"); |
| rv = -ENOMEM; |
| goto err1; |
| } |
| |
| task_irq = bcom_get_task_irq(dmatsk); |
| rv = devm_request_irq(&op->dev, task_irq, &mpc52xx_ata_task_irq, 0, |
| "ATA task", priv); |
| if (rv) { |
| dev_err(&op->dev, "error requesting DMA IRQ\n"); |
| goto err2; |
| } |
| priv->dmatsk = dmatsk; |
| |
| /* Init the hw */ |
| rv = mpc52xx_ata_hw_init(priv); |
| if (rv) { |
| dev_err(&op->dev, "error initializing hardware\n"); |
| goto err2; |
| } |
| |
| /* Register ourselves to libata */ |
| rv = mpc52xx_ata_init_one(&op->dev, priv, res_mem.start, |
| mwdma_mask, udma_mask); |
| if (rv) { |
| dev_err(&op->dev, "error registering with ATA layer\n"); |
| goto err2; |
| } |
| |
| return 0; |
| |
| err2: |
| irq_dispose_mapping(task_irq); |
| bcom_ata_release(dmatsk); |
| err1: |
| irq_dispose_mapping(ata_irq); |
| return rv; |
| } |
| |
| static int |
| mpc52xx_ata_remove(struct platform_device *op) |
| { |
| struct ata_host *host = platform_get_drvdata(op); |
| struct mpc52xx_ata_priv *priv = host->private_data; |
| int task_irq; |
| |
| /* Deregister the ATA interface */ |
| ata_platform_remove_one(op); |
| |
| /* Clean up DMA */ |
| task_irq = bcom_get_task_irq(priv->dmatsk); |
| irq_dispose_mapping(task_irq); |
| bcom_ata_release(priv->dmatsk); |
| irq_dispose_mapping(priv->ata_irq); |
| |
| return 0; |
| } |
| |
| |
| #ifdef CONFIG_PM |
| |
| static int |
| mpc52xx_ata_suspend(struct platform_device *op, pm_message_t state) |
| { |
| struct ata_host *host = dev_get_drvdata(&op->dev); |
| |
| return ata_host_suspend(host, state); |
| } |
| |
| static int |
| mpc52xx_ata_resume(struct platform_device *op) |
| { |
| struct ata_host *host = dev_get_drvdata(&op->dev); |
| struct mpc52xx_ata_priv *priv = host->private_data; |
| int rv; |
| |
| rv = mpc52xx_ata_hw_init(priv); |
| if (rv) { |
| dev_err(host->dev, "error initializing hardware\n"); |
| return rv; |
| } |
| |
| ata_host_resume(host); |
| |
| return 0; |
| } |
| |
| #endif |
| |
| |
| static struct of_device_id mpc52xx_ata_of_match[] = { |
| { .compatible = "fsl,mpc5200-ata", }, |
| { .compatible = "mpc5200-ata", }, |
| {}, |
| }; |
| |
| |
| static struct platform_driver mpc52xx_ata_of_platform_driver = { |
| .probe = mpc52xx_ata_probe, |
| .remove = mpc52xx_ata_remove, |
| #ifdef CONFIG_PM |
| .suspend = mpc52xx_ata_suspend, |
| .resume = mpc52xx_ata_resume, |
| #endif |
| .driver = { |
| .name = DRV_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = mpc52xx_ata_of_match, |
| }, |
| }; |
| |
| module_platform_driver(mpc52xx_ata_of_platform_driver); |
| |
| MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>"); |
| MODULE_DESCRIPTION("Freescale MPC52xx IDE/ATA libata driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(of, mpc52xx_ata_of_match); |
| |