| /* |
| * Sample driver for HardMAC IEEE 802.15.4 devices |
| * |
| * Copyright (C) 2009 Siemens AG |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Written by: |
| * Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com> |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/netdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_arp.h> |
| |
| #include <net/af_ieee802154.h> |
| #include <net/ieee802154_netdev.h> |
| #include <net/ieee802154.h> |
| #include <net/nl802154.h> |
| #include <net/wpan-phy.h> |
| |
| struct fakehard_priv { |
| struct wpan_phy *phy; |
| }; |
| |
| static struct wpan_phy *fake_to_phy(const struct net_device *dev) |
| { |
| struct fakehard_priv *priv = netdev_priv(dev); |
| return priv->phy; |
| } |
| |
| /** |
| * fake_get_phy - Return a phy corresponding to this device. |
| * @dev: The network device for which to return the wan-phy object |
| * |
| * This function returns a wpan-phy object corresponding to the passed |
| * network device. Reference counter for wpan-phy object is incremented, |
| * so when the wpan-phy isn't necessary, you should drop the reference |
| * via @wpan_phy_put() call. |
| */ |
| static struct wpan_phy *fake_get_phy(const struct net_device *dev) |
| { |
| struct wpan_phy *phy = fake_to_phy(dev); |
| return to_phy(get_device(&phy->dev)); |
| } |
| |
| /** |
| * fake_get_pan_id - Retrieve the PAN ID of the device. |
| * @dev: The network device to retrieve the PAN of. |
| * |
| * Return the ID of the PAN from the PIB. |
| */ |
| static u16 fake_get_pan_id(const struct net_device *dev) |
| { |
| BUG_ON(dev->type != ARPHRD_IEEE802154); |
| |
| return 0xeba1; |
| } |
| |
| /** |
| * fake_get_short_addr - Retrieve the short address of the device. |
| * @dev: The network device to retrieve the short address of. |
| * |
| * Returns the IEEE 802.15.4 short-form address cached for this |
| * device. If the device has not yet had a short address assigned |
| * then this should return 0xFFFF to indicate a lack of association. |
| */ |
| static u16 fake_get_short_addr(const struct net_device *dev) |
| { |
| BUG_ON(dev->type != ARPHRD_IEEE802154); |
| |
| return 0x1; |
| } |
| |
| /** |
| * fake_get_dsn - Retrieve the DSN of the device. |
| * @dev: The network device to retrieve the DSN for. |
| * |
| * Returns the IEEE 802.15.4 DSN for the network device. |
| * The DSN is the sequence number which will be added to each |
| * packet or MAC command frame by the MAC during transmission. |
| * |
| * DSN means 'Data Sequence Number'. |
| * |
| * Note: This is in section 7.2.1.2 of the IEEE 802.15.4-2006 |
| * document. |
| */ |
| static u8 fake_get_dsn(const struct net_device *dev) |
| { |
| BUG_ON(dev->type != ARPHRD_IEEE802154); |
| |
| return 0x00; /* DSN are implemented in HW, so return just 0 */ |
| } |
| |
| /** |
| * fake_get_bsn - Retrieve the BSN of the device. |
| * @dev: The network device to retrieve the BSN for. |
| * |
| * Returns the IEEE 802.15.4 BSN for the network device. |
| * The BSN is the sequence number which will be added to each |
| * beacon frame sent by the MAC. |
| * |
| * BSN means 'Beacon Sequence Number'. |
| * |
| * Note: This is in section 7.2.1.2 of the IEEE 802.15.4-2006 |
| * document. |
| */ |
| static u8 fake_get_bsn(const struct net_device *dev) |
| { |
| BUG_ON(dev->type != ARPHRD_IEEE802154); |
| |
| return 0x00; /* BSN are implemented in HW, so return just 0 */ |
| } |
| |
| /** |
| * fake_assoc_req - Make an association request to the HW. |
| * @dev: The network device which we are associating to a network. |
| * @addr: The coordinator with which we wish to associate. |
| * @channel: The channel on which to associate. |
| * @cap: The capability information field to use in the association. |
| * |
| * Start an association with a coordinator. The coordinator's address |
| * and PAN ID can be found in @addr. |
| * |
| * Note: This is in section 7.3.1 and 7.5.3.1 of the IEEE |
| * 802.15.4-2006 document. |
| */ |
| static int fake_assoc_req(struct net_device *dev, |
| struct ieee802154_addr *addr, u8 channel, u8 page, u8 cap) |
| { |
| struct wpan_phy *phy = fake_to_phy(dev); |
| |
| mutex_lock(&phy->pib_lock); |
| phy->current_channel = channel; |
| phy->current_page = page; |
| mutex_unlock(&phy->pib_lock); |
| |
| /* We simply emulate it here */ |
| return ieee802154_nl_assoc_confirm(dev, fake_get_short_addr(dev), |
| IEEE802154_SUCCESS); |
| } |
| |
| /** |
| * fake_assoc_resp - Send an association response to a device. |
| * @dev: The network device on which to send the response. |
| * @addr: The address of the device to respond to. |
| * @short_addr: The assigned short address for the device (if any). |
| * @status: The result of the association request. |
| * |
| * Queue the association response of the coordinator to another |
| * device's attempt to associate with the network which we |
| * coordinate. This is then added to the indirect-send queue to be |
| * transmitted to the end device when it polls for data. |
| * |
| * Note: This is in section 7.3.2 and 7.5.3.1 of the IEEE |
| * 802.15.4-2006 document. |
| */ |
| static int fake_assoc_resp(struct net_device *dev, |
| struct ieee802154_addr *addr, u16 short_addr, u8 status) |
| { |
| return 0; |
| } |
| |
| /** |
| * fake_disassoc_req - Disassociate a device from a network. |
| * @dev: The network device on which we're disassociating a device. |
| * @addr: The device to disassociate from the network. |
| * @reason: The reason to give to the device for being disassociated. |
| * |
| * This sends a disassociation notification to the device being |
| * disassociated from the network. |
| * |
| * Note: This is in section 7.5.3.2 of the IEEE 802.15.4-2006 |
| * document, with the reason described in 7.3.3.2. |
| */ |
| static int fake_disassoc_req(struct net_device *dev, |
| struct ieee802154_addr *addr, u8 reason) |
| { |
| return ieee802154_nl_disassoc_confirm(dev, IEEE802154_SUCCESS); |
| } |
| |
| /** |
| * fake_start_req - Start an IEEE 802.15.4 PAN. |
| * @dev: The network device on which to start the PAN. |
| * @addr: The coordinator address to use when starting the PAN. |
| * @channel: The channel on which to start the PAN. |
| * @bcn_ord: Beacon order. |
| * @sf_ord: Superframe order. |
| * @pan_coord: Whether or not we are the PAN coordinator or just |
| * requesting a realignment perhaps? |
| * @blx: Battery Life Extension feature bitfield. |
| * @coord_realign: Something to realign something else. |
| * |
| * If pan_coord is non-zero then this starts a network with the |
| * provided parameters, otherwise it attempts a coordinator |
| * realignment of the stated network instead. |
| * |
| * Note: This is in section 7.5.2.3 of the IEEE 802.15.4-2006 |
| * document, with 7.3.8 describing coordinator realignment. |
| */ |
| static int fake_start_req(struct net_device *dev, struct ieee802154_addr *addr, |
| u8 channel, u8 page, |
| u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx, |
| u8 coord_realign) |
| { |
| struct wpan_phy *phy = fake_to_phy(dev); |
| |
| mutex_lock(&phy->pib_lock); |
| phy->current_channel = channel; |
| phy->current_page = page; |
| mutex_unlock(&phy->pib_lock); |
| |
| /* We don't emulate beacons here at all, so START should fail */ |
| ieee802154_nl_start_confirm(dev, IEEE802154_INVALID_PARAMETER); |
| return 0; |
| } |
| |
| /** |
| * fake_scan_req - Start a channel scan. |
| * @dev: The network device on which to perform a channel scan. |
| * @type: The type of scan to perform. |
| * @channels: The channel bitmask to scan. |
| * @duration: How long to spend on each channel. |
| * |
| * This starts either a passive (energy) scan or an active (PAN) scan |
| * on the channels indicated in the @channels bitmask. The duration of |
| * the scan is measured in terms of superframe duration. Specifically, |
| * the scan will spend aBaseSuperFrameDuration * ((2^n) + 1) on each |
| * channel. |
| * |
| * Note: This is in section 7.5.2.1 of the IEEE 802.15.4-2006 document. |
| */ |
| static int fake_scan_req(struct net_device *dev, u8 type, u32 channels, |
| u8 page, u8 duration) |
| { |
| u8 edl[27] = {}; |
| return ieee802154_nl_scan_confirm(dev, IEEE802154_SUCCESS, type, |
| channels, page, |
| type == IEEE802154_MAC_SCAN_ED ? edl : NULL); |
| } |
| |
| static struct ieee802154_mlme_ops fake_mlme = { |
| .assoc_req = fake_assoc_req, |
| .assoc_resp = fake_assoc_resp, |
| .disassoc_req = fake_disassoc_req, |
| .start_req = fake_start_req, |
| .scan_req = fake_scan_req, |
| |
| .get_phy = fake_get_phy, |
| |
| .get_pan_id = fake_get_pan_id, |
| .get_short_addr = fake_get_short_addr, |
| .get_dsn = fake_get_dsn, |
| .get_bsn = fake_get_bsn, |
| }; |
| |
| static int ieee802154_fake_open(struct net_device *dev) |
| { |
| netif_start_queue(dev); |
| return 0; |
| } |
| |
| static int ieee802154_fake_close(struct net_device *dev) |
| { |
| netif_stop_queue(dev); |
| return 0; |
| } |
| |
| static netdev_tx_t ieee802154_fake_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes += skb->len; |
| |
| /* FIXME: do hardware work here ... */ |
| |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| |
| static int ieee802154_fake_ioctl(struct net_device *dev, struct ifreq *ifr, |
| int cmd) |
| { |
| struct sockaddr_ieee802154 *sa = |
| (struct sockaddr_ieee802154 *)&ifr->ifr_addr; |
| u16 pan_id, short_addr; |
| |
| switch (cmd) { |
| case SIOCGIFADDR: |
| /* FIXME: fixed here, get from device IRL */ |
| pan_id = fake_get_pan_id(dev); |
| short_addr = fake_get_short_addr(dev); |
| if (pan_id == IEEE802154_PANID_BROADCAST || |
| short_addr == IEEE802154_ADDR_BROADCAST) |
| return -EADDRNOTAVAIL; |
| |
| sa->family = AF_IEEE802154; |
| sa->addr.addr_type = IEEE802154_ADDR_SHORT; |
| sa->addr.pan_id = pan_id; |
| sa->addr.short_addr = short_addr; |
| return 0; |
| } |
| return -ENOIOCTLCMD; |
| } |
| |
| static int ieee802154_fake_mac_addr(struct net_device *dev, void *p) |
| { |
| return -EBUSY; /* HW address is built into the device */ |
| } |
| |
| static const struct net_device_ops fake_ops = { |
| .ndo_open = ieee802154_fake_open, |
| .ndo_stop = ieee802154_fake_close, |
| .ndo_start_xmit = ieee802154_fake_xmit, |
| .ndo_do_ioctl = ieee802154_fake_ioctl, |
| .ndo_set_mac_address = ieee802154_fake_mac_addr, |
| }; |
| |
| static void ieee802154_fake_destruct(struct net_device *dev) |
| { |
| struct wpan_phy *phy = fake_to_phy(dev); |
| |
| wpan_phy_unregister(phy); |
| free_netdev(dev); |
| wpan_phy_free(phy); |
| } |
| |
| static void ieee802154_fake_setup(struct net_device *dev) |
| { |
| dev->addr_len = IEEE802154_ADDR_LEN; |
| memset(dev->broadcast, 0xff, IEEE802154_ADDR_LEN); |
| dev->features = NETIF_F_HW_CSUM; |
| dev->needed_tailroom = 2; /* FCS */ |
| dev->mtu = 127; |
| dev->tx_queue_len = 10; |
| dev->type = ARPHRD_IEEE802154; |
| dev->flags = IFF_NOARP | IFF_BROADCAST; |
| dev->watchdog_timeo = 0; |
| dev->destructor = ieee802154_fake_destruct; |
| } |
| |
| |
| static int ieee802154fake_probe(struct platform_device *pdev) |
| { |
| struct net_device *dev; |
| struct fakehard_priv *priv; |
| struct wpan_phy *phy = wpan_phy_alloc(0); |
| int err; |
| |
| if (!phy) |
| return -ENOMEM; |
| |
| dev = alloc_netdev(sizeof(struct fakehard_priv), "hardwpan%d", ieee802154_fake_setup); |
| if (!dev) { |
| wpan_phy_free(phy); |
| return -ENOMEM; |
| } |
| |
| memcpy(dev->dev_addr, "\xba\xbe\xca\xfe\xde\xad\xbe\xef", |
| dev->addr_len); |
| memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); |
| |
| /* |
| * For now we'd like to emulate 2.4 GHz-only device, |
| * both O-QPSK and CSS |
| */ |
| /* 2.4 GHz O-QPSK 802.15.4-2003 */ |
| phy->channels_supported[0] |= 0x7FFF800; |
| /* 2.4 GHz CSS 802.15.4a-2007 */ |
| phy->channels_supported[3] |= 0x3fff; |
| |
| phy->transmit_power = 0xbf; |
| |
| dev->netdev_ops = &fake_ops; |
| dev->ml_priv = &fake_mlme; |
| |
| priv = netdev_priv(dev); |
| priv->phy = phy; |
| |
| wpan_phy_set_dev(phy, &pdev->dev); |
| SET_NETDEV_DEV(dev, &phy->dev); |
| |
| platform_set_drvdata(pdev, dev); |
| |
| err = wpan_phy_register(phy); |
| if (err) |
| goto out; |
| |
| err = register_netdev(dev); |
| if (err < 0) |
| goto out; |
| |
| dev_info(&pdev->dev, "Added ieee802154 HardMAC hardware\n"); |
| return 0; |
| |
| out: |
| unregister_netdev(dev); |
| return err; |
| } |
| |
| static int ieee802154fake_remove(struct platform_device *pdev) |
| { |
| struct net_device *dev = platform_get_drvdata(pdev); |
| unregister_netdev(dev); |
| return 0; |
| } |
| |
| static struct platform_device *ieee802154fake_dev; |
| |
| static struct platform_driver ieee802154fake_driver = { |
| .probe = ieee802154fake_probe, |
| .remove = ieee802154fake_remove, |
| .driver = { |
| .name = "ieee802154hardmac", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static __init int fake_init(void) |
| { |
| ieee802154fake_dev = platform_device_register_simple( |
| "ieee802154hardmac", -1, NULL, 0); |
| return platform_driver_register(&ieee802154fake_driver); |
| } |
| |
| static __exit void fake_exit(void) |
| { |
| platform_driver_unregister(&ieee802154fake_driver); |
| platform_device_unregister(ieee802154fake_dev); |
| } |
| |
| module_init(fake_init); |
| module_exit(fake_exit); |
| MODULE_LICENSE("GPL"); |