| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * PCI glue driver for SPI PXA2xx compatible controllers. |
| * CE4100's SPI device is more or less the same one as found on PXA. |
| * |
| * Copyright (C) 2016, 2021 Intel Corporation |
| */ |
| #include <linux/clk-provider.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/pm.h> |
| #include <linux/sprintf.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| |
| #include <linux/dmaengine.h> |
| #include <linux/platform_data/dma-dw.h> |
| |
| #include "spi-pxa2xx.h" |
| |
| #define PCI_DEVICE_ID_INTEL_QUARK_X1000 0x0935 |
| #define PCI_DEVICE_ID_INTEL_BYT 0x0f0e |
| #define PCI_DEVICE_ID_INTEL_MRFLD 0x1194 |
| #define PCI_DEVICE_ID_INTEL_BSW0 0x228e |
| #define PCI_DEVICE_ID_INTEL_BSW1 0x2290 |
| #define PCI_DEVICE_ID_INTEL_BSW2 0x22ac |
| #define PCI_DEVICE_ID_INTEL_CE4100 0x2e6a |
| #define PCI_DEVICE_ID_INTEL_LPT0_0 0x9c65 |
| #define PCI_DEVICE_ID_INTEL_LPT0_1 0x9c66 |
| #define PCI_DEVICE_ID_INTEL_LPT1_0 0x9ce5 |
| #define PCI_DEVICE_ID_INTEL_LPT1_1 0x9ce6 |
| |
| struct pxa_spi_info { |
| int (*setup)(struct pci_dev *pdev, struct pxa2xx_spi_controller *c); |
| }; |
| |
| static struct dw_dma_slave byt_tx_param = { .dst_id = 0 }; |
| static struct dw_dma_slave byt_rx_param = { .src_id = 1 }; |
| |
| static struct dw_dma_slave mrfld3_tx_param = { .dst_id = 15 }; |
| static struct dw_dma_slave mrfld3_rx_param = { .src_id = 14 }; |
| static struct dw_dma_slave mrfld5_tx_param = { .dst_id = 13 }; |
| static struct dw_dma_slave mrfld5_rx_param = { .src_id = 12 }; |
| static struct dw_dma_slave mrfld6_tx_param = { .dst_id = 11 }; |
| static struct dw_dma_slave mrfld6_rx_param = { .src_id = 10 }; |
| |
| static struct dw_dma_slave bsw0_tx_param = { .dst_id = 0 }; |
| static struct dw_dma_slave bsw0_rx_param = { .src_id = 1 }; |
| static struct dw_dma_slave bsw1_tx_param = { .dst_id = 6 }; |
| static struct dw_dma_slave bsw1_rx_param = { .src_id = 7 }; |
| static struct dw_dma_slave bsw2_tx_param = { .dst_id = 8 }; |
| static struct dw_dma_slave bsw2_rx_param = { .src_id = 9 }; |
| |
| static struct dw_dma_slave lpt1_tx_param = { .dst_id = 0 }; |
| static struct dw_dma_slave lpt1_rx_param = { .src_id = 1 }; |
| static struct dw_dma_slave lpt0_tx_param = { .dst_id = 2 }; |
| static struct dw_dma_slave lpt0_rx_param = { .src_id = 3 }; |
| |
| static void pxa2xx_spi_pci_clk_unregister(void *clk) |
| { |
| clk_unregister(clk); |
| } |
| |
| static int pxa2xx_spi_pci_clk_register(struct pci_dev *dev, struct ssp_device *ssp, |
| unsigned long rate) |
| { |
| char buf[40]; |
| |
| snprintf(buf, sizeof(buf), "pxa2xx-spi.%d", ssp->port_id); |
| ssp->clk = clk_register_fixed_rate(&dev->dev, buf, NULL, 0, rate); |
| if (IS_ERR(ssp->clk)) |
| return PTR_ERR(ssp->clk); |
| |
| return devm_add_action_or_reset(&dev->dev, pxa2xx_spi_pci_clk_unregister, ssp->clk); |
| } |
| |
| static bool lpss_dma_filter(struct dma_chan *chan, void *param) |
| { |
| struct dw_dma_slave *dws = param; |
| |
| if (dws->dma_dev != chan->device->dev) |
| return false; |
| |
| chan->private = dws; |
| return true; |
| } |
| |
| static void lpss_dma_put_device(void *dma_dev) |
| { |
| pci_dev_put(dma_dev); |
| } |
| |
| static int lpss_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c) |
| { |
| struct ssp_device *ssp = &c->ssp; |
| struct dw_dma_slave *tx, *rx; |
| struct pci_dev *dma_dev; |
| int ret; |
| |
| switch (dev->device) { |
| case PCI_DEVICE_ID_INTEL_BYT: |
| ssp->type = LPSS_BYT_SSP; |
| ssp->port_id = 0; |
| c->tx_param = &byt_tx_param; |
| c->rx_param = &byt_rx_param; |
| break; |
| case PCI_DEVICE_ID_INTEL_BSW0: |
| ssp->type = LPSS_BSW_SSP; |
| ssp->port_id = 0; |
| c->tx_param = &bsw0_tx_param; |
| c->rx_param = &bsw0_rx_param; |
| break; |
| case PCI_DEVICE_ID_INTEL_BSW1: |
| ssp->type = LPSS_BSW_SSP; |
| ssp->port_id = 1; |
| c->tx_param = &bsw1_tx_param; |
| c->rx_param = &bsw1_rx_param; |
| break; |
| case PCI_DEVICE_ID_INTEL_BSW2: |
| ssp->type = LPSS_BSW_SSP; |
| ssp->port_id = 2; |
| c->tx_param = &bsw2_tx_param; |
| c->rx_param = &bsw2_rx_param; |
| break; |
| case PCI_DEVICE_ID_INTEL_LPT0_0: |
| case PCI_DEVICE_ID_INTEL_LPT1_0: |
| ssp->type = LPSS_LPT_SSP; |
| ssp->port_id = 0; |
| c->tx_param = &lpt0_tx_param; |
| c->rx_param = &lpt0_rx_param; |
| break; |
| case PCI_DEVICE_ID_INTEL_LPT0_1: |
| case PCI_DEVICE_ID_INTEL_LPT1_1: |
| ssp->type = LPSS_LPT_SSP; |
| ssp->port_id = 1; |
| c->tx_param = &lpt1_tx_param; |
| c->rx_param = &lpt1_rx_param; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| c->num_chipselect = 1; |
| |
| ret = pxa2xx_spi_pci_clk_register(dev, ssp, 50000000); |
| if (ret) |
| return ret; |
| |
| dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); |
| ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev); |
| if (ret) |
| return ret; |
| |
| tx = c->tx_param; |
| tx->dma_dev = &dma_dev->dev; |
| tx->m_master = 0; |
| tx->p_master = 1; |
| |
| rx = c->rx_param; |
| rx->dma_dev = &dma_dev->dev; |
| rx->m_master = 0; |
| rx->p_master = 1; |
| |
| c->dma_filter = lpss_dma_filter; |
| c->dma_burst_size = 1; |
| c->enable_dma = 1; |
| return 0; |
| } |
| |
| static const struct pxa_spi_info lpss_info_config = { |
| .setup = lpss_spi_setup, |
| }; |
| |
| static int ce4100_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c) |
| { |
| struct ssp_device *ssp = &c->ssp; |
| |
| ssp->type = PXA25x_SSP; |
| ssp->port_id = dev->devfn; |
| c->num_chipselect = dev->devfn; |
| |
| return pxa2xx_spi_pci_clk_register(dev, ssp, 3686400); |
| } |
| |
| static const struct pxa_spi_info ce4100_info_config = { |
| .setup = ce4100_spi_setup, |
| }; |
| |
| static int mrfld_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c) |
| { |
| struct ssp_device *ssp = &c->ssp; |
| struct dw_dma_slave *tx, *rx; |
| struct pci_dev *dma_dev; |
| int ret; |
| |
| ssp->type = MRFLD_SSP; |
| |
| switch (PCI_FUNC(dev->devfn)) { |
| case 0: |
| ssp->port_id = 3; |
| c->num_chipselect = 1; |
| c->tx_param = &mrfld3_tx_param; |
| c->rx_param = &mrfld3_rx_param; |
| break; |
| case 1: |
| ssp->port_id = 5; |
| c->num_chipselect = 4; |
| c->tx_param = &mrfld5_tx_param; |
| c->rx_param = &mrfld5_rx_param; |
| break; |
| case 2: |
| ssp->port_id = 6; |
| c->num_chipselect = 1; |
| c->tx_param = &mrfld6_tx_param; |
| c->rx_param = &mrfld6_rx_param; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| ret = pxa2xx_spi_pci_clk_register(dev, ssp, 25000000); |
| if (ret) |
| return ret; |
| |
| dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0)); |
| ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev); |
| if (ret) |
| return ret; |
| |
| tx = c->tx_param; |
| tx->dma_dev = &dma_dev->dev; |
| |
| rx = c->rx_param; |
| rx->dma_dev = &dma_dev->dev; |
| |
| c->dma_filter = lpss_dma_filter; |
| c->dma_burst_size = 8; |
| c->enable_dma = 1; |
| return 0; |
| } |
| |
| static const struct pxa_spi_info mrfld_info_config = { |
| .setup = mrfld_spi_setup, |
| }; |
| |
| static int qrk_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c) |
| { |
| struct ssp_device *ssp = &c->ssp; |
| |
| ssp->type = QUARK_X1000_SSP; |
| ssp->port_id = dev->devfn; |
| c->num_chipselect = 1; |
| |
| return pxa2xx_spi_pci_clk_register(dev, ssp, 50000000); |
| } |
| |
| static const struct pxa_spi_info qrk_info_config = { |
| .setup = qrk_spi_setup, |
| }; |
| |
| static int pxa2xx_spi_pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *ent) |
| { |
| const struct pxa_spi_info *info; |
| int ret; |
| struct pxa2xx_spi_controller *pdata; |
| struct ssp_device *ssp; |
| |
| ret = pcim_enable_device(dev); |
| if (ret) |
| return ret; |
| |
| ret = pcim_iomap_regions(dev, 1 << 0, "PXA2xx SPI"); |
| if (ret) |
| return ret; |
| |
| pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| ssp = &pdata->ssp; |
| ssp->dev = &dev->dev; |
| ssp->phys_base = pci_resource_start(dev, 0); |
| ssp->mmio_base = pcim_iomap_table(dev)[0]; |
| |
| info = (struct pxa_spi_info *)ent->driver_data; |
| ret = info->setup(dev, pdata); |
| if (ret) |
| return ret; |
| |
| pci_set_master(dev); |
| |
| ret = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES); |
| if (ret < 0) |
| return ret; |
| ssp->irq = pci_irq_vector(dev, 0); |
| |
| return pxa2xx_spi_probe(&dev->dev, ssp); |
| } |
| |
| static void pxa2xx_spi_pci_remove(struct pci_dev *dev) |
| { |
| pxa2xx_spi_remove(&dev->dev); |
| } |
| |
| static const struct pci_device_id pxa2xx_spi_pci_devices[] = { |
| { PCI_DEVICE_DATA(INTEL, QUARK_X1000, &qrk_info_config) }, |
| { PCI_DEVICE_DATA(INTEL, BYT, &lpss_info_config) }, |
| { PCI_DEVICE_DATA(INTEL, MRFLD, &mrfld_info_config) }, |
| { PCI_DEVICE_DATA(INTEL, BSW0, &lpss_info_config) }, |
| { PCI_DEVICE_DATA(INTEL, BSW1, &lpss_info_config) }, |
| { PCI_DEVICE_DATA(INTEL, BSW2, &lpss_info_config) }, |
| { PCI_DEVICE_DATA(INTEL, CE4100, &ce4100_info_config) }, |
| { PCI_DEVICE_DATA(INTEL, LPT0_0, &lpss_info_config) }, |
| { PCI_DEVICE_DATA(INTEL, LPT0_1, &lpss_info_config) }, |
| { PCI_DEVICE_DATA(INTEL, LPT1_0, &lpss_info_config) }, |
| { PCI_DEVICE_DATA(INTEL, LPT1_1, &lpss_info_config) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(pci, pxa2xx_spi_pci_devices); |
| |
| static struct pci_driver pxa2xx_spi_pci_driver = { |
| .name = "pxa2xx_spi_pci", |
| .id_table = pxa2xx_spi_pci_devices, |
| .driver = { |
| .pm = pm_ptr(&pxa2xx_spi_pm_ops), |
| }, |
| .probe = pxa2xx_spi_pci_probe, |
| .remove = pxa2xx_spi_pci_remove, |
| }; |
| |
| module_pci_driver(pxa2xx_spi_pci_driver); |
| |
| MODULE_DESCRIPTION("CE4100/LPSS PCI-SPI glue code for PXA's driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_IMPORT_NS(SPI_PXA2xx); |
| MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); |