| # SPDX-License-Identifier: GPL-2.0 |
| |
| comment "Parallel IDE protocol modules" |
| depends on PATA_PARPORT |
| |
| config PATA_PARPORT_ATEN |
| tristate "ATEN EH-100 protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the ATEN EH-100 parallel port IDE |
| protocol. This protocol is used in some inexpensive low performance |
| parallel port kits made in Hong Kong. |
| |
| config PATA_PARPORT_BPCK |
| tristate "MicroSolutions backpack (Series 5) protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the Micro Solutions BACKPACK |
| parallel port Series 5 IDE protocol. (Most BACKPACK drives made |
| before 1999 were Series 5) Series 5 drives will NOT always have the |
| Series noted on the bottom of the drive. Series 6 drivers will. |
| |
| In other words, if your BACKPACK drive doesn't say "Series 6" on the |
| bottom, enable this option. |
| |
| config PATA_PARPORT_BPCK6 |
| tristate "MicroSolutions backpack (Series 6) protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the Micro Solutions BACKPACK |
| parallel port Series 6 IDE protocol. (Most BACKPACK drives made |
| after 1999 were Series 6) Series 6 drives will have the Series noted |
| on the bottom of the drive. Series 5 drivers don't always have it |
| noted. |
| |
| In other words, if your BACKPACK drive says "Series 6" on the |
| bottom, enable this option. |
| |
| config PATA_PARPORT_COMM |
| tristate "DataStor Commuter protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the Commuter parallel port IDE |
| protocol from DataStor. |
| |
| config PATA_PARPORT_DSTR |
| tristate "DataStor EP-2000 protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the EP-2000 parallel port IDE |
| protocol from DataStor |
| |
| config PATA_PARPORT_FIT2 |
| tristate "FIT TD-2000 protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the TD-2000 parallel port IDE |
| protocol from Fidelity International Technology. This is a simple |
| (low speed) adapter that is used in some portable hard drives. |
| |
| config PATA_PARPORT_FIT3 |
| tristate "FIT TD-3000 protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the TD-3000 parallel port IDE |
| protocol from Fidelity International Technology. This protocol is |
| used in newer models of their portable disk, CD-ROM and PD/CD |
| devices. |
| |
| config PATA_PARPORT_EPAT |
| tristate "Shuttle EPAT/EPEZ protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the EPAT parallel port IDE protocol. |
| EPAT is a parallel port IDE adapter manufactured by Shuttle |
| Technology and widely used in devices from major vendors such as |
| Hewlett-Packard, SyQuest, Imation and Avatar. |
| |
| config PATA_PARPORT_EPATC8 |
| bool "Support c7/c8 chips" |
| depends on PATA_PARPORT_EPAT |
| help |
| This option enables support for the newer Shuttle EP1284 (aka c7 and |
| c8) chip. You need this if you are using any recent Imation SuperDisk |
| (LS-120) drive. |
| |
| config PATA_PARPORT_EPIA |
| tristate "Shuttle EPIA protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the (obsolete) EPIA parallel port |
| IDE protocol from Shuttle Technology. This adapter can still be |
| found in some no-name kits. |
| |
| config PATA_PARPORT_FRIQ |
| tristate "Freecom IQ ASIC-2 protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for version 2 of the Freecom IQ parallel |
| port IDE adapter. This adapter is used by the Maxell Superdisk |
| drive. |
| |
| config PATA_PARPORT_FRPW |
| tristate "FreeCom power protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the Freecom power parallel port IDE |
| protocol. |
| |
| config PATA_PARPORT_KBIC |
| tristate "KingByte KBIC-951A/971A protocols" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the KBIC-951A and KBIC-971A parallel |
| port IDE protocols from KingByte Information Corp. KingByte's |
| adapters appear in many no-name portable disk and CD-ROM products, |
| especially in Europe. |
| |
| config PATA_PARPORT_KTTI |
| tristate "KT PHd protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the "PHd" parallel port IDE protocol |
| from KT Technology. This is a simple (low speed) adapter that is |
| used in some 2.5" portable hard drives. |
| |
| config PATA_PARPORT_ON20 |
| tristate "OnSpec 90c20 protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the (obsolete) 90c20 parallel port |
| IDE protocol from OnSpec (often marketed under the ValuStore brand |
| name). |
| |
| config PATA_PARPORT_ON26 |
| tristate "OnSpec 90c26 protocol" |
| depends on PATA_PARPORT |
| help |
| This option enables support for the 90c26 parallel port IDE protocol |
| from OnSpec Electronics (often marketed under the ValuStore brand |
| name). |
