blob: de79cf91ad5fc79c8017016f6f52420637dec2f0 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* (c) 1998 Grant R. Guenther <grant@torque.net>
*
* fit2.c is a low-level protocol driver for the older version
* of the Fidelity International Technology parallel port adapter.
* This adapter is used in their TransDisk 2000 and older TransDisk
* 3000 portable hard-drives. As far as I can tell, this device
* supports 4-bit mode _only_.
*
* Newer models of the FIT products use an enhanced protocol.
* The "fit3" protocol module should support current drives.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
#include "pata_parport.h"
#define j44(a, b) (((a >> 4) & 0x0f) | (b & 0xf0))
/*
* cont = 0 - access the IDE register file
* cont = 1 - access the IDE command set
*
* NB: The FIT adapter does not appear to use the control registers.
* So, we map ALT_STATUS to STATUS and NO-OP writes to the device
* control register - this means that IDE reset will not work on these
* devices.
*/
static void fit2_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{
if (cont == 1)
return;
w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4);
}
static int fit2_read_regr(struct pi_adapter *pi, int cont, int regr)
{
int a, b, r;
if (cont) {
if (regr != 6)
return 0xff;
r = 7;
} else {
r = regr + 0x10;
}
w2(0xc); w0(r); w2(4); w2(5);
w0(0); a = r1();
w0(1); b = r1();
w2(4);
return j44(a, b);
}
static void fit2_read_block(struct pi_adapter *pi, char *buf, int count)
{
int k, a, b, c, d;
w2(0xc); w0(0x10);
for (k = 0; k < count / 4; k++) {
w2(4); w2(5);
w0(0); a = r1(); w0(1); b = r1();
w0(3); c = r1(); w0(2); d = r1();
buf[4 * k + 0] = j44(a, b);
buf[4 * k + 1] = j44(d, c);
w2(4); w2(5);
a = r1(); w0(3); b = r1();
w0(1); c = r1(); w0(0); d = r1();
buf[4 * k + 2] = j44(d, c);
buf[4 * k + 3] = j44(a, b);
}
w2(4);
}
static void fit2_write_block(struct pi_adapter *pi, char *buf, int count)
{
int k;
w2(0xc); w0(0);
for (k = 0; k < count / 2; k++) {
w2(4); w0(buf[2 * k]);
w2(5); w0(buf[2 * k + 1]);
}
w2(4);
}
static void fit2_connect(struct pi_adapter *pi)
{
pi->saved_r0 = r0();
pi->saved_r2 = r2();
w2(0xcc);
}
static void fit2_disconnect(struct pi_adapter *pi)
{
w0(pi->saved_r0);
w2(pi->saved_r2);
}
static void fit2_log_adapter(struct pi_adapter *pi)
{
dev_info(&pi->dev, "FIT 2000 adapter at 0x%x, delay %d\n",
pi->port, pi->delay);
}
static struct pi_protocol fit2 = {
.owner = THIS_MODULE,
.name = "fit2",
.max_mode = 1,
.epp_first = 2,
.default_delay = 1,
.max_units = 1,
.write_regr = fit2_write_regr,
.read_regr = fit2_read_regr,
.write_block = fit2_write_block,
.read_block = fit2_read_block,
.connect = fit2_connect,
.disconnect = fit2_disconnect,
.log_adapter = fit2_log_adapter,
};
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Grant R. Guenther <grant@torque.net>");
MODULE_DESCRIPTION("Fidelity International Technology parallel port IDE adapter"
"(older models) protocol driver");
module_pata_parport_driver(fit2);