blob: 8be4d576da7733d28b8e4a1a07e86a0d11584ae6 [file] [log] [blame]
/*
* HID over I2C Open Firmware Subclass
*
* Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
* Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
* Copyright (c) 2012 Red Hat, Inc
*
* This code was forked out of the core code, which was partly based on
* "USB HID support for Linux":
*
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2007-2008 Oliver Neukum
* Copyright (c) 2006-2010 Jiri Kosina
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gpio/consumer.h>
#include <linux/hid.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pm.h>
#include <linux/regulator/consumer.h>
#include "i2c-hid.h"
struct i2c_hid_of {
struct i2chid_ops ops;
struct i2c_client *client;
struct gpio_desc *reset_gpio;
struct regulator_bulk_data supplies[2];
int post_power_delay_ms;
int post_reset_delay_ms;
};
static int i2c_hid_of_power_up(struct i2chid_ops *ops)
{
struct i2c_hid_of *ihid_of = container_of(ops, struct i2c_hid_of, ops);
struct device *dev = &ihid_of->client->dev;
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(ihid_of->supplies),
ihid_of->supplies);
if (ret) {
dev_warn(dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
if (ihid_of->post_power_delay_ms)
msleep(ihid_of->post_power_delay_ms);
gpiod_set_value_cansleep(ihid_of->reset_gpio, 0);
if (ihid_of->post_reset_delay_ms)
msleep(ihid_of->post_reset_delay_ms);
return 0;
}
static void i2c_hid_of_power_down(struct i2chid_ops *ops)
{
struct i2c_hid_of *ihid_of = container_of(ops, struct i2c_hid_of, ops);
gpiod_set_value_cansleep(ihid_of->reset_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(ihid_of->supplies),
ihid_of->supplies);
}
static int i2c_hid_of_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct i2c_hid_of *ihid_of;
u16 hid_descriptor_address;
u32 quirks = 0;
int ret;
u32 val;
ihid_of = devm_kzalloc(dev, sizeof(*ihid_of), GFP_KERNEL);
if (!ihid_of)
return -ENOMEM;
ihid_of->client = client;
ihid_of->ops.power_up = i2c_hid_of_power_up;
ihid_of->ops.power_down = i2c_hid_of_power_down;
ret = device_property_read_u32(dev, "hid-descr-addr", &val);
if (ret) {
dev_err(dev, "HID register address not provided\n");
return -ENODEV;
}
if (val >> 16) {
dev_err(dev, "Bad HID register address: 0x%08x\n", val);
return -EINVAL;
}
hid_descriptor_address = val;
if (!device_property_read_u32(dev, "post-power-on-delay-ms", &val))
ihid_of->post_power_delay_ms = val;
/*
* Note this is a kernel internal device-property set by x86 platform code,
* this MUST not be used in devicetree files without first adding it to
* the DT bindings.
*/
if (!device_property_read_u32(dev, "post-reset-deassert-delay-ms", &val))
ihid_of->post_reset_delay_ms = val;
/* Start out with reset asserted */
ihid_of->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ihid_of->reset_gpio))
return PTR_ERR(ihid_of->reset_gpio);
ihid_of->supplies[0].supply = "vdd";
ihid_of->supplies[1].supply = "vddl";
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ihid_of->supplies),
ihid_of->supplies);
if (ret)
return ret;
if (device_property_read_bool(dev, "touchscreen-inverted-x"))
quirks |= HID_QUIRK_X_INVERT;
if (device_property_read_bool(dev, "touchscreen-inverted-y"))
quirks |= HID_QUIRK_Y_INVERT;
return i2c_hid_core_probe(client, &ihid_of->ops,
hid_descriptor_address, quirks);
}
#ifdef CONFIG_OF
static const struct of_device_id i2c_hid_of_match[] = {
{ .compatible = "hid-over-i2c" },
{},
};
MODULE_DEVICE_TABLE(of, i2c_hid_of_match);
#endif
static const struct i2c_device_id i2c_hid_of_id_table[] = {
{ "hid", 0 },
{ "hid-over-i2c", 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, i2c_hid_of_id_table);
static struct i2c_driver i2c_hid_of_driver = {
.driver = {
.name = "i2c_hid_of",
.pm = &i2c_hid_core_pm,
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(i2c_hid_of_match),
},
.probe = i2c_hid_of_probe,
.remove = i2c_hid_core_remove,
.shutdown = i2c_hid_core_shutdown,
.id_table = i2c_hid_of_id_table,
};
module_i2c_driver(i2c_hid_of_driver);
MODULE_DESCRIPTION("HID over I2C OF driver");
MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
MODULE_LICENSE("GPL");