| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2022 MediaTek Inc. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/devfreq.h> |
| #include <linux/minmax.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_opp.h> |
| #include <linux/regulator/consumer.h> |
| |
| struct mtk_ccifreq_platform_data { |
| int min_volt_shift; |
| int max_volt_shift; |
| int proc_max_volt; |
| int sram_min_volt; |
| int sram_max_volt; |
| }; |
| |
| struct mtk_ccifreq_drv { |
| struct device *dev; |
| struct devfreq *devfreq; |
| struct regulator *proc_reg; |
| struct regulator *sram_reg; |
| struct clk *cci_clk; |
| struct clk *inter_clk; |
| int inter_voltage; |
| unsigned long pre_freq; |
| /* Avoid race condition for regulators between notify and policy */ |
| struct mutex reg_lock; |
| struct notifier_block opp_nb; |
| const struct mtk_ccifreq_platform_data *soc_data; |
| int vtrack_max; |
| }; |
| |
| static int mtk_ccifreq_set_voltage(struct mtk_ccifreq_drv *drv, int new_voltage) |
| { |
| const struct mtk_ccifreq_platform_data *soc_data = drv->soc_data; |
| struct device *dev = drv->dev; |
| int pre_voltage, pre_vsram, new_vsram, vsram, voltage, ret; |
| int retry_max = drv->vtrack_max; |
| |
| if (!drv->sram_reg) { |
| ret = regulator_set_voltage(drv->proc_reg, new_voltage, |
| drv->soc_data->proc_max_volt); |
| return ret; |
| } |
| |
| pre_voltage = regulator_get_voltage(drv->proc_reg); |
| if (pre_voltage < 0) { |
| dev_err(dev, "invalid vproc value: %d\n", pre_voltage); |
| return pre_voltage; |
| } |
| |
| pre_vsram = regulator_get_voltage(drv->sram_reg); |
| if (pre_vsram < 0) { |
| dev_err(dev, "invalid vsram value: %d\n", pre_vsram); |
| return pre_vsram; |
| } |
| |
| new_vsram = clamp(new_voltage + soc_data->min_volt_shift, |
| soc_data->sram_min_volt, soc_data->sram_max_volt); |
| |
| do { |
| if (pre_voltage <= new_voltage) { |
| vsram = clamp(pre_voltage + soc_data->max_volt_shift, |
| soc_data->sram_min_volt, new_vsram); |
| ret = regulator_set_voltage(drv->sram_reg, vsram, |
| soc_data->sram_max_volt); |
| if (ret) |
| return ret; |
| |
| if (vsram == soc_data->sram_max_volt || |
| new_vsram == soc_data->sram_min_volt) |
| voltage = new_voltage; |
| else |
| voltage = vsram - soc_data->min_volt_shift; |
| |
| ret = regulator_set_voltage(drv->proc_reg, voltage, |
| soc_data->proc_max_volt); |
| if (ret) { |
| regulator_set_voltage(drv->sram_reg, pre_vsram, |
| soc_data->sram_max_volt); |
| return ret; |
| } |
| } else if (pre_voltage > new_voltage) { |
| voltage = max(new_voltage, |
| pre_vsram - soc_data->max_volt_shift); |
| ret = regulator_set_voltage(drv->proc_reg, voltage, |
| soc_data->proc_max_volt); |
| if (ret) |
| return ret; |
| |
| if (voltage == new_voltage) |
| vsram = new_vsram; |
| else |
| vsram = max(new_vsram, |
| voltage + soc_data->min_volt_shift); |
| |
| ret = regulator_set_voltage(drv->sram_reg, vsram, |
| soc_data->sram_max_volt); |
| if (ret) { |
| regulator_set_voltage(drv->proc_reg, pre_voltage, |
| soc_data->proc_max_volt); |
| return ret; |
| } |
| } |
| |
| pre_voltage = voltage; |
| pre_vsram = vsram; |
| |
| if (--retry_max < 0) { |
| dev_err(dev, |
| "over loop count, failed to set voltage\n"); |
| return -EINVAL; |
| } |
| } while (voltage != new_voltage || vsram != new_vsram); |
| |
| return 0; |
| } |
| |
| static int mtk_ccifreq_target(struct device *dev, unsigned long *freq, |
| u32 flags) |
| { |
| struct mtk_ccifreq_drv *drv = dev_get_drvdata(dev); |
| struct clk *cci_pll; |
| struct dev_pm_opp *opp; |
| unsigned long opp_rate; |
| int voltage, pre_voltage, inter_voltage, target_voltage, ret; |
| |
| if (!drv) |
| return -EINVAL; |
| |
| if (drv->pre_freq == *freq) |
| return 0; |
| |
| mutex_lock(&drv->reg_lock); |
| |
| inter_voltage = drv->inter_voltage; |
| cci_pll = clk_get_parent(drv->cci_clk); |
| |
| opp_rate = *freq; |
| opp = devfreq_recommended_opp(dev, &opp_rate, 1); |
| if (IS_ERR(opp)) { |
| dev_err(dev, "failed to find opp for freq: %ld\n", opp_rate); |
| ret = PTR_ERR(opp); |
| goto out_unlock; |
| } |
| |
| voltage = dev_pm_opp_get_voltage(opp); |
| dev_pm_opp_put(opp); |
| |
| pre_voltage = regulator_get_voltage(drv->proc_reg); |
| if (pre_voltage < 0) { |
| dev_err(dev, "invalid vproc value: %d\n", pre_voltage); |
| ret = pre_voltage; |
| goto out_unlock; |
| } |
| |
| /* scale up: set voltage first then freq. */ |
| target_voltage = max(inter_voltage, voltage); |
| if (pre_voltage <= target_voltage) { |
| ret = mtk_ccifreq_set_voltage(drv, target_voltage); |
| if (ret) { |
| dev_err(dev, "failed to scale up voltage\n"); |
| goto out_restore_voltage; |
| } |
| } |
| |
| /* switch the cci clock to intermediate clock source. */ |
| ret = clk_set_parent(drv->cci_clk, drv->inter_clk); |
| if (ret) { |
| dev_err(dev, "failed to re-parent cci clock\n"); |
| goto out_restore_voltage; |
| } |
| |
| /* set the original clock to target rate. */ |
| ret = clk_set_rate(cci_pll, *freq); |
| if (ret) { |
| dev_err(dev, "failed to set cci pll rate: %d\n", ret); |
| clk_set_parent(drv->cci_clk, cci_pll); |
| goto out_restore_voltage; |
| } |
| |
| /* switch the cci clock back to the original clock source. */ |
| ret = clk_set_parent(drv->cci_clk, cci_pll); |
| if (ret) { |
| dev_err(dev, "failed to re-parent cci clock\n"); |
| mtk_ccifreq_set_voltage(drv, inter_voltage); |
| goto out_unlock; |
| } |
| |
| /* |
| * If the new voltage is lower than the intermediate voltage or the |
| * original voltage, scale down to the new voltage. |
| */ |
| if (voltage < inter_voltage || voltage < pre_voltage) { |
| ret = mtk_ccifreq_set_voltage(drv, voltage); |
| if (ret) { |
| dev_err(dev, "failed to scale down voltage\n"); |
| goto out_unlock; |
| } |
| } |
| |
| drv->pre_freq = *freq; |
| mutex_unlock(&drv->reg_lock); |
| |
| return 0; |
| |
| out_restore_voltage: |
| mtk_ccifreq_set_voltage(drv, pre_voltage); |
| |
| out_unlock: |
| mutex_unlock(&drv->reg_lock); |
| return ret; |
| } |
| |
| static int mtk_ccifreq_opp_notifier(struct notifier_block *nb, |
| unsigned long event, void *data) |
| { |
| struct dev_pm_opp *opp = data; |
| struct mtk_ccifreq_drv *drv; |
| unsigned long freq, volt; |
| |
| drv = container_of(nb, struct mtk_ccifreq_drv, opp_nb); |
| |
| if (event == OPP_EVENT_ADJUST_VOLTAGE) { |
| mutex_lock(&drv->reg_lock); |
| freq = dev_pm_opp_get_freq(opp); |
| |
| /* current opp item is changed */ |
| if (freq == drv->pre_freq) { |
| volt = dev_pm_opp_get_voltage(opp); |
| mtk_ccifreq_set_voltage(drv, volt); |
| } |
| mutex_unlock(&drv->reg_lock); |
| } |
| |
| return 0; |
| } |
| |
| static struct devfreq_dev_profile mtk_ccifreq_profile = { |
| .target = mtk_ccifreq_target, |
| }; |
| |
| static int mtk_ccifreq_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct mtk_ccifreq_drv *drv; |
| struct devfreq_passive_data *passive_data; |
| struct dev_pm_opp *opp; |
| unsigned long rate, opp_volt; |
| int ret; |
| |
| drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); |
| if (!drv) |
| return -ENOMEM; |
| |
| drv->dev = dev; |
| drv->soc_data = (const struct mtk_ccifreq_platform_data *) |
| of_device_get_match_data(&pdev->dev); |
| mutex_init(&drv->reg_lock); |
| platform_set_drvdata(pdev, drv); |
| |
| drv->cci_clk = devm_clk_get(dev, "cci"); |
| if (IS_ERR(drv->cci_clk)) { |
| ret = PTR_ERR(drv->cci_clk); |
| return dev_err_probe(dev, ret, "failed to get cci clk\n"); |
| } |
| |
| drv->inter_clk = devm_clk_get(dev, "intermediate"); |
| if (IS_ERR(drv->inter_clk)) { |
| ret = PTR_ERR(drv->inter_clk); |
| return dev_err_probe(dev, ret, |
| "failed to get intermediate clk\n"); |
| } |
| |
| drv->proc_reg = devm_regulator_get_optional(dev, "proc"); |
| if (IS_ERR(drv->proc_reg)) { |
| ret = PTR_ERR(drv->proc_reg); |
| return dev_err_probe(dev, ret, |
| "failed to get proc regulator\n"); |
| } |
| |
| ret = regulator_enable(drv->proc_reg); |
| if (ret) { |
| dev_err(dev, "failed to enable proc regulator\n"); |
| return ret; |
| } |
| |
| drv->sram_reg = devm_regulator_get_optional(dev, "sram"); |
| if (IS_ERR(drv->sram_reg)) { |
| ret = PTR_ERR(drv->sram_reg); |
| if (ret == -EPROBE_DEFER) |
| goto out_free_resources; |
| |
| drv->sram_reg = NULL; |
| } else { |
| ret = regulator_enable(drv->sram_reg); |
| if (ret) { |
| dev_err(dev, "failed to enable sram regulator\n"); |
| goto out_free_resources; |
| } |
| } |
| |
| /* |
| * We assume min voltage is 0 and tracking target voltage using |
| * min_volt_shift for each iteration. |
| * The retry_max is 3 times of expected iteration count. |
| */ |
| drv->vtrack_max = 3 * DIV_ROUND_UP(max(drv->soc_data->sram_max_volt, |
| drv->soc_data->proc_max_volt), |
| drv->soc_data->min_volt_shift); |
| |
| ret = clk_prepare_enable(drv->cci_clk); |
| if (ret) |
| goto out_free_resources; |
| |
| ret = dev_pm_opp_of_add_table(dev); |
| if (ret) { |
| dev_err(dev, "failed to add opp table: %d\n", ret); |
| goto out_disable_cci_clk; |
| } |
| |
| rate = clk_get_rate(drv->inter_clk); |
| opp = dev_pm_opp_find_freq_ceil(dev, &rate); |
| if (IS_ERR(opp)) { |
| ret = PTR_ERR(opp); |
| dev_err(dev, "failed to get intermediate opp: %d\n", ret); |
| goto out_remove_opp_table; |
| } |
| drv->inter_voltage = dev_pm_opp_get_voltage(opp); |
| dev_pm_opp_put(opp); |
| |
| rate = U32_MAX; |
| opp = dev_pm_opp_find_freq_floor(drv->dev, &rate); |
| if (IS_ERR(opp)) { |
| dev_err(dev, "failed to get opp\n"); |
| ret = PTR_ERR(opp); |
| goto out_remove_opp_table; |
| } |
| |
| opp_volt = dev_pm_opp_get_voltage(opp); |
| dev_pm_opp_put(opp); |
| ret = mtk_ccifreq_set_voltage(drv, opp_volt); |
| if (ret) { |
| dev_err(dev, "failed to scale to highest voltage %lu in proc_reg\n", |
| opp_volt); |
| goto out_remove_opp_table; |
| } |
| |
| passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL); |
| if (!passive_data) { |
| ret = -ENOMEM; |
| goto out_remove_opp_table; |
| } |
| |
| passive_data->parent_type = CPUFREQ_PARENT_DEV; |
| drv->devfreq = devm_devfreq_add_device(dev, &mtk_ccifreq_profile, |
| DEVFREQ_GOV_PASSIVE, |
| passive_data); |
| if (IS_ERR(drv->devfreq)) { |
| ret = -EPROBE_DEFER; |
| dev_err(dev, "failed to add devfreq device: %ld\n", |
| PTR_ERR(drv->devfreq)); |
| goto out_remove_opp_table; |
| } |
| |
| drv->opp_nb.notifier_call = mtk_ccifreq_opp_notifier; |
| ret = dev_pm_opp_register_notifier(dev, &drv->opp_nb); |
| if (ret) { |
| dev_err(dev, "failed to register opp notifier: %d\n", ret); |
| goto out_remove_opp_table; |
| } |
| return 0; |
| |
| out_remove_opp_table: |
| dev_pm_opp_of_remove_table(dev); |
| |
| out_disable_cci_clk: |
| clk_disable_unprepare(drv->cci_clk); |
| |
| out_free_resources: |
| if (regulator_is_enabled(drv->proc_reg)) |
| regulator_disable(drv->proc_reg); |
| if (drv->sram_reg && regulator_is_enabled(drv->sram_reg)) |
| regulator_disable(drv->sram_reg); |
| |
| return ret; |
| } |
| |
| static int mtk_ccifreq_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct mtk_ccifreq_drv *drv; |
| |
| drv = platform_get_drvdata(pdev); |
| |
| dev_pm_opp_unregister_notifier(dev, &drv->opp_nb); |
| dev_pm_opp_of_remove_table(dev); |
| clk_disable_unprepare(drv->cci_clk); |
| regulator_disable(drv->proc_reg); |
| if (drv->sram_reg) |
| regulator_disable(drv->sram_reg); |
| |
| return 0; |
| } |
| |
| static const struct mtk_ccifreq_platform_data mt8183_platform_data = { |
| .min_volt_shift = 100000, |
| .max_volt_shift = 200000, |
| .proc_max_volt = 1150000, |
| }; |
| |
| static const struct mtk_ccifreq_platform_data mt8186_platform_data = { |
| .min_volt_shift = 100000, |
| .max_volt_shift = 250000, |
| .proc_max_volt = 1118750, |
| .sram_min_volt = 850000, |
| .sram_max_volt = 1118750, |
| }; |
| |
| static const struct of_device_id mtk_ccifreq_machines[] = { |
| { .compatible = "mediatek,mt8183-cci", .data = &mt8183_platform_data }, |
| { .compatible = "mediatek,mt8186-cci", .data = &mt8186_platform_data }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, mtk_ccifreq_machines); |
| |
| static struct platform_driver mtk_ccifreq_platdrv = { |
| .probe = mtk_ccifreq_probe, |
| .remove = mtk_ccifreq_remove, |
| .driver = { |
| .name = "mtk-ccifreq", |
| .of_match_table = mtk_ccifreq_machines, |
| }, |
| }; |
| module_platform_driver(mtk_ccifreq_platdrv); |
| |
| MODULE_DESCRIPTION("MediaTek CCI devfreq driver"); |
| MODULE_AUTHOR("Jia-Wei Chang <jia-wei.chang@mediatek.com>"); |
| MODULE_LICENSE("GPL v2"); |