|  | /* | 
|  | *  arch/s390/kernel/setup.c | 
|  | * | 
|  | *  S390 version | 
|  | *    Copyright (C) IBM Corp. 1999,2010 | 
|  | *    Author(s): Hartmut Penner (hp@de.ibm.com), | 
|  | *               Martin Schwidefsky (schwidefsky@de.ibm.com) | 
|  | * | 
|  | *  Derived from "arch/i386/kernel/setup.c" | 
|  | *    Copyright (C) 1995, Linus Torvalds | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * This file handles the architecture-dependent parts of initialization | 
|  | */ | 
|  |  | 
|  | #define KMSG_COMPONENT "setup" | 
|  | #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt | 
|  |  | 
|  | #include <linux/errno.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/stddef.h> | 
|  | #include <linux/unistd.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/user.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/initrd.h> | 
|  | #include <linux/bootmem.h> | 
|  | #include <linux/root_dev.h> | 
|  | #include <linux/console.h> | 
|  | #include <linux/kernel_stat.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/pfn.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/topology.h> | 
|  | #include <linux/ftrace.h> | 
|  |  | 
|  | #include <asm/ipl.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/system.h> | 
|  | #include <asm/smp.h> | 
|  | #include <asm/mmu_context.h> | 
|  | #include <asm/cpcmd.h> | 
|  | #include <asm/lowcore.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/ptrace.h> | 
|  | #include <asm/sections.h> | 
|  | #include <asm/ebcdic.h> | 
|  | #include <asm/compat.h> | 
|  | #include <asm/kvm_virtio.h> | 
|  |  | 
|  | long psw_kernel_bits	= (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY | | 
|  | PSW_MASK_MCHECK | PSW_DEFAULT_KEY); | 
|  | long psw_user_bits	= (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME | | 
|  | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | | 
|  | PSW_MASK_PSTATE | PSW_DEFAULT_KEY); | 
|  |  | 
|  | /* | 
|  | * User copy operations. | 
|  | */ | 
|  | struct uaccess_ops uaccess; | 
|  | EXPORT_SYMBOL(uaccess); | 
|  |  | 
|  | /* | 
|  | * Machine setup.. | 
|  | */ | 
|  | unsigned int console_mode = 0; | 
|  | EXPORT_SYMBOL(console_mode); | 
|  |  | 
|  | unsigned int console_devno = -1; | 
|  | EXPORT_SYMBOL(console_devno); | 
|  |  | 
|  | unsigned int console_irq = -1; | 
|  | EXPORT_SYMBOL(console_irq); | 
|  |  | 
|  | unsigned long elf_hwcap = 0; | 
|  | char elf_platform[ELF_PLATFORM_SIZE]; | 
|  |  | 
|  | struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS]; | 
|  |  | 
|  | int __initdata memory_end_set; | 
|  | unsigned long __initdata memory_end; | 
|  |  | 
|  | /* An array with a pointer to the lowcore of every CPU. */ | 
|  | struct _lowcore *lowcore_ptr[NR_CPUS]; | 
|  | EXPORT_SYMBOL(lowcore_ptr); | 
|  |  | 
|  | /* | 
|  | * This is set up by the setup-routine at boot-time | 
|  | * for S390 need to find out, what we have to setup | 
|  | * using address 0x10400 ... | 
|  | */ | 
|  |  | 
|  | #include <asm/setup.h> | 
|  |  | 
|  | static struct resource code_resource = { | 
|  | .name  = "Kernel code", | 
|  | .flags = IORESOURCE_BUSY | IORESOURCE_MEM, | 
|  | }; | 
|  |  | 
|  | static struct resource data_resource = { | 
|  | .name = "Kernel data", | 
|  | .flags = IORESOURCE_BUSY | IORESOURCE_MEM, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * condev= and conmode= setup parameter. | 
|  | */ | 
|  |  | 
|  | static int __init condev_setup(char *str) | 
|  | { | 
|  | int vdev; | 
|  |  | 
|  | vdev = simple_strtoul(str, &str, 0); | 
|  | if (vdev >= 0 && vdev < 65536) { | 
|  | console_devno = vdev; | 
|  | console_irq = -1; | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | __setup("condev=", condev_setup); | 
|  |  | 
|  | static void __init set_preferred_console(void) | 
|  | { | 
|  | if (MACHINE_IS_KVM) | 
|  | add_preferred_console("hvc", 0, NULL); | 
|  | else if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP) | 
|  | add_preferred_console("ttyS", 0, NULL); | 
|  | else if (CONSOLE_IS_3270) | 
|  | add_preferred_console("tty3270", 0, NULL); | 
|  | } | 
|  |  | 
|  | static int __init conmode_setup(char *str) | 
|  | { | 
|  | #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) | 
|  | if (strncmp(str, "hwc", 4) == 0 || strncmp(str, "sclp", 5) == 0) | 
|  | SET_CONSOLE_SCLP; | 
|  | #endif | 
|  | #if defined(CONFIG_TN3215_CONSOLE) | 
|  | if (strncmp(str, "3215", 5) == 0) | 
|  | SET_CONSOLE_3215; | 
|  | #endif | 
|  | #if defined(CONFIG_TN3270_CONSOLE) | 
|  | if (strncmp(str, "3270", 5) == 0) | 
|  | SET_CONSOLE_3270; | 
|  | #endif | 
|  | set_preferred_console(); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | __setup("conmode=", conmode_setup); | 
|  |  | 
|  | static void __init conmode_default(void) | 
|  | { | 
|  | char query_buffer[1024]; | 
|  | char *ptr; | 
|  |  | 
|  | if (MACHINE_IS_VM) { | 
|  | cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL); | 
|  | console_devno = simple_strtoul(query_buffer + 5, NULL, 16); | 
|  | ptr = strstr(query_buffer, "SUBCHANNEL ="); | 
|  | console_irq = simple_strtoul(ptr + 13, NULL, 16); | 
|  | cpcmd("QUERY TERM", query_buffer, 1024, NULL); | 
|  | ptr = strstr(query_buffer, "CONMODE"); | 
|  | /* | 
|  | * Set the conmode to 3215 so that the device recognition | 
|  | * will set the cu_type of the console to 3215. If the | 
|  | * conmode is 3270 and we don't set it back then both | 
|  | * 3215 and the 3270 driver will try to access the console | 
|  | * device (3215 as console and 3270 as normal tty). | 
|  | */ | 
|  | cpcmd("TERM CONMODE 3215", NULL, 0, NULL); | 
|  | if (ptr == NULL) { | 
|  | #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) | 
|  | SET_CONSOLE_SCLP; | 
|  | #endif | 
|  | return; | 
|  | } | 
|  | if (strncmp(ptr + 8, "3270", 4) == 0) { | 
|  | #if defined(CONFIG_TN3270_CONSOLE) | 
|  | SET_CONSOLE_3270; | 
|  | #elif defined(CONFIG_TN3215_CONSOLE) | 
|  | SET_CONSOLE_3215; | 
|  | #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) | 
|  | SET_CONSOLE_SCLP; | 
|  | #endif | 
|  | } else if (strncmp(ptr + 8, "3215", 4) == 0) { | 
|  | #if defined(CONFIG_TN3215_CONSOLE) | 
|  | SET_CONSOLE_3215; | 
|  | #elif defined(CONFIG_TN3270_CONSOLE) | 
|  | SET_CONSOLE_3270; | 
|  | #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) | 
|  | SET_CONSOLE_SCLP; | 
|  | #endif | 
|  | } | 
|  | } else { | 
|  | #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) | 
|  | SET_CONSOLE_SCLP; | 
|  | #endif | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_ZFCPDUMP | 
|  | static void __init setup_zfcpdump(unsigned int console_devno) | 
|  | { | 
|  | static char str[41]; | 
|  |  | 
|  | if (ipl_info.type != IPL_TYPE_FCP_DUMP) | 
|  | return; | 
|  | if (console_devno != -1) | 
|  | sprintf(str, " cio_ignore=all,!0.0.%04x,!0.0.%04x", | 
|  | ipl_info.data.fcp.dev_id.devno, console_devno); | 
|  | else | 
|  | sprintf(str, " cio_ignore=all,!0.0.%04x", | 
|  | ipl_info.data.fcp.dev_id.devno); | 
|  | strcat(boot_command_line, str); | 
|  | console_loglevel = 2; | 
|  | } | 
|  | #else | 
|  | static inline void setup_zfcpdump(unsigned int console_devno) {} | 
|  | #endif /* CONFIG_ZFCPDUMP */ | 
|  |  | 
|  | /* | 
|  | * Reboot, halt and power_off stubs. They just call _machine_restart, | 
|  | * _machine_halt or _machine_power_off. | 
|  | */ | 
|  |  | 
|  | void machine_restart(char *command) | 
|  | { | 
|  | if ((!in_interrupt() && !in_atomic()) || oops_in_progress) | 
|  | /* | 
|  | * Only unblank the console if we are called in enabled | 
|  | * context or a bust_spinlocks cleared the way for us. | 
|  | */ | 
|  | console_unblank(); | 
|  | _machine_restart(command); | 
|  | } | 
|  |  | 
|  | void machine_halt(void) | 
|  | { | 
|  | if (!in_interrupt() || oops_in_progress) | 
|  | /* | 
|  | * Only unblank the console if we are called in enabled | 
|  | * context or a bust_spinlocks cleared the way for us. | 
|  | */ | 
|  | console_unblank(); | 
|  | _machine_halt(); | 
|  | } | 
|  |  | 
|  | void machine_power_off(void) | 
|  | { | 
|  | if (!in_interrupt() || oops_in_progress) | 
|  | /* | 
|  | * Only unblank the console if we are called in enabled | 
|  | * context or a bust_spinlocks cleared the way for us. | 
|  | */ | 
|  | console_unblank(); | 
|  | _machine_power_off(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Dummy power off function. | 
|  | */ | 
|  | void (*pm_power_off)(void) = machine_power_off; | 
|  |  | 
|  | static int __init early_parse_mem(char *p) | 
|  | { | 
|  | memory_end = memparse(p, &p); | 
|  | memory_end_set = 1; | 
|  | return 0; | 
|  | } | 
|  | early_param("mem", early_parse_mem); | 
|  |  | 
|  | unsigned int user_mode = HOME_SPACE_MODE; | 
|  | EXPORT_SYMBOL_GPL(user_mode); | 
|  |  | 
|  | static int set_amode_and_uaccess(unsigned long user_amode, | 
|  | unsigned long user32_amode) | 
|  | { | 
|  | psw_user_bits = PSW_BASE_BITS | PSW_MASK_DAT | user_amode | | 
|  | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | | 
|  | PSW_MASK_PSTATE | PSW_DEFAULT_KEY; | 
|  | #ifdef CONFIG_COMPAT | 
|  | psw_user32_bits = PSW_BASE32_BITS | PSW_MASK_DAT | user_amode | | 
|  | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | | 
|  | PSW_MASK_PSTATE | PSW_DEFAULT_KEY; | 
|  | psw32_user_bits = PSW32_BASE_BITS | PSW32_MASK_DAT | user32_amode | | 
|  | PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK | | 
|  | PSW32_MASK_PSTATE; | 
|  | #endif | 
|  | psw_kernel_bits = PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME | | 
|  | PSW_MASK_MCHECK | PSW_DEFAULT_KEY; | 
|  |  | 
|  | if (MACHINE_HAS_MVCOS) { | 
|  | memcpy(&uaccess, &uaccess_mvcos_switch, sizeof(uaccess)); | 
|  | return 1; | 
|  | } else { | 
|  | memcpy(&uaccess, &uaccess_pt, sizeof(uaccess)); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Switch kernel/user addressing modes? | 
|  | */ | 
|  | static int __init early_parse_switch_amode(char *p) | 
|  | { | 
|  | if (user_mode != SECONDARY_SPACE_MODE) | 
|  | user_mode = PRIMARY_SPACE_MODE; | 
|  | return 0; | 
|  | } | 
|  | early_param("switch_amode", early_parse_switch_amode); | 
|  |  | 
|  | static int __init early_parse_user_mode(char *p) | 
|  | { | 
|  | if (p && strcmp(p, "primary") == 0) | 
|  | user_mode = PRIMARY_SPACE_MODE; | 
|  | #ifdef CONFIG_S390_EXEC_PROTECT | 
|  | else if (p && strcmp(p, "secondary") == 0) | 
|  | user_mode = SECONDARY_SPACE_MODE; | 
|  | #endif | 
|  | else if (!p || strcmp(p, "home") == 0) | 
|  | user_mode = HOME_SPACE_MODE; | 
|  | else | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  | early_param("user_mode", early_parse_user_mode); | 
|  |  | 
|  | #ifdef CONFIG_S390_EXEC_PROTECT | 
|  | /* | 
|  | * Enable execute protection? | 
|  | */ | 
|  | static int __init early_parse_noexec(char *p) | 
|  | { | 
|  | if (!strncmp(p, "off", 3)) | 
|  | return 0; | 
|  | user_mode = SECONDARY_SPACE_MODE; | 
|  | return 0; | 
|  | } | 
|  | early_param("noexec", early_parse_noexec); | 
|  | #endif /* CONFIG_S390_EXEC_PROTECT */ | 
|  |  | 
|  | static void setup_addressing_mode(void) | 
|  | { | 
|  | if (user_mode == SECONDARY_SPACE_MODE) { | 
|  | if (set_amode_and_uaccess(PSW_ASC_SECONDARY, | 
|  | PSW32_ASC_SECONDARY)) | 
|  | pr_info("Execute protection active, " | 
|  | "mvcos available\n"); | 
|  | else | 
|  | pr_info("Execute protection active, " | 
|  | "mvcos not available\n"); | 
|  | } else if (user_mode == PRIMARY_SPACE_MODE) { | 
|  | if (set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY)) | 
|  | pr_info("Address spaces switched, " | 
|  | "mvcos available\n"); | 
|  | else | 
|  | pr_info("Address spaces switched, " | 
|  | "mvcos not available\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __init | 
|  | setup_lowcore(void) | 
|  | { | 
|  | struct _lowcore *lc; | 
|  |  | 
|  | /* | 
|  | * Setup lowcore for boot cpu | 
|  | */ | 
|  | BUILD_BUG_ON(sizeof(struct _lowcore) != LC_PAGES * 4096); | 
|  | lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0); | 
|  | lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY; | 
|  | lc->restart_psw.addr = | 
|  | PSW_ADDR_AMODE | (unsigned long) restart_int_handler; | 
|  | if (user_mode != HOME_SPACE_MODE) | 
|  | lc->restart_psw.mask |= PSW_ASC_HOME; | 
|  | lc->external_new_psw.mask = psw_kernel_bits; | 
|  | lc->external_new_psw.addr = | 
|  | PSW_ADDR_AMODE | (unsigned long) ext_int_handler; | 
|  | lc->svc_new_psw.mask = psw_kernel_bits | PSW_MASK_IO | PSW_MASK_EXT; | 
|  | lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call; | 
|  | lc->program_new_psw.mask = psw_kernel_bits; | 
|  | lc->program_new_psw.addr = | 
|  | PSW_ADDR_AMODE | (unsigned long)pgm_check_handler; | 
|  | lc->mcck_new_psw.mask = | 
|  | psw_kernel_bits & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT; | 
|  | lc->mcck_new_psw.addr = | 
|  | PSW_ADDR_AMODE | (unsigned long) mcck_int_handler; | 
|  | lc->io_new_psw.mask = psw_kernel_bits; | 
|  | lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler; | 
|  | lc->clock_comparator = -1ULL; | 
|  | lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE; | 
|  | lc->async_stack = (unsigned long) | 
|  | __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE; | 
|  | lc->panic_stack = (unsigned long) | 
|  | __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE; | 
|  | lc->current_task = (unsigned long) init_thread_union.thread_info.task; | 
|  | lc->thread_info = (unsigned long) &init_thread_union; | 
|  | lc->machine_flags = S390_lowcore.machine_flags; | 
|  | #ifndef CONFIG_64BIT | 
|  | if (MACHINE_HAS_IEEE) { | 
|  | lc->extended_save_area_addr = (__u32) | 
|  | __alloc_bootmem_low(PAGE_SIZE, PAGE_SIZE, 0); | 
|  | /* enable extended save area */ | 
|  | __ctl_set_bit(14, 29); | 
|  | } | 
|  | #else | 
|  | lc->cmf_hpp = -1ULL; | 
|  | lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0]; | 
|  | #endif | 
|  | lc->sync_enter_timer = S390_lowcore.sync_enter_timer; | 
|  | lc->async_enter_timer = S390_lowcore.async_enter_timer; | 
|  | lc->exit_timer = S390_lowcore.exit_timer; | 
|  | lc->user_timer = S390_lowcore.user_timer; | 
|  | lc->system_timer = S390_lowcore.system_timer; | 
|  | lc->steal_timer = S390_lowcore.steal_timer; | 
|  | lc->last_update_timer = S390_lowcore.last_update_timer; | 
|  | lc->last_update_clock = S390_lowcore.last_update_clock; | 
|  | lc->ftrace_func = S390_lowcore.ftrace_func; | 
|  | set_prefix((u32)(unsigned long) lc); | 
|  | lowcore_ptr[0] = lc; | 
|  | } | 
|  |  | 
|  | static void __init | 
|  | setup_resources(void) | 
|  | { | 
|  | struct resource *res, *sub_res; | 
|  | int i; | 
|  |  | 
|  | code_resource.start = (unsigned long) &_text; | 
|  | code_resource.end = (unsigned long) &_etext - 1; | 
|  | data_resource.start = (unsigned long) &_etext; | 
|  | data_resource.end = (unsigned long) &_edata - 1; | 
|  |  | 
|  | for (i = 0; i < MEMORY_CHUNKS; i++) { | 
|  | if (!memory_chunk[i].size) | 
|  | continue; | 
|  | res = alloc_bootmem_low(sizeof(struct resource)); | 
|  | res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; | 
|  | switch (memory_chunk[i].type) { | 
|  | case CHUNK_READ_WRITE: | 
|  | res->name = "System RAM"; | 
|  | break; | 
|  | case CHUNK_READ_ONLY: | 
|  | res->name = "System ROM"; | 
|  | res->flags |= IORESOURCE_READONLY; | 
|  | break; | 
|  | default: | 
|  | res->name = "reserved"; | 
|  | } | 
|  | res->start = memory_chunk[i].addr; | 
|  | res->end = memory_chunk[i].addr +  memory_chunk[i].size - 1; | 
|  | request_resource(&iomem_resource, res); | 
|  |  | 
|  | if (code_resource.start >= res->start  && | 
|  | code_resource.start <= res->end && | 
|  | code_resource.end > res->end) { | 
|  | sub_res = alloc_bootmem_low(sizeof(struct resource)); | 
|  | memcpy(sub_res, &code_resource, | 
|  | sizeof(struct resource)); | 
|  | sub_res->end = res->end; | 
|  | code_resource.start = res->end + 1; | 
|  | request_resource(res, sub_res); | 
|  | } | 
|  |  | 
|  | if (code_resource.start >= res->start && | 
|  | code_resource.start <= res->end && | 
|  | code_resource.end <= res->end) | 
|  | request_resource(res, &code_resource); | 
|  |  | 
|  | if (data_resource.start >= res->start && | 
|  | data_resource.start <= res->end && | 
|  | data_resource.end > res->end) { | 
|  | sub_res = alloc_bootmem_low(sizeof(struct resource)); | 
|  | memcpy(sub_res, &data_resource, | 
|  | sizeof(struct resource)); | 
|  | sub_res->end = res->end; | 
|  | data_resource.start = res->end + 1; | 
|  | request_resource(res, sub_res); | 
|  | } | 
|  |  | 
|  | if (data_resource.start >= res->start && | 
|  | data_resource.start <= res->end && | 
|  | data_resource.end <= res->end) | 
|  | request_resource(res, &data_resource); | 
|  | } | 
|  | } | 
|  |  | 
|  | unsigned long real_memory_size; | 
|  | EXPORT_SYMBOL_GPL(real_memory_size); | 
|  |  | 
|  | static void __init setup_memory_end(void) | 
|  | { | 
|  | unsigned long memory_size; | 
|  | unsigned long max_mem; | 
|  | int i; | 
|  |  | 
|  | #ifdef CONFIG_ZFCPDUMP | 
|  | if (ipl_info.type == IPL_TYPE_FCP_DUMP) { | 
|  | memory_end = ZFCPDUMP_HSA_SIZE; | 
|  | memory_end_set = 1; | 
|  | } | 
|  | #endif | 
|  | memory_size = 0; | 
|  | memory_end &= PAGE_MASK; | 
|  |  | 
|  | max_mem = memory_end ? min(VMEM_MAX_PHYS, memory_end) : VMEM_MAX_PHYS; | 
|  | memory_end = min(max_mem, memory_end); | 
|  |  | 
|  | /* | 
|  | * Make sure all chunks are MAX_ORDER aligned so we don't need the | 
|  | * extra checks that HOLES_IN_ZONE would require. | 
|  | */ | 
|  | for (i = 0; i < MEMORY_CHUNKS; i++) { | 
|  | unsigned long start, end; | 
|  | struct mem_chunk *chunk; | 
|  | unsigned long align; | 
|  |  | 
|  | chunk = &memory_chunk[i]; | 
|  | align = 1UL << (MAX_ORDER + PAGE_SHIFT - 1); | 
|  | start = (chunk->addr + align - 1) & ~(align - 1); | 
|  | end = (chunk->addr + chunk->size) & ~(align - 1); | 
|  | if (start >= end) | 
|  | memset(chunk, 0, sizeof(*chunk)); | 
|  | else { | 
|  | chunk->addr = start; | 
|  | chunk->size = end - start; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < MEMORY_CHUNKS; i++) { | 
|  | struct mem_chunk *chunk = &memory_chunk[i]; | 
|  |  | 
|  | real_memory_size = max(real_memory_size, | 
|  | chunk->addr + chunk->size); | 
|  | if (chunk->addr >= max_mem) { | 
|  | memset(chunk, 0, sizeof(*chunk)); | 
|  | continue; | 
|  | } | 
|  | if (chunk->addr + chunk->size > max_mem) | 
|  | chunk->size = max_mem - chunk->addr; | 
|  | memory_size = max(memory_size, chunk->addr + chunk->size); | 
|  | } | 
|  | if (!memory_end) | 
|  | memory_end = memory_size; | 
|  | } | 
|  |  | 
|  | static void __init | 
|  | setup_memory(void) | 
|  | { | 
|  | unsigned long bootmap_size; | 
|  | unsigned long start_pfn, end_pfn; | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * partially used pages are not usable - thus | 
|  | * we are rounding upwards: | 
|  | */ | 
|  | start_pfn = PFN_UP(__pa(&_end)); | 
|  | end_pfn = max_pfn = PFN_DOWN(memory_end); | 
|  |  | 
|  | #ifdef CONFIG_BLK_DEV_INITRD | 
|  | /* | 
|  | * Move the initrd in case the bitmap of the bootmem allocater | 
|  | * would overwrite it. | 
|  | */ | 
|  |  | 
|  | if (INITRD_START && INITRD_SIZE) { | 
|  | unsigned long bmap_size; | 
|  | unsigned long start; | 
|  |  | 
|  | bmap_size = bootmem_bootmap_pages(end_pfn - start_pfn + 1); | 
|  | bmap_size = PFN_PHYS(bmap_size); | 
|  |  | 
|  | if (PFN_PHYS(start_pfn) + bmap_size > INITRD_START) { | 
|  | start = PFN_PHYS(start_pfn) + bmap_size + PAGE_SIZE; | 
|  |  | 
|  | if (start + INITRD_SIZE > memory_end) { | 
|  | pr_err("initrd extends beyond end of " | 
|  | "memory (0x%08lx > 0x%08lx) " | 
|  | "disabling initrd\n", | 
|  | start + INITRD_SIZE, memory_end); | 
|  | INITRD_START = INITRD_SIZE = 0; | 
|  | } else { | 
|  | pr_info("Moving initrd (0x%08lx -> " | 
|  | "0x%08lx, size: %ld)\n", | 
|  | INITRD_START, start, INITRD_SIZE); | 
|  | memmove((void *) start, (void *) INITRD_START, | 
|  | INITRD_SIZE); | 
|  | INITRD_START = start; | 
|  | } | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Initialize the boot-time allocator | 
|  | */ | 
|  | bootmap_size = init_bootmem(start_pfn, end_pfn); | 
|  |  | 
|  | /* | 
|  | * Register RAM areas with the bootmem allocator. | 
|  | */ | 
|  |  | 
|  | for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { | 
|  | unsigned long start_chunk, end_chunk, pfn; | 
|  |  | 
|  | if (memory_chunk[i].type != CHUNK_READ_WRITE) | 
|  | continue; | 
|  | start_chunk = PFN_DOWN(memory_chunk[i].addr); | 
|  | end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size); | 
|  | end_chunk = min(end_chunk, end_pfn); | 
|  | if (start_chunk >= end_chunk) | 
|  | continue; | 
|  | add_active_range(0, start_chunk, end_chunk); | 
|  | pfn = max(start_chunk, start_pfn); | 
|  | for (; pfn < end_chunk; pfn++) | 
|  | page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY); | 
|  | } | 
|  |  | 
|  | psw_set_key(PAGE_DEFAULT_KEY); | 
|  |  | 
|  | free_bootmem_with_active_regions(0, max_pfn); | 
|  |  | 
|  | /* | 
|  | * Reserve memory used for lowcore/command line/kernel image. | 
|  | */ | 
|  | reserve_bootmem(0, (unsigned long)_ehead, BOOTMEM_DEFAULT); | 
|  | reserve_bootmem((unsigned long)_stext, | 
|  | PFN_PHYS(start_pfn) - (unsigned long)_stext, | 
|  | BOOTMEM_DEFAULT); | 
|  | /* | 
|  | * Reserve the bootmem bitmap itself as well. We do this in two | 
|  | * steps (first step was init_bootmem()) because this catches | 
|  | * the (very unlikely) case of us accidentally initializing the | 
|  | * bootmem allocator with an invalid RAM area. | 
|  | */ | 
|  | reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size, | 
|  | BOOTMEM_DEFAULT); | 
|  |  | 
|  | #ifdef CONFIG_BLK_DEV_INITRD | 
|  | if (INITRD_START && INITRD_SIZE) { | 
|  | if (INITRD_START + INITRD_SIZE <= memory_end) { | 
|  | reserve_bootmem(INITRD_START, INITRD_SIZE, | 
|  | BOOTMEM_DEFAULT); | 
|  | initrd_start = INITRD_START; | 
|  | initrd_end = initrd_start + INITRD_SIZE; | 
|  | } else { | 
|  | pr_err("initrd extends beyond end of " | 
|  | "memory (0x%08lx > 0x%08lx) " | 
|  | "disabling initrd\n", | 
|  | initrd_start + INITRD_SIZE, memory_end); | 
|  | initrd_start = initrd_end = 0; | 
|  | } | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Setup hardware capabilities. | 
|  | */ | 
|  | static void __init setup_hwcaps(void) | 
|  | { | 
|  | static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 }; | 
|  | unsigned long long facility_list_extended; | 
|  | unsigned int facility_list; | 
|  | struct cpuid cpu_id; | 
|  | int i; | 
|  |  | 
|  | facility_list = stfl(); | 
|  | /* | 
|  | * The store facility list bits numbers as found in the principles | 
|  | * of operation are numbered with bit 1UL<<31 as number 0 to | 
|  | * bit 1UL<<0 as number 31. | 
|  | *   Bit 0: instructions named N3, "backported" to esa-mode | 
|  | *   Bit 2: z/Architecture mode is active | 
|  | *   Bit 7: the store-facility-list-extended facility is installed | 
|  | *   Bit 17: the message-security assist is installed | 
|  | *   Bit 19: the long-displacement facility is installed | 
|  | *   Bit 21: the extended-immediate facility is installed | 
|  | *   Bit 22: extended-translation facility 3 is installed | 
|  | *   Bit 30: extended-translation facility 3 enhancement facility | 
|  | * These get translated to: | 
|  | *   HWCAP_S390_ESAN3 bit 0, HWCAP_S390_ZARCH bit 1, | 
|  | *   HWCAP_S390_STFLE bit 2, HWCAP_S390_MSA bit 3, | 
|  | *   HWCAP_S390_LDISP bit 4, HWCAP_S390_EIMM bit 5 and | 
|  | *   HWCAP_S390_ETF3EH bit 8 (22 && 30). | 
|  | */ | 
|  | for (i = 0; i < 6; i++) | 
|  | if (facility_list & (1UL << (31 - stfl_bits[i]))) | 
|  | elf_hwcap |= 1UL << i; | 
|  |  | 
|  | if ((facility_list & (1UL << (31 - 22))) | 
|  | && (facility_list & (1UL << (31 - 30)))) | 
|  | elf_hwcap |= HWCAP_S390_ETF3EH; | 
|  |  | 
|  | /* | 
|  | * Check for additional facilities with store-facility-list-extended. | 
|  | * stfle stores doublewords (8 byte) with bit 1ULL<<63 as bit 0 | 
|  | * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information | 
|  | * as stored by stfl, bits 32-xxx contain additional facilities. | 
|  | * How many facility words are stored depends on the number of | 
|  | * doublewords passed to the instruction. The additional facilites | 
|  | * are: | 
|  | *   Bit 42: decimal floating point facility is installed | 
|  | *   Bit 44: perform floating point operation facility is installed | 
|  | * translated to: | 
|  | *   HWCAP_S390_DFP bit 6 (42 && 44). | 
|  | */ | 
|  | if ((elf_hwcap & (1UL << 2)) && | 
|  | __stfle(&facility_list_extended, 1) > 0) { | 
|  | if ((facility_list_extended & (1ULL << (63 - 42))) | 
|  | && (facility_list_extended & (1ULL << (63 - 44)))) | 
|  | elf_hwcap |= HWCAP_S390_DFP; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Huge page support HWCAP_S390_HPAGE is bit 7. | 
|  | */ | 
|  | if (MACHINE_HAS_HPAGE) | 
|  | elf_hwcap |= HWCAP_S390_HPAGE; | 
|  |  | 
|  | /* | 
|  | * 64-bit register support for 31-bit processes | 
|  | * HWCAP_S390_HIGH_GPRS is bit 9. | 
|  | */ | 
|  | elf_hwcap |= HWCAP_S390_HIGH_GPRS; | 
|  |  | 
|  | get_cpu_id(&cpu_id); | 
|  | switch (cpu_id.machine) { | 
|  | case 0x9672: | 
|  | #if !defined(CONFIG_64BIT) | 
|  | default:	/* Use "g5" as default for 31 bit kernels. */ | 
|  | #endif | 
|  | strcpy(elf_platform, "g5"); | 
|  | break; | 
|  | case 0x2064: | 
|  | case 0x2066: | 
|  | #if defined(CONFIG_64BIT) | 
|  | default:	/* Use "z900" as default for 64 bit kernels. */ | 
|  | #endif | 
|  | strcpy(elf_platform, "z900"); | 
|  | break; | 
|  | case 0x2084: | 
|  | case 0x2086: | 
|  | strcpy(elf_platform, "z990"); | 
|  | break; | 
|  | case 0x2094: | 
|  | case 0x2096: | 
|  | strcpy(elf_platform, "z9-109"); | 
|  | break; | 
|  | case 0x2097: | 
|  | case 0x2098: | 
|  | strcpy(elf_platform, "z10"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Setup function called from init/main.c just after the banner | 
|  | * was printed. | 
|  | */ | 
|  |  | 
|  | void __init | 
|  | setup_arch(char **cmdline_p) | 
|  | { | 
|  | /* | 
|  | * print what head.S has found out about the machine | 
|  | */ | 
|  | #ifndef CONFIG_64BIT | 
|  | if (MACHINE_IS_VM) | 
|  | pr_info("Linux is running as a z/VM " | 
|  | "guest operating system in 31-bit mode\n"); | 
|  | else if (MACHINE_IS_LPAR) | 
|  | pr_info("Linux is running natively in 31-bit mode\n"); | 
|  | if (MACHINE_HAS_IEEE) | 
|  | pr_info("The hardware system has IEEE compatible " | 
|  | "floating point units\n"); | 
|  | else | 
|  | pr_info("The hardware system has no IEEE compatible " | 
|  | "floating point units\n"); | 
|  | #else /* CONFIG_64BIT */ | 
|  | if (MACHINE_IS_VM) | 
|  | pr_info("Linux is running as a z/VM " | 
|  | "guest operating system in 64-bit mode\n"); | 
|  | else if (MACHINE_IS_KVM) | 
|  | pr_info("Linux is running under KVM in 64-bit mode\n"); | 
|  | else if (MACHINE_IS_LPAR) | 
|  | pr_info("Linux is running natively in 64-bit mode\n"); | 
|  | #endif /* CONFIG_64BIT */ | 
|  |  | 
|  | /* Have one command line that is parsed and saved in /proc/cmdline */ | 
|  | /* boot_command_line has been already set up in early.c */ | 
|  | *cmdline_p = boot_command_line; | 
|  |  | 
|  | ROOT_DEV = Root_RAM0; | 
|  |  | 
|  | init_mm.start_code = PAGE_OFFSET; | 
|  | init_mm.end_code = (unsigned long) &_etext; | 
|  | init_mm.end_data = (unsigned long) &_edata; | 
|  | init_mm.brk = (unsigned long) &_end; | 
|  |  | 
|  | if (MACHINE_HAS_MVCOS) | 
|  | memcpy(&uaccess, &uaccess_mvcos, sizeof(uaccess)); | 
|  | else | 
|  | memcpy(&uaccess, &uaccess_std, sizeof(uaccess)); | 
|  |  | 
|  | parse_early_param(); | 
|  |  | 
|  | setup_ipl(); | 
|  | setup_memory_end(); | 
|  | setup_addressing_mode(); | 
|  | setup_memory(); | 
|  | setup_resources(); | 
|  | setup_lowcore(); | 
|  |  | 
|  | cpu_init(); | 
|  | s390_init_cpu_topology(); | 
|  |  | 
|  | /* | 
|  | * Setup capabilities (ELF_HWCAP & ELF_PLATFORM). | 
|  | */ | 
|  | setup_hwcaps(); | 
|  |  | 
|  | /* | 
|  | * Create kernel page tables and switch to virtual addressing. | 
|  | */ | 
|  | paging_init(); | 
|  |  | 
|  | /* Setup default console */ | 
|  | conmode_default(); | 
|  | set_preferred_console(); | 
|  |  | 
|  | /* Setup zfcpdump support */ | 
|  | setup_zfcpdump(console_devno); | 
|  | } |