| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * skl-nhlt.c - Intel SKL Platform NHLT parsing |
| * |
| * Copyright (C) 2015 Intel Corp |
| * Author: Sanjiv Kumar <sanjiv.kumar@intel.com> |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| #include <linux/pci.h> |
| #include <sound/intel-nhlt.h> |
| #include "skl.h" |
| #include "skl-i2s.h" |
| |
| static struct nhlt_specific_cfg *skl_get_specific_cfg( |
| struct device *dev, struct nhlt_fmt *fmt, |
| u8 no_ch, u32 rate, u16 bps, u8 linktype) |
| { |
| struct nhlt_specific_cfg *sp_config; |
| struct wav_fmt *wfmt; |
| struct nhlt_fmt_cfg *fmt_config = fmt->fmt_config; |
| int i; |
| |
| dev_dbg(dev, "Format count =%d\n", fmt->fmt_count); |
| |
| for (i = 0; i < fmt->fmt_count; i++) { |
| wfmt = &fmt_config->fmt_ext.fmt; |
| dev_dbg(dev, "ch=%d fmt=%d s_rate=%d\n", wfmt->channels, |
| wfmt->bits_per_sample, wfmt->samples_per_sec); |
| if (wfmt->channels == no_ch && wfmt->bits_per_sample == bps) { |
| /* |
| * if link type is dmic ignore rate check as the blob is |
| * generic for all rates |
| */ |
| sp_config = &fmt_config->config; |
| if (linktype == NHLT_LINK_DMIC) |
| return sp_config; |
| |
| if (wfmt->samples_per_sec == rate) |
| return sp_config; |
| } |
| |
| fmt_config = (struct nhlt_fmt_cfg *)(fmt_config->config.caps + |
| fmt_config->config.size); |
| } |
| |
| return NULL; |
| } |
| |
| static void dump_config(struct device *dev, u32 instance_id, u8 linktype, |
| u8 s_fmt, u8 num_channels, u32 s_rate, u8 dirn, u16 bps) |
| { |
| dev_dbg(dev, "Input configuration\n"); |
| dev_dbg(dev, "ch=%d fmt=%d s_rate=%d\n", num_channels, s_fmt, s_rate); |
| dev_dbg(dev, "vbus_id=%d link_type=%d\n", instance_id, linktype); |
| dev_dbg(dev, "bits_per_sample=%d\n", bps); |
| } |
| |
| static bool skl_check_ep_match(struct device *dev, struct nhlt_endpoint *epnt, |
| u32 instance_id, u8 link_type, u8 dirn, u8 dev_type) |
| { |
| dev_dbg(dev, "vbus_id=%d link_type=%d dir=%d dev_type = %d\n", |
| epnt->virtual_bus_id, epnt->linktype, |
| epnt->direction, epnt->device_type); |
| |
| if ((epnt->virtual_bus_id == instance_id) && |
| (epnt->linktype == link_type) && |
| (epnt->direction == dirn)) { |
| /* do not check dev_type for DMIC link type */ |
| if (epnt->linktype == NHLT_LINK_DMIC) |
| return true; |
| |
| if (epnt->device_type == dev_type) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| struct nhlt_specific_cfg |
| *skl_get_ep_blob(struct skl_dev *skl, u32 instance, u8 link_type, |
| u8 s_fmt, u8 num_ch, u32 s_rate, |
| u8 dirn, u8 dev_type) |
| { |
| struct nhlt_fmt *fmt; |
| struct nhlt_endpoint *epnt; |
| struct hdac_bus *bus = skl_to_bus(skl); |
| struct device *dev = bus->dev; |
| struct nhlt_specific_cfg *sp_config; |
| struct nhlt_acpi_table *nhlt = skl->nhlt; |
| u16 bps = (s_fmt == 16) ? 16 : 32; |
| u8 j; |
| |
| dump_config(dev, instance, link_type, s_fmt, num_ch, s_rate, dirn, bps); |
| |
| epnt = (struct nhlt_endpoint *)nhlt->desc; |
| |
| dev_dbg(dev, "endpoint count =%d\n", nhlt->endpoint_count); |
| |
| for (j = 0; j < nhlt->endpoint_count; j++) { |
| if (skl_check_ep_match(dev, epnt, instance, link_type, |
| dirn, dev_type)) { |
| fmt = (struct nhlt_fmt *)(epnt->config.caps + |
| epnt->config.size); |
| sp_config = skl_get_specific_cfg(dev, fmt, num_ch, |
| s_rate, bps, link_type); |
| if (sp_config) |
| return sp_config; |
| } |
| |
| epnt = (struct nhlt_endpoint *)((u8 *)epnt + epnt->length); |
| } |
| |
| return NULL; |
| } |
| |
| static void skl_nhlt_trim_space(char *trim) |
| { |
| char *s = trim; |
| int cnt; |
| int i; |
| |
| cnt = 0; |
| for (i = 0; s[i]; i++) { |
| if (!isspace(s[i])) |
| s[cnt++] = s[i]; |
| } |
| |
| s[cnt] = '\0'; |
| } |
| |
| int skl_nhlt_update_topology_bin(struct skl_dev *skl) |
| { |
| struct nhlt_acpi_table *nhlt = (struct nhlt_acpi_table *)skl->nhlt; |
| struct hdac_bus *bus = skl_to_bus(skl); |
| struct device *dev = bus->dev; |
| |
| dev_dbg(dev, "oem_id %.6s, oem_table_id %.8s oem_revision %d\n", |
| nhlt->header.oem_id, nhlt->header.oem_table_id, |
| nhlt->header.oem_revision); |
| |
| snprintf(skl->tplg_name, sizeof(skl->tplg_name), "%x-%.6s-%.8s-%d%s", |
| skl->pci_id, nhlt->header.oem_id, nhlt->header.oem_table_id, |
| nhlt->header.oem_revision, "-tplg.bin"); |
| |
| skl_nhlt_trim_space(skl->tplg_name); |
| |
| return 0; |
| } |
| |
| static ssize_t platform_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct pci_dev *pci = to_pci_dev(dev); |
| struct hdac_bus *bus = pci_get_drvdata(pci); |
| struct skl_dev *skl = bus_to_skl(bus); |
| struct nhlt_acpi_table *nhlt = (struct nhlt_acpi_table *)skl->nhlt; |
| char platform_id[32]; |
| |
| sprintf(platform_id, "%x-%.6s-%.8s-%d", skl->pci_id, |
| nhlt->header.oem_id, nhlt->header.oem_table_id, |
| nhlt->header.oem_revision); |
| |
| skl_nhlt_trim_space(platform_id); |
| return sprintf(buf, "%s\n", platform_id); |
| } |
| |
| static DEVICE_ATTR_RO(platform_id); |
| |
| int skl_nhlt_create_sysfs(struct skl_dev *skl) |
| { |
| struct device *dev = &skl->pci->dev; |
| |
| if (sysfs_create_file(&dev->kobj, &dev_attr_platform_id.attr)) |
| dev_warn(dev, "Error creating sysfs entry\n"); |
| |
| return 0; |
| } |
| |
| void skl_nhlt_remove_sysfs(struct skl_dev *skl) |
| { |
| struct device *dev = &skl->pci->dev; |
| |
| if (skl->nhlt) |
| sysfs_remove_file(&dev->kobj, &dev_attr_platform_id.attr); |
| } |
| |
| /* |
| * Queries NHLT for all the fmt configuration for a particular endpoint and |
| * stores all possible rates supported in a rate table for the corresponding |
| * sclk/sclkfs. |
| */ |
| static void skl_get_ssp_clks(struct skl_dev *skl, struct skl_ssp_clk *ssp_clks, |
| struct nhlt_fmt *fmt, u8 id) |
| { |
| struct skl_i2s_config_blob_ext *i2s_config_ext; |
| struct skl_i2s_config_blob_legacy *i2s_config; |
| struct skl_clk_parent_src *parent; |
| struct skl_ssp_clk *sclk, *sclkfs; |
| struct nhlt_fmt_cfg *fmt_cfg; |
| struct wav_fmt_ext *wav_fmt; |
| unsigned long rate; |
| bool present = false; |
| int rate_index = 0; |
| u16 channels, bps; |
| u8 clk_src; |
| int i, j; |
| u32 fs; |
| |
| sclk = &ssp_clks[SKL_SCLK_OFS]; |
| sclkfs = &ssp_clks[SKL_SCLKFS_OFS]; |
| |
| if (fmt->fmt_count == 0) |
| return; |
| |
| for (i = 0; i < fmt->fmt_count; i++) { |
| fmt_cfg = &fmt->fmt_config[i]; |
| wav_fmt = &fmt_cfg->fmt_ext; |
| |
| channels = wav_fmt->fmt.channels; |
| bps = wav_fmt->fmt.bits_per_sample; |
| fs = wav_fmt->fmt.samples_per_sec; |
| |
| /* |
| * In case of TDM configuration on a ssp, there can |
| * be more than one blob in which channel masks are |
| * different for each usecase for a specific rate and bps. |
| * But the sclk rate will be generated for the total |
| * number of channels used for that endpoint. |
| * |
| * So for the given fs and bps, choose blob which has |
| * the superset of all channels for that endpoint and |
| * derive the rate. |
| */ |
| for (j = i; j < fmt->fmt_count; j++) { |
| fmt_cfg = &fmt->fmt_config[j]; |
| wav_fmt = &fmt_cfg->fmt_ext; |
| if ((fs == wav_fmt->fmt.samples_per_sec) && |
| (bps == wav_fmt->fmt.bits_per_sample)) |
| channels = max_t(u16, channels, |
| wav_fmt->fmt.channels); |
| } |
| |
| rate = channels * bps * fs; |
| |
| /* check if the rate is added already to the given SSP's sclk */ |
| for (j = 0; (j < SKL_MAX_CLK_RATES) && |
| (sclk[id].rate_cfg[j].rate != 0); j++) { |
| if (sclk[id].rate_cfg[j].rate == rate) { |
| present = true; |
| break; |
| } |
| } |
| |
| /* Fill rate and parent for sclk/sclkfs */ |
| if (!present) { |
| i2s_config_ext = (struct skl_i2s_config_blob_ext *) |
| fmt->fmt_config[0].config.caps; |
| |
| /* MCLK Divider Source Select */ |
| if (is_legacy_blob(i2s_config_ext->hdr.sig)) { |
| i2s_config = ext_to_legacy_blob(i2s_config_ext); |
| clk_src = get_clk_src(i2s_config->mclk, |
| SKL_MNDSS_DIV_CLK_SRC_MASK); |
| } else { |
| clk_src = get_clk_src(i2s_config_ext->mclk, |
| SKL_MNDSS_DIV_CLK_SRC_MASK); |
| } |
| |
| parent = skl_get_parent_clk(clk_src); |
| |
| /* |
| * Do not copy the config data if there is no parent |
| * clock available for this clock source select |
| */ |
| if (!parent) |
| continue; |
| |
| sclk[id].rate_cfg[rate_index].rate = rate; |
| sclk[id].rate_cfg[rate_index].config = fmt_cfg; |
| sclkfs[id].rate_cfg[rate_index].rate = rate; |
| sclkfs[id].rate_cfg[rate_index].config = fmt_cfg; |
| sclk[id].parent_name = parent->name; |
| sclkfs[id].parent_name = parent->name; |
| |
| rate_index++; |
| } |
| } |
| } |
| |
| static void skl_get_mclk(struct skl_dev *skl, struct skl_ssp_clk *mclk, |
| struct nhlt_fmt *fmt, u8 id) |
| { |
| struct skl_i2s_config_blob_ext *i2s_config_ext; |
| struct skl_i2s_config_blob_legacy *i2s_config; |
| struct nhlt_specific_cfg *fmt_cfg; |
| struct skl_clk_parent_src *parent; |
| u32 clkdiv, div_ratio; |
| u8 clk_src; |
| |
| fmt_cfg = &fmt->fmt_config[0].config; |
| i2s_config_ext = (struct skl_i2s_config_blob_ext *)fmt_cfg->caps; |
| |
| /* MCLK Divider Source Select and divider */ |
| if (is_legacy_blob(i2s_config_ext->hdr.sig)) { |
| i2s_config = ext_to_legacy_blob(i2s_config_ext); |
| clk_src = get_clk_src(i2s_config->mclk, |
| SKL_MCLK_DIV_CLK_SRC_MASK); |
| clkdiv = i2s_config->mclk.mdivr & |
| SKL_MCLK_DIV_RATIO_MASK; |
| } else { |
| clk_src = get_clk_src(i2s_config_ext->mclk, |
| SKL_MCLK_DIV_CLK_SRC_MASK); |
| clkdiv = i2s_config_ext->mclk.mdivr[0] & |
| SKL_MCLK_DIV_RATIO_MASK; |
| } |
| |
| /* bypass divider */ |
| div_ratio = 1; |
| |
| if (clkdiv != SKL_MCLK_DIV_RATIO_MASK) |
| /* Divider is 2 + clkdiv */ |
| div_ratio = clkdiv + 2; |
| |
| /* Calculate MCLK rate from source using div value */ |
| parent = skl_get_parent_clk(clk_src); |
| if (!parent) |
| return; |
| |
| mclk[id].rate_cfg[0].rate = parent->rate/div_ratio; |
| mclk[id].rate_cfg[0].config = &fmt->fmt_config[0]; |
| mclk[id].parent_name = parent->name; |
| } |
| |
| void skl_get_clks(struct skl_dev *skl, struct skl_ssp_clk *ssp_clks) |
| { |
| struct nhlt_acpi_table *nhlt = (struct nhlt_acpi_table *)skl->nhlt; |
| struct nhlt_endpoint *epnt; |
| struct nhlt_fmt *fmt; |
| int i; |
| u8 id; |
| |
| epnt = (struct nhlt_endpoint *)nhlt->desc; |
| for (i = 0; i < nhlt->endpoint_count; i++) { |
| if (epnt->linktype == NHLT_LINK_SSP) { |
| id = epnt->virtual_bus_id; |
| |
| fmt = (struct nhlt_fmt *)(epnt->config.caps |
| + epnt->config.size); |
| |
| skl_get_ssp_clks(skl, ssp_clks, fmt, id); |
| skl_get_mclk(skl, ssp_clks, fmt, id); |
| } |
| epnt = (struct nhlt_endpoint *)((u8 *)epnt + epnt->length); |
| } |
| } |