| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * rio_cm - RapidIO Channelized Messaging Driver |
| * |
| * Copyright 2013-2016 Integrated Device Technology, Inc. |
| * Copyright (c) 2015, Prodrive Technologies |
| * Copyright (c) 2015, RapidIO Trade Association |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/delay.h> |
| #include <linux/sched.h> |
| #include <linux/rio.h> |
| #include <linux/rio_drv.h> |
| #include <linux/slab.h> |
| #include <linux/idr.h> |
| #include <linux/interrupt.h> |
| #include <linux/cdev.h> |
| #include <linux/fs.h> |
| #include <linux/poll.h> |
| #include <linux/reboot.h> |
| #include <linux/bitops.h> |
| #include <linux/printk.h> |
| #include <linux/rio_cm_cdev.h> |
| |
| #define DRV_NAME "rio_cm" |
| #define DRV_VERSION "1.0.0" |
| #define DRV_AUTHOR "Alexandre Bounine <alexandre.bounine@idt.com>" |
| #define DRV_DESC "RapidIO Channelized Messaging Driver" |
| #define DEV_NAME "rio_cm" |
| |
| /* Debug output filtering masks */ |
| enum { |
| DBG_NONE = 0, |
| DBG_INIT = BIT(0), /* driver init */ |
| DBG_EXIT = BIT(1), /* driver exit */ |
| DBG_MPORT = BIT(2), /* mport add/remove */ |
| DBG_RDEV = BIT(3), /* RapidIO device add/remove */ |
| DBG_CHOP = BIT(4), /* channel operations */ |
| DBG_WAIT = BIT(5), /* waiting for events */ |
| DBG_TX = BIT(6), /* message TX */ |
| DBG_TX_EVENT = BIT(7), /* message TX event */ |
| DBG_RX_DATA = BIT(8), /* inbound data messages */ |
| DBG_RX_CMD = BIT(9), /* inbound REQ/ACK/NACK messages */ |
| DBG_ALL = ~0, |
| }; |
| |
| #ifdef DEBUG |
| #define riocm_debug(level, fmt, arg...) \ |
| do { \ |
| if (DBG_##level & dbg_level) \ |
| pr_debug(DRV_NAME ": %s " fmt "\n", \ |
| __func__, ##arg); \ |
| } while (0) |
| #else |
| #define riocm_debug(level, fmt, arg...) \ |
| no_printk(KERN_DEBUG pr_fmt(DRV_NAME fmt "\n"), ##arg) |
| #endif |
| |
| #define riocm_warn(fmt, arg...) \ |
| pr_warn(DRV_NAME ": %s WARNING " fmt "\n", __func__, ##arg) |
| |
| #define riocm_error(fmt, arg...) \ |
| pr_err(DRV_NAME ": %s ERROR " fmt "\n", __func__, ##arg) |
| |
| |
| static int cmbox = 1; |
| module_param(cmbox, int, S_IRUGO); |
| MODULE_PARM_DESC(cmbox, "RapidIO Mailbox number (default 1)"); |
| |
| static int chstart = 256; |
| module_param(chstart, int, S_IRUGO); |
| MODULE_PARM_DESC(chstart, |
| "Start channel number for dynamic allocation (default 256)"); |
| |
| #ifdef DEBUG |
| static u32 dbg_level = DBG_NONE; |
| module_param(dbg_level, uint, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)"); |
| #endif |
| |
| MODULE_AUTHOR(DRV_AUTHOR); |
| MODULE_DESCRIPTION(DRV_DESC); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| |
| #define RIOCM_TX_RING_SIZE 128 |
| #define RIOCM_RX_RING_SIZE 128 |
| #define RIOCM_CONNECT_TO 3 /* connect response TO (in sec) */ |
| |
| #define RIOCM_MAX_CHNUM 0xffff /* Use full range of u16 field */ |
| #define RIOCM_CHNUM_AUTO 0 |
| #define RIOCM_MAX_EP_COUNT 0x10000 /* Max number of endpoints */ |
| |
| enum rio_cm_state { |
| RIO_CM_IDLE, |
| RIO_CM_CONNECT, |
| RIO_CM_CONNECTED, |
| RIO_CM_DISCONNECT, |
| RIO_CM_CHAN_BOUND, |
| RIO_CM_LISTEN, |
| RIO_CM_DESTROYING, |
| }; |
| |
| enum rio_cm_pkt_type { |
| RIO_CM_SYS = 0xaa, |
| RIO_CM_CHAN = 0x55, |
| }; |
| |
| enum rio_cm_chop { |
| CM_CONN_REQ, |
| CM_CONN_ACK, |
| CM_CONN_CLOSE, |
| CM_DATA_MSG, |
| }; |
| |
| struct rio_ch_base_bhdr { |
| u32 src_id; |
| u32 dst_id; |
| #define RIO_HDR_LETTER_MASK 0xffff0000 |
| #define RIO_HDR_MBOX_MASK 0x0000ffff |
| u8 src_mbox; |
| u8 dst_mbox; |
| u8 type; |
| } __attribute__((__packed__)); |
| |
| struct rio_ch_chan_hdr { |
| struct rio_ch_base_bhdr bhdr; |
| u8 ch_op; |
| u16 dst_ch; |
| u16 src_ch; |
| u16 msg_len; |
| u16 rsrvd; |
| } __attribute__((__packed__)); |
| |
| struct tx_req { |
| struct list_head node; |
| struct rio_dev *rdev; |
| void *buffer; |
| size_t len; |
| }; |
| |
| struct cm_dev { |
| struct list_head list; |
| struct rio_mport *mport; |
| void *rx_buf[RIOCM_RX_RING_SIZE]; |
| int rx_slots; |
| struct mutex rx_lock; |
| |
| void *tx_buf[RIOCM_TX_RING_SIZE]; |
| int tx_slot; |
| int tx_cnt; |
| int tx_ack_slot; |
| struct list_head tx_reqs; |
| spinlock_t tx_lock; |
| |
| struct list_head peers; |
| u32 npeers; |
| struct workqueue_struct *rx_wq; |
| struct work_struct rx_work; |
| }; |
| |
| struct chan_rx_ring { |
| void *buf[RIOCM_RX_RING_SIZE]; |
| int head; |
| int tail; |
| int count; |
| |
| /* Tracking RX buffers reported to upper level */ |
| void *inuse[RIOCM_RX_RING_SIZE]; |
| int inuse_cnt; |
| }; |
| |
| struct rio_channel { |
| u16 id; /* local channel ID */ |
| struct kref ref; /* channel refcount */ |
| struct file *filp; |
| struct cm_dev *cmdev; /* associated CM device object */ |
| struct rio_dev *rdev; /* remote RapidIO device */ |
| enum rio_cm_state state; |
| int error; |
| spinlock_t lock; |
| void *context; |
| u32 loc_destid; /* local destID */ |
| u32 rem_destid; /* remote destID */ |
| u16 rem_channel; /* remote channel ID */ |
| struct list_head accept_queue; |
| struct list_head ch_node; |
| struct completion comp; |
| struct completion comp_close; |
| struct chan_rx_ring rx_ring; |
| }; |
| |
| struct cm_peer { |
| struct list_head node; |
| struct rio_dev *rdev; |
| }; |
| |
| struct rio_cm_work { |
| struct work_struct work; |
| struct cm_dev *cm; |
| void *data; |
| }; |
| |
| struct conn_req { |
| struct list_head node; |
| u32 destid; /* requester destID */ |
| u16 chan; /* requester channel ID */ |
| struct cm_dev *cmdev; |
| }; |
| |
| /* |
| * A channel_dev structure represents a CM_CDEV |
| * @cdev Character device |
| * @dev Associated device object |
| */ |
| struct channel_dev { |
| struct cdev cdev; |
| struct device *dev; |
| }; |
| |
| static struct rio_channel *riocm_ch_alloc(u16 ch_num); |
| static void riocm_ch_free(struct kref *ref); |
| static int riocm_post_send(struct cm_dev *cm, struct rio_dev *rdev, |
| void *buffer, size_t len); |
| static int riocm_ch_close(struct rio_channel *ch); |
| |
| static DEFINE_SPINLOCK(idr_lock); |
| static DEFINE_IDR(ch_idr); |
| |
| static LIST_HEAD(cm_dev_list); |
| static DECLARE_RWSEM(rdev_sem); |
| |
| static struct class *dev_class; |
| static unsigned int dev_major; |
| static unsigned int dev_minor_base; |
| static dev_t dev_number; |
| static struct channel_dev riocm_cdev; |
| |
| #define is_msg_capable(src_ops, dst_ops) \ |
| ((src_ops & RIO_SRC_OPS_DATA_MSG) && \ |
| (dst_ops & RIO_DST_OPS_DATA_MSG)) |
| #define dev_cm_capable(dev) \ |
| is_msg_capable(dev->src_ops, dev->dst_ops) |
| |
| static int riocm_cmp(struct rio_channel *ch, enum rio_cm_state cmp) |
| { |
| int ret; |
| |
| spin_lock_bh(&ch->lock); |
| ret = (ch->state == cmp); |
| spin_unlock_bh(&ch->lock); |
| return ret; |
| } |
| |
| static int riocm_cmp_exch(struct rio_channel *ch, |
| enum rio_cm_state cmp, enum rio_cm_state exch) |
| { |
| int ret; |
| |
| spin_lock_bh(&ch->lock); |
| ret = (ch->state == cmp); |
| if (ret) |
| ch->state = exch; |
| spin_unlock_bh(&ch->lock); |
| return ret; |
| } |
| |
| static enum rio_cm_state riocm_exch(struct rio_channel *ch, |
| enum rio_cm_state exch) |
| { |
| enum rio_cm_state old; |
| |
| spin_lock_bh(&ch->lock); |
| old = ch->state; |
| ch->state = exch; |
| spin_unlock_bh(&ch->lock); |
| return old; |
| } |
| |
| static struct rio_channel *riocm_get_channel(u16 nr) |
| { |
| struct rio_channel *ch; |
| |
| spin_lock_bh(&idr_lock); |
| ch = idr_find(&ch_idr, nr); |
| if (ch) |
| kref_get(&ch->ref); |
| spin_unlock_bh(&idr_lock); |
| return ch; |
| } |
| |
| static void riocm_put_channel(struct rio_channel *ch) |
| { |
| kref_put(&ch->ref, riocm_ch_free); |
| } |
| |
| static void *riocm_rx_get_msg(struct cm_dev *cm) |
| { |
| void *msg; |
| int i; |
| |
| msg = rio_get_inb_message(cm->mport, cmbox); |
| if (msg) { |
| for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { |
| if (cm->rx_buf[i] == msg) { |
| cm->rx_buf[i] = NULL; |
| cm->rx_slots++; |
| break; |
| } |
| } |
| |
| if (i == RIOCM_RX_RING_SIZE) |
| riocm_warn("no record for buffer 0x%p", msg); |
| } |
| |
| return msg; |
| } |
| |
| /* |
| * riocm_rx_fill - fills a ring of receive buffers for given cm device |
| * @cm: cm_dev object |
| * @nent: max number of entries to fill |
| * |
| * Returns: none |
| */ |
| static void riocm_rx_fill(struct cm_dev *cm, int nent) |
| { |
| int i; |
| |
| if (cm->rx_slots == 0) |
| return; |
| |
| for (i = 0; i < RIOCM_RX_RING_SIZE && cm->rx_slots && nent; i++) { |
| if (cm->rx_buf[i] == NULL) { |
| cm->rx_buf[i] = kmalloc(RIO_MAX_MSG_SIZE, GFP_KERNEL); |
| if (cm->rx_buf[i] == NULL) |
| break; |
| rio_add_inb_buffer(cm->mport, cmbox, cm->rx_buf[i]); |
| cm->rx_slots--; |
| nent--; |
| } |
| } |
| } |
| |
| /* |
| * riocm_rx_free - frees all receive buffers associated with given cm device |
| * @cm: cm_dev object |
| * |
| * Returns: none |
| */ |
| static void riocm_rx_free(struct cm_dev *cm) |
| { |
| int i; |
| |
| for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { |
| if (cm->rx_buf[i] != NULL) { |
| kfree(cm->rx_buf[i]); |
| cm->rx_buf[i] = NULL; |
| } |
| } |
| } |
| |
| /* |
| * riocm_req_handler - connection request handler |
| * @cm: cm_dev object |
| * @req_data: pointer to the request packet |
| * |
| * Returns: 0 if success, or |
| * -EINVAL if channel is not in correct state, |
| * -ENODEV if cannot find a channel with specified ID, |
| * -ENOMEM if unable to allocate memory to store the request |
| */ |
| static int riocm_req_handler(struct cm_dev *cm, void *req_data) |
| { |
| struct rio_channel *ch; |
| struct conn_req *req; |
| struct rio_ch_chan_hdr *hh = req_data; |
| u16 chnum; |
| |
| chnum = ntohs(hh->dst_ch); |
| |
| ch = riocm_get_channel(chnum); |
| |
| if (!ch) |
| return -ENODEV; |
| |
| if (ch->state != RIO_CM_LISTEN) { |
| riocm_debug(RX_CMD, "channel %d is not in listen state", chnum); |
| riocm_put_channel(ch); |
| return -EINVAL; |
| } |
| |
| req = kzalloc(sizeof(*req), GFP_KERNEL); |
| if (!req) { |
| riocm_put_channel(ch); |
| return -ENOMEM; |
| } |
| |
| req->destid = ntohl(hh->bhdr.src_id); |
| req->chan = ntohs(hh->src_ch); |
| req->cmdev = cm; |
| |
| spin_lock_bh(&ch->lock); |
| list_add_tail(&req->node, &ch->accept_queue); |
| spin_unlock_bh(&ch->lock); |
| complete(&ch->comp); |
| riocm_put_channel(ch); |
| |
| return 0; |
| } |
| |
| /* |
| * riocm_resp_handler - response to connection request handler |
| * @resp_data: pointer to the response packet |
| * |
| * Returns: 0 if success, or |
| * -EINVAL if channel is not in correct state, |
| * -ENODEV if cannot find a channel with specified ID, |
| */ |
| static int riocm_resp_handler(void *resp_data) |
| { |
| struct rio_channel *ch; |
| struct rio_ch_chan_hdr *hh = resp_data; |
| u16 chnum; |
| |
| chnum = ntohs(hh->dst_ch); |
| ch = riocm_get_channel(chnum); |
| if (!ch) |
| return -ENODEV; |
| |
| if (ch->state != RIO_CM_CONNECT) { |
| riocm_put_channel(ch); |
| return -EINVAL; |
| } |
| |
| riocm_exch(ch, RIO_CM_CONNECTED); |
| ch->rem_channel = ntohs(hh->src_ch); |
| complete(&ch->comp); |
| riocm_put_channel(ch); |
| |
| return 0; |
| } |
| |
| /* |
| * riocm_close_handler - channel close request handler |
| * @req_data: pointer to the request packet |
| * |
| * Returns: 0 if success, or |
| * -ENODEV if cannot find a channel with specified ID, |
| * + error codes returned by riocm_ch_close. |
| */ |
| static int riocm_close_handler(void *data) |
| { |
| struct rio_channel *ch; |
| struct rio_ch_chan_hdr *hh = data; |
| int ret; |
| |
| riocm_debug(RX_CMD, "for ch=%d", ntohs(hh->dst_ch)); |
| |
| spin_lock_bh(&idr_lock); |
| ch = idr_find(&ch_idr, ntohs(hh->dst_ch)); |
| if (!ch) { |
| spin_unlock_bh(&idr_lock); |
| return -ENODEV; |
| } |
| idr_remove(&ch_idr, ch->id); |
| spin_unlock_bh(&idr_lock); |
| |
| riocm_exch(ch, RIO_CM_DISCONNECT); |
| |
| ret = riocm_ch_close(ch); |
| if (ret) |
| riocm_debug(RX_CMD, "riocm_ch_close() returned %d", ret); |
| |
| return 0; |
| } |
| |
| /* |
| * rio_cm_handler - function that services request (non-data) packets |
| * @cm: cm_dev object |
| * @data: pointer to the packet |
| */ |
| static void rio_cm_handler(struct cm_dev *cm, void *data) |
| { |
| struct rio_ch_chan_hdr *hdr; |
| |
| if (!rio_mport_is_running(cm->mport)) |
| goto out; |
| |
| hdr = data; |
| |
| riocm_debug(RX_CMD, "OP=%x for ch=%d from %d", |
| hdr->ch_op, ntohs(hdr->dst_ch), ntohs(hdr->src_ch)); |
| |
| switch (hdr->ch_op) { |
| case CM_CONN_REQ: |
| riocm_req_handler(cm, data); |
| break; |
| case CM_CONN_ACK: |
| riocm_resp_handler(data); |
| break; |
| case CM_CONN_CLOSE: |
| riocm_close_handler(data); |
| break; |
| default: |
| riocm_error("Invalid packet header"); |
| break; |
| } |
| out: |
| kfree(data); |
| } |
| |
| /* |
| * rio_rx_data_handler - received data packet handler |
| * @cm: cm_dev object |
| * @buf: data packet |
| * |
| * Returns: 0 if success, or |
| * -ENODEV if cannot find a channel with specified ID, |
| * -EIO if channel is not in CONNECTED state, |
| * -ENOMEM if channel RX queue is full (packet discarded) |
| */ |
| static int rio_rx_data_handler(struct cm_dev *cm, void *buf) |
| { |
| struct rio_ch_chan_hdr *hdr; |
| struct rio_channel *ch; |
| |
| hdr = buf; |
| |
| riocm_debug(RX_DATA, "for ch=%d", ntohs(hdr->dst_ch)); |
| |
| ch = riocm_get_channel(ntohs(hdr->dst_ch)); |
| if (!ch) { |
| /* Discard data message for non-existing channel */ |
| kfree(buf); |
| return -ENODEV; |
| } |
| |
| /* Place pointer to the buffer into channel's RX queue */ |
| spin_lock(&ch->lock); |
| |
| if (ch->state != RIO_CM_CONNECTED) { |
| /* Channel is not ready to receive data, discard a packet */ |
| riocm_debug(RX_DATA, "ch=%d is in wrong state=%d", |
| ch->id, ch->state); |
| spin_unlock(&ch->lock); |
| kfree(buf); |
| riocm_put_channel(ch); |
| return -EIO; |
| } |
| |
| if (ch->rx_ring.count == RIOCM_RX_RING_SIZE) { |
| /* If RX ring is full, discard a packet */ |
| riocm_debug(RX_DATA, "ch=%d is full", ch->id); |
| spin_unlock(&ch->lock); |
| kfree(buf); |
| riocm_put_channel(ch); |
| return -ENOMEM; |
| } |
| |
| ch->rx_ring.buf[ch->rx_ring.head] = buf; |
| ch->rx_ring.head++; |
| ch->rx_ring.count++; |
| ch->rx_ring.head %= RIOCM_RX_RING_SIZE; |
| |
| complete(&ch->comp); |
| |
| spin_unlock(&ch->lock); |
| riocm_put_channel(ch); |
| |
| return 0; |
| } |
| |
| /* |
| * rio_ibmsg_handler - inbound message packet handler |
| */ |
| static void rio_ibmsg_handler(struct work_struct *work) |
| { |
| struct cm_dev *cm = container_of(work, struct cm_dev, rx_work); |
| void *data; |
| struct rio_ch_chan_hdr *hdr; |
| |
| if (!rio_mport_is_running(cm->mport)) |
| return; |
| |
| while (1) { |
| mutex_lock(&cm->rx_lock); |
| data = riocm_rx_get_msg(cm); |
| if (data) |
| riocm_rx_fill(cm, 1); |
| mutex_unlock(&cm->rx_lock); |
| |
| if (data == NULL) |
| break; |
| |
| hdr = data; |
| |
| if (hdr->bhdr.type != RIO_CM_CHAN) { |
| /* For now simply discard packets other than channel */ |
| riocm_error("Unsupported TYPE code (0x%x). Msg dropped", |
| hdr->bhdr.type); |
| kfree(data); |
| continue; |
| } |
| |
| /* Process a channel message */ |
| if (hdr->ch_op == CM_DATA_MSG) |
| rio_rx_data_handler(cm, data); |
| else |
| rio_cm_handler(cm, data); |
| } |
| } |
| |
| static void riocm_inb_msg_event(struct rio_mport *mport, void *dev_id, |
| int mbox, int slot) |
| { |
| struct cm_dev *cm = dev_id; |
| |
| if (rio_mport_is_running(cm->mport) && !work_pending(&cm->rx_work)) |
| queue_work(cm->rx_wq, &cm->rx_work); |
| } |
| |
| /* |
| * rio_txcq_handler - TX completion handler |
| * @cm: cm_dev object |
| * @slot: TX queue slot |
| * |
| * TX completion handler also ensures that pending request packets are placed |
| * into transmit queue as soon as a free slot becomes available. This is done |
| * to give higher priority to request packets during high intensity data flow. |
| */ |
| static void rio_txcq_handler(struct cm_dev *cm, int slot) |
| { |
| int ack_slot; |
| |
| /* ATTN: Add TX completion notification if/when direct buffer |
| * transfer is implemented. At this moment only correct tracking |
| * of tx_count is important. |
| */ |
| riocm_debug(TX_EVENT, "for mport_%d slot %d tx_cnt %d", |
| cm->mport->id, slot, cm->tx_cnt); |
| |
| spin_lock(&cm->tx_lock); |
| ack_slot = cm->tx_ack_slot; |
| |
| if (ack_slot == slot) |
| riocm_debug(TX_EVENT, "slot == ack_slot"); |
| |
| while (cm->tx_cnt && ((ack_slot != slot) || |
| (cm->tx_cnt == RIOCM_TX_RING_SIZE))) { |
| |
| cm->tx_buf[ack_slot] = NULL; |
| ++ack_slot; |
| ack_slot &= (RIOCM_TX_RING_SIZE - 1); |
| cm->tx_cnt--; |
| } |
| |
| if (cm->tx_cnt < 0 || cm->tx_cnt > RIOCM_TX_RING_SIZE) |
| riocm_error("tx_cnt %d out of sync", cm->tx_cnt); |
| |
| WARN_ON((cm->tx_cnt < 0) || (cm->tx_cnt > RIOCM_TX_RING_SIZE)); |
| |
| cm->tx_ack_slot = ack_slot; |
| |
| /* |
| * If there are pending requests, insert them into transmit queue |
| */ |
| if (!list_empty(&cm->tx_reqs) && (cm->tx_cnt < RIOCM_TX_RING_SIZE)) { |
| struct tx_req *req, *_req; |
| int rc; |
| |
| list_for_each_entry_safe(req, _req, &cm->tx_reqs, node) { |
| list_del(&req->node); |
| cm->tx_buf[cm->tx_slot] = req->buffer; |
| rc = rio_add_outb_message(cm->mport, req->rdev, cmbox, |
| req->buffer, req->len); |
| kfree(req->buffer); |
| kfree(req); |
| |
| ++cm->tx_cnt; |
| ++cm->tx_slot; |
| cm->tx_slot &= (RIOCM_TX_RING_SIZE - 1); |
| if (cm->tx_cnt == RIOCM_TX_RING_SIZE) |
| break; |
| } |
| } |
| |
| spin_unlock(&cm->tx_lock); |
| } |
| |
| static void riocm_outb_msg_event(struct rio_mport *mport, void *dev_id, |
| int mbox, int slot) |
| { |
| struct cm_dev *cm = dev_id; |
| |
| if (cm && rio_mport_is_running(cm->mport)) |
| rio_txcq_handler(cm, slot); |
| } |
| |
| static int riocm_queue_req(struct cm_dev *cm, struct rio_dev *rdev, |
| void *buffer, size_t len) |
| { |
| unsigned long flags; |
| struct tx_req *treq; |
| |
| treq = kzalloc(sizeof(*treq), GFP_KERNEL); |
| if (treq == NULL) |
| return -ENOMEM; |
| |
| treq->rdev = rdev; |
| treq->buffer = buffer; |
| treq->len = len; |
| |
| spin_lock_irqsave(&cm->tx_lock, flags); |
| list_add_tail(&treq->node, &cm->tx_reqs); |
| spin_unlock_irqrestore(&cm->tx_lock, flags); |
| return 0; |
| } |
| |
| /* |
| * riocm_post_send - helper function that places packet into msg TX queue |
| * @cm: cm_dev object |
| * @rdev: target RapidIO device object (required by outbound msg interface) |
| * @buffer: pointer to a packet buffer to send |
| * @len: length of data to transfer |
| * @req: request priority flag |
| * |
| * Returns: 0 if success, or error code otherwise. |
| */ |
| static int riocm_post_send(struct cm_dev *cm, struct rio_dev *rdev, |
| void *buffer, size_t len) |
| { |
| int rc; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cm->tx_lock, flags); |
| |
| if (cm->mport == NULL) { |
| rc = -ENODEV; |
| goto err_out; |
| } |
| |
| if (cm->tx_cnt == RIOCM_TX_RING_SIZE) { |
| riocm_debug(TX, "Tx Queue is full"); |
| rc = -EBUSY; |
| goto err_out; |
| } |
| |
| cm->tx_buf[cm->tx_slot] = buffer; |
| rc = rio_add_outb_message(cm->mport, rdev, cmbox, buffer, len); |
| |
| riocm_debug(TX, "Add buf@%p destid=%x tx_slot=%d tx_cnt=%d", |
| buffer, rdev->destid, cm->tx_slot, cm->tx_cnt); |
| |
| ++cm->tx_cnt; |
| ++cm->tx_slot; |
| cm->tx_slot &= (RIOCM_TX_RING_SIZE - 1); |
| |
| err_out: |
| spin_unlock_irqrestore(&cm->tx_lock, flags); |
| return rc; |
| } |
| |
| /* |
| * riocm_ch_send - sends a data packet to a remote device |
| * @ch_id: local channel ID |
| * @buf: pointer to a data buffer to send (including CM header) |
| * @len: length of data to transfer (including CM header) |
| * |
| * ATTN: ASSUMES THAT THE HEADER SPACE IS RESERVED PART OF THE DATA PACKET |
| * |
| * Returns: 0 if success, or |
| * -EINVAL if one or more input parameters is/are not valid, |
| * -ENODEV if cannot find a channel with specified ID, |
| * -EAGAIN if a channel is not in CONNECTED state, |
| * + error codes returned by HW send routine. |
| */ |
| static int riocm_ch_send(u16 ch_id, void *buf, int len) |
| { |
| struct rio_channel *ch; |
| struct rio_ch_chan_hdr *hdr; |
| int ret; |
| |
| if (buf == NULL || ch_id == 0 || len == 0 || len > RIO_MAX_MSG_SIZE) |
| return -EINVAL; |
| |
| ch = riocm_get_channel(ch_id); |
| if (!ch) { |
| riocm_error("%s(%d) ch_%d not found", current->comm, |
| task_pid_nr(current), ch_id); |
| return -ENODEV; |
| } |
| |
| if (!riocm_cmp(ch, RIO_CM_CONNECTED)) { |
| ret = -EAGAIN; |
| goto err_out; |
| } |
| |
| /* |
| * Fill buffer header section with corresponding channel data |
| */ |
| hdr = buf; |
| |
| hdr->bhdr.src_id = htonl(ch->loc_destid); |
| hdr->bhdr.dst_id = htonl(ch->rem_destid); |
| hdr->bhdr.src_mbox = cmbox; |
| hdr->bhdr.dst_mbox = cmbox; |
| hdr->bhdr.type = RIO_CM_CHAN; |
| hdr->ch_op = CM_DATA_MSG; |
| hdr->dst_ch = htons(ch->rem_channel); |
| hdr->src_ch = htons(ch->id); |
| hdr->msg_len = htons((u16)len); |
| |
| /* ATTN: the function call below relies on the fact that underlying |
| * HW-specific add_outb_message() routine copies TX data into its own |
| * internal transfer buffer (true for all RIONET compatible mport |
| * drivers). Must be reviewed if mport driver uses the buffer directly. |
| */ |
| |
| ret = riocm_post_send(ch->cmdev, ch->rdev, buf, len); |
| if (ret) |
| riocm_debug(TX, "ch %d send_err=%d", ch->id, ret); |
| err_out: |
| riocm_put_channel(ch); |
| return ret; |
| } |
| |
| static int riocm_ch_free_rxbuf(struct rio_channel *ch, void *buf) |
| { |
| int i, ret = -EINVAL; |
| |
| spin_lock_bh(&ch->lock); |
| |
| for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { |
| if (ch->rx_ring.inuse[i] == buf) { |
| ch->rx_ring.inuse[i] = NULL; |
| ch->rx_ring.inuse_cnt--; |
| ret = 0; |
| break; |
| } |
| } |
| |
| spin_unlock_bh(&ch->lock); |
| |
| if (!ret) |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| /* |
| * riocm_ch_receive - fetch a data packet received for the specified channel |
| * @ch: local channel ID |
| * @buf: pointer to a packet buffer |
| * @timeout: timeout to wait for incoming packet (in jiffies) |
| * |
| * Returns: 0 and valid buffer pointer if success, or NULL pointer and one of: |
| * -EAGAIN if a channel is not in CONNECTED state, |
| * -ENOMEM if in-use tracking queue is full, |
| * -ETIME if wait timeout expired, |
| * -EINTR if wait was interrupted. |
| */ |
| static int riocm_ch_receive(struct rio_channel *ch, void **buf, long timeout) |
| { |
| void *rxmsg = NULL; |
| int i, ret = 0; |
| long wret; |
| |
| if (!riocm_cmp(ch, RIO_CM_CONNECTED)) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| if (ch->rx_ring.inuse_cnt == RIOCM_RX_RING_SIZE) { |
| /* If we do not have entries to track buffers given to upper |
| * layer, reject request. |
| */ |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| wret = wait_for_completion_interruptible_timeout(&ch->comp, timeout); |
| |
| riocm_debug(WAIT, "wait on %d returned %ld", ch->id, wret); |
| |
| if (!wret) |
| ret = -ETIME; |
| else if (wret == -ERESTARTSYS) |
| ret = -EINTR; |
| else |
| ret = riocm_cmp(ch, RIO_CM_CONNECTED) ? 0 : -ECONNRESET; |
| |
| if (ret) |
| goto out; |
| |
| spin_lock_bh(&ch->lock); |
| |
| rxmsg = ch->rx_ring.buf[ch->rx_ring.tail]; |
| ch->rx_ring.buf[ch->rx_ring.tail] = NULL; |
| ch->rx_ring.count--; |
| ch->rx_ring.tail++; |
| ch->rx_ring.tail %= RIOCM_RX_RING_SIZE; |
| ret = -ENOMEM; |
| |
| for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { |
| if (ch->rx_ring.inuse[i] == NULL) { |
| ch->rx_ring.inuse[i] = rxmsg; |
| ch->rx_ring.inuse_cnt++; |
| ret = 0; |
| break; |
| } |
| } |
| |
| if (ret) { |
| /* We have no entry to store pending message: drop it */ |
| kfree(rxmsg); |
| rxmsg = NULL; |
| } |
| |
| spin_unlock_bh(&ch->lock); |
| out: |
| *buf = rxmsg; |
| return ret; |
| } |
| |
| /* |
| * riocm_ch_connect - sends a connect request to a remote device |
| * @loc_ch: local channel ID |
| * @cm: CM device to send connect request |
| * @peer: target RapidIO device |
| * @rem_ch: remote channel ID |
| * |
| * Returns: 0 if success, or |
| * -EINVAL if the channel is not in IDLE state, |
| * -EAGAIN if no connection request available immediately, |
| * -ETIME if ACK response timeout expired, |
| * -EINTR if wait for response was interrupted. |
| */ |
| static int riocm_ch_connect(u16 loc_ch, struct cm_dev *cm, |
| struct cm_peer *peer, u16 rem_ch) |
| { |
| struct rio_channel *ch = NULL; |
| struct rio_ch_chan_hdr *hdr; |
| int ret; |
| long wret; |
| |
| ch = riocm_get_channel(loc_ch); |
| if (!ch) |
| return -ENODEV; |
| |
| if (!riocm_cmp_exch(ch, RIO_CM_IDLE, RIO_CM_CONNECT)) { |
| ret = -EINVAL; |
| goto conn_done; |
| } |
| |
| ch->cmdev = cm; |
| ch->rdev = peer->rdev; |
| ch->context = NULL; |
| ch->loc_destid = cm->mport->host_deviceid; |
| ch->rem_channel = rem_ch; |
| |
| /* |
| * Send connect request to the remote RapidIO device |
| */ |
| |
| hdr = kzalloc(sizeof(*hdr), GFP_KERNEL); |
| if (hdr == NULL) { |
| ret = -ENOMEM; |
| goto conn_done; |
| } |
| |
| hdr->bhdr.src_id = htonl(ch->loc_destid); |
| hdr->bhdr.dst_id = htonl(peer->rdev->destid); |
| hdr->bhdr.src_mbox = cmbox; |
| hdr->bhdr.dst_mbox = cmbox; |
| hdr->bhdr.type = RIO_CM_CHAN; |
| hdr->ch_op = CM_CONN_REQ; |
| hdr->dst_ch = htons(rem_ch); |
| hdr->src_ch = htons(loc_ch); |
| |
| /* ATTN: the function call below relies on the fact that underlying |
| * HW-specific add_outb_message() routine copies TX data into its |
| * internal transfer buffer. Must be reviewed if mport driver uses |
| * this buffer directly. |
| */ |
| ret = riocm_post_send(cm, peer->rdev, hdr, sizeof(*hdr)); |
| |
| if (ret != -EBUSY) { |
| kfree(hdr); |
| } else { |
| ret = riocm_queue_req(cm, peer->rdev, hdr, sizeof(*hdr)); |
| if (ret) |
| kfree(hdr); |
| } |
| |
| if (ret) { |
| riocm_cmp_exch(ch, RIO_CM_CONNECT, RIO_CM_IDLE); |
| goto conn_done; |
| } |
| |
| /* Wait for connect response from the remote device */ |
| wret = wait_for_completion_interruptible_timeout(&ch->comp, |
| RIOCM_CONNECT_TO * HZ); |
| riocm_debug(WAIT, "wait on %d returns %ld", ch->id, wret); |
| |
| if (!wret) |
| ret = -ETIME; |
| else if (wret == -ERESTARTSYS) |
| ret = -EINTR; |
| else |
| ret = riocm_cmp(ch, RIO_CM_CONNECTED) ? 0 : -1; |
| |
| conn_done: |
| riocm_put_channel(ch); |
| return ret; |
| } |
| |
| static int riocm_send_ack(struct rio_channel *ch) |
| { |
| struct rio_ch_chan_hdr *hdr; |
| int ret; |
| |
| hdr = kzalloc(sizeof(*hdr), GFP_KERNEL); |
| if (hdr == NULL) |
| return -ENOMEM; |
| |
| hdr->bhdr.src_id = htonl(ch->loc_destid); |
| hdr->bhdr.dst_id = htonl(ch->rem_destid); |
| hdr->dst_ch = htons(ch->rem_channel); |
| hdr->src_ch = htons(ch->id); |
| hdr->bhdr.src_mbox = cmbox; |
| hdr->bhdr.dst_mbox = cmbox; |
| hdr->bhdr.type = RIO_CM_CHAN; |
| hdr->ch_op = CM_CONN_ACK; |
| |
| /* ATTN: the function call below relies on the fact that underlying |
| * add_outb_message() routine copies TX data into its internal transfer |
| * buffer. Review if switching to direct buffer version. |
| */ |
| ret = riocm_post_send(ch->cmdev, ch->rdev, hdr, sizeof(*hdr)); |
| |
| if (ret == -EBUSY && !riocm_queue_req(ch->cmdev, |
| ch->rdev, hdr, sizeof(*hdr))) |
| return 0; |
| kfree(hdr); |
| |
| if (ret) |
| riocm_error("send ACK to ch_%d on %s failed (ret=%d)", |
| ch->id, rio_name(ch->rdev), ret); |
| return ret; |
| } |
| |
| /* |
| * riocm_ch_accept - accept incoming connection request |
| * @ch_id: channel ID |
| * @new_ch_id: local mport device |
| * @timeout: wait timeout (if 0 non-blocking call, do not wait if connection |
| * request is not available). |
| * |
| * Returns: pointer to new channel struct if success, or error-valued pointer: |
| * -ENODEV - cannot find specified channel or mport, |
| * -EINVAL - the channel is not in IDLE state, |
| * -EAGAIN - no connection request available immediately (timeout=0), |
| * -ENOMEM - unable to allocate new channel, |
| * -ETIME - wait timeout expired, |
| * -EINTR - wait was interrupted. |
| */ |
| static struct rio_channel *riocm_ch_accept(u16 ch_id, u16 *new_ch_id, |
| long timeout) |
| { |
| struct rio_channel *ch; |
| struct rio_channel *new_ch; |
| struct conn_req *req; |
| struct cm_peer *peer; |
| int found = 0; |
| int err = 0; |
| long wret; |
| |
| ch = riocm_get_channel(ch_id); |
| if (!ch) |
| return ERR_PTR(-EINVAL); |
| |
| if (!riocm_cmp(ch, RIO_CM_LISTEN)) { |
| err = -EINVAL; |
| goto err_put; |
| } |
| |
| /* Don't sleep if this is a non blocking call */ |
| if (!timeout) { |
| if (!try_wait_for_completion(&ch->comp)) { |
| err = -EAGAIN; |
| goto err_put; |
| } |
| } else { |
| riocm_debug(WAIT, "on %d", ch->id); |
| |
| wret = wait_for_completion_interruptible_timeout(&ch->comp, |
| timeout); |
| if (!wret) { |
| err = -ETIME; |
| goto err_put; |
| } else if (wret == -ERESTARTSYS) { |
| err = -EINTR; |
| goto err_put; |
| } |
| } |
| |
| spin_lock_bh(&ch->lock); |
| |
| if (ch->state != RIO_CM_LISTEN) { |
| err = -ECANCELED; |
| } else if (list_empty(&ch->accept_queue)) { |
| riocm_debug(WAIT, "on %d accept_queue is empty on completion", |
| ch->id); |
| err = -EIO; |
| } |
| |
| spin_unlock_bh(&ch->lock); |
| |
| if (err) { |
| riocm_debug(WAIT, "on %d returns %d", ch->id, err); |
| goto err_put; |
| } |
| |
| /* Create new channel for this connection */ |
| new_ch = riocm_ch_alloc(RIOCM_CHNUM_AUTO); |
| |
| if (IS_ERR(new_ch)) { |
| riocm_error("failed to get channel for new req (%ld)", |
| PTR_ERR(new_ch)); |
| err = -ENOMEM; |
| goto err_put; |
| } |
| |
| spin_lock_bh(&ch->lock); |
| |
| req = list_first_entry(&ch->accept_queue, struct conn_req, node); |
| list_del(&req->node); |
| new_ch->cmdev = ch->cmdev; |
| new_ch->loc_destid = ch->loc_destid; |
| new_ch->rem_destid = req->destid; |
| new_ch->rem_channel = req->chan; |
| |
| spin_unlock_bh(&ch->lock); |
| riocm_put_channel(ch); |
| ch = NULL; |
| kfree(req); |
| |
| down_read(&rdev_sem); |
| /* Find requester's device object */ |
| list_for_each_entry(peer, &new_ch->cmdev->peers, node) { |
| if (peer->rdev->destid == new_ch->rem_destid) { |
| riocm_debug(RX_CMD, "found matching device(%s)", |
| rio_name(peer->rdev)); |
| found = 1; |
| break; |
| } |
| } |
| up_read(&rdev_sem); |
| |
| if (!found) { |
| /* If peer device object not found, simply ignore the request */ |
| err = -ENODEV; |
| goto err_put_new_ch; |
| } |
| |
| new_ch->rdev = peer->rdev; |
| new_ch->state = RIO_CM_CONNECTED; |
| spin_lock_init(&new_ch->lock); |
| |
| /* Acknowledge the connection request. */ |
| riocm_send_ack(new_ch); |
| |
| *new_ch_id = new_ch->id; |
| return new_ch; |
| |
| err_put_new_ch: |
| spin_lock_bh(&idr_lock); |
| idr_remove(&ch_idr, new_ch->id); |
| spin_unlock_bh(&idr_lock); |
| riocm_put_channel(new_ch); |
| |
| err_put: |
| if (ch) |
| riocm_put_channel(ch); |
| *new_ch_id = 0; |
| return ERR_PTR(err); |
| } |
| |
| /* |
| * riocm_ch_listen - puts a channel into LISTEN state |
| * @ch_id: channel ID |
| * |
| * Returns: 0 if success, or |
| * -EINVAL if the specified channel does not exists or |
| * is not in CHAN_BOUND state. |
| */ |
| static int riocm_ch_listen(u16 ch_id) |
| { |
| struct rio_channel *ch = NULL; |
| int ret = 0; |
| |
| riocm_debug(CHOP, "(ch_%d)", ch_id); |
| |
| ch = riocm_get_channel(ch_id); |
| if (!ch) |
| return -EINVAL; |
| if (!riocm_cmp_exch(ch, RIO_CM_CHAN_BOUND, RIO_CM_LISTEN)) |
| ret = -EINVAL; |
| riocm_put_channel(ch); |
| return ret; |
| } |
| |
| /* |
| * riocm_ch_bind - associate a channel object and an mport device |
| * @ch_id: channel ID |
| * @mport_id: local mport device ID |
| * @context: pointer to the additional caller's context |
| * |
| * Returns: 0 if success, or |
| * -ENODEV if cannot find specified mport, |
| * -EINVAL if the specified channel does not exist or |
| * is not in IDLE state. |
| */ |
| static int riocm_ch_bind(u16 ch_id, u8 mport_id, void *context) |
| { |
| struct rio_channel *ch = NULL; |
| struct cm_dev *cm; |
| int rc = -ENODEV; |
| |
| riocm_debug(CHOP, "ch_%d to mport_%d", ch_id, mport_id); |
| |
| /* Find matching cm_dev object */ |
| down_read(&rdev_sem); |
| list_for_each_entry(cm, &cm_dev_list, list) { |
| if ((cm->mport->id == mport_id) && |
| rio_mport_is_running(cm->mport)) { |
| rc = 0; |
| break; |
| } |
| } |
| |
| if (rc) |
| goto exit; |
| |
| ch = riocm_get_channel(ch_id); |
| if (!ch) { |
| rc = -EINVAL; |
| goto exit; |
| } |
| |
| spin_lock_bh(&ch->lock); |
| if (ch->state != RIO_CM_IDLE) { |
| spin_unlock_bh(&ch->lock); |
| rc = -EINVAL; |
| goto err_put; |
| } |
| |
| ch->cmdev = cm; |
| ch->loc_destid = cm->mport->host_deviceid; |
| ch->context = context; |
| ch->state = RIO_CM_CHAN_BOUND; |
| spin_unlock_bh(&ch->lock); |
| err_put: |
| riocm_put_channel(ch); |
| exit: |
| up_read(&rdev_sem); |
| return rc; |
| } |
| |
| /* |
| * riocm_ch_alloc - channel object allocation helper routine |
| * @ch_num: channel ID (1 ... RIOCM_MAX_CHNUM, 0 = automatic) |
| * |
| * Return value: pointer to newly created channel object, |
| * or error-valued pointer |
| */ |
| static struct rio_channel *riocm_ch_alloc(u16 ch_num) |
| { |
| int id; |
| int start, end; |
| struct rio_channel *ch; |
| |
| ch = kzalloc(sizeof(*ch), GFP_KERNEL); |
| if (!ch) |
| return ERR_PTR(-ENOMEM); |
| |
| if (ch_num) { |
| /* If requested, try to obtain the specified channel ID */ |
| start = ch_num; |
| end = ch_num + 1; |
| } else { |
| /* Obtain channel ID from the dynamic allocation range */ |
| start = chstart; |
| end = RIOCM_MAX_CHNUM + 1; |
| } |
| |
| idr_preload(GFP_KERNEL); |
| spin_lock_bh(&idr_lock); |
| id = idr_alloc_cyclic(&ch_idr, ch, start, end, GFP_NOWAIT); |
| spin_unlock_bh(&idr_lock); |
| idr_preload_end(); |
| |
| if (id < 0) { |
| kfree(ch); |
| return ERR_PTR(id == -ENOSPC ? -EBUSY : id); |
| } |
| |
| ch->id = (u16)id; |
| ch->state = RIO_CM_IDLE; |
| spin_lock_init(&ch->lock); |
| INIT_LIST_HEAD(&ch->accept_queue); |
| INIT_LIST_HEAD(&ch->ch_node); |
| init_completion(&ch->comp); |
| init_completion(&ch->comp_close); |
| kref_init(&ch->ref); |
| ch->rx_ring.head = 0; |
| ch->rx_ring.tail = 0; |
| ch->rx_ring.count = 0; |
| ch->rx_ring.inuse_cnt = 0; |
| |
| return ch; |
| } |
| |
| /* |
| * riocm_ch_create - creates a new channel object and allocates ID for it |
| * @ch_num: channel ID (1 ... RIOCM_MAX_CHNUM, 0 = automatic) |
| * |
| * Allocates and initializes a new channel object. If the parameter ch_num > 0 |
| * and is within the valid range, riocm_ch_create tries to allocate the |
| * specified ID for the new channel. If ch_num = 0, channel ID will be assigned |
| * automatically from the range (chstart ... RIOCM_MAX_CHNUM). |
| * Module parameter 'chstart' defines start of an ID range available for dynamic |
| * allocation. Range below 'chstart' is reserved for pre-defined ID numbers. |
| * Available channel numbers are limited by 16-bit size of channel numbers used |
| * in the packet header. |
| * |
| * Return value: PTR to rio_channel structure if successful (with channel number |
| * updated via pointer) or error-valued pointer if error. |
| */ |
| static struct rio_channel *riocm_ch_create(u16 *ch_num) |
| { |
| struct rio_channel *ch = NULL; |
| |
| ch = riocm_ch_alloc(*ch_num); |
| |
| if (IS_ERR(ch)) |
| riocm_debug(CHOP, "Failed to allocate channel %d (err=%ld)", |
| *ch_num, PTR_ERR(ch)); |
| else |
| *ch_num = ch->id; |
| |
| return ch; |
| } |
| |
| /* |
| * riocm_ch_free - channel object release routine |
| * @ref: pointer to a channel's kref structure |
| */ |
| static void riocm_ch_free(struct kref *ref) |
| { |
| struct rio_channel *ch = container_of(ref, struct rio_channel, ref); |
| int i; |
| |
| riocm_debug(CHOP, "(ch_%d)", ch->id); |
| |
| if (ch->rx_ring.inuse_cnt) { |
| for (i = 0; |
| i < RIOCM_RX_RING_SIZE && ch->rx_ring.inuse_cnt; i++) { |
| if (ch->rx_ring.inuse[i] != NULL) { |
| kfree(ch->rx_ring.inuse[i]); |
| ch->rx_ring.inuse_cnt--; |
| } |
| } |
| } |
| |
| if (ch->rx_ring.count) |
| for (i = 0; i < RIOCM_RX_RING_SIZE && ch->rx_ring.count; i++) { |
| if (ch->rx_ring.buf[i] != NULL) { |
| kfree(ch->rx_ring.buf[i]); |
| ch->rx_ring.count--; |
| } |
| } |
| |
| complete(&ch->comp_close); |
| } |
| |
| static int riocm_send_close(struct rio_channel *ch) |
| { |
| struct rio_ch_chan_hdr *hdr; |
| int ret; |
| |
| /* |
| * Send CH_CLOSE notification to the remote RapidIO device |
| */ |
| |
| hdr = kzalloc(sizeof(*hdr), GFP_KERNEL); |
| if (hdr == NULL) |
| return -ENOMEM; |
| |
| hdr->bhdr.src_id = htonl(ch->loc_destid); |
| hdr->bhdr.dst_id = htonl(ch->rem_destid); |
| hdr->bhdr.src_mbox = cmbox; |
| hdr->bhdr.dst_mbox = cmbox; |
| hdr->bhdr.type = RIO_CM_CHAN; |
| hdr->ch_op = CM_CONN_CLOSE; |
| hdr->dst_ch = htons(ch->rem_channel); |
| hdr->src_ch = htons(ch->id); |
| |
| /* ATTN: the function call below relies on the fact that underlying |
| * add_outb_message() routine copies TX data into its internal transfer |
| * buffer. Needs to be reviewed if switched to direct buffer mode. |
| */ |
| ret = riocm_post_send(ch->cmdev, ch->rdev, hdr, sizeof(*hdr)); |
| |
| if (ret == -EBUSY && !riocm_queue_req(ch->cmdev, ch->rdev, |
| hdr, sizeof(*hdr))) |
| return 0; |
| kfree(hdr); |
| |
| if (ret) |
| riocm_error("ch(%d) send CLOSE failed (ret=%d)", ch->id, ret); |
| |
| return ret; |
| } |
| |
| /* |
| * riocm_ch_close - closes a channel object with specified ID (by local request) |
| * @ch: channel to be closed |
| */ |
| static int riocm_ch_close(struct rio_channel *ch) |
| { |
| unsigned long tmo = msecs_to_jiffies(3000); |
| enum rio_cm_state state; |
| long wret; |
| int ret = 0; |
| |
| riocm_debug(CHOP, "ch_%d by %s(%d)", |
| ch->id, current->comm, task_pid_nr(current)); |
| |
| state = riocm_exch(ch, RIO_CM_DESTROYING); |
| if (state == RIO_CM_CONNECTED) |
| riocm_send_close(ch); |
| |
| complete_all(&ch->comp); |
| |
| riocm_put_channel(ch); |
| wret = wait_for_completion_interruptible_timeout(&ch->comp_close, tmo); |
| |
| riocm_debug(WAIT, "wait on %d returns %ld", ch->id, wret); |
| |
| if (wret == 0) { |
| /* Timeout on wait occurred */ |
| riocm_debug(CHOP, "%s(%d) timed out waiting for ch %d", |
| current->comm, task_pid_nr(current), ch->id); |
| ret = -ETIMEDOUT; |
| } else if (wret == -ERESTARTSYS) { |
| /* Wait_for_completion was interrupted by a signal */ |
| riocm_debug(CHOP, "%s(%d) wait for ch %d was interrupted", |
| current->comm, task_pid_nr(current), ch->id); |
| ret = -EINTR; |
| } |
| |
| if (!ret) { |
| riocm_debug(CHOP, "ch_%d resources released", ch->id); |
| kfree(ch); |
| } else { |
| riocm_debug(CHOP, "failed to release ch_%d resources", ch->id); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * riocm_cdev_open() - Open character device |
| */ |
| static int riocm_cdev_open(struct inode *inode, struct file *filp) |
| { |
| riocm_debug(INIT, "by %s(%d) filp=%p ", |
| current->comm, task_pid_nr(current), filp); |
| |
| if (list_empty(&cm_dev_list)) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| /* |
| * riocm_cdev_release() - Release character device |
| */ |
| static int riocm_cdev_release(struct inode *inode, struct file *filp) |
| { |
| struct rio_channel *ch, *_c; |
| unsigned int i; |
| LIST_HEAD(list); |
| |
| riocm_debug(EXIT, "by %s(%d) filp=%p", |
| current->comm, task_pid_nr(current), filp); |
| |
| /* Check if there are channels associated with this file descriptor */ |
| spin_lock_bh(&idr_lock); |
| idr_for_each_entry(&ch_idr, ch, i) { |
| if (ch && ch->filp == filp) { |
| riocm_debug(EXIT, "ch_%d not released by %s(%d)", |
| ch->id, current->comm, |
| task_pid_nr(current)); |
| idr_remove(&ch_idr, ch->id); |
| list_add(&ch->ch_node, &list); |
| } |
| } |
| spin_unlock_bh(&idr_lock); |
| |
| if (!list_empty(&list)) { |
| list_for_each_entry_safe(ch, _c, &list, ch_node) { |
| list_del(&ch->ch_node); |
| riocm_ch_close(ch); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * cm_ep_get_list_size() - Reports number of endpoints in the network |
| */ |
| static int cm_ep_get_list_size(void __user *arg) |
| { |
| u32 __user *p = arg; |
| u32 mport_id; |
| u32 count = 0; |
| struct cm_dev *cm; |
| |
| if (get_user(mport_id, p)) |
| return -EFAULT; |
| if (mport_id >= RIO_MAX_MPORTS) |
| return -EINVAL; |
| |
| /* Find a matching cm_dev object */ |
| down_read(&rdev_sem); |
| list_for_each_entry(cm, &cm_dev_list, list) { |
| if (cm->mport->id == mport_id) { |
| count = cm->npeers; |
| up_read(&rdev_sem); |
| if (copy_to_user(arg, &count, sizeof(u32))) |
| return -EFAULT; |
| return 0; |
| } |
| } |
| up_read(&rdev_sem); |
| |
| return -ENODEV; |
| } |
| |
| /* |
| * cm_ep_get_list() - Returns list of attached endpoints |
| */ |
| static int cm_ep_get_list(void __user *arg) |
| { |
| struct cm_dev *cm; |
| struct cm_peer *peer; |
| u32 info[2]; |
| void *buf; |
| u32 nent; |
| u32 *entry_ptr; |
| u32 i = 0; |
| int ret = 0; |
| |
| if (copy_from_user(&info, arg, sizeof(info))) |
| return -EFAULT; |
| |
| if (info[1] >= RIO_MAX_MPORTS || info[0] > RIOCM_MAX_EP_COUNT) |
| return -EINVAL; |
| |
| /* Find a matching cm_dev object */ |
| down_read(&rdev_sem); |
| list_for_each_entry(cm, &cm_dev_list, list) |
| if (cm->mport->id == (u8)info[1]) |
| goto found; |
| |
| up_read(&rdev_sem); |
| return -ENODEV; |
| |
| found: |
| nent = min(info[0], cm->npeers); |
| buf = kcalloc(nent + 2, sizeof(u32), GFP_KERNEL); |
| if (!buf) { |
| up_read(&rdev_sem); |
| return -ENOMEM; |
| } |
| |
| entry_ptr = (u32 *)((uintptr_t)buf + 2*sizeof(u32)); |
| |
| list_for_each_entry(peer, &cm->peers, node) { |
| *entry_ptr = (u32)peer->rdev->destid; |
| entry_ptr++; |
| if (++i == nent) |
| break; |
| } |
| up_read(&rdev_sem); |
| |
| ((u32 *)buf)[0] = i; /* report an updated number of entries */ |
| ((u32 *)buf)[1] = info[1]; /* put back an mport ID */ |
| if (copy_to_user(arg, buf, sizeof(u32) * (info[0] + 2))) |
| ret = -EFAULT; |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| /* |
| * cm_mport_get_list() - Returns list of available local mport devices |
| */ |
| static int cm_mport_get_list(void __user *arg) |
| { |
| int ret = 0; |
| u32 entries; |
| void *buf; |
| struct cm_dev *cm; |
| u32 *entry_ptr; |
| int count = 0; |
| |
| if (copy_from_user(&entries, arg, sizeof(entries))) |
| return -EFAULT; |
| if (entries == 0 || entries > RIO_MAX_MPORTS) |
| return -EINVAL; |
| buf = kcalloc(entries + 1, sizeof(u32), GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| /* Scan all registered cm_dev objects */ |
| entry_ptr = (u32 *)((uintptr_t)buf + sizeof(u32)); |
| down_read(&rdev_sem); |
| list_for_each_entry(cm, &cm_dev_list, list) { |
| if (count++ < entries) { |
| *entry_ptr = (cm->mport->id << 16) | |
| cm->mport->host_deviceid; |
| entry_ptr++; |
| } |
| } |
| up_read(&rdev_sem); |
| |
| *((u32 *)buf) = count; /* report a real number of entries */ |
| if (copy_to_user(arg, buf, sizeof(u32) * (count + 1))) |
| ret = -EFAULT; |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| /* |
| * cm_chan_create() - Create a message exchange channel |
| */ |
| static int cm_chan_create(struct file *filp, void __user *arg) |
| { |
| u16 __user *p = arg; |
| u16 ch_num; |
| struct rio_channel *ch; |
| |
| if (get_user(ch_num, p)) |
| return -EFAULT; |
| |
| riocm_debug(CHOP, "ch_%d requested by %s(%d)", |
| ch_num, current->comm, task_pid_nr(current)); |
| ch = riocm_ch_create(&ch_num); |
| if (IS_ERR(ch)) |
| return PTR_ERR(ch); |
| |
| ch->filp = filp; |
| riocm_debug(CHOP, "ch_%d created by %s(%d)", |
| ch_num, current->comm, task_pid_nr(current)); |
| return put_user(ch_num, p); |
| } |
| |
| /* |
| * cm_chan_close() - Close channel |
| * @filp: Pointer to file object |
| * @arg: Channel to close |
| */ |
| static int cm_chan_close(struct file *filp, void __user *arg) |
| { |
| u16 __user *p = arg; |
| u16 ch_num; |
| struct rio_channel *ch; |
| |
| if (get_user(ch_num, p)) |
| return -EFAULT; |
| |
| riocm_debug(CHOP, "ch_%d by %s(%d)", |
| ch_num, current->comm, task_pid_nr(current)); |
| |
| spin_lock_bh(&idr_lock); |
| ch = idr_find(&ch_idr, ch_num); |
| if (!ch) { |
| spin_unlock_bh(&idr_lock); |
| return 0; |
| } |
| if (ch->filp != filp) { |
| spin_unlock_bh(&idr_lock); |
| return -EINVAL; |
| } |
| idr_remove(&ch_idr, ch->id); |
| spin_unlock_bh(&idr_lock); |
| |
| return riocm_ch_close(ch); |
| } |
| |
| /* |
| * cm_chan_bind() - Bind channel |
| * @arg: Channel number |
| */ |
| static int cm_chan_bind(void __user *arg) |
| { |
| struct rio_cm_channel chan; |
| |
| if (copy_from_user(&chan, arg, sizeof(chan))) |
| return -EFAULT; |
| if (chan.mport_id >= RIO_MAX_MPORTS) |
| return -EINVAL; |
| |
| return riocm_ch_bind(chan.id, chan.mport_id, NULL); |
| } |
| |
| /* |
| * cm_chan_listen() - Listen on channel |
| * @arg: Channel number |
| */ |
| static int cm_chan_listen(void __user *arg) |
| { |
| u16 __user *p = arg; |
| u16 ch_num; |
| |
| if (get_user(ch_num, p)) |
| return -EFAULT; |
| |
| return riocm_ch_listen(ch_num); |
| } |
| |
| /* |
| * cm_chan_accept() - Accept incoming connection |
| * @filp: Pointer to file object |
| * @arg: Channel number |
| */ |
| static int cm_chan_accept(struct file *filp, void __user *arg) |
| { |
| struct rio_cm_accept param; |
| long accept_to; |
| struct rio_channel *ch; |
| |
| if (copy_from_user(¶m, arg, sizeof(param))) |
| return -EFAULT; |
| |
| riocm_debug(CHOP, "on ch_%d by %s(%d)", |
| param.ch_num, current->comm, task_pid_nr(current)); |
| |
| accept_to = param.wait_to ? |
| msecs_to_jiffies(param.wait_to) : 0; |
| |
| ch = riocm_ch_accept(param.ch_num, ¶m.ch_num, accept_to); |
| if (IS_ERR(ch)) |
| return PTR_ERR(ch); |
| ch->filp = filp; |
| |
| riocm_debug(CHOP, "new ch_%d for %s(%d)", |
| ch->id, current->comm, task_pid_nr(current)); |
| |
| if (copy_to_user(arg, ¶m, sizeof(param))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| /* |
| * cm_chan_connect() - Connect on channel |
| * @arg: Channel information |
| */ |
| static int cm_chan_connect(void __user *arg) |
| { |
| struct rio_cm_channel chan; |
| struct cm_dev *cm; |
| struct cm_peer *peer; |
| int ret = -ENODEV; |
| |
| if (copy_from_user(&chan, arg, sizeof(chan))) |
| return -EFAULT; |
| if (chan.mport_id >= RIO_MAX_MPORTS) |
| return -EINVAL; |
| |
| down_read(&rdev_sem); |
| |
| /* Find matching cm_dev object */ |
| list_for_each_entry(cm, &cm_dev_list, list) { |
| if (cm->mport->id == chan.mport_id) { |
| ret = 0; |
| break; |
| } |
| } |
| |
| if (ret) |
| goto err_out; |
| |
| if (chan.remote_destid >= RIO_ANY_DESTID(cm->mport->sys_size)) { |
| ret = -EINVAL; |
| goto err_out; |
| } |
| |
| /* Find corresponding RapidIO endpoint device object */ |
| ret = -ENODEV; |
| |
| list_for_each_entry(peer, &cm->peers, node) { |
| if (peer->rdev->destid == chan.remote_destid) { |
| ret = 0; |
| break; |
| } |
| } |
| |
| if (ret) |
| goto err_out; |
| |
| up_read(&rdev_sem); |
| |
| return riocm_ch_connect(chan.id, cm, peer, chan.remote_channel); |
| err_out: |
| up_read(&rdev_sem); |
| return ret; |
| } |
| |
| /* |
| * cm_chan_msg_send() - Send a message through channel |
| * @arg: Outbound message information |
| */ |
| static int cm_chan_msg_send(void __user *arg) |
| { |
| struct rio_cm_msg msg; |
| void *buf; |
| int ret; |
| |
| if (copy_from_user(&msg, arg, sizeof(msg))) |
| return -EFAULT; |
| if (msg.size > RIO_MAX_MSG_SIZE) |
| return -EINVAL; |
| |
| buf = memdup_user((void __user *)(uintptr_t)msg.msg, msg.size); |
| if (IS_ERR(buf)) |
| return PTR_ERR(buf); |
| |
| ret = riocm_ch_send(msg.ch_num, buf, msg.size); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| /* |
| * cm_chan_msg_rcv() - Receive a message through channel |
| * @arg: Inbound message information |
| */ |
| static int cm_chan_msg_rcv(void __user *arg) |
| { |
| struct rio_cm_msg msg; |
| struct rio_channel *ch; |
| void *buf; |
| long rxto; |
| int ret = 0, msg_size; |
| |
| if (copy_from_user(&msg, arg, sizeof(msg))) |
| return -EFAULT; |
| |
| if (msg.ch_num == 0 || msg.size == 0) |
| return -EINVAL; |
| |
| ch = riocm_get_channel(msg.ch_num); |
| if (!ch) |
| return -ENODEV; |
| |
| rxto = msg.rxto ? msecs_to_jiffies(msg.rxto) : MAX_SCHEDULE_TIMEOUT; |
| |
| ret = riocm_ch_receive(ch, &buf, rxto); |
| if (ret) |
| goto out; |
| |
| msg_size = min(msg.size, (u16)(RIO_MAX_MSG_SIZE)); |
| |
| if (copy_to_user((void __user *)(uintptr_t)msg.msg, buf, msg_size)) |
| ret = -EFAULT; |
| |
| riocm_ch_free_rxbuf(ch, buf); |
| out: |
| riocm_put_channel(ch); |
| return ret; |
| } |
| |
| /* |
| * riocm_cdev_ioctl() - IOCTL requests handler |
| */ |
| static long |
| riocm_cdev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) |
| { |
| switch (cmd) { |
| case RIO_CM_EP_GET_LIST_SIZE: |
| return cm_ep_get_list_size((void __user *)arg); |
| case RIO_CM_EP_GET_LIST: |
| return cm_ep_get_list((void __user *)arg); |
| case RIO_CM_CHAN_CREATE: |
| return cm_chan_create(filp, (void __user *)arg); |
| case RIO_CM_CHAN_CLOSE: |
| return cm_chan_close(filp, (void __user *)arg); |
| case RIO_CM_CHAN_BIND: |
| return cm_chan_bind((void __user *)arg); |
| case RIO_CM_CHAN_LISTEN: |
| return cm_chan_listen((void __user *)arg); |
| case RIO_CM_CHAN_ACCEPT: |
| return cm_chan_accept(filp, (void __user *)arg); |
| case RIO_CM_CHAN_CONNECT: |
| return cm_chan_connect((void __user *)arg); |
| case RIO_CM_CHAN_SEND: |
| return cm_chan_msg_send((void __user *)arg); |
| case RIO_CM_CHAN_RECEIVE: |
| return cm_chan_msg_rcv((void __user *)arg); |
| case RIO_CM_MPORT_GET_LIST: |
| return cm_mport_get_list((void __user *)arg); |
| default: |
| break; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const struct file_operations riocm_cdev_fops = { |
| .owner = THIS_MODULE, |
| .open = riocm_cdev_open, |
| .release = riocm_cdev_release, |
| .unlocked_ioctl = riocm_cdev_ioctl, |
| }; |
| |
| /* |
| * riocm_add_dev - add new remote RapidIO device into channel management core |
| * @dev: device object associated with RapidIO device |
| * @sif: subsystem interface |
| * |
| * Adds the specified RapidIO device (if applicable) into peers list of |
| * the corresponding channel management device (cm_dev). |
| */ |
| static int riocm_add_dev(struct device *dev, struct subsys_interface *sif) |
| { |
| struct cm_peer *peer; |
| struct rio_dev *rdev = to_rio_dev(dev); |
| struct cm_dev *cm; |
| |
| /* Check if the remote device has capabilities required to support CM */ |
| if (!dev_cm_capable(rdev)) |
| return 0; |
| |
| riocm_debug(RDEV, "(%s)", rio_name(rdev)); |
| |
| peer = kmalloc(sizeof(*peer), GFP_KERNEL); |
| if (!peer) |
| return -ENOMEM; |
| |
| /* Find a corresponding cm_dev object */ |
| down_write(&rdev_sem); |
| list_for_each_entry(cm, &cm_dev_list, list) { |
| if (cm->mport == rdev->net->hport) |
| goto found; |
| } |
| |
| up_write(&rdev_sem); |
| kfree(peer); |
| return -ENODEV; |
| |
| found: |
| peer->rdev = rdev; |
| list_add_tail(&peer->node, &cm->peers); |
| cm->npeers++; |
| |
| up_write(&rdev_sem); |
| return 0; |
| } |
| |
| /* |
| * riocm_remove_dev - remove remote RapidIO device from channel management core |
| * @dev: device object associated with RapidIO device |
| * @sif: subsystem interface |
| * |
| * Removes the specified RapidIO device (if applicable) from peers list of |
| * the corresponding channel management device (cm_dev). |
| */ |
| static void riocm_remove_dev(struct device *dev, struct subsys_interface *sif) |
| { |
| struct rio_dev *rdev = to_rio_dev(dev); |
| struct cm_dev *cm; |
| struct cm_peer *peer; |
| struct rio_channel *ch, *_c; |
| unsigned int i; |
| bool found = false; |
| LIST_HEAD(list); |
| |
| /* Check if the remote device has capabilities required to support CM */ |
| if (!dev_cm_capable(rdev)) |
| return; |
| |
| riocm_debug(RDEV, "(%s)", rio_name(rdev)); |
| |
| /* Find matching cm_dev object */ |
| down_write(&rdev_sem); |
| list_for_each_entry(cm, &cm_dev_list, list) { |
| if (cm->mport == rdev->net->hport) { |
| found = true; |
| break; |
| } |
| } |
| |
| if (!found) { |
| up_write(&rdev_sem); |
| return; |
| } |
| |
| /* Remove remote device from the list of peers */ |
| found = false; |
| list_for_each_entry(peer, &cm->peers, node) { |
| if (peer->rdev == rdev) { |
| riocm_debug(RDEV, "removing peer %s", rio_name(rdev)); |
| found = true; |
| list_del(&peer->node); |
| cm->npeers--; |
| kfree(peer); |
| break; |
| } |
| } |
| |
| up_write(&rdev_sem); |
| |
| if (!found) |
| return; |
| |
| /* |
| * Release channels associated with this peer |
| */ |
| |
| spin_lock_bh(&idr_lock); |
| idr_for_each_entry(&ch_idr, ch, i) { |
| if (ch && ch->rdev == rdev) { |
| if (atomic_read(&rdev->state) != RIO_DEVICE_SHUTDOWN) |
| riocm_exch(ch, RIO_CM_DISCONNECT); |
| idr_remove(&ch_idr, ch->id); |
| list_add(&ch->ch_node, &list); |
| } |
| } |
| spin_unlock_bh(&idr_lock); |
| |
| if (!list_empty(&list)) { |
| list_for_each_entry_safe(ch, _c, &list, ch_node) { |
| list_del(&ch->ch_node); |
| riocm_ch_close(ch); |
| } |
| } |
| } |
| |
| /* |
| * riocm_cdev_add() - Create rio_cm char device |
| * @devno: device number assigned to device (MAJ + MIN) |
| */ |
| static int riocm_cdev_add(dev_t devno) |
| { |
| int ret; |
| |
| cdev_init(&riocm_cdev.cdev, &riocm_cdev_fops); |
| riocm_cdev.cdev.owner = THIS_MODULE; |
| ret = cdev_add(&riocm_cdev.cdev, devno, 1); |
| if (ret < 0) { |
| riocm_error("Cannot register a device with error %d", ret); |
| return ret; |
| } |
| |
| riocm_cdev.dev = device_create(dev_class, NULL, devno, NULL, DEV_NAME); |
| if (IS_ERR(riocm_cdev.dev)) { |
| cdev_del(&riocm_cdev.cdev); |
| return PTR_ERR(riocm_cdev.dev); |
| } |
| |
| riocm_debug(MPORT, "Added %s cdev(%d:%d)", |
| DEV_NAME, MAJOR(devno), MINOR(devno)); |
| |
| return 0; |
| } |
| |
| /* |
| * riocm_add_mport - add new local mport device into channel management core |
| * @dev: device object associated with mport |
| * @class_intf: class interface |
| * |
| * When a new mport device is added, CM immediately reserves inbound and |
| * outbound RapidIO mailboxes that will be used. |
| */ |
| static int riocm_add_mport(struct device *dev, |
| struct class_interface *class_intf) |
| { |
| int rc; |
| int i; |
| struct cm_dev *cm; |
| struct rio_mport *mport = to_rio_mport(dev); |
| |
| riocm_debug(MPORT, "add mport %s", mport->name); |
| |
| cm = kzalloc(sizeof(*cm), GFP_KERNEL); |
| if (!cm) |
| return -ENOMEM; |
| |
| cm->mport = mport; |
| |
| rc = rio_request_outb_mbox(mport, cm, cmbox, |
| RIOCM_TX_RING_SIZE, riocm_outb_msg_event); |
| if (rc) { |
| riocm_error("failed to allocate OBMBOX_%d on %s", |
| cmbox, mport->name); |
| kfree(cm); |
| return -ENODEV; |
| } |
| |
| rc = rio_request_inb_mbox(mport, cm, cmbox, |
| RIOCM_RX_RING_SIZE, riocm_inb_msg_event); |
| if (rc) { |
| riocm_error("failed to allocate IBMBOX_%d on %s", |
| cmbox, mport->name); |
| rio_release_outb_mbox(mport, cmbox); |
| kfree(cm); |
| return -ENODEV; |
| } |
| |
| /* |
| * Allocate and register inbound messaging buffers to be ready |
| * to receive channel and system management requests |
| */ |
| for (i = 0; i < RIOCM_RX_RING_SIZE; i++) |
| cm->rx_buf[i] = NULL; |
| |
| cm->rx_slots = RIOCM_RX_RING_SIZE; |
| mutex_init(&cm->rx_lock); |
| riocm_rx_fill(cm, RIOCM_RX_RING_SIZE); |
| cm->rx_wq = create_workqueue(DRV_NAME "/rxq"); |
| if (!cm->rx_wq) { |
| riocm_error("failed to allocate IBMBOX_%d on %s", |
| cmbox, mport->name); |
| rio_release_outb_mbox(mport, cmbox); |
| kfree(cm); |
| return -ENOMEM; |
| } |
| |
| INIT_WORK(&cm->rx_work, rio_ibmsg_handler); |
| |
| cm->tx_slot = 0; |
| cm->tx_cnt = 0; |
| cm->tx_ack_slot = 0; |
| spin_lock_init(&cm->tx_lock); |
| |
| INIT_LIST_HEAD(&cm->peers); |
| cm->npeers = 0; |
| INIT_LIST_HEAD(&cm->tx_reqs); |
| |
| down_write(&rdev_sem); |
| list_add_tail(&cm->list, &cm_dev_list); |
| up_write(&rdev_sem); |
| |
| return 0; |
| } |
| |
| /* |
| * riocm_remove_mport - remove local mport device from channel management core |
| * @dev: device object associated with mport |
| * @class_intf: class interface |
| * |
| * Removes a local mport device from the list of registered devices that provide |
| * channel management services. Returns an error if the specified mport is not |
| * registered with the CM core. |
| */ |
| static void riocm_remove_mport(struct device *dev, |
| struct class_interface *class_intf) |
| { |
| struct rio_mport *mport = to_rio_mport(dev); |
| struct cm_dev *cm; |
| struct cm_peer *peer, *temp; |
| struct rio_channel *ch, *_c; |
| unsigned int i; |
| bool found = false; |
| LIST_HEAD(list); |
| |
| riocm_debug(MPORT, "%s", mport->name); |
| |
| /* Find a matching cm_dev object */ |
| down_write(&rdev_sem); |
| list_for_each_entry(cm, &cm_dev_list, list) { |
| if (cm->mport == mport) { |
| list_del(&cm->list); |
| found = true; |
| break; |
| } |
| } |
| up_write(&rdev_sem); |
| if (!found) |
| return; |
| |
| flush_workqueue(cm->rx_wq); |
| destroy_workqueue(cm->rx_wq); |
| |
| /* Release channels bound to this mport */ |
| spin_lock_bh(&idr_lock); |
| idr_for_each_entry(&ch_idr, ch, i) { |
| if (ch->cmdev == cm) { |
| riocm_debug(RDEV, "%s drop ch_%d", |
| mport->name, ch->id); |
| idr_remove(&ch_idr, ch->id); |
| list_add(&ch->ch_node, &list); |
| } |
| } |
| spin_unlock_bh(&idr_lock); |
| |
| if (!list_empty(&list)) { |
| list_for_each_entry_safe(ch, _c, &list, ch_node) { |
| list_del(&ch->ch_node); |
| riocm_ch_close(ch); |
| } |
| } |
| |
| rio_release_inb_mbox(mport, cmbox); |
| rio_release_outb_mbox(mport, cmbox); |
| |
| /* Remove and free peer entries */ |
| if (!list_empty(&cm->peers)) |
| riocm_debug(RDEV, "ATTN: peer list not empty"); |
| list_for_each_entry_safe(peer, temp, &cm->peers, node) { |
| riocm_debug(RDEV, "removing peer %s", rio_name(peer->rdev)); |
| list_del(&peer->node); |
| kfree(peer); |
| } |
| |
| riocm_rx_free(cm); |
| kfree(cm); |
| riocm_debug(MPORT, "%s done", mport->name); |
| } |
| |
| static int rio_cm_shutdown(struct notifier_block *nb, unsigned long code, |
| void *unused) |
| { |
| struct rio_channel *ch; |
| unsigned int i; |
| LIST_HEAD(list); |
| |
| riocm_debug(EXIT, "."); |
| |
| /* |
| * If there are any channels left in connected state send |
| * close notification to the connection partner. |
| * First build a list of channels that require a closing |
| * notification because function riocm_send_close() should |
| * be called outside of spinlock protected code. |
| */ |
| spin_lock_bh(&idr_lock); |
| idr_for_each_entry(&ch_idr, ch, i) { |
| if (ch->state == RIO_CM_CONNECTED) { |
| riocm_debug(EXIT, "close ch %d", ch->id); |
| idr_remove(&ch_idr, ch->id); |
| list_add(&ch->ch_node, &list); |
| } |
| } |
| spin_unlock_bh(&idr_lock); |
| |
| list_for_each_entry(ch, &list, ch_node) |
| riocm_send_close(ch); |
| |
| return NOTIFY_DONE; |
| } |
| |
| /* |
| * riocm_interface handles addition/removal of remote RapidIO devices |
| */ |
| static struct subsys_interface riocm_interface = { |
| .name = "rio_cm", |
| .subsys = &rio_bus_type, |
| .add_dev = riocm_add_dev, |
| .remove_dev = riocm_remove_dev, |
| }; |
| |
| /* |
| * rio_mport_interface handles addition/removal local mport devices |
| */ |
| static struct class_interface rio_mport_interface __refdata = { |
| .class = &rio_mport_class, |
| .add_dev = riocm_add_mport, |
| .remove_dev = riocm_remove_mport, |
| }; |
| |
| static struct notifier_block rio_cm_notifier = { |
| .notifier_call = rio_cm_shutdown, |
| }; |
| |
| static int __init riocm_init(void) |
| { |
| int ret; |
| |
| /* Create device class needed by udev */ |
| dev_class = class_create(THIS_MODULE, DRV_NAME); |
| if (IS_ERR(dev_class)) { |
| riocm_error("Cannot create " DRV_NAME " class"); |
| return PTR_ERR(dev_class); |
| } |
| |
| ret = alloc_chrdev_region(&dev_number, 0, 1, DRV_NAME); |
| if (ret) { |
| class_destroy(dev_class); |
| return ret; |
| } |
| |
| dev_major = MAJOR(dev_number); |
| dev_minor_base = MINOR(dev_number); |
| riocm_debug(INIT, "Registered class with %d major", dev_major); |
| |
| /* |
| * Register as rapidio_port class interface to get notifications about |
| * mport additions and removals. |
| */ |
| ret = class_interface_register(&rio_mport_interface); |
| if (ret) { |
| riocm_error("class_interface_register error: %d", ret); |
| goto err_reg; |
| } |
| |
| /* |
| * Register as RapidIO bus interface to get notifications about |
| * addition/removal of remote RapidIO devices. |
| */ |
| ret = subsys_interface_register(&riocm_interface); |
| if (ret) { |
| riocm_error("subsys_interface_register error: %d", ret); |
| goto err_cl; |
| } |
| |
| ret = register_reboot_notifier(&rio_cm_notifier); |
| if (ret) { |
| riocm_error("failed to register reboot notifier (err=%d)", ret); |
| goto err_sif; |
| } |
| |
| ret = riocm_cdev_add(dev_number); |
| if (ret) { |
| unregister_reboot_notifier(&rio_cm_notifier); |
| ret = -ENODEV; |
| goto err_sif; |
| } |
| |
| return 0; |
| err_sif: |
| subsys_interface_unregister(&riocm_interface); |
| err_cl: |
| class_interface_unregister(&rio_mport_interface); |
| err_reg: |
| unregister_chrdev_region(dev_number, 1); |
| class_destroy(dev_class); |
| return ret; |
| } |
| |
| static void __exit riocm_exit(void) |
| { |
| riocm_debug(EXIT, "enter"); |
| unregister_reboot_notifier(&rio_cm_notifier); |
| subsys_interface_unregister(&riocm_interface); |
| class_interface_unregister(&rio_mport_interface); |
| idr_destroy(&ch_idr); |
| |
| device_unregister(riocm_cdev.dev); |
| cdev_del(&(riocm_cdev.cdev)); |
| |
| class_destroy(dev_class); |
| unregister_chrdev_region(dev_number, 1); |
| } |
| |
| late_initcall(riocm_init); |
| module_exit(riocm_exit); |