| /* |
| * cbe_regs.h |
| * |
| * This file is intended to hold the various register definitions for CBE |
| * on-chip system devices (memory controller, IO controller, etc...) |
| * |
| * (C) Copyright IBM Corporation 2001,2006 |
| * |
| * Authors: Maximino Aguilar (maguilar@us.ibm.com) |
| * David J. Erb (djerb@us.ibm.com) |
| * |
| * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp. |
| */ |
| |
| #ifndef CBE_REGS_H |
| #define CBE_REGS_H |
| |
| #include <asm/cell-pmu.h> |
| |
| /* |
| * |
| * Some HID register definitions |
| * |
| */ |
| |
| /* CBE specific HID0 bits */ |
| #define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul |
| #define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul |
| #define HID0_CBE_THERM_INT_EN 0x0000000400000000ul |
| #define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul |
| |
| #define MAX_CBE 2 |
| |
| /* |
| * |
| * Pervasive unit register definitions |
| * |
| */ |
| |
| union spe_reg { |
| u64 val; |
| u8 spe[8]; |
| }; |
| |
| union ppe_spe_reg { |
| u64 val; |
| struct { |
| u32 ppe; |
| u32 spe; |
| }; |
| }; |
| |
| |
| struct cbe_pmd_regs { |
| /* Debug Bus Control */ |
| u64 pad_0x0000; /* 0x0000 */ |
| |
| u64 group_control; /* 0x0008 */ |
| |
| u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ |
| |
| u64 debug_bus_control; /* 0x00a8 */ |
| |
| u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ |
| |
| u64 trace_aux_data; /* 0x0100 */ |
| u64 trace_buffer_0_63; /* 0x0108 */ |
| u64 trace_buffer_64_127; /* 0x0110 */ |
| u64 trace_address; /* 0x0118 */ |
| u64 ext_tr_timer; /* 0x0120 */ |
| |
| u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */ |
| |
| /* Performance Monitor */ |
| u64 pm_status; /* 0x0400 */ |
| u64 pm_control; /* 0x0408 */ |
| u64 pm_interval; /* 0x0410 */ |
| u64 pm_ctr[4]; /* 0x0418 */ |
| u64 pm_start_stop; /* 0x0438 */ |
| u64 pm07_control[8]; /* 0x0440 */ |
| |
| u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */ |
| |
| /* Thermal Sensor Registers */ |
| union spe_reg ts_ctsr1; /* 0x0800 */ |
| u64 ts_ctsr2; /* 0x0808 */ |
| union spe_reg ts_mtsr1; /* 0x0810 */ |
| u64 ts_mtsr2; /* 0x0818 */ |
| union spe_reg ts_itr1; /* 0x0820 */ |
| u64 ts_itr2; /* 0x0828 */ |
| u64 ts_gitr; /* 0x0830 */ |
| u64 ts_isr; /* 0x0838 */ |
| u64 ts_imr; /* 0x0840 */ |
| union spe_reg tm_cr1; /* 0x0848 */ |
| u64 tm_cr2; /* 0x0850 */ |
| u64 tm_simr; /* 0x0858 */ |
| union ppe_spe_reg tm_tpr; /* 0x0860 */ |
| union spe_reg tm_str1; /* 0x0868 */ |
| u64 tm_str2; /* 0x0870 */ |
| union ppe_spe_reg tm_tsr; /* 0x0878 */ |
| |
| /* Power Management */ |
| u64 pmcr; /* 0x0880 */ |
| #define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 |
| u64 pmsr; /* 0x0888 */ |
| |
| /* Time Base Register */ |
| u64 tbr; /* 0x0890 */ |
| |
| u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ |
| |
| /* Fault Isolation Registers */ |
| u64 checkstop_fir; /* 0x0c00 */ |
| u64 recoverable_fir; /* 0x0c08 */ |
| u64 spec_att_mchk_fir; /* 0x0c10 */ |
| u64 fir_mode_reg; /* 0x0c18 */ |
| u64 fir_enable_mask; /* 0x0c20 */ |
| |
| u8 pad_0x0c28_0x1000 [0x1000 - 0x0c28]; /* 0x0c28 */ |
| }; |
| |
| extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); |
| extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); |
| |
| /* |
| * PMU shadow registers |
| * |
| * Many of the registers in the performance monitoring unit are write-only, |
| * so we need to save a copy of what we write to those registers. |
| * |
| * The actual data counters are read/write. However, writing to the counters |
| * only takes effect if the PMU is enabled. Otherwise the value is stored in |
| * a hardware latch until the next time the PMU is enabled. So we save a copy |
| * of the counter values if we need to read them back while the PMU is |
| * disabled. The counter_value_in_latch field is a bitmap indicating which |
| * counters currently have a value waiting to be written. |
| */ |
| |
| struct cbe_pmd_shadow_regs { |
| u32 group_control; |
| u32 debug_bus_control; |
| u32 trace_address; |
| u32 ext_tr_timer; |
| u32 pm_status; |
| u32 pm_control; |
| u32 pm_interval; |
| u32 pm_start_stop; |
| u32 pm07_control[NR_CTRS]; |
| |
| u32 pm_ctr[NR_PHYS_CTRS]; |
| u32 counter_value_in_latch; |
| }; |
| |
| extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np); |
| extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu); |
| |
| /* |
| * |
| * IIC unit register definitions |
| * |
| */ |
| |
| struct cbe_iic_pending_bits { |
| u32 data; |
| u8 flags; |
| u8 class; |
| u8 source; |
| u8 prio; |
| }; |
| |
| #define CBE_IIC_IRQ_VALID 0x80 |
| #define CBE_IIC_IRQ_IPI 0x40 |
| |
| struct cbe_iic_thread_regs { |
| struct cbe_iic_pending_bits pending; |
| struct cbe_iic_pending_bits pending_destr; |
| u64 generate; |
| u64 prio; |
| }; |
| |
| struct cbe_iic_regs { |
| u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */ |
| |
| /* IIC interrupt registers */ |
| struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ |
| |
| u64 iic_ir; /* 0x0440 */ |
| u64 iic_is; /* 0x0448 */ |
| #define CBE_IIC_IS_PMI 0x2 |
| |
| u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */ |
| |
| /* IOC FIR */ |
| u64 ioc_fir_reset; /* 0x0500 */ |
| u64 ioc_fir_set; /* 0x0508 */ |
| u64 ioc_checkstop_enable; /* 0x0510 */ |
| u64 ioc_fir_error_mask; /* 0x0518 */ |
| u64 ioc_syserr_enable; /* 0x0520 */ |
| u64 ioc_fir; /* 0x0528 */ |
| |
| u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */ |
| }; |
| |
| extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np); |
| extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu); |
| |
| |
| struct cbe_mic_tm_regs { |
| u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */ |
| |
| u64 mic_ctl_cnfg2; /* 0x0040 */ |
| #define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL |
| #define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL |
| #define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL |
| #define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL |
| |
| u64 pad_0x0048; /* 0x0048 */ |
| |
| u64 mic_aux_trc_base; /* 0x0050 */ |
| u64 mic_aux_trc_max_addr; /* 0x0058 */ |
| u64 mic_aux_trc_cur_addr; /* 0x0060 */ |
| u64 mic_aux_trc_grf_addr; /* 0x0068 */ |
| u64 mic_aux_trc_grf_data; /* 0x0070 */ |
| |
| u64 pad_0x0078; /* 0x0078 */ |
| |
| u64 mic_ctl_cnfg_0; /* 0x0080 */ |
| #define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL |
| |
| u64 pad_0x0088; /* 0x0088 */ |
| |
| u64 slow_fast_timer_0; /* 0x0090 */ |
| u64 slow_next_timer_0; /* 0x0098 */ |
| |
| u8 pad_0x00a0_0x01c0[0x01c0 - 0x0a0]; /* 0x00a0 */ |
| |
| u64 mic_ctl_cnfg_1; /* 0x01c0 */ |
| #define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL |
| u64 pad_0x01c8; /* 0x01c8 */ |
| |
| u64 slow_fast_timer_1; /* 0x01d0 */ |
| u64 slow_next_timer_1; /* 0x01d8 */ |
| |
| u8 pad_0x01e0_0x1000[0x1000 - 0x01e0]; /* 0x01e0 */ |
| }; |
| |
| extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); |
| extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); |
| |
| /* Init this module early */ |
| extern void cbe_regs_init(void); |
| |
| |
| #endif /* CBE_REGS_H */ |