| /* |
| * gpio-regulator.c |
| * |
| * Copyright 2011 Heiko Stuebner <heiko@sntech.de> |
| * |
| * based on fixed.c |
| * |
| * Copyright 2008 Wolfson Microelectronics PLC. |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * Copyright (c) 2009 Nokia Corporation |
| * Roger Quadros <ext-roger.quadros@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This is useful for systems with mixed controllable and |
| * non-controllable regulators, as well as for allowing testing on |
| * systems with no controllable regulators. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/regulator/gpio-regulator.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| |
| struct gpio_regulator_data { |
| struct regulator_desc desc; |
| struct regulator_dev *dev; |
| |
| struct gpio *gpios; |
| int nr_gpios; |
| |
| struct gpio_regulator_state *states; |
| int nr_states; |
| |
| int state; |
| }; |
| |
| static int gpio_regulator_get_value(struct regulator_dev *dev) |
| { |
| struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| int ptr; |
| |
| for (ptr = 0; ptr < data->nr_states; ptr++) |
| if (data->states[ptr].gpios == data->state) |
| return data->states[ptr].value; |
| |
| return -EINVAL; |
| } |
| |
| static int gpio_regulator_set_voltage(struct regulator_dev *dev, |
| int min_uV, int max_uV, |
| unsigned *selector) |
| { |
| struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| int ptr, target = 0, state, best_val = INT_MAX; |
| |
| for (ptr = 0; ptr < data->nr_states; ptr++) |
| if (data->states[ptr].value < best_val && |
| data->states[ptr].value >= min_uV && |
| data->states[ptr].value <= max_uV) { |
| target = data->states[ptr].gpios; |
| best_val = data->states[ptr].value; |
| if (selector) |
| *selector = ptr; |
| } |
| |
| if (best_val == INT_MAX) |
| return -EINVAL; |
| |
| for (ptr = 0; ptr < data->nr_gpios; ptr++) { |
| state = (target & (1 << ptr)) >> ptr; |
| gpio_set_value_cansleep(data->gpios[ptr].gpio, state); |
| } |
| data->state = target; |
| |
| return 0; |
| } |
| |
| static int gpio_regulator_list_voltage(struct regulator_dev *dev, |
| unsigned selector) |
| { |
| struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| |
| if (selector >= data->nr_states) |
| return -EINVAL; |
| |
| return data->states[selector].value; |
| } |
| |
| static int gpio_regulator_set_current_limit(struct regulator_dev *dev, |
| int min_uA, int max_uA) |
| { |
| struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| int ptr, target = 0, state, best_val = 0; |
| |
| for (ptr = 0; ptr < data->nr_states; ptr++) |
| if (data->states[ptr].value > best_val && |
| data->states[ptr].value >= min_uA && |
| data->states[ptr].value <= max_uA) { |
| target = data->states[ptr].gpios; |
| best_val = data->states[ptr].value; |
| } |
| |
| if (best_val == 0) |
| return -EINVAL; |
| |
| for (ptr = 0; ptr < data->nr_gpios; ptr++) { |
| state = (target & (1 << ptr)) >> ptr; |
| gpio_set_value_cansleep(data->gpios[ptr].gpio, state); |
| } |
| data->state = target; |
| |
| return 0; |
| } |
| |
| static struct regulator_ops gpio_regulator_voltage_ops = { |
| .get_voltage = gpio_regulator_get_value, |
| .set_voltage = gpio_regulator_set_voltage, |
| .list_voltage = gpio_regulator_list_voltage, |
| }; |
| |
| static struct gpio_regulator_config * |
| of_get_gpio_regulator_config(struct device *dev, struct device_node *np, |
| const struct regulator_desc *desc) |
| { |
| struct gpio_regulator_config *config; |
| const char *regtype; |
| int proplen, gpio, i; |
| int ret; |
| |
| config = devm_kzalloc(dev, |
| sizeof(struct gpio_regulator_config), |
| GFP_KERNEL); |
| if (!config) |
| return ERR_PTR(-ENOMEM); |
| |
| config->init_data = of_get_regulator_init_data(dev, np, desc); |
| if (!config->init_data) |
| return ERR_PTR(-EINVAL); |
| |
| config->supply_name = config->init_data->constraints.name; |
| |
| if (of_property_read_bool(np, "enable-active-high")) |
| config->enable_high = true; |
| |
| if (of_property_read_bool(np, "enable-at-boot")) |
| config->enabled_at_boot = true; |
| |
| of_property_read_u32(np, "startup-delay-us", &config->startup_delay); |
| |
| config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); |
| |
| /* Fetch GPIOs. - optional property*/ |
| ret = of_gpio_count(np); |
| if ((ret < 0) && (ret != -ENOENT)) |
| return ERR_PTR(ret); |
| |
| if (ret > 0) { |
| config->nr_gpios = ret; |
| config->gpios = devm_kzalloc(dev, |
| sizeof(struct gpio) * config->nr_gpios, |
| GFP_KERNEL); |
| if (!config->gpios) |
| return ERR_PTR(-ENOMEM); |
| |
| proplen = of_property_count_u32_elems(np, "gpios-states"); |
| /* optional property */ |
| if (proplen < 0) |
| proplen = 0; |
| |
| if (proplen > 0 && proplen != config->nr_gpios) { |
| dev_warn(dev, "gpios <-> gpios-states mismatch\n"); |
| proplen = 0; |
| } |
| |
| for (i = 0; i < config->nr_gpios; i++) { |
| gpio = of_get_named_gpio(np, "gpios", i); |
| if (gpio < 0) |
| break; |
| config->gpios[i].gpio = gpio; |
| if (proplen > 0) { |
| of_property_read_u32_index(np, "gpios-states", |
| i, &ret); |
| if (ret) |
| config->gpios[i].flags = |
| GPIOF_OUT_INIT_HIGH; |
| } |
| } |
| } |
| |
| /* Fetch states. */ |
| proplen = of_property_count_u32_elems(np, "states"); |
| if (proplen < 0) { |
| dev_err(dev, "No 'states' property found\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| config->states = devm_kzalloc(dev, |
| sizeof(struct gpio_regulator_state) |
| * (proplen / 2), |
| GFP_KERNEL); |
| if (!config->states) |
| return ERR_PTR(-ENOMEM); |
| |
| for (i = 0; i < proplen / 2; i++) { |
| of_property_read_u32_index(np, "states", i * 2, |
| &config->states[i].value); |
| of_property_read_u32_index(np, "states", i * 2 + 1, |
| &config->states[i].gpios); |
| } |
| config->nr_states = i; |
| |
| config->type = REGULATOR_VOLTAGE; |
| ret = of_property_read_string(np, "regulator-type", ®type); |
| if (ret >= 0) { |
| if (!strncmp("voltage", regtype, 7)) |
| config->type = REGULATOR_VOLTAGE; |
| else if (!strncmp("current", regtype, 7)) |
| config->type = REGULATOR_CURRENT; |
| else |
| dev_warn(dev, "Unknown regulator-type '%s'\n", |
| regtype); |
| } |
| |
| return config; |
| } |
| |
| static struct regulator_ops gpio_regulator_current_ops = { |
| .get_current_limit = gpio_regulator_get_value, |
| .set_current_limit = gpio_regulator_set_current_limit, |
| }; |
| |
| static int gpio_regulator_probe(struct platform_device *pdev) |
| { |
| struct gpio_regulator_config *config = dev_get_platdata(&pdev->dev); |
| struct device_node *np = pdev->dev.of_node; |
| struct gpio_regulator_data *drvdata; |
| struct regulator_config cfg = { }; |
| int ptr, ret, state; |
| |
| drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data), |
| GFP_KERNEL); |
| if (drvdata == NULL) |
| return -ENOMEM; |
| |
| if (np) { |
| config = of_get_gpio_regulator_config(&pdev->dev, np, |
| &drvdata->desc); |
| if (IS_ERR(config)) |
| return PTR_ERR(config); |
| } |
| |
| drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL); |
| if (drvdata->desc.name == NULL) { |
| dev_err(&pdev->dev, "Failed to allocate supply name\n"); |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| if (config->nr_gpios != 0) { |
| drvdata->gpios = kmemdup(config->gpios, |
| config->nr_gpios * sizeof(struct gpio), |
| GFP_KERNEL); |
| if (drvdata->gpios == NULL) { |
| dev_err(&pdev->dev, "Failed to allocate gpio data\n"); |
| ret = -ENOMEM; |
| goto err_name; |
| } |
| |
| drvdata->nr_gpios = config->nr_gpios; |
| ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "Could not obtain regulator setting GPIOs: %d\n", ret); |
| goto err_memstate; |
| } |
| } |
| |
| drvdata->states = kmemdup(config->states, |
| config->nr_states * |
| sizeof(struct gpio_regulator_state), |
| GFP_KERNEL); |
| if (drvdata->states == NULL) { |
| dev_err(&pdev->dev, "Failed to allocate state data\n"); |
| ret = -ENOMEM; |
| goto err_memgpio; |
| } |
| drvdata->nr_states = config->nr_states; |
| |
| drvdata->desc.owner = THIS_MODULE; |
| drvdata->desc.enable_time = config->startup_delay; |
| |
| /* handle regulator type*/ |
| switch (config->type) { |
| case REGULATOR_VOLTAGE: |
| drvdata->desc.type = REGULATOR_VOLTAGE; |
| drvdata->desc.ops = &gpio_regulator_voltage_ops; |
| drvdata->desc.n_voltages = config->nr_states; |
| break; |
| case REGULATOR_CURRENT: |
| drvdata->desc.type = REGULATOR_CURRENT; |
| drvdata->desc.ops = &gpio_regulator_current_ops; |
| break; |
| default: |
| dev_err(&pdev->dev, "No regulator type set\n"); |
| ret = -EINVAL; |
| goto err_memgpio; |
| } |
| |
| /* build initial state from gpio init data. */ |
| state = 0; |
| for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) { |
| if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH) |
| state |= (1 << ptr); |
| } |
| drvdata->state = state; |
| |
| cfg.dev = &pdev->dev; |
| cfg.init_data = config->init_data; |
| cfg.driver_data = drvdata; |
| cfg.of_node = np; |
| |
| if (gpio_is_valid(config->enable_gpio)) { |
| cfg.ena_gpio = config->enable_gpio; |
| cfg.ena_gpio_initialized = true; |
| } |
| cfg.ena_gpio_invert = !config->enable_high; |
| if (config->enabled_at_boot) { |
| if (config->enable_high) |
| cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; |
| else |
| cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; |
| } else { |
| if (config->enable_high) |
| cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; |
| else |
| cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; |
| } |
| |
| drvdata->dev = regulator_register(&drvdata->desc, &cfg); |
| if (IS_ERR(drvdata->dev)) { |
| ret = PTR_ERR(drvdata->dev); |
| dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret); |
| goto err_stategpio; |
| } |
| |
| platform_set_drvdata(pdev, drvdata); |
| |
| return 0; |
| |
| err_stategpio: |
| gpio_free_array(drvdata->gpios, drvdata->nr_gpios); |
| err_memstate: |
| kfree(drvdata->states); |
| err_memgpio: |
| kfree(drvdata->gpios); |
| err_name: |
| kfree(drvdata->desc.name); |
| err: |
| return ret; |
| } |
| |
| static int gpio_regulator_remove(struct platform_device *pdev) |
| { |
| struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev); |
| |
| regulator_unregister(drvdata->dev); |
| |
| gpio_free_array(drvdata->gpios, drvdata->nr_gpios); |
| |
| kfree(drvdata->states); |
| kfree(drvdata->gpios); |
| |
| kfree(drvdata->desc.name); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_OF) |
| static const struct of_device_id regulator_gpio_of_match[] = { |
| { .compatible = "regulator-gpio", }, |
| {}, |
| }; |
| #endif |
| |
| static struct platform_driver gpio_regulator_driver = { |
| .probe = gpio_regulator_probe, |
| .remove = gpio_regulator_remove, |
| .driver = { |
| .name = "gpio-regulator", |
| .owner = THIS_MODULE, |
| .of_match_table = of_match_ptr(regulator_gpio_of_match), |
| }, |
| }; |
| |
| static int __init gpio_regulator_init(void) |
| { |
| return platform_driver_register(&gpio_regulator_driver); |
| } |
| subsys_initcall(gpio_regulator_init); |
| |
| static void __exit gpio_regulator_exit(void) |
| { |
| platform_driver_unregister(&gpio_regulator_driver); |
| } |
| module_exit(gpio_regulator_exit); |
| |
| MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); |
| MODULE_DESCRIPTION("gpio voltage regulator"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:gpio-regulator"); |