| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # QLogic network device configuration |
| # |
| |
| config NET_VENDOR_QLOGIC |
| bool "QLogic devices" |
| default y |
| depends on PCI |
| help |
| If you have a network (Ethernet) card belonging to this class, say Y. |
| |
| Note that the answer to this question doesn't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about QLogic cards. If you say Y, you will be asked for |
| your specific card in the following questions. |
| |
| if NET_VENDOR_QLOGIC |
| |
| config QLA3XXX |
| tristate "QLogic QLA3XXX Network Driver Support" |
| depends on PCI |
| help |
| This driver supports QLogic ISP3XXX gigabit Ethernet cards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called qla3xxx. |
| |
| config QLCNIC |
| tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support" |
| depends on PCI |
| select FW_LOADER |
| help |
| This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet |
| devices. |
| |
| config QLCNIC_SRIOV |
| bool "QLOGIC QLCNIC 83XX family SR-IOV Support" |
| depends on QLCNIC && PCI_IOV |
| default y |
| help |
| This configuration parameter enables Single Root Input Output |
| Virtualization support for QLE83XX Converged Ethernet devices. |
| This allows for virtual function acceleration in virtualized |
| environments. |
| |
| config QLCNIC_DCB |
| bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support" |
| depends on QLCNIC && DCB |
| default y |
| help |
| This configuration parameter enables DCB support in QLE83XX |
| and QLE82XX Converged Ethernet devices. This allows for DCB |
| get operations support through rtNetlink interface. Only CEE |
| mode of DCB is supported. PG and PFC values are related only |
| to Tx. |
| |
| config QLCNIC_HWMON |
| bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support" |
| depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m) |
| default y |
| help |
| This configuration parameter can be used to read the |
| board temperature in Converged Ethernet devices |
| supported by qlcnic. |
| |
| This data is available via the hwmon sysfs interface. |
| |
| config NETXEN_NIC |
| tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" |
| depends on PCI |
| select FW_LOADER |
| help |
| This enables the support for NetXen's Gigabit Ethernet card. |
| |
| config QED |
| tristate "QLogic QED 25/40/100Gb core driver" |
| depends on PCI |
| select ZLIB_INFLATE |
| select CRC8 |
| select CRC32 |
| select NET_DEVLINK |
| help |
| This enables the support for Marvell FastLinQ adapters family. |
| |
| config QED_LL2 |
| bool |
| |
| config QED_SRIOV |
| bool "QLogic QED 25/40/100Gb SR-IOV support" |
| depends on QED && PCI_IOV |
| default y |
| help |
| This configuration parameter enables Single Root Input Output |
| Virtualization support for QED devices. |
| This allows for virtual function acceleration in virtualized |
| environments. |
| |
| config QEDE |
| tristate "QLogic QED 25/40/100Gb Ethernet NIC" |
| depends on QED |
| imply PTP_1588_CLOCK |
| help |
| This enables the support for Marvell FastLinQ adapters family, |
| ethernet driver. |
| |
| config QED_RDMA |
| bool |
| |
| config QED_ISCSI |
| bool |
| |
| config QED_FCOE |
| bool |
| |
| config QED_OOO |
| bool |
| |
| endif # NET_VENDOR_QLOGIC |
