| // SPDX-License-Identifier: ISC |
| /* |
| * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> |
| */ |
| |
| #include "mt76x2u.h" |
| #include "../mt76x02_usb.h" |
| |
| static int mt76x2u_start(struct ieee80211_hw *hw) |
| { |
| struct mt76x02_dev *dev = hw->priv; |
| int ret; |
| |
| ret = mt76x02u_mac_start(dev); |
| if (ret) |
| return ret; |
| |
| ieee80211_queue_delayed_work(mt76_hw(dev), &dev->mt76.mac_work, |
| MT_MAC_WORK_INTERVAL); |
| set_bit(MT76_STATE_RUNNING, &dev->mphy.state); |
| |
| return 0; |
| } |
| |
| static void mt76x2u_stop(struct ieee80211_hw *hw) |
| { |
| struct mt76x02_dev *dev = hw->priv; |
| |
| clear_bit(MT76_STATE_RUNNING, &dev->mphy.state); |
| mt76u_stop_tx(&dev->mt76); |
| mt76x2u_stop_hw(dev); |
| } |
| |
| static int |
| mt76x2u_set_channel(struct mt76x02_dev *dev, |
| struct cfg80211_chan_def *chandef) |
| { |
| int err; |
| |
| cancel_delayed_work_sync(&dev->cal_work); |
| mt76x02_pre_tbtt_enable(dev, false); |
| |
| mutex_lock(&dev->mt76.mutex); |
| set_bit(MT76_RESET, &dev->mphy.state); |
| |
| mt76_set_channel(&dev->mphy); |
| |
| mt76x2_mac_stop(dev, false); |
| |
| err = mt76x2u_phy_set_channel(dev, chandef); |
| |
| mt76x02_mac_cc_reset(dev); |
| mt76x2_mac_resume(dev); |
| |
| clear_bit(MT76_RESET, &dev->mphy.state); |
| mutex_unlock(&dev->mt76.mutex); |
| |
| mt76x02_pre_tbtt_enable(dev, true); |
| mt76_txq_schedule_all(&dev->mphy); |
| |
| return err; |
| } |
| |
| static int |
| mt76x2u_config(struct ieee80211_hw *hw, u32 changed) |
| { |
| struct mt76x02_dev *dev = hw->priv; |
| int err = 0; |
| |
| mutex_lock(&dev->mt76.mutex); |
| |
| if (changed & IEEE80211_CONF_CHANGE_MONITOR) { |
| if (!(hw->conf.flags & IEEE80211_CONF_MONITOR)) |
| dev->mt76.rxfilter |= MT_RX_FILTR_CFG_PROMISC; |
| else |
| dev->mt76.rxfilter &= ~MT_RX_FILTR_CFG_PROMISC; |
| mt76_wr(dev, MT_RX_FILTR_CFG, dev->mt76.rxfilter); |
| } |
| |
| if (changed & IEEE80211_CONF_CHANGE_POWER) { |
| dev->txpower_conf = hw->conf.power_level * 2; |
| |
| /* convert to per-chain power for 2x2 devices */ |
| dev->txpower_conf -= 6; |
| |
| if (test_bit(MT76_STATE_RUNNING, &dev->mphy.state)) |
| mt76x2_phy_set_txpower(dev); |
| } |
| |
| mutex_unlock(&dev->mt76.mutex); |
| |
| if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { |
| ieee80211_stop_queues(hw); |
| err = mt76x2u_set_channel(dev, &hw->conf.chandef); |
| ieee80211_wake_queues(hw); |
| } |
| |
| return err; |
| } |
| |
| const struct ieee80211_ops mt76x2u_ops = { |
| .tx = mt76x02_tx, |
| .start = mt76x2u_start, |
| .stop = mt76x2u_stop, |
| .add_interface = mt76x02_add_interface, |
| .remove_interface = mt76x02_remove_interface, |
| .sta_state = mt76_sta_state, |
| .sta_pre_rcu_remove = mt76_sta_pre_rcu_remove, |
| .set_key = mt76x02_set_key, |
| .ampdu_action = mt76x02_ampdu_action, |
| .config = mt76x2u_config, |
| .wake_tx_queue = mt76_wake_tx_queue, |
| .bss_info_changed = mt76x02_bss_info_changed, |
| .configure_filter = mt76x02_configure_filter, |
| .conf_tx = mt76x02_conf_tx, |
| .sw_scan_start = mt76_sw_scan, |
| .sw_scan_complete = mt76x02_sw_scan_complete, |
| .sta_rate_tbl_update = mt76x02_sta_rate_tbl_update, |
| .get_txpower = mt76_get_txpower, |
| .get_survey = mt76_get_survey, |
| .set_tim = mt76_set_tim, |
| .release_buffered_frames = mt76_release_buffered_frames, |
| .get_antenna = mt76_get_antenna, |
| }; |