| /* |
| * $Id: blkmtd.c,v 1.27 2005/11/07 11:14:24 gleixner Exp $ |
| * |
| * blkmtd.c - use a block device as a fake MTD |
| * |
| * Author: Simon Evans <spse@secret.org.uk> |
| * |
| * Copyright (C) 2001,2002 Simon Evans |
| * |
| * Licence: GPL |
| * |
| * How it works: |
| * The driver uses raw/io to read/write the device and the page |
| * cache to cache access. Writes update the page cache with the |
| * new data and mark it dirty and add the page into a BIO which |
| * is then written out. |
| * |
| * It can be loaded Read-Only to prevent erases and writes to the |
| * medium. |
| * |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/blkdev.h> |
| #include <linux/bio.h> |
| #include <linux/pagemap.h> |
| #include <linux/list.h> |
| #include <linux/init.h> |
| #include <linux/mtd/mtd.h> |
| |
| |
| #define err(format, arg...) printk(KERN_ERR "blkmtd: " format "\n" , ## arg) |
| #define info(format, arg...) printk(KERN_INFO "blkmtd: " format "\n" , ## arg) |
| #define warn(format, arg...) printk(KERN_WARNING "blkmtd: " format "\n" , ## arg) |
| #define crit(format, arg...) printk(KERN_CRIT "blkmtd: " format "\n" , ## arg) |
| |
| |
| /* Default erase size in K, always make it a multiple of PAGE_SIZE */ |
| #define CONFIG_MTD_BLKDEV_ERASESIZE (128 << 10) /* 128KiB */ |
| #define VERSION "$Revision: 1.27 $" |
| |
| /* Info for the block device */ |
| struct blkmtd_dev { |
| struct list_head list; |
| struct block_device *blkdev; |
| struct mtd_info mtd_info; |
| struct semaphore wrbuf_mutex; |
| }; |
| |
| |
| /* Static info about the MTD, used in cleanup_module */ |
| static LIST_HEAD(blkmtd_device_list); |
| |
| |
| static void blkmtd_sync(struct mtd_info *mtd); |
| |
| #define MAX_DEVICES 4 |
| |
| /* Module parameters passed by insmod/modprobe */ |
| static char *device[MAX_DEVICES]; /* the block device to use */ |
| static int erasesz[MAX_DEVICES]; /* optional default erase size */ |
| static int ro[MAX_DEVICES]; /* optional read only flag */ |
| static int sync; |
| |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Simon Evans <spse@secret.org.uk>"); |
| MODULE_DESCRIPTION("Emulate an MTD using a block device"); |
| module_param_array(device, charp, NULL, 0); |
| MODULE_PARM_DESC(device, "block device to use"); |
| module_param_array(erasesz, int, NULL, 0); |
| MODULE_PARM_DESC(erasesz, "optional erase size to use in KiB. eg 4=4KiB."); |
| module_param_array(ro, bool, NULL, 0); |
| MODULE_PARM_DESC(ro, "1=Read only, writes and erases cause errors"); |
| module_param(sync, bool, 0); |
| MODULE_PARM_DESC(sync, "1=Synchronous writes"); |
| |
| |
| /* completion handler for BIO reads */ |
| static int bi_read_complete(struct bio *bio, unsigned int bytes_done, int error) |
| { |
| if (bio->bi_size) |
| return 1; |
| |
| complete((struct completion*)bio->bi_private); |
| return 0; |
| } |
| |
| |
| /* completion handler for BIO writes */ |
| static int bi_write_complete(struct bio *bio, unsigned int bytes_done, int error) |
| { |
| const int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags); |
| struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1; |
| |
| if (bio->bi_size) |
| return 1; |
| |
| if(!uptodate) |
| err("bi_write_complete: not uptodate\n"); |
| |
| do { |
| struct page *page = bvec->bv_page; |
| DEBUG(3, "Cleaning up page %ld\n", page->index); |
| if (--bvec >= bio->bi_io_vec) |
| prefetchw(&bvec->bv_page->flags); |
| |
| if (uptodate) { |
| SetPageUptodate(page); |
| } else { |
| ClearPageUptodate(page); |
| SetPageError(page); |
| } |
| ClearPageDirty(page); |
| unlock_page(page); |
| page_cache_release(page); |
| } while (bvec >= bio->bi_io_vec); |
| |
| complete((struct completion*)bio->bi_private); |
| return 0; |
| } |
| |
| |
| /* read one page from the block device */ |
| static int blkmtd_readpage(struct blkmtd_dev *dev, struct page *page) |
| { |
| struct bio *bio; |
| struct completion event; |
| int err = -ENOMEM; |
| |
| if(PageUptodate(page)) { |
| DEBUG(2, "blkmtd: readpage page %ld is already upto date\n", page->index); |
| unlock_page(page); |
| return 0; |
| } |
| |
| ClearPageUptodate(page); |
| ClearPageError(page); |
| |
| bio = bio_alloc(GFP_KERNEL, 1); |
| if(bio) { |
| init_completion(&event); |
| bio->bi_bdev = dev->blkdev; |
| bio->bi_sector = page->index << (PAGE_SHIFT-9); |
| bio->bi_private = &event; |
| bio->bi_end_io = bi_read_complete; |
| if(bio_add_page(bio, page, PAGE_SIZE, 0) == PAGE_SIZE) { |
| submit_bio(READ_SYNC, bio); |
| wait_for_completion(&event); |
| err = test_bit(BIO_UPTODATE, &bio->bi_flags) ? 0 : -EIO; |
| bio_put(bio); |
| } |
| } |
| |
| if(err) |
| SetPageError(page); |
| else |
| SetPageUptodate(page); |
| flush_dcache_page(page); |
| unlock_page(page); |
| return err; |
| } |
| |
| |
| /* write out the current BIO and wait for it to finish */ |
| static int blkmtd_write_out(struct bio *bio) |
| { |
| struct completion event; |
| int err; |
| |
| if(!bio->bi_vcnt) { |
| bio_put(bio); |
| return 0; |
| } |
| |
| init_completion(&event); |
| bio->bi_private = &event; |
| bio->bi_end_io = bi_write_complete; |
| submit_bio(WRITE_SYNC, bio); |
| wait_for_completion(&event); |
| DEBUG(3, "submit_bio completed, bi_vcnt = %d\n", bio->bi_vcnt); |
| err = test_bit(BIO_UPTODATE, &bio->bi_flags) ? 0 : -EIO; |
| bio_put(bio); |
| return err; |
| } |
| |
| |
| /** |
| * blkmtd_add_page - add a page to the current BIO |
| * @bio: bio to add to (NULL to alloc initial bio) |
| * @blkdev: block device |
| * @page: page to add |
| * @pagecnt: pages left to add |
| * |
| * Adds a page to the current bio, allocating it if necessary. If it cannot be |
| * added, the current bio is written out and a new one is allocated. Returns |
| * the new bio to add or NULL on error |
| */ |
| static struct bio *blkmtd_add_page(struct bio *bio, struct block_device *blkdev, |
| struct page *page, int pagecnt) |
| { |
| |
| retry: |
| if(!bio) { |
| bio = bio_alloc(GFP_KERNEL, pagecnt); |
| if(!bio) |
| return NULL; |
| bio->bi_sector = page->index << (PAGE_SHIFT-9); |
| bio->bi_bdev = blkdev; |
| } |
| |
| if(bio_add_page(bio, page, PAGE_SIZE, 0) != PAGE_SIZE) { |
| blkmtd_write_out(bio); |
| bio = NULL; |
| goto retry; |
| } |
| return bio; |
| } |
| |
| |
| /** |
| * write_pages - write block of data to device via the page cache |
| * @dev: device to write to |
| * @buf: data source or NULL if erase (output is set to 0xff) |
| * @to: offset into output device |
| * @len: amount to data to write |
| * @retlen: amount of data written |
| * |
| * Grab pages from the page cache and fill them with the source data. |
| * Non page aligned start and end result in a readin of the page and |
| * part of the page being modified. Pages are added to the bio and then written |
| * out. |
| */ |
| static int write_pages(struct blkmtd_dev *dev, const u_char *buf, loff_t to, |
| size_t len, size_t *retlen) |
| { |
| int pagenr, offset; |
| size_t start_len = 0, end_len; |
| int pagecnt = 0; |
| int err = 0; |
| struct bio *bio = NULL; |
| size_t thislen = 0; |
| |
| pagenr = to >> PAGE_SHIFT; |
| offset = to & ~PAGE_MASK; |
| |
| DEBUG(2, "blkmtd: write_pages: buf = %p to = %ld len = %zd pagenr = %d offset = %d\n", |
| buf, (long)to, len, pagenr, offset); |
| |
| /* see if we have to do a partial write at the start */ |
| if(offset) { |
| start_len = ((offset + len) > PAGE_SIZE) ? PAGE_SIZE - offset : len; |
| len -= start_len; |
| } |
| |
| /* calculate the length of the other two regions */ |
| end_len = len & ~PAGE_MASK; |
| len -= end_len; |
| |
| if(start_len) |
| pagecnt++; |
| |
| if(len) |
| pagecnt += len >> PAGE_SHIFT; |
| |
| if(end_len) |
| pagecnt++; |
| |
| down(&dev->wrbuf_mutex); |
| |
| DEBUG(3, "blkmtd: write: start_len = %zd len = %zd end_len = %zd pagecnt = %d\n", |
| start_len, len, end_len, pagecnt); |
| |
| if(start_len) { |
| /* do partial start region */ |
| struct page *page; |
| |
| DEBUG(3, "blkmtd: write: doing partial start, page = %d len = %zd offset = %d\n", |
| pagenr, start_len, offset); |
| |
| BUG_ON(!buf); |
| page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev); |
| lock_page(page); |
| if(PageDirty(page)) { |
| err("to = %lld start_len = %zd len = %zd end_len = %zd pagenr = %d\n", |
| to, start_len, len, end_len, pagenr); |
| BUG(); |
| } |
| memcpy(page_address(page)+offset, buf, start_len); |
| SetPageDirty(page); |
| SetPageUptodate(page); |
| buf += start_len; |
| thislen = start_len; |
| bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt); |
| if(!bio) { |
| err = -ENOMEM; |
| err("bio_add_page failed\n"); |
| goto write_err; |
| } |
| pagecnt--; |
| pagenr++; |
| } |
| |
| /* Now do the main loop to a page aligned, n page sized output */ |
| if(len) { |
| int pagesc = len >> PAGE_SHIFT; |
| DEBUG(3, "blkmtd: write: whole pages start = %d, count = %d\n", |
| pagenr, pagesc); |
| while(pagesc) { |
| struct page *page; |
| |
| /* see if page is in the page cache */ |
| DEBUG(3, "blkmtd: write: grabbing page %d from page cache\n", pagenr); |
| page = grab_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr); |
| if(PageDirty(page)) { |
| BUG(); |
| } |
| if(!page) { |
| warn("write: cannot grab cache page %d", pagenr); |
| err = -ENOMEM; |
| goto write_err; |
| } |
| if(!buf) { |
| memset(page_address(page), 0xff, PAGE_SIZE); |
| } else { |
| memcpy(page_address(page), buf, PAGE_SIZE); |
| buf += PAGE_SIZE; |
| } |
| bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt); |
| if(!bio) { |
| err = -ENOMEM; |
| err("bio_add_page failed\n"); |
| goto write_err; |
| } |
| pagenr++; |
| pagecnt--; |
| SetPageDirty(page); |
| SetPageUptodate(page); |
| pagesc--; |
| thislen += PAGE_SIZE; |
| } |
| } |
| |
| if(end_len) { |
| /* do the third region */ |
| struct page *page; |
| DEBUG(3, "blkmtd: write: doing partial end, page = %d len = %zd\n", |
| pagenr, end_len); |
| BUG_ON(!buf); |
| page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev); |
| lock_page(page); |
| if(PageDirty(page)) { |
| err("to = %lld start_len = %zd len = %zd end_len = %zd pagenr = %d\n", |
| to, start_len, len, end_len, pagenr); |
| BUG(); |
| } |
| memcpy(page_address(page), buf, end_len); |
| SetPageDirty(page); |
| SetPageUptodate(page); |
| DEBUG(3, "blkmtd: write: writing out partial end\n"); |
| thislen += end_len; |
| bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt); |
| if(!bio) { |
| err = -ENOMEM; |
| err("bio_add_page failed\n"); |
| goto write_err; |
| } |
| pagenr++; |
| } |
| |
| DEBUG(3, "blkmtd: write: got %d vectors to write\n", bio->bi_vcnt); |
| write_err: |
| if(bio) |
| blkmtd_write_out(bio); |
| |
| DEBUG(2, "blkmtd: write: end, retlen = %zd, err = %d\n", *retlen, err); |
| up(&dev->wrbuf_mutex); |
| |
| if(retlen) |
| *retlen = thislen; |
| return err; |
| } |
| |
| |
| /* erase a specified part of the device */ |
| static int blkmtd_erase(struct mtd_info *mtd, struct erase_info *instr) |
| { |
| struct blkmtd_dev *dev = mtd->priv; |
| struct mtd_erase_region_info *einfo = mtd->eraseregions; |
| int numregions = mtd->numeraseregions; |
| size_t from; |
| u_long len; |
| int err = -EIO; |
| size_t retlen; |
| |
| instr->state = MTD_ERASING; |
| from = instr->addr; |
| len = instr->len; |
| |
| /* check erase region has valid start and length */ |
| DEBUG(2, "blkmtd: erase: dev = `%s' from = 0x%zx len = 0x%lx\n", |
| mtd->name+9, from, len); |
| while(numregions) { |
| DEBUG(3, "blkmtd: checking erase region = 0x%08X size = 0x%X num = 0x%x\n", |
| einfo->offset, einfo->erasesize, einfo->numblocks); |
| if(from >= einfo->offset |
| && from < einfo->offset + (einfo->erasesize * einfo->numblocks)) { |
| if(len == einfo->erasesize |
| && ( (from - einfo->offset) % einfo->erasesize == 0)) |
| break; |
| } |
| numregions--; |
| einfo++; |
| } |
| |
| if(!numregions) { |
| /* Not a valid erase block */ |
| err("erase: invalid erase request 0x%lX @ 0x%08zX", len, from); |
| instr->state = MTD_ERASE_FAILED; |
| err = -EIO; |
| } |
| |
| if(instr->state != MTD_ERASE_FAILED) { |
| /* do the erase */ |
| DEBUG(3, "Doing erase from = %zd len = %ld\n", from, len); |
| err = write_pages(dev, NULL, from, len, &retlen); |
| if(err || retlen != len) { |
| err("erase failed err = %d", err); |
| instr->state = MTD_ERASE_FAILED; |
| } else { |
| instr->state = MTD_ERASE_DONE; |
| } |
| } |
| |
| DEBUG(3, "blkmtd: erase: checking callback\n"); |
| mtd_erase_callback(instr); |
| DEBUG(2, "blkmtd: erase: finished (err = %d)\n", err); |
| return err; |
| } |
| |
| |
| /* read a range of the data via the page cache */ |
| static int blkmtd_read(struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, u_char *buf) |
| { |
| struct blkmtd_dev *dev = mtd->priv; |
| int err = 0; |
| int offset; |
| int pagenr, pages; |
| size_t thislen = 0; |
| |
| DEBUG(2, "blkmtd: read: dev = `%s' from = %lld len = %zd buf = %p\n", |
| mtd->name+9, from, len, buf); |
| |
| if(from > mtd->size) |
| return -EINVAL; |
| if(from + len > mtd->size) |
| len = mtd->size - from; |
| |
| pagenr = from >> PAGE_SHIFT; |
| offset = from - (pagenr << PAGE_SHIFT); |
| |
| pages = (offset+len+PAGE_SIZE-1) >> PAGE_SHIFT; |
| DEBUG(3, "blkmtd: read: pagenr = %d offset = %d, pages = %d\n", |
| pagenr, offset, pages); |
| |
| while(pages) { |
| struct page *page; |
| int cpylen; |
| |
| DEBUG(3, "blkmtd: read: looking for page: %d\n", pagenr); |
| page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev); |
| if(IS_ERR(page)) { |
| err = -EIO; |
| goto readerr; |
| } |
| |
| cpylen = (PAGE_SIZE > len) ? len : PAGE_SIZE; |
| if(offset+cpylen > PAGE_SIZE) |
| cpylen = PAGE_SIZE-offset; |
| |
| memcpy(buf + thislen, page_address(page) + offset, cpylen); |
| offset = 0; |
| len -= cpylen; |
| thislen += cpylen; |
| pagenr++; |
| pages--; |
| if(!PageDirty(page)) |
| page_cache_release(page); |
| } |
| |
| readerr: |
| if(retlen) |
| *retlen = thislen; |
| DEBUG(2, "blkmtd: end read: retlen = %zd, err = %d\n", thislen, err); |
| return err; |
| } |
| |
| |
| /* write data to the underlying device */ |
| static int blkmtd_write(struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, const u_char *buf) |
| { |
| struct blkmtd_dev *dev = mtd->priv; |
| int err; |
| |
| if(!len) |
| return 0; |
| |
| DEBUG(2, "blkmtd: write: dev = `%s' to = %lld len = %zd buf = %p\n", |
| mtd->name+9, to, len, buf); |
| |
| if(to >= mtd->size) { |
| return -ENOSPC; |
| } |
| |
| if(to + len > mtd->size) { |
| len = mtd->size - to; |
| } |
| |
| err = write_pages(dev, buf, to, len, retlen); |
| if(err > 0) |
| err = 0; |
| DEBUG(2, "blkmtd: write: end, err = %d\n", err); |
| return err; |
| } |
| |
| |
| /* sync the device - wait until the write queue is empty */ |
| static void blkmtd_sync(struct mtd_info *mtd) |
| { |
| /* Currently all writes are synchronous */ |
| } |
| |
| |
| static void free_device(struct blkmtd_dev *dev) |
| { |
| DEBUG(2, "blkmtd: free_device() dev = %p\n", dev); |
| if(dev) { |
| if(dev->mtd_info.eraseregions) |
| kfree(dev->mtd_info.eraseregions); |
| if(dev->mtd_info.name) |
| kfree(dev->mtd_info.name); |
| |
| if(dev->blkdev) { |
| invalidate_inode_pages(dev->blkdev->bd_inode->i_mapping); |
| close_bdev_excl(dev->blkdev); |
| } |
| kfree(dev); |
| } |
| } |
| |
| |
| /* For a given size and initial erase size, calculate the number |
| * and size of each erase region. Goes round the loop twice, |
| * once to find out how many regions, then allocates space, |
| * then round the loop again to fill it in. |
| */ |
| static struct mtd_erase_region_info *calc_erase_regions( |
| size_t erase_size, size_t total_size, int *regions) |
| { |
| struct mtd_erase_region_info *info = NULL; |
| |
| DEBUG(2, "calc_erase_regions, es = %zd size = %zd regions = %d\n", |
| erase_size, total_size, *regions); |
| /* Make any user specified erasesize be a power of 2 |
| and at least PAGE_SIZE */ |
| if(erase_size) { |
| int es = erase_size; |
| erase_size = 1; |
| while(es != 1) { |
| es >>= 1; |
| erase_size <<= 1; |
| } |
| if(erase_size < PAGE_SIZE) |
| erase_size = PAGE_SIZE; |
| } else { |
| erase_size = CONFIG_MTD_BLKDEV_ERASESIZE; |
| } |
| |
| *regions = 0; |
| |
| do { |
| int tot_size = total_size; |
| int er_size = erase_size; |
| int count = 0, offset = 0, regcnt = 0; |
| |
| while(tot_size) { |
| count = tot_size / er_size; |
| if(count) { |
| tot_size = tot_size % er_size; |
| if(info) { |
| DEBUG(2, "adding to erase info off=%d er=%d cnt=%d\n", |
| offset, er_size, count); |
| (info+regcnt)->offset = offset; |
| (info+regcnt)->erasesize = er_size; |
| (info+regcnt)->numblocks = count; |
| (*regions)++; |
| } |
| regcnt++; |
| offset += (count * er_size); |
| } |
| while(er_size > tot_size) |
| er_size >>= 1; |
| } |
| if(info == NULL) { |
| info = kmalloc(regcnt * sizeof(struct mtd_erase_region_info), GFP_KERNEL); |
| if(!info) |
| break; |
| } |
| } while(!(*regions)); |
| DEBUG(2, "calc_erase_regions done, es = %zd size = %zd regions = %d\n", |
| erase_size, total_size, *regions); |
| return info; |
| } |
| |
| |
| extern dev_t __init name_to_dev_t(const char *line); |
| |
| static struct blkmtd_dev *add_device(char *devname, int readonly, int erase_size) |
| { |
| struct block_device *bdev; |
| int mode; |
| struct blkmtd_dev *dev; |
| |
| if(!devname) |
| return NULL; |
| |
| /* Get a handle on the device */ |
| |
| |
| #ifdef MODULE |
| mode = (readonly) ? O_RDONLY : O_RDWR; |
| bdev = open_bdev_excl(devname, mode, NULL); |
| #else |
| mode = (readonly) ? FMODE_READ : FMODE_WRITE; |
| bdev = open_by_devnum(name_to_dev_t(devname), mode); |
| #endif |
| if(IS_ERR(bdev)) { |
| err("error: cannot open device %s", devname); |
| DEBUG(2, "blkmtd: opening bdev returned %ld\n", PTR_ERR(bdev)); |
| return NULL; |
| } |
| |
| DEBUG(1, "blkmtd: found a block device major = %d, minor = %d\n", |
| MAJOR(bdev->bd_dev), MINOR(bdev->bd_dev)); |
| |
| if(MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) { |
| err("attempting to use an MTD device as a block device"); |
| blkdev_put(bdev); |
| return NULL; |
| } |
| |
| dev = kmalloc(sizeof(struct blkmtd_dev), GFP_KERNEL); |
| if(dev == NULL) { |
| blkdev_put(bdev); |
| return NULL; |
| } |
| |
| memset(dev, 0, sizeof(struct blkmtd_dev)); |
| dev->blkdev = bdev; |
| if(!readonly) { |
| init_MUTEX(&dev->wrbuf_mutex); |
| } |
| |
| dev->mtd_info.size = dev->blkdev->bd_inode->i_size & PAGE_MASK; |
| |
| /* Setup the MTD structure */ |
| /* make the name contain the block device in */ |
| dev->mtd_info.name = kmalloc(sizeof("blkmtd: ") + strlen(devname), GFP_KERNEL); |
| if(dev->mtd_info.name == NULL) |
| goto devinit_err; |
| |
| sprintf(dev->mtd_info.name, "blkmtd: %s", devname); |
| dev->mtd_info.eraseregions = calc_erase_regions(erase_size, dev->mtd_info.size, |
| &dev->mtd_info.numeraseregions); |
| if(dev->mtd_info.eraseregions == NULL) |
| goto devinit_err; |
| |
| dev->mtd_info.erasesize = dev->mtd_info.eraseregions->erasesize; |
| DEBUG(1, "blkmtd: init: found %d erase regions\n", |
| dev->mtd_info.numeraseregions); |
| |
| if(readonly) { |
| dev->mtd_info.type = MTD_ROM; |
| dev->mtd_info.flags = MTD_CAP_ROM; |
| } else { |
| dev->mtd_info.type = MTD_RAM; |
| dev->mtd_info.flags = MTD_CAP_RAM; |
| dev->mtd_info.erase = blkmtd_erase; |
| dev->mtd_info.write = blkmtd_write; |
| dev->mtd_info.writev = default_mtd_writev; |
| dev->mtd_info.sync = blkmtd_sync; |
| } |
| dev->mtd_info.read = blkmtd_read; |
| dev->mtd_info.readv = default_mtd_readv; |
| dev->mtd_info.priv = dev; |
| dev->mtd_info.owner = THIS_MODULE; |
| |
| list_add(&dev->list, &blkmtd_device_list); |
| if (add_mtd_device(&dev->mtd_info)) { |
| /* Device didnt get added, so free the entry */ |
| list_del(&dev->list); |
| goto devinit_err; |
| } else { |
| info("mtd%d: [%s] erase_size = %dKiB %s", |
| dev->mtd_info.index, dev->mtd_info.name + strlen("blkmtd: "), |
| dev->mtd_info.erasesize >> 10, |
| readonly ? "(read-only)" : ""); |
| } |
| |
| return dev; |
| |
| devinit_err: |
| free_device(dev); |
| return NULL; |
| } |
| |
| |
| /* Cleanup and exit - sync the device and kill of the kernel thread */ |
| static void __devexit cleanup_blkmtd(void) |
| { |
| struct list_head *temp1, *temp2; |
| |
| /* Remove the MTD devices */ |
| list_for_each_safe(temp1, temp2, &blkmtd_device_list) { |
| struct blkmtd_dev *dev = list_entry(temp1, struct blkmtd_dev, |
| list); |
| blkmtd_sync(&dev->mtd_info); |
| del_mtd_device(&dev->mtd_info); |
| info("mtd%d: [%s] removed", dev->mtd_info.index, |
| dev->mtd_info.name + strlen("blkmtd: ")); |
| list_del(&dev->list); |
| free_device(dev); |
| } |
| } |
| |
| #ifndef MODULE |
| |
| /* Handle kernel boot params */ |
| |
| |
| static int __init param_blkmtd_device(char *str) |
| { |
| int i; |
| |
| for(i = 0; i < MAX_DEVICES; i++) { |
| device[i] = str; |
| DEBUG(2, "blkmtd: device setup: %d = %s\n", i, device[i]); |
| strsep(&str, ","); |
| } |
| return 1; |
| } |
| |
| |
| static int __init param_blkmtd_erasesz(char *str) |
| { |
| int i; |
| for(i = 0; i < MAX_DEVICES; i++) { |
| char *val = strsep(&str, ","); |
| if(val) |
| erasesz[i] = simple_strtoul(val, NULL, 0); |
| DEBUG(2, "blkmtd: erasesz setup: %d = %d\n", i, erasesz[i]); |
| } |
| |
| return 1; |
| } |
| |
| |
| static int __init param_blkmtd_ro(char *str) |
| { |
| int i; |
| for(i = 0; i < MAX_DEVICES; i++) { |
| char *val = strsep(&str, ","); |
| if(val) |
| ro[i] = simple_strtoul(val, NULL, 0); |
| DEBUG(2, "blkmtd: ro setup: %d = %d\n", i, ro[i]); |
| } |
| |
| return 1; |
| } |
| |
| |
| static int __init param_blkmtd_sync(char *str) |
| { |
| if(str[0] == '1') |
| sync = 1; |
| return 1; |
| } |
| |
| __setup("blkmtd_device=", param_blkmtd_device); |
| __setup("blkmtd_erasesz=", param_blkmtd_erasesz); |
| __setup("blkmtd_ro=", param_blkmtd_ro); |
| __setup("blkmtd_sync=", param_blkmtd_sync); |
| |
| #endif |
| |
| |
| /* Startup */ |
| static int __init init_blkmtd(void) |
| { |
| int i; |
| |
| info("version " VERSION); |
| /* Check args - device[0] is the bare minimum*/ |
| if(!device[0]) { |
| err("error: missing `device' name\n"); |
| return -EINVAL; |
| } |
| |
| for(i = 0; i < MAX_DEVICES; i++) |
| add_device(device[i], ro[i], erasesz[i] << 10); |
| |
| if(list_empty(&blkmtd_device_list)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| module_init(init_blkmtd); |
| module_exit(cleanup_blkmtd); |