blob: 358617115bb8ecebdf15ca6d806d0b10956ce190 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: AHCI SATA Controller
description: |
SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
It is possible, but not required, to represent each port as a sub-node.
It allows to enable each port independently when dealing with multiple
PHYs.
maintainers:
- Hans de Goede <hdegoede@redhat.com>
- Jens Axboe <axboe@kernel.dk>
select:
properties:
compatible:
contains:
enum:
- brcm,iproc-ahci
- cavium,octeon-7130-ahci
- hisilicon,hisi-ahci
- ibm,476gtr-ahci
- marvell,armada-3700-ahci
- marvell,armada-8k-ahci
- marvell,berlin2q-ahci
- socionext,uniphier-pro4-ahci
- socionext,uniphier-pxs2-ahci
- socionext,uniphier-pxs3-ahci
required:
- compatible
properties:
compatible:
oneOf:
- items:
- enum:
- brcm,iproc-ahci
- marvell,armada-8k-ahci
- marvell,berlin2-ahci
- marvell,berlin2q-ahci
- socionext,uniphier-pro4-ahci
- socionext,uniphier-pxs2-ahci
- socionext,uniphier-pxs3-ahci
- const: generic-ahci
- enum:
- cavium,octeon-7130-ahci
- hisilicon,hisi-ahci
- ibm,476gtr-ahci
- marvell,armada-3700-ahci
reg:
minItems: 1
maxItems: 2
reg-names:
maxItems: 1
clocks:
minItems: 1
maxItems: 3
clock-names:
minItems: 1
maxItems: 3
interrupts:
maxItems: 1
power-domains:
maxItems: 1
resets:
minItems: 1
maxItems: 3
patternProperties:
"^sata-port@[0-9a-f]+$":
$ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
anyOf:
- required: [ phys ]
- required: [ target-supply ]
unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
allOf:
- $ref: ahci-common.yaml#
- if:
properties:
compatible:
contains:
const: socionext,uniphier-pro4-ahci
then:
properties:
resets:
items:
- description: reset line for the parent
- description: reset line for the glue logic
- description: reset line for the controller
required:
- resets
else:
if:
properties:
compatible:
contains:
enum:
- socionext,uniphier-pxs2-ahci
- socionext,uniphier-pxs3-ahci
then:
properties:
resets:
items:
- description: reset for the glue logic
- description: reset for the controller
required:
- resets
else:
properties:
resets:
maxItems: 1
unevaluatedProperties: false
examples:
- |
sata@ffe08000 {
compatible = "snps,spear-ahci";
reg = <0xffe08000 0x1000>;
interrupts = <115>;
};
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/berlin2q.h>
#include <dt-bindings/ata/ahci.h>
sata@f7e90000 {
compatible = "marvell,berlin2q-ahci", "generic-ahci";
reg = <0xf7e90000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
hba-cap = <HBA_SMPS>;
sata0: sata-port@0 {
reg = <0>;
phys = <&sata_phy 0>;
target-supply = <&reg_sata0>;
hba-port-cap = <(HBA_PORT_FBSCP | HBA_PORT_ESP)>;
};
sata1: sata-port@1 {
reg = <1>;
phys = <&sata_phy 1>;
target-supply = <&reg_sata1>;
hba-port-cap = <(HBA_PORT_HPCP | HBA_PORT_MPSP | HBA_PORT_FBSCP)>;
};
};