blob: a8b34f58f8f49520e8c7bd6c900ad499c5cbba94 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-common.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale i.MX6 PCIe RC/EP controller
maintainers:
- Lucas Stach <l.stach@pengutronix.de>
- Richard Zhu <hongxing.zhu@nxp.com>
description:
Generic Freescale i.MX PCIe Root Port and Endpoint controller
properties.
properties:
clocks:
minItems: 3
maxItems: 4
clock-names:
minItems: 3
maxItems: 4
num-lanes:
const: 1
fsl,imx7d-pcie-phy:
$ref: /schemas/types.yaml#/definitions/phandle
description: A phandle to an fsl,imx7d-pcie-phy node. Additional
required properties for imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie,
and imx8mq-pcie-ep.
power-domains:
minItems: 1
items:
- description: The phandle pointing to the DISPLAY domain for
imx6sx-pcie, imx6sx-pcie-ep, to PCIE_PHY power domain for
imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie and imx8mq-pcie-ep.
- description: The phandle pointing to the PCIE_PHY power domains
for imx6sx-pcie and imx6sx-pcie-ep.
power-domain-names:
minItems: 1
items:
- const: pcie
- const: pcie_phy
resets:
minItems: 2
maxItems: 3
description: Phandles to PCIe-related reset lines exposed by SRC
IP block. Additional required by imx7d-pcie, imx7d-pcie-ep,
imx8mq-pcie, and imx8mq-pcie-ep.
reset-names:
minItems: 2
maxItems: 3
fsl,tx-deemph-gen1:
description: Gen1 De-emphasis value (optional required).
$ref: /schemas/types.yaml#/definitions/uint32
default: 0
fsl,tx-deemph-gen2-3p5db:
description: Gen2 (3.5db) De-emphasis value (optional required).
$ref: /schemas/types.yaml#/definitions/uint32
default: 0
fsl,tx-deemph-gen2-6db:
description: Gen2 (6db) De-emphasis value (optional required).
$ref: /schemas/types.yaml#/definitions/uint32
default: 20
fsl,tx-swing-full:
description: Gen2 TX SWING FULL value (optional required).
$ref: /schemas/types.yaml#/definitions/uint32
default: 127
fsl,tx-swing-low:
description: TX launch amplitude swing_low value (optional required).
$ref: /schemas/types.yaml#/definitions/uint32
default: 127
fsl,max-link-speed:
description: Specify PCI Gen for link capability (optional required).
Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
requirements and thus for gen2 capability a gen2 compliant clock
generator should be used and configured.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 3, 4]
default: 1
phys:
maxItems: 1
phy-names:
const: pcie-phy
vpcie-supply:
description: Should specify the regulator in charge of PCIe port power.
The regulator will be enabled when initializing the PCIe host and
disabled either as part of the init process or when shutting down
the host (optional required).
vph-supply:
description: Should specify the regulator in charge of VPH one of
the three PCIe PHY powers. This regulator can be supplied by both
1.8v and 3.3v voltage supplies (optional required).
required:
- clocks
- clock-names
- num-lanes
allOf:
- if:
properties:
compatible:
contains:
enum:
- fsl,imx6sx-pcie
- fsl,imx6sx-pcie-ep
then:
properties:
clock-names:
items:
- {}
- {}
- const: pcie_phy
- const: pcie_inbound_axi
power-domains:
minItems: 2
power-domain-names:
minItems: 2
- if:
properties:
compatible:
contains:
enum:
- fsl,imx8mq-pcie
- fsl,imx8mq-pcie-ep
then:
properties:
clock-names:
items:
- {}
- {}
- const: pcie_phy
- const: pcie_aux
- if:
properties:
compatible:
contains:
enum:
- fsl,imx6q-pcie
- fsl,imx6qp-pcie
- fsl,imx7d-pcie
- fsl,imx6q-pcie-ep
- fsl,imx6qp-pcie-ep
- fsl,imx7d-pcie-ep
then:
properties:
clock-names:
maxItems: 3
contains:
const: pcie_phy
- if:
properties:
compatible:
contains:
enum:
- fsl,imx8mm-pcie
- fsl,imx8mp-pcie
- fsl,imx8mm-pcie-ep
- fsl,imx8mp-pcie-ep
then:
properties:
clock-names:
maxItems: 3
contains:
const: pcie_aux
- if:
properties:
compatible:
contains:
enum:
- fsl,imx6q-pcie
- fsl,imx6qp-pcie
- fsl,imx6q-pcie-ep
- fsl,imx6qp-pcie-ep
then:
properties:
power-domains: false
power-domain-names: false
- if:
not:
properties:
compatible:
contains:
enum:
- fsl,imx6sx-pcie
- fsl,imx6q-pcie
- fsl,imx6qp-pcie
- fsl,imx95-pcie
- fsl,imx6sx-pcie-ep
- fsl,imx6q-pcie-ep
- fsl,imx6qp-pcie-ep
then:
properties:
power-domains:
maxItems: 1
power-domain-names: false
- if:
properties:
compatible:
contains:
enum:
- fsl,imx6q-pcie
- fsl,imx6sx-pcie
- fsl,imx6qp-pcie
- fsl,imx7d-pcie
- fsl,imx8mq-pcie
- fsl,imx6q-pcie-ep
- fsl,imx6sx-pcie-ep
- fsl,imx6qp-pcie-ep
- fsl,imx7d-pcie-ep
- fsl,imx8mq-pcie-ep
then:
properties:
resets:
minItems: 3
reset-names:
items:
- const: pciephy
- const: apps
- const: turnoff
else:
properties:
resets:
maxItems: 2
reset-names:
items:
- const: apps
- const: turnoff
additionalProperties: true
...