blob: 5a0d64d3ae6b9515eca803b7b749960d5144495a [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/renesas,pci-rcar-gen2.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas AHB to PCI bridge
maintainers:
- Marek Vasut <marek.vasut+renesas@gmail.com>
- Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
description: |
This is the bridge used internally to connect the USB controllers to the
AHB. There is one bridge instance per USB port connected to the internal
OHCI and EHCI controllers.
properties:
compatible:
oneOf:
- items:
- enum:
- renesas,pci-r8a7742 # RZ/G1H
- renesas,pci-r8a7743 # RZ/G1M
- renesas,pci-r8a7744 # RZ/G1N
- renesas,pci-r8a7745 # RZ/G1E
- renesas,pci-r8a7790 # R-Car H2
- renesas,pci-r8a7791 # R-Car M2-W
- renesas,pci-r8a7793 # R-Car M2-N
- renesas,pci-r8a7794 # R-Car E2
- const: renesas,pci-rcar-gen2 # R-Car Gen2 and RZ/G1
- items:
- enum:
- renesas,pci-r9a06g032 # RZ/N1D
- const: renesas,pci-rzn1 # RZ/N1
reg:
items:
- description: Operational registers for the OHCI/EHCI controllers.
- description: Bridge configuration and control registers.
interrupts:
maxItems: 1
clocks: true
clock-names: true
resets:
maxItems: 1
power-domains:
maxItems: 1
bus-range:
description: |
The PCI bus number range; as this is a single bus, the range
should be specified as the same value twice.
dma-ranges:
description: |
A single range for the inbound memory region. If not supplied,
defaults to 1GiB at 0x40000000. Note there are hardware restrictions on
the allowed combinations of address and size.
maxItems: 1
patternProperties:
'^usb@[0-1],0$':
type: object
description:
This a USB controller PCI device
properties:
reg:
description:
Identify the correct bus, device and function number in the
form <bdf 0 0 0 0>.
items:
minItems: 5
maxItems: 5
phys:
description:
Reference to the USB phy
maxItems: 1
phy-names:
maxItems: 1
required:
- reg
- phys
- phy-names
unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
- interrupt-map
- interrupt-map-mask
- clocks
- power-domains
- bus-range
- "#address-cells"
- "#size-cells"
- "#interrupt-cells"
allOf:
- $ref: /schemas/pci/pci-bus.yaml#
- if:
properties:
compatible:
contains:
enum:
- renesas,pci-rzn1
then:
properties:
clocks:
items:
- description: Internal bus clock (AHB) for HOST
- description: Internal bus clock (AHB) Power Management
- description: PCI clock for USB subsystem
clock-names:
items:
- const: hclkh
- const: hclkpm
- const: pciclk
required:
- clock-names
else:
properties:
clocks:
items:
- description: Device clock
clock-names:
items:
- const: pclk
required:
- resets
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/r8a7790-cpg-mssr.h>
#include <dt-bindings/power/r8a7790-sysc.h>
pci@ee090000 {
compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
device_type = "pci";
reg = <0xee090000 0xc00>,
<0xee080000 0x1100>;
clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 703>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
bus-range = <0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee080000 0xee080000 0 0x00010000>;
dma-ranges = <0x42000000 0 0x40000000 0x40000000 0 0x40000000>;
interrupt-map-mask = <0xf800 0 0 0x7>;
interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x800 0 0 0 0>;
phys = <&usb0 0>;
phy-names = "usb";
};
usb@2,0 {
reg = <0x1000 0 0 0 0>;
phys = <&usb0 0>;
phy-names = "usb";
};
};