blob: 563b3dfeb9b90b675ac3dc3b893c3c0f79ddc423 [file] [log] [blame]
/*
* Copyright © 2014 Broadcom
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
/**
* DOC: Interrupt management for the V3D engine
*
* We have an interrupt status register (V3D_INTCTL) which reports
* interrupts, and where writing 1 bits clears those interrupts.
* There are also a pair of interrupt registers
* (V3D_INTENA/V3D_INTDIS) where writing a 1 to their bits enables or
* disables that specific interrupt, and 0s written are ignored
* (reading either one returns the set of enabled interrupts).
*
* When we take a binning flush done interrupt, we need to submit the
* next frame for binning and move the finished frame to the render
* thread.
*
* When we take a render frame interrupt, we need to wake the
* processes waiting for some frame to be done, and get the next frame
* submitted ASAP (so the hardware doesn't sit idle when there's work
* to do).
*
* When we take the binner out of memory interrupt, we need to
* allocate some new memory and pass it to the binner so that the
* current job can make progress.
*/
#include <linux/platform_device.h>
#include <drm/drm_drv.h>
#include "vc4_drv.h"
#include "vc4_regs.h"
#include "vc4_trace.h"
#define V3D_DRIVER_IRQS (V3D_INT_OUTOMEM | \
V3D_INT_FLDONE | \
V3D_INT_FRDONE)
static void
vc4_overflow_mem_work(struct work_struct *work)
{
struct vc4_dev *vc4 =
container_of(work, struct vc4_dev, overflow_mem_work);
struct vc4_bo *bo;
int bin_bo_slot;
struct vc4_exec_info *exec;
unsigned long irqflags;
mutex_lock(&vc4->bin_bo_lock);
if (!vc4->bin_bo)
goto complete;
bo = vc4->bin_bo;
bin_bo_slot = vc4_v3d_get_bin_slot(vc4);
if (bin_bo_slot < 0) {
DRM_ERROR("Couldn't allocate binner overflow mem\n");
goto complete;
}
spin_lock_irqsave(&vc4->job_lock, irqflags);
if (vc4->bin_alloc_overflow) {
/* If we had overflow memory allocated previously,
* then that chunk will free when the current bin job
* is done. If we don't have a bin job running, then
* the chunk will be done whenever the list of render
* jobs has drained.
*/
exec = vc4_first_bin_job(vc4);
if (!exec)
exec = vc4_last_render_job(vc4);
if (exec) {
exec->bin_slots |= vc4->bin_alloc_overflow;
} else {
/* There's nothing queued in the hardware, so
* the old slot is free immediately.
*/
vc4->bin_alloc_used &= ~vc4->bin_alloc_overflow;
}
}
vc4->bin_alloc_overflow = BIT(bin_bo_slot);
V3D_WRITE(V3D_BPOA, bo->base.dma_addr + bin_bo_slot * vc4->bin_alloc_size);
V3D_WRITE(V3D_BPOS, bo->base.base.size);
V3D_WRITE(V3D_INTCTL, V3D_INT_OUTOMEM);
V3D_WRITE(V3D_INTENA, V3D_INT_OUTOMEM);
spin_unlock_irqrestore(&vc4->job_lock, irqflags);
complete:
mutex_unlock(&vc4->bin_bo_lock);
}
static void
vc4_irq_finish_bin_job(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
struct vc4_exec_info *next, *exec = vc4_first_bin_job(vc4);
if (!exec)
return;
trace_vc4_bcl_end_irq(dev, exec->seqno);
vc4_move_job_to_render(dev, exec);
next = vc4_first_bin_job(vc4);
/* Only submit the next job in the bin list if it matches the perfmon
* attached to the one that just finished (or if both jobs don't have
* perfmon attached to them).
*/
if (next && next->perfmon == exec->perfmon)
vc4_submit_next_bin_job(dev);
}
static void
vc4_cancel_bin_job(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
struct vc4_exec_info *exec = vc4_first_bin_job(vc4);
if (!exec)
return;
/* Stop the perfmon so that the next bin job can be started. */
if (exec->perfmon)
vc4_perfmon_stop(vc4, exec->perfmon, false);
list_move_tail(&exec->head, &vc4->bin_job_list);
vc4_submit_next_bin_job(dev);
}
static void
vc4_irq_finish_render_job(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
struct vc4_exec_info *exec = vc4_first_render_job(vc4);
struct vc4_exec_info *nextbin, *nextrender;
if (!exec)
return;
trace_vc4_rcl_end_irq(dev, exec->seqno);
vc4->finished_seqno++;
list_move_tail(&exec->head, &vc4->job_done_list);
nextbin = vc4_first_bin_job(vc4);
nextrender = vc4_first_render_job(vc4);
/* Only stop the perfmon if following jobs in the queue don't expect it
* to be enabled.
*/
if (exec->perfmon && !nextrender &&
(!nextbin || nextbin->perfmon != exec->perfmon))
vc4_perfmon_stop(vc4, exec->perfmon, true);
/* If there's a render job waiting, start it. If this is not the case
* we may have to unblock the binner if it's been stalled because of
* perfmon (this can be checked by comparing the perfmon attached to
* the finished renderjob to the one attached to the next bin job: if
* they don't match, this means the binner is stalled and should be
* restarted).
*/
if (nextrender)
vc4_submit_next_render_job(dev);
else if (nextbin && nextbin->perfmon != exec->perfmon)
vc4_submit_next_bin_job(dev);
if (exec->fence) {
dma_fence_signal_locked(exec->fence);
dma_fence_put(exec->fence);
exec->fence = NULL;
}
wake_up_all(&vc4->job_wait_queue);
schedule_work(&vc4->job_done_work);
}
static irqreturn_t
vc4_irq(int irq, void *arg)
{
struct drm_device *dev = arg;
struct vc4_dev *vc4 = to_vc4_dev(dev);
uint32_t intctl;
irqreturn_t status = IRQ_NONE;
barrier();
intctl = V3D_READ(V3D_INTCTL);
/* Acknowledge the interrupts we're handling here. The binner
* last flush / render frame done interrupt will be cleared,
* while OUTOMEM will stay high until the underlying cause is
* cleared.
*/
V3D_WRITE(V3D_INTCTL, intctl);
if (intctl & V3D_INT_OUTOMEM) {
/* Disable OUTOMEM until the work is done. */
V3D_WRITE(V3D_INTDIS, V3D_INT_OUTOMEM);
schedule_work(&vc4->overflow_mem_work);
status = IRQ_HANDLED;
}
if (intctl & V3D_INT_FLDONE) {
spin_lock(&vc4->job_lock);
vc4_irq_finish_bin_job(dev);
spin_unlock(&vc4->job_lock);
status = IRQ_HANDLED;
}
if (intctl & V3D_INT_FRDONE) {
spin_lock(&vc4->job_lock);
vc4_irq_finish_render_job(dev);
spin_unlock(&vc4->job_lock);
status = IRQ_HANDLED;
}
return status;
}
static void
vc4_irq_prepare(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
if (!vc4->v3d)
return;
init_waitqueue_head(&vc4->job_wait_queue);
INIT_WORK(&vc4->overflow_mem_work, vc4_overflow_mem_work);
/* Clear any pending interrupts someone might have left around
* for us.
*/
V3D_WRITE(V3D_INTCTL, V3D_DRIVER_IRQS);
}
void
vc4_irq_enable(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
if (WARN_ON_ONCE(vc4->is_vc5))
return;
if (!vc4->v3d)
return;
/* Enable the render done interrupts. The out-of-memory interrupt is
* enabled as soon as we have a binner BO allocated.
*/
V3D_WRITE(V3D_INTENA, V3D_INT_FLDONE | V3D_INT_FRDONE);
}
void
vc4_irq_disable(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
if (WARN_ON_ONCE(vc4->is_vc5))
return;
if (!vc4->v3d)
return;
/* Disable sending interrupts for our driver's IRQs. */
V3D_WRITE(V3D_INTDIS, V3D_DRIVER_IRQS);
/* Clear any pending interrupts we might have left. */
V3D_WRITE(V3D_INTCTL, V3D_DRIVER_IRQS);
/* Finish any interrupt handler still in flight. */
synchronize_irq(vc4->irq);
cancel_work_sync(&vc4->overflow_mem_work);
}
int vc4_irq_install(struct drm_device *dev, int irq)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
int ret;
if (WARN_ON_ONCE(vc4->is_vc5))
return -ENODEV;
if (irq == IRQ_NOTCONNECTED)
return -ENOTCONN;
vc4_irq_prepare(dev);
ret = request_irq(irq, vc4_irq, 0, dev->driver->name, dev);
if (ret)
return ret;
vc4_irq_enable(dev);
return 0;
}
void vc4_irq_uninstall(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
if (WARN_ON_ONCE(vc4->is_vc5))
return;
vc4_irq_disable(dev);
free_irq(vc4->irq, dev);
}
/** Reinitializes interrupt registers when a GPU reset is performed. */
void vc4_irq_reset(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
unsigned long irqflags;
if (WARN_ON_ONCE(vc4->is_vc5))
return;
/* Acknowledge any stale IRQs. */
V3D_WRITE(V3D_INTCTL, V3D_DRIVER_IRQS);
/*
* Turn all our interrupts on. Binner out of memory is the
* only one we expect to trigger at this point, since we've
* just come from poweron and haven't supplied any overflow
* memory yet.
*/
V3D_WRITE(V3D_INTENA, V3D_DRIVER_IRQS);
spin_lock_irqsave(&vc4->job_lock, irqflags);
vc4_cancel_bin_job(dev);
vc4_irq_finish_render_job(dev);
spin_unlock_irqrestore(&vc4->job_lock, irqflags);
}