blob: 760501c1301a6216fc22c48b388c4e69aa966a18 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,dispcc-sm8250.h>
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sm8250.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/clock/qcom,camcc-sm8250.h>
#include <dt-bindings/clock/qcom,videocc-sm8250.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
i2c7 = &i2c7;
i2c8 = &i2c8;
i2c9 = &i2c9;
i2c10 = &i2c10;
i2c11 = &i2c11;
i2c12 = &i2c12;
i2c13 = &i2c13;
i2c14 = &i2c14;
i2c15 = &i2c15;
i2c16 = &i2c16;
i2c17 = &i2c17;
i2c18 = &i2c18;
i2c19 = &i2c19;
spi0 = &spi0;
spi1 = &spi1;
spi2 = &spi2;
spi3 = &spi3;
spi4 = &spi4;
spi5 = &spi5;
spi6 = &spi6;
spi7 = &spi7;
spi8 = &spi8;
spi9 = &spi9;
spi10 = &spi10;
spi11 = &spi11;
spi12 = &spi12;
spi13 = &spi13;
spi14 = &spi14;
spi15 = &spi15;
spi16 = &spi16;
spi17 = &spi17;
spi18 = &spi18;
spi19 = &spi19;
};
chosen { };
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <38400000>;
clock-output-names = "xo_board";
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
clock-frequency = <32768>;
#clock-cells = <0>;
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x0>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <448>;
dynamic-power-coefficient = <105>;
next-level-cache = <&L2_0>;
power-domains = <&CPU_PD0>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-size = <0x20000>;
cache-unified;
next-level-cache = <&L3_0>;
L3_0: l3-cache {
compatible = "cache";
cache-level = <3>;
cache-size = <0x400000>;
cache-unified;
};
};
};
CPU1: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x100>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <448>;
dynamic-power-coefficient = <105>;
next-level-cache = <&L2_100>;
power-domains = <&CPU_PD1>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-size = <0x20000>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU2: cpu@200 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x200>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <448>;
dynamic-power-coefficient = <105>;
next-level-cache = <&L2_200>;
power-domains = <&CPU_PD2>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-size = <0x20000>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU3: cpu@300 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x300>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <448>;
dynamic-power-coefficient = <105>;
next-level-cache = <&L2_300>;
power-domains = <&CPU_PD3>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-size = <0x20000>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU4: cpu@400 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x400>;
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <379>;
next-level-cache = <&L2_400>;
power-domains = <&CPU_PD4>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-size = <0x40000>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU5: cpu@500 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x500>;
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <379>;
next-level-cache = <&L2_500>;
power-domains = <&CPU_PD5>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-size = <0x40000>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU6: cpu@600 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x600>;
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <379>;
next-level-cache = <&L2_600>;
power-domains = <&CPU_PD6>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-size = <0x40000>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU7: cpu@700 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x700>;
clocks = <&cpufreq_hw 2>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <444>;
next-level-cache = <&L2_700>;
power-domains = <&CPU_PD7>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 2>;
operating-points-v2 = <&cpu7_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-size = <0x80000>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
core4 {
cpu = <&CPU4>;
};
core5 {
cpu = <&CPU5>;
};
core6 {
cpu = <&CPU6>;
};
core7 {
cpu = <&CPU7>;
};
};
};
idle-states {
entry-method = "psci";
LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
compatible = "arm,idle-state";
idle-state-name = "silver-rail-power-collapse";
arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <360>;
exit-latency-us = <531>;
min-residency-us = <3934>;
local-timer-stop;
};
BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
compatible = "arm,idle-state";
idle-state-name = "gold-rail-power-collapse";
arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <702>;
exit-latency-us = <1061>;
min-residency-us = <4488>;
local-timer-stop;
};
};
domain-idle-states {
CLUSTER_SLEEP_0: cluster-sleep-0 {
compatible = "domain-idle-state";
arm,psci-suspend-param = <0x4100c244>;
entry-latency-us = <3264>;
exit-latency-us = <6562>;
min-residency-us = <9987>;
};
};
};
qup_virt: interconnect-qup-virt {
compatible = "qcom,sm8250-qup-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
cpu0_opp_table: opp-table-cpu0 {
compatible = "operating-points-v2";
opp-shared;
cpu0_opp1: opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-peak-kBps = <800000 9600000>;
};
cpu0_opp2: opp-403200000 {
opp-hz = /bits/ 64 <403200000>;
opp-peak-kBps = <800000 9600000>;
};
cpu0_opp3: opp-518400000 {
opp-hz = /bits/ 64 <518400000>;
opp-peak-kBps = <800000 16588800>;
};
cpu0_opp4: opp-614400000 {
opp-hz = /bits/ 64 <614400000>;
opp-peak-kBps = <800000 16588800>;
};
cpu0_opp5: opp-691200000 {
opp-hz = /bits/ 64 <691200000>;
opp-peak-kBps = <800000 19660800>;
};
cpu0_opp6: opp-787200000 {
opp-hz = /bits/ 64 <787200000>;
opp-peak-kBps = <1804000 19660800>;
};
cpu0_opp7: opp-883200000 {
opp-hz = /bits/ 64 <883200000>;
opp-peak-kBps = <1804000 23347200>;
};
cpu0_opp8: opp-979200000 {
opp-hz = /bits/ 64 <979200000>;
opp-peak-kBps = <1804000 26419200>;
};
cpu0_opp9: opp-1075200000 {
opp-hz = /bits/ 64 <1075200000>;
opp-peak-kBps = <1804000 29491200>;
};
cpu0_opp10: opp-1171200000 {
opp-hz = /bits/ 64 <1171200000>;
opp-peak-kBps = <1804000 32563200>;
};
cpu0_opp11: opp-1248000000 {
opp-hz = /bits/ 64 <1248000000>;
opp-peak-kBps = <1804000 36249600>;
};
cpu0_opp12: opp-1344000000 {
opp-hz = /bits/ 64 <1344000000>;
opp-peak-kBps = <2188000 36249600>;
};
cpu0_opp13: opp-1420800000 {
opp-hz = /bits/ 64 <1420800000>;
opp-peak-kBps = <2188000 39321600>;
};
cpu0_opp14: opp-1516800000 {
opp-hz = /bits/ 64 <1516800000>;
opp-peak-kBps = <3072000 42393600>;
};
cpu0_opp15: opp-1612800000 {
opp-hz = /bits/ 64 <1612800000>;
opp-peak-kBps = <3072000 42393600>;
};
cpu0_opp16: opp-1708800000 {
opp-hz = /bits/ 64 <1708800000>;
opp-peak-kBps = <4068000 42393600>;
};
cpu0_opp17: opp-1804800000 {
opp-hz = /bits/ 64 <1804800000>;
opp-peak-kBps = <4068000 42393600>;
};
};
cpu4_opp_table: opp-table-cpu4 {
compatible = "operating-points-v2";
opp-shared;
cpu4_opp1: opp-710400000 {
opp-hz = /bits/ 64 <710400000>;
opp-peak-kBps = <1804000 19660800>;
};
cpu4_opp2: opp-825600000 {
opp-hz = /bits/ 64 <825600000>;
opp-peak-kBps = <2188000 23347200>;
};
cpu4_opp3: opp-940800000 {
opp-hz = /bits/ 64 <940800000>;
opp-peak-kBps = <2188000 26419200>;
};
cpu4_opp4: opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-peak-kBps = <3072000 26419200>;
};
cpu4_opp5: opp-1171200000 {
opp-hz = /bits/ 64 <1171200000>;
opp-peak-kBps = <3072000 29491200>;
};
cpu4_opp6: opp-1286400000 {
opp-hz = /bits/ 64 <1286400000>;
opp-peak-kBps = <4068000 29491200>;
};
cpu4_opp7: opp-1382400000 {
opp-hz = /bits/ 64 <1382400000>;
opp-peak-kBps = <4068000 32563200>;
};
cpu4_opp8: opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
opp-peak-kBps = <4068000 32563200>;
};
cpu4_opp9: opp-1574400000 {
opp-hz = /bits/ 64 <1574400000>;
opp-peak-kBps = <5412000 39321600>;
};
cpu4_opp10: opp-1670400000 {
opp-hz = /bits/ 64 <1670400000>;
opp-peak-kBps = <5412000 42393600>;
};
cpu4_opp11: opp-1766400000 {
opp-hz = /bits/ 64 <1766400000>;
opp-peak-kBps = <5412000 45465600>;
};
cpu4_opp12: opp-1862400000 {
opp-hz = /bits/ 64 <1862400000>;
opp-peak-kBps = <6220000 45465600>;
};
cpu4_opp13: opp-1958400000 {
opp-hz = /bits/ 64 <1958400000>;
opp-peak-kBps = <6220000 48537600>;
};
cpu4_opp14: opp-2054400000 {
opp-hz = /bits/ 64 <2054400000>;
opp-peak-kBps = <7216000 48537600>;
};
cpu4_opp15: opp-2150400000 {
opp-hz = /bits/ 64 <2150400000>;
opp-peak-kBps = <7216000 51609600>;
};
cpu4_opp16: opp-2246400000 {
opp-hz = /bits/ 64 <2246400000>;
opp-peak-kBps = <7216000 51609600>;
};
cpu4_opp17: opp-2342400000 {
opp-hz = /bits/ 64 <2342400000>;
opp-peak-kBps = <8368000 51609600>;
};
cpu4_opp18: opp-2419200000 {
opp-hz = /bits/ 64 <2419200000>;
opp-peak-kBps = <8368000 51609600>;
};
};
cpu7_opp_table: opp-table-cpu7 {
compatible = "operating-points-v2";
opp-shared;
cpu7_opp1: opp-844800000 {
opp-hz = /bits/ 64 <844800000>;
opp-peak-kBps = <2188000 19660800>;
};
cpu7_opp2: opp-960000000 {
opp-hz = /bits/ 64 <960000000>;
opp-peak-kBps = <2188000 26419200>;
};
cpu7_opp3: opp-1075200000 {
opp-hz = /bits/ 64 <1075200000>;
opp-peak-kBps = <3072000 26419200>;
};
cpu7_opp4: opp-1190400000 {
opp-hz = /bits/ 64 <1190400000>;
opp-peak-kBps = <3072000 29491200>;
};
cpu7_opp5: opp-1305600000 {
opp-hz = /bits/ 64 <1305600000>;
opp-peak-kBps = <4068000 32563200>;
};
cpu7_opp6: opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
opp-peak-kBps = <4068000 32563200>;
};
cpu7_opp7: opp-1516800000 {
opp-hz = /bits/ 64 <1516800000>;
opp-peak-kBps = <4068000 36249600>;
};
cpu7_opp8: opp-1632000000 {
opp-hz = /bits/ 64 <1632000000>;
opp-peak-kBps = <5412000 39321600>;
};
cpu7_opp9: opp-1747200000 {
opp-hz = /bits/ 64 <1708800000>;
opp-peak-kBps = <5412000 42393600>;
};
cpu7_opp10: opp-1862400000 {
opp-hz = /bits/ 64 <1862400000>;
opp-peak-kBps = <6220000 45465600>;
};
cpu7_opp11: opp-1977600000 {
opp-hz = /bits/ 64 <1977600000>;
opp-peak-kBps = <6220000 48537600>;
};
cpu7_opp12: opp-2073600000 {
opp-hz = /bits/ 64 <2073600000>;
opp-peak-kBps = <7216000 48537600>;
};
cpu7_opp13: opp-2169600000 {
opp-hz = /bits/ 64 <2169600000>;
opp-peak-kBps = <7216000 51609600>;
};
cpu7_opp14: opp-2265600000 {
opp-hz = /bits/ 64 <2265600000>;
opp-peak-kBps = <7216000 51609600>;
};
cpu7_opp15: opp-2361600000 {
opp-hz = /bits/ 64 <2361600000>;
opp-peak-kBps = <8368000 51609600>;
};
cpu7_opp16: opp-2457600000 {
opp-hz = /bits/ 64 <2457600000>;
opp-peak-kBps = <8368000 51609600>;
};
cpu7_opp17: opp-2553600000 {
opp-hz = /bits/ 64 <2553600000>;
opp-peak-kBps = <8368000 51609600>;
};
cpu7_opp18: opp-2649600000 {
opp-hz = /bits/ 64 <2649600000>;
opp-peak-kBps = <8368000 51609600>;
};
cpu7_opp19: opp-2745600000 {
opp-hz = /bits/ 64 <2745600000>;
opp-peak-kBps = <8368000 51609600>;
};
cpu7_opp20: opp-2841600000 {
opp-hz = /bits/ 64 <2841600000>;
opp-peak-kBps = <8368000 51609600>;
};
};
firmware {
scm: scm {
compatible = "qcom,scm-sm8250", "qcom,scm";
qcom,dload-mode = <&tcsr 0x13000>;
#reset-cells = <1>;
};
};
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
reg = <0x0 0x80000000 0x0 0x0>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
CPU_PD0: power-domain-cpu0 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
};
CPU_PD1: power-domain-cpu1 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
};
CPU_PD2: power-domain-cpu2 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
};
CPU_PD3: power-domain-cpu3 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
};
CPU_PD4: power-domain-cpu4 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
CPU_PD5: power-domain-cpu5 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
CPU_PD6: power-domain-cpu6 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
CPU_PD7: power-domain-cpu7 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
CLUSTER_PD: power-domain-cpu-cluster0 {
#power-domain-cells = <0>;
domain-idle-states = <&CLUSTER_SLEEP_0>;
};
};
qup_opp_table: opp-table-qup {
compatible = "operating-points-v2";
opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-75000000 {
opp-hz = /bits/ 64 <75000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-120000000 {
opp-hz = /bits/ 64 <120000000>;
required-opps = <&rpmhpd_opp_svs>;
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
hyp_mem: memory@80000000 {
reg = <0x0 0x80000000 0x0 0x600000>;
no-map;
};
xbl_aop_mem: memory@80700000 {
reg = <0x0 0x80700000 0x0 0x160000>;
no-map;
};
cmd_db: memory@80860000 {
compatible = "qcom,cmd-db";
reg = <0x0 0x80860000 0x0 0x20000>;
no-map;
};
smem_mem: memory@80900000 {
reg = <0x0 0x80900000 0x0 0x200000>;
no-map;
};
removed_mem: memory@80b00000 {
reg = <0x0 0x80b00000 0x0 0x5300000>;
no-map;
};
camera_mem: memory@86200000 {
reg = <0x0 0x86200000 0x0 0x500000>;
no-map;
};
wlan_mem: memory@86700000 {
reg = <0x0 0x86700000 0x0 0x100000>;
no-map;
};
ipa_fw_mem: memory@86800000 {
reg = <0x0 0x86800000 0x0 0x10000>;
no-map;
};
ipa_gsi_mem: memory@86810000 {
reg = <0x0 0x86810000 0x0 0xa000>;
no-map;
};
gpu_mem: memory@8681a000 {
reg = <0x0 0x8681a000 0x0 0x2000>;
no-map;
};
npu_mem: memory@86900000 {
reg = <0x0 0x86900000 0x0 0x500000>;
no-map;
};
video_mem: memory@86e00000 {
reg = <0x0 0x86e00000 0x0 0x500000>;
no-map;
};
cvp_mem: memory@87300000 {
reg = <0x0 0x87300000 0x0 0x500000>;
no-map;
};
cdsp_mem: memory@87800000 {
reg = <0x0 0x87800000 0x0 0x1400000>;
no-map;
};
slpi_mem: memory@88c00000 {
reg = <0x0 0x88c00000 0x0 0x1500000>;
no-map;
};
adsp_mem: memory@8a100000 {
reg = <0x0 0x8a100000 0x0 0x1d00000>;
no-map;
};
spss_mem: memory@8be00000 {
reg = <0x0 0x8be00000 0x0 0x100000>;
no-map;
};
cdsp_secure_heap: memory@8bf00000 {
reg = <0x0 0x8bf00000 0x0 0x4600000>;
no-map;
};
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
};
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
IPCC_MPROC_SIGNAL_SMP2P
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_LPASS
IPCC_MPROC_SIGNAL_SMP2P>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
smp2p_adsp_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
smp2p_adsp_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-cdsp {
compatible = "qcom,smp2p";
qcom,smem = <94>, <432>;
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_SMP2P
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_SMP2P>;
qcom,local-pid = <0>;
qcom,remote-pid = <5>;
smp2p_cdsp_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
smp2p_cdsp_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-slpi {
compatible = "qcom,smp2p";
qcom,smem = <481>, <430>;
interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
IPCC_MPROC_SIGNAL_SMP2P
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_SLPI
IPCC_MPROC_SIGNAL_SMP2P>;
qcom,local-pid = <0>;
qcom,remote-pid = <3>;
smp2p_slpi_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
smp2p_slpi_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0 0 0 0x10 0>;
dma-ranges = <0 0 0 0 0x10 0>;
compatible = "simple-bus";
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sm8250";
reg = <0x0 0x00100000 0x0 0x1f0000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
clock-names = "bi_tcxo",
"bi_tcxo_ao",
"sleep_clk";
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
};
ipcc: mailbox@408000 {
compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
reg = <0 0x00408000 0 0x1000>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
#mbox-cells = <2>;
};
qfprom: efuse@784000 {
compatible = "qcom,sm8250-qfprom", "qcom,qfprom";
reg = <0 0x00784000 0 0x8ff>;
#address-cells = <1>;
#size-cells = <1>;
gpu_speed_bin: gpu_speed_bin@19b {
reg = <0x19b 0x1>;
bits = <5 3>;
};
};
rng: rng@793000 {
compatible = "qcom,prng-ee";
reg = <0 0x00793000 0 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
gpi_dma2: dma-controller@800000 {
compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
reg = <0 0x00800000 0 0x70000>;
interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <10>;
dma-channel-mask = <0x3f>;
iommus = <&apps_smmu 0x76 0x0>;
#dma-cells = <3>;
status = "disabled";
};
qupv3_id_2: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
#address-cells = <2>;
#size-cells = <2>;
iommus = <&apps_smmu 0x63 0x0>;
ranges;
status = "disabled";
i2c14: i2c@880000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c14_default>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
<&gpi_dma2 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi14: spi@880000 {
compatible = "qcom,geni-spi";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
<&gpi_dma2 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c15: i2c@884000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c15_default>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
<&gpi_dma2 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi15: spi@884000 {
compatible = "qcom,geni-spi";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
<&gpi_dma2 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c16: i2c@888000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c16_default>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
<&gpi_dma2 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi16: spi@888000 {
compatible = "qcom,geni-spi";
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
<&gpi_dma2 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c17: i2c@88c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c17_default>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
<&gpi_dma2 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi17: spi@88c000 {
compatible = "qcom,geni-spi";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
<&gpi_dma2 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart17: serial@88c000 {
compatible = "qcom,geni-uart";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart17_default>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core",
"qup-config";
status = "disabled";
};
i2c18: i2c@890000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c18_default>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
<&gpi_dma2 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi18: spi@890000 {
compatible = "qcom,geni-spi";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
<&gpi_dma2 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart18: serial@890000 {
compatible = "qcom,geni-uart";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart18_default>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core",
"qup-config";
status = "disabled";
};
i2c19: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c19_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
<&gpi_dma2 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi19: spi@894000 {
compatible = "qcom,geni-spi";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
<&gpi_dma2 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
gpi_dma0: dma-controller@900000 {
compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
reg = <0 0x00900000 0 0x70000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <15>;
dma-channel-mask = <0x7ff>;
iommus = <&apps_smmu 0x5b6 0x0>;
#dma-cells = <3>;
status = "disabled";
};
qupv3_id_0: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x009c0000 0x0 0x6000>;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
#address-cells = <2>;
#size-cells = <2>;
iommus = <&apps_smmu 0x5a3 0x0>;
ranges;
status = "disabled";
i2c0: i2c@980000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00980000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi0: spi@980000 {
compatible = "qcom,geni-spi";
reg = <0 0x00980000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
<&gpi_dma0 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@984000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00984000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@984000 {
compatible = "qcom,geni-spi";
reg = <0 0x00984000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
<&gpi_dma0 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@988000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00988000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi2: spi@988000 {
compatible = "qcom,geni-spi";
reg = <0 0x00988000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart2: serial@988000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x00988000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core",
"qup-config";
status = "disabled";
};
i2c3: i2c@98c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0098c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi3: spi@98c000 {
compatible = "qcom,geni-spi";
reg = <0 0x0098c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
<&gpi_dma0 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c4: i2c@990000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00990000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi4: spi@990000 {
compatible = "qcom,geni-spi";
reg = <0 0x00990000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
<&gpi_dma0 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c5: i2c@994000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00994000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi5: spi@994000 {
compatible = "qcom,geni-spi";
reg = <0 0x00994000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
<&gpi_dma0 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c6: i2c@998000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00998000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
<&gpi_dma0 1 6 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi6: spi@998000 {
compatible = "qcom,geni-spi";
reg = <0 0x00998000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
<&gpi_dma0 1 6 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart6: serial@998000 {
compatible = "qcom,geni-uart";
reg = <0 0x00998000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core",
"qup-config";
status = "disabled";
};
i2c7: i2c@99c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0099c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
<&gpi_dma0 1 7 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi7: spi@99c000 {
compatible = "qcom,geni-spi";
reg = <0 0x0099c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
<&gpi_dma0 1 7 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
gpi_dma1: dma-controller@a00000 {
compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
reg = <0 0x00a00000 0 0x70000>;
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <10>;
dma-channel-mask = <0x3f>;
iommus = <&apps_smmu 0x56 0x0>;
#dma-cells = <3>;
status = "disabled";
};
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
#address-cells = <2>;
#size-cells = <2>;
iommus = <&apps_smmu 0x43 0x0>;
ranges;
status = "disabled";
i2c8: i2c@a80000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
<&gpi_dma1 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi8: spi@a80000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
<&gpi_dma1 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c9: i2c@a84000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
<&gpi_dma1 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi9: spi@a84000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
<&gpi_dma1 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c10: i2c@a88000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
<&gpi_dma1 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi10: spi@a88000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
<&gpi_dma1 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c11: i2c@a8c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
<&gpi_dma1 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi11: spi@a8c000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
<&gpi_dma1 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c12: i2c@a90000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
<&gpi_dma1 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi12: spi@a90000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
<&gpi_dma1 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart12: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core",
"qup-config";
status = "disabled";
};
i2c13: i2c@a94000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c13_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
<&gpi_dma1 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi13: spi@a94000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
<&gpi_dma1 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core",
"qup-config",
"qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
config_noc: interconnect@1500000 {
compatible = "qcom,sm8250-config-noc";
reg = <0 0x01500000 0 0xa580>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1620000 {
compatible = "qcom,sm8250-system-noc";
reg = <0 0x01620000 0 0x1c200>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mc_virt: interconnect@163d000 {
compatible = "qcom,sm8250-mc-virt";
reg = <0 0x0163d000 0 0x1000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sm8250-aggre1-noc";
reg = <0 0x016e0000 0 0x1f180>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre2_noc: interconnect@1700000 {
compatible = "qcom,sm8250-aggre2-noc";
reg = <0 0x01700000 0 0x33000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
compute_noc: interconnect@1733000 {
compatible = "qcom,sm8250-compute-noc";
reg = <0 0x01733000 0 0xa180>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sm8250-mmss-noc";
reg = <0 0x01740000 0 0x1f080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
pcie0: pcie@1c00000 {
compatible = "qcom,pcie-sm8250";
reg = <0 0x01c00000 0 0x3000>,
<0 0x60000000 0 0xf1d>,
<0 0x60000f20 0 0xa8>,
<0 0x60001000 0 0x1000>,
<0 0x60100000 0 0x100000>,
<0 0x01c03000 0 0x1000>;
reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
<0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0", "msi1", "msi2", "msi3",
"msi4", "msi5", "msi6", "msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
<&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
<&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a",
"tbu",
"ddrss_sf_tbu";
iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
<0x100 &apps_smmu 0x1c01 0x1>;
resets = <&gcc GCC_PCIE_0_BCR>;
reset-names = "pci";
power-domains = <&gcc PCIE_0_GDSC>;
phys = <&pcie0_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie0_default_state>;
dma-coherent;
status = "disabled";
};
pcie0_phy: phy@1c06000 {
compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
reg = <0 0x01c06000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_WIFI_CLKREF_EN>,
<&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
<&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"refgen",
"pipe";
clock-output-names = "pcie_0_pipe_clk";
#clock-cells = <0>;
#phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
assigned-clock-rates = <100000000>;
status = "disabled";
};
pcie1: pcie@1c08000 {
compatible = "qcom,pcie-sm8250";
reg = <0 0x01c08000 0 0x3000>,
<0 0x40000000 0 0xf1d>,
<0 0x40000f20 0 0xa8>,
<0 0x40001000 0 0x1000>,
<0 0x40100000 0 0x100000>,
<0 0x01c0b000 0 0x1000>;
reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
device_type = "pci";
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
num-lanes = <2>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
<&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
<&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
<&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a",
"ref",
"tbu",
"ddrss_sf_tbu";
assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
assigned-clock-rates = <19200000>;
iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
<0x100 &apps_smmu 0x1c81 0x1>;
resets = <&gcc GCC_PCIE_1_BCR>;
reset-names = "pci";
power-domains = <&gcc PCIE_1_GDSC>;
phys = <&pcie1_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie1_default_state>;
dma-coherent;
status = "disabled";
};
pcie1_phy: phy@1c0e000 {
compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
reg = <0 0x01c0e000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
<&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"refgen",
"pipe";
clock-output-names = "pcie_1_pipe_clk";
#clock-cells = <0>;
#phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
assigned-clock-rates = <100000000>;
status = "disabled";
};
pcie2: pcie@1c10000 {
compatible = "qcom,pcie-sm8250";
reg = <0 0x01c10000 0 0x3000>,
<0 0x64000000 0 0xf1d>,
<0 0x64000f20 0 0xa8>,
<0 0x64001000 0 0x1000>,
<0 0x64100000 0 0x100000>,
<0 0x01c13000 0 0x1000>;
reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
device_type = "pci";
linux,pci-domain = <2>;
bus-range = <0x00 0xff>;
num-lanes = <2>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>,
<0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
<&gcc GCC_PCIE_2_AUX_CLK>,
<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_2_SLV_AXI_CLK>,
<&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
<&gcc GCC_PCIE_MDM_CLKREF_EN>,
<&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
<&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a",
"ref",
"tbu",
"ddrss_sf_tbu";
assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
assigned-clock-rates = <19200000>;
iommu-map = <0x0 &apps_smmu 0x1d00 0x1>,
<0x100 &apps_smmu 0x1d01 0x1>;
resets = <&gcc GCC_PCIE_2_BCR>;
reset-names = "pci";
power-domains = <&gcc PCIE_2_GDSC>;
phys = <&pcie2_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie2_default_state>;
dma-coherent;
status = "disabled";
};
pcie2_phy: phy@1c16000 {
compatible = "qcom,sm8250-qmp-modem-pcie-phy";
reg = <0 0x01c16000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
<&gcc GCC_PCIE_MDM_CLKREF_EN>,
<&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
<&gcc GCC_PCIE_2_PIPE_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"refgen",
"pipe";
clock-output-names = "pcie_2_pipe_clk";
#clock-cells = <0>;
#phy-cells = <0>;
resets = <&gcc GCC_PCIE_2_PHY_BCR>;
reset-names = "phy";
assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
assigned-clock-rates = <100000000>;
status = "disabled";
};
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
reg = <0 0x01d84000 0 0x3000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
resets = <&gcc GCC_UFS_PHY_BCR>;
reset-names = "rst";
power-domains = <&gcc UFS_PHY_GDSC>;
iommus = <&apps_smmu 0x0e0 0>, <&apps_smmu 0x4e0 0>;
clock-names =
"core_clk",
"bus_aggr_clk",
"iface_clk",
"core_clk_unipro",
"ref_clk",
"tx_lane0_sync_clk",
"rx_lane0_sync_clk",
"rx_lane1_sync_clk";
clocks =
<&gcc GCC_UFS_PHY_AXI_CLK>,
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
<&gcc GCC_UFS_PHY_AHB_CLK>,
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
operating-points-v2 = <&ufs_opp_table>;
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
interconnect-names = "ufs-ddr", "cpu-ufs";
status = "disabled";
ufs_opp_table: opp-table {
compatible = "operating-points-v2";
opp-37500000 {
opp-hz = /bits/ 64 <37500000>,
/bits/ 64 <0>,
/bits/ 64 <0>,
/bits/ 64 <37500000>,
/bits/ 64 <0>,
/bits/ 64 <0>,
/bits/ 64 <0>,
/bits/ 64 <0>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>,
/bits/ 64 <0>,
/bits/ 64 <0>,
/bits/ 64 <300000000>,
/bits/ 64 <0>,
/bits/ 64 <0>,
/bits/ 64 <0>,
/bits/ 64 <0>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sm8250-qmp-ufs-phy";
reg = <0 0x01d87000 0 0x1000>;
clock-names = "ref",
"ref_aux";
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
#phy-cells = <0>;
status = "disabled";
};
cryptobam: dma-controller@1dc4000 {
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
reg = <0 0x01dc4000 0 0x24000>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
num-channels = <8>;
qcom,num-ees = <2>;
iommus = <&apps_smmu 0x592 0x0000>,
<&apps_smmu 0x598 0x0000>,
<&apps_smmu 0x599 0x0000>,
<&apps_smmu 0x59f 0x0000>,
<&apps_smmu 0x586 0x0011>,
<&apps_smmu 0x596 0x0011>;
};
crypto: crypto@1dfa000 {
compatible = "qcom,sm8250-qce", "qcom,sm8150-qce", "qcom,qce";
reg = <0 0x01dfa000 0 0x6000>;
dmas = <&cryptobam 4>, <&cryptobam 5>;
dma-names = "rx", "tx";
iommus = <&apps_smmu 0x592 0x0000>,
<&apps_smmu 0x598 0x0000>,
<&apps_smmu 0x599 0x0000>,
<&apps_smmu 0x59f 0x0000>,
<&apps_smmu 0x586 0x0011>,
<&apps_smmu 0x596 0x0011>;
interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "memory";
};
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
#hwlock-cells = <1>;
};
tcsr: syscon@1fc0000 {
compatible = "qcom,sm8250-tcsr", "syscon";
reg = <0x0 0x1fc0000 0x0 0x30000>;
};
wsamacro: codec@3240000 {
compatible = "qcom,sm8250-lpass-wsa-macro";
reg = <0 0x03240000 0 0x1000>;
clocks = <&audiocc LPASS_CDC_WSA_MCLK>,
<&audiocc LPASS_CDC_WSA_NPL>,
<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&aoncc LPASS_CDC_VA_MCLK>,
<&vamacro>;
clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
#clock-cells = <0>;
clock-output-names = "mclk";
#sound-dai-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&wsa_swr_active>;
status = "disabled";
};
swr0: soundwire@3250000 {
reg = <0 0x03250000 0 0x2000>;
compatible = "qcom,soundwire-v1.5.1";
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&wsamacro>;
clock-names = "iface";
qcom,din-ports = <2>;
qcom,dout-ports = <6>;
qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
qcom,ports-block-pack-mode = /bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>;
#sound-dai-cells = <1>;
#address-cells = <2>;
#size-cells = <0>;
status = "disabled";
};
audiocc: clock-controller@3300000 {
compatible = "qcom,sm8250-lpass-audiocc";
reg = <0 0x03300000 0 0x30000>;
#clock-cells = <1>;
clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "core", "audio", "bus";
};
vamacro: codec@3370000 {
compatible = "qcom,sm8250-lpass-va-macro";
reg = <0 0x03370000 0 0x1000>;
clocks = <&aoncc LPASS_CDC_VA_MCLK>,
<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "mclk", "macro", "dcodec";
#clock-cells = <0>;
clock-output-names = "fsgen";
#sound-dai-cells = <1>;
};
rxmacro: rxmacro@3200000 {
pinctrl-names = "default";
pinctrl-0 = <&rx_swr_active>;
compatible = "qcom,sm8250-lpass-rx-macro";
reg = <0 0x03200000 0 0x1000>;
status = "disabled";
clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&vamacro>;
clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
#clock-cells = <0>;
clock-output-names = "mclk";
#sound-dai-cells = <1>;
};
swr1: soundwire@3210000 {
reg = <0 0x03210000 0 0x2000>;
compatible = "qcom,soundwire-v1.5.1";
status = "disabled";
interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rxmacro>;
clock-names = "iface";
label = "RX";
qcom,din-ports = <0>;
qcom,dout-ports = <5>;
qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
#sound-dai-cells = <1>;
#address-cells = <2>;
#size-cells = <0>;
};
txmacro: txmacro@3220000 {
pinctrl-names = "default";
pinctrl-0 = <&tx_swr_active>;
compatible = "qcom,sm8250-lpass-tx-macro";
reg = <0 0x03220000 0 0x1000>;
status = "disabled";
clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&vamacro>;
clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
#clock-cells = <0>;
clock-output-names = "mclk";
#sound-dai-cells = <1>;
};
/* tx macro */
swr2: soundwire@3230000 {
reg = <0 0x03230000 0 0x2000>;
compatible = "qcom,soundwire-v1.5.1";
interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "core";
status = "disabled";
clocks = <&txmacro>;
clock-names = "iface";
label = "TX";
qcom,din-ports = <5>;
qcom,dout-ports = <0>;
qcom,ports-sinterval-low = /bits/ 8 <0xff 0x01 0x01 0x03 0x03>;
qcom,ports-offset1 = /bits/ 8 <0xff 0x01 0x00 0x02 0x00>;
qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x00 0x00 0x00>;
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
qcom,ports-lane-control = /bits/ 8 <0xff 0x00 0x01 0x00 0x01>;
#sound-dai-cells = <1>;
#address-cells = <2>;
#size-cells = <0>;
};
aoncc: clock-controller@3380000 {
compatible = "qcom,sm8250-lpass-aoncc";
reg = <0 0x03380000 0 0x40000>;
#clock-cells = <1>;
clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "core", "audio", "bus";
};
lpass_tlmm: pinctrl@33c0000 {
compatible = "qcom,sm8250-lpass-lpi-pinctrl";
reg = <0 0x033c0000 0x0 0x20000>,
<0 0x03550000 0x0 0x10000>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&lpass_tlmm 0 0 14>;
clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "core", "audio";
wsa_swr_active: wsa-swr-active-state {
clk-pins {
pins = "gpio10";
function = "wsa_swr_clk";
drive-strength = <2>;
slew-rate = <1>;
bias-disable;
};
data-pins {
pins = "gpio11";
function = "wsa_swr_data";
drive-strength = <2>;
slew-rate = <1>;
bias-bus-hold;
};
};
wsa_swr_sleep: wsa-swr-sleep-state {
clk-pins {
pins = "gpio10";
function = "wsa_swr_clk";
drive-strength = <2>;
bias-pull-down;
};
data-pins {
pins = "gpio11";
function = "wsa_swr_data";
drive-strength = <2>;
bias-pull-down;
};
};
dmic01_active: dmic01-active-state {
clk-pins {
pins = "gpio6";
function = "dmic1_clk";
drive-strength = <8>;
output-high;
};
data-pins {
pins = "gpio7";
function = "dmic1_data";
drive-strength = <8>;
};
};
dmic01_sleep: dmic01-sleep-state {
clk-pins {
pins = "gpio6";
function = "dmic1_clk";
drive-strength = <2>;
bias-disable;
output-low;
};
data-pins {
pins = "gpio7";
function = "dmic1_data";
drive-strength = <2>;
bias-pull-down;
};
};
rx_swr_active: rx-swr-active-state {
clk-pins {
pins = "gpio3";
function = "swr_rx_clk";
drive-strength = <2>;
slew-rate = <1>;
bias-disable;
};
data-pins {
pins = "gpio4", "gpio5";
function = "swr_rx_data";
drive-strength = <2>;
slew-rate = <1>;
bias-bus-hold;
};
};
tx_swr_active: tx-swr-active-state {
clk-pins {
pins = "gpio0";
function = "swr_tx_clk";
drive-strength = <2>;
slew-rate = <1>;
bias-disable;
};
data-pins {
pins = "gpio1", "gpio2";
function = "swr_tx_data";
drive-strength = <2>;
slew-rate = <1>;
bias-bus-hold;
};
};
tx_swr_sleep: tx-swr-sleep-state {
clk-pins {
pins = "gpio0";
function = "swr_tx_clk";
drive-strength = <2>;
bias-pull-down;
};
data1-pins {
pins = "gpio1";
function = "swr_tx_data";
drive-strength = <2>;
bias-bus-hold;
};
data2-pins {
pins = "gpio2";
function = "swr_tx_data";
drive-strength = <2>;
bias-pull-down;
};
};
};
gpu: gpu@3d00000 {
compatible = "qcom,adreno-650.2",
"qcom,adreno";
reg = <0 0x03d00000 0 0x40000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&adreno_smmu 0 0x401>;
operating-points-v2 = <&gpu_opp_table>;
qcom,gmu = <&gmu>;
nvmem-cells = <&gpu_speed_bin>;
nvmem-cell-names = "speed_bin";
status = "disabled";
zap-shader {
memory-region = <&gpu_mem>;
};
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-670000000 {
opp-hz = /bits/ 64 <670000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
opp-supported-hw = <0xa>;
};
opp-587000000 {
opp-hz = /bits/ 64 <587000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
opp-supported-hw = <0xb>;
};
opp-525000000 {
opp-hz = /bits/ 64 <525000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
opp-supported-hw = <0xf>;
};
opp-490000000 {
opp-hz = /bits/ 64 <490000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-supported-hw = <0xf>;
};
opp-441600000 {
opp-hz = /bits/ 64 <441600000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
opp-supported-hw = <0xf>;
};
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-supported-hw = <0xf>;
};
opp-305000000 {
opp-hz = /bits/ 64 <305000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-supported-hw = <0xf>;
};
};
};
gmu: gmu@3d6a000 {
compatible = "qcom,adreno-gmu-650.2", "qcom,adreno-gmu";
reg = <0 0x03d6a000 0 0x30000>,
<0 0x3de0000 0 0x10000>,
<0 0xb290000 0 0x10000>,
<0 0xb490000 0 0x10000>;
reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq";
interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hfi", "gmu";
clocks = <&gpucc GPU_CC_AHB_CLK>,
<&gpucc GPU_CC_CX_GMU_CLK>,
<&gpucc GPU_CC_CXO_CLK>,
<&gcc GCC_DDRSS_GPU_AXI_CLK>,
<&gcc GCC_GPU_MEMNOC_GFX_CLK>;
clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
power-domains = <&gpucc GPU_CX_GDSC>,
<&gpucc GPU_GX_GDSC>;
power-domain-names = "cx", "gx";
iommus = <&adreno_smmu 5 0x400>;
operating-points-v2 = <&gmu_opp_table>;
status = "disabled";
gmu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
};
};
};
gpucc: clock-controller@3d90000 {
compatible = "qcom,sm8250-gpucc";
reg = <0 0x03d90000 0 0x9000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
clock-names = "bi_tcxo",
"gcc_gpu_gpll0_clk_src",
"gcc_gpu_gpll0_div_clk_src";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
adreno_smmu: iommu@3da0000 {
compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu",
"qcom,smmu-500", "arm,mmu-500";
reg = <0 0x03da0000 0 0x10000>;
#iommu-cells = <2>;
#global-interrupts = <2>;
interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gpucc GPU_CC_AHB_CLK>,
<&gcc GCC_GPU_MEMNOC_GFX_CLK>,
<&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
clock-names = "ahb", "bus", "iface";
power-domains = <&gpucc GPU_CX_GDSC>;
dma-coherent;
};
slpi: remoteproc@5c00000 {
compatible = "qcom,sm8250-slpi-pas";
reg = <0 0x05c00000 0 0x4000>;
interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
<&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
power-domains = <&rpmhpd RPMHPD_LCX>,
<&rpmhpd RPMHPD_LMX>;
power-domain-names = "lcx", "lmx";
memory-region = <&slpi_mem>;
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&smp2p_slpi_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_SLPI
IPCC_MPROC_SIGNAL_GLINK_QMP>;
label = "slpi";
qcom,remote-pid = <3>;
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "sdsp";
qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
compute-cb@1 {
compatible = "qcom,fastrpc-compute-cb";
reg = <1>;
iommus = <&apps_smmu 0x0541 0x0>;
};
compute-cb@2 {
compatible = "qcom,fastrpc-compute-cb";
reg = <2>;
iommus = <&apps_smmu 0x0542 0x0>;
};
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
iommus = <&apps_smmu 0x0543 0x0>;
/* note: shared-cb = <4> in downstream */
};
};
};
};
stm@6002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0 0x06002000 0 0x1000>, <0 0x16280000 0 0x180000>;
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
stm_out: endpoint {
remote-endpoint = <&funnel0_in7>;
};
};
};
};
tpda@6004000 {
compatible = "qcom,coresight-tpda", "arm,primecell";
reg = <0 0x06004000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
tpda_out_funnel_qatb: endpoint {
remote-endpoint = <&funnel_qatb_in_tpda>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@9 {
reg = <9>;
tpda_9_in_tpdm_mm: endpoint {
remote-endpoint = <&tpdm_mm_out_tpda9>;
};
};
port@17 {
reg = <23>;
tpda_23_in_tpdm_prng: endpoint {
remote-endpoint = <&tpdm_prng_out_tpda_23>;
};
};
};
};
funnel@6005000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06005000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_qatb_out_funnel_in0: endpoint {
remote-endpoint = <&funnel_in0_in_funnel_qatb>;
};
};
};
in-ports {
port {
funnel_qatb_in_tpda: endpoint {
remote-endpoint = <&tpda_out_funnel_qatb>;
};
};
};
};
funnel@6041000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06041000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_in0_out_funnel_merg: endpoint {
remote-endpoint = <&funnel_merg_in_funnel_in0>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@6 {
reg = <6>;
funnel_in0_in_funnel_qatb: endpoint {
remote-endpoint = <&funnel_qatb_out_funnel_in0>;
};
};
port@7 {
reg = <7>;
funnel0_in7: endpoint {
remote-endpoint = <&stm_out>;
};
};
};
};
funnel@6042000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06042000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_in1_out_funnel_merg: endpoint {
remote-endpoint = <&funnel_merg_in_funnel_in1>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@4 {
reg = <4>;
funnel_in1_in_funnel_apss_merg: endpoint {
remote-endpoint = <&funnel_apss_merg_out_funnel_in1>;
};
};
};
};
funnel@6045000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06045000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_merg_out_funnel_swao: endpoint {
remote-endpoint = <&funnel_swao_in_funnel_merg>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel_merg_in_funnel_in0: endpoint {
remote-endpoint = <&funnel_in0_out_funnel_merg>;
};
};
port@1 {
reg = <1>;
funnel_merg_in_funnel_in1: endpoint {
remote-endpoint = <&funnel_in1_out_funnel_merg>;
};
};
};
};
replicator@6046000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0 0x06046000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
replicator_out: endpoint {
remote-endpoint = <&etr_in>;
};
};
};
in-ports {
port {
replicator_cx_in_swao_out: endpoint {
remote-endpoint = <&replicator_swao_out_cx_in>;
};
};
};
};
etr@6048000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x06048000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,scatter-gather;
in-ports {
port {
etr_in: endpoint {
remote-endpoint = <&replicator_out>;
};
};
};
};
tpdm@684c000 {
compatible = "qcom,coresight-tpdm", "arm,primecell";
reg = <0 0x0684c000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
tpdm_prng_out_tpda_23: endpoint {
remote-endpoint = <&tpda_23_in_tpdm_prng>;
};
};
};
};
funnel@6b04000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
arm,primecell-periphid = <0x000bb908>;
reg = <0 0x06b04000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_swao_out_etf: endpoint {
remote-endpoint = <&etf_in_funnel_swao_out>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@7 {
reg = <7>;
funnel_swao_in_funnel_merg: endpoint {
remote-endpoint = <&funnel_merg_out_funnel_swao>;
};
};
};
};
etf@6b05000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x06b05000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
};
in-ports {
port {
etf_in_funnel_swao_out: endpoint {
remote-endpoint = <&funnel_swao_out_etf>;
};
};
};
};
replicator@6b06000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0 0x06b06000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
replicator_swao_out_cx_in: endpoint {
remote-endpoint = <&replicator_cx_in_swao_out>;
};
};
};
in-ports {
port {
replicator_in: endpoint {
remote-endpoint = <&etf_out>;
};
};
};
};
tpdm@6c08000 {
compatible = "qcom,coresight-tpdm", "arm,primecell";
reg = <0 0x06c08000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
tpdm_mm_out_funnel_dl_mm: endpoint {
remote-endpoint = <&funnel_dl_mm_in_tpdm_mm>;
};
};
};
};
funnel@6c0b000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06c0b000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_dl_mm_out_funnel_dl_center: endpoint {
remote-endpoint = <&funnel_dl_center_in_funnel_dl_mm>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@3 {
reg = <3>;
funnel_dl_mm_in_tpdm_mm: endpoint {
remote-endpoint = <&tpdm_mm_out_funnel_dl_mm>;
};
};
};
};
funnel@6c2d000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06c2d000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
tpdm_mm_out_tpda9: endpoint {
remote-endpoint = <&tpda_9_in_tpdm_mm>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@2 {
reg = <2>;
funnel_dl_center_in_funnel_dl_mm: endpoint {
remote-endpoint = <&funnel_dl_mm_out_funnel_dl_center>;
};
};
};
};
etm@7040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07040000 0 0x1000>;
cpu = <&CPU0>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm0_out: endpoint {
remote-endpoint = <&apss_funnel_in0>;
};
};
};
};
etm@7140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07140000 0 0x1000>;
cpu = <&CPU1>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm1_out: endpoint {
remote-endpoint = <&apss_funnel_in1>;
};
};
};
};
etm@7240000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07240000 0 0x1000>;
cpu = <&CPU2>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm2_out: endpoint {
remote-endpoint = <&apss_funnel_in2>;
};
};
};
};
etm@7340000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07340000 0 0x1000>;
cpu = <&CPU3>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm3_out: endpoint {
remote-endpoint = <&apss_funnel_in3>;
};
};
};
};
etm@7440000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07440000 0 0x1000>;
cpu = <&CPU4>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm4_out: endpoint {
remote-endpoint = <&apss_funnel_in4>;
};
};
};
};
etm@7540000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07540000 0 0x1000>;
cpu = <&CPU5>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm5_out: endpoint {
remote-endpoint = <&apss_funnel_in5>;
};
};
};
};
etm@7640000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07640000 0 0x1000>;
cpu = <&CPU6>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm6_out: endpoint {
remote-endpoint = <&apss_funnel_in6>;
};
};
};
};
etm@7740000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07740000 0 0x1000>;
cpu = <&CPU7>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm7_out: endpoint {
remote-endpoint = <&apss_funnel_in7>;
};
};
};
};
funnel@7800000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x07800000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_apss_out_funnel_apss_merg: endpoint {
remote-endpoint = <&funnel_apss_merg_in_funnel_apss>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
apss_funnel_in0: endpoint {
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
apss_funnel_in1: endpoint {
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
apss_funnel_in2: endpoint {
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
apss_funnel_in3: endpoint {
remote-endpoint = <&etm3_out>;
};
};
port@4 {
reg = <4>;
apss_funnel_in4: endpoint {
remote-endpoint = <&etm4_out>;
};
};
port@5 {
reg = <5>;
apss_funnel_in5: endpoint {
remote-endpoint = <&etm5_out>;
};
};
port@6 {
reg = <6>;
apss_funnel_in6: endpoint {
remote-endpoint = <&etm6_out>;
};
};
port@7 {
reg = <7>;
apss_funnel_in7: endpoint {
remote-endpoint = <&etm7_out>;
};
};
};
};
funnel@7810000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x07810000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_apss_merg_out_funnel_in1: endpoint {
remote-endpoint = <&funnel_in1_in_funnel_apss_merg>;
};
};
};
in-ports {
port {
funnel_apss_merg_in_funnel_apss: endpoint {
remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
};
};
};
};
cdsp: remoteproc@8300000 {
compatible = "qcom,sm8250-cdsp-pas";
reg = <0 0x08300000 0 0x10000>;
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
<&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
power-domains = <&rpmhpd RPMHPD_CX>;
memory-region = <&cdsp_mem>;
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&smp2p_cdsp_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_GLINK_QMP>;
label = "cdsp";
qcom,remote-pid = <5>;
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "cdsp";
qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
compute-cb@1 {
compatible = "qcom,fastrpc-compute-cb";
reg = <1>;
iommus = <&apps_smmu 0x1001 0x0460>;
};
compute-cb@2 {
compatible = "qcom,fastrpc-compute-cb";
reg = <2>;
iommus = <&apps_smmu 0x1002 0x0460>;
};
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
iommus = <&apps_smmu 0x1003 0x0460>;
};
compute-cb@4 {
compatible = "qcom,fastrpc-compute-cb";
reg = <4>;
iommus = <&apps_smmu 0x1004 0x0460>;
};
compute-cb@5 {
compatible = "qcom,fastrpc-compute-cb";
reg = <5>;
iommus = <&apps_smmu 0x1005 0x0460>;
};
compute-cb@6 {
compatible = "qcom,fastrpc-compute-cb";
reg = <6>;
iommus = <&apps_smmu 0x1006 0x0460>;
};
compute-cb@7 {
compatible = "qcom,fastrpc-compute-cb";
reg = <7>;
iommus = <&apps_smmu 0x1007 0x0460>;
};
compute-cb@8 {
compatible = "qcom,fastrpc-compute-cb";
reg = <8>;
iommus = <&apps_smmu 0x1008 0x0460>;
};
/* note: secure cb9 in downstream */
};
};
};
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sm8250-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
reg = <0 0x088e3000 0 0x400>;
status = "disabled";
#phy-cells = <0>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
};
usb_2_hsphy: phy@88e4000 {
compatible = "qcom,sm8250-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
reg = <0 0x088e4000 0 0x400>;
status = "disabled";
#phy-cells = <0>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "ref";
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
};
usb_1_qmpphy: phy@88e8000 {
compatible = "qcom,sm8250-qmp-usb3-dp-phy";
reg = <0 0x088e8000 0 0x3000>;
status = "disabled";
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "aux",
"ref",
"com_aux",
"usb3_pipe";
resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
#clock-cells = <1>;
#phy-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usb_1_qmpphy_out: endpoint {};
};
port@1 {
reg = <1>;
};
port@2 {
reg = <2>;
usb_1_qmpphy_dp_in: endpoint {};
};
};
};
usb_2_qmpphy: phy@88eb000 {
compatible = "qcom,sm8250-qmp-usb3-uni-phy";
reg = <0 0x088eb000 0 0x1000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_EN>,
<&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
<&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "aux",
"ref",
"com_aux",
"pipe";
clock-output-names = "usb3_uni_phy_pipe_clk_src";
#clock-cells = <0>;
#phy-cells = <0>;
resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
<&gcc GCC_USB3PHY_PHY_SEC_BCR>;
reset-names = "phy",
"phy_phy";
status = "disabled";
};
sdhc_2: mmc@8804000 {
compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "core", "xo";
iommus = <&apps_smmu 0x4a0 0x0>;
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
status = "disabled";
sdhc2_opp_table: opp-table {
compatible = "operating-points-v2";
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
pmu@9091000 {
compatible = "qcom,sm8250-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
reg = <0 0x09091000 0 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI_CH0 3>;
operating-points-v2 = <&llcc_bwmon_opp_table>;
llcc_bwmon_opp_table: opp-table {
compatible = "operating-points-v2";
opp-800000 {
opp-peak-kBps = <(200 * 4 * 1000)>;
};
opp-1200000 {
opp-peak-kBps = <(300 * 4 * 1000)>;
};
opp-1804000 {
opp-peak-kBps = <(451 * 4 * 1000)>;
};
opp-2188000 {
opp-peak-kBps = <(547 * 4 * 1000)>;
};
opp-2724000 {
opp-peak-kBps = <(681 * 4 * 1000)>;
};
opp-3072000 {
opp-peak-kBps = <(768 * 4 * 1000)>;
};
opp-4068000 {
opp-peak-kBps = <(1017 * 4 * 1000)>;
};
/* 1353 MHz, LPDDR4X */
opp-6220000 {
opp-peak-kBps = <(1555 * 4 * 1000)>;
};
opp-7216000 {
opp-peak-kBps = <(1804 * 4 * 1000)>;
};
opp-8368000 {
opp-peak-kBps = <(2092 * 4 * 1000)>;
};
/* LPDDR5 */
opp-10944000 {
opp-peak-kBps = <(2736 * 4 * 1000)>;
};
};
};
pmu@90b6400 {
compatible = "qcom,sm8250-cpu-bwmon", "qcom,sdm845-bwmon";
reg = <0 0x090b6400 0 0x600>;
interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&gem_noc MASTER_AMPSS_M0 3 &gem_noc SLAVE_LLCC 3>;
operating-points-v2 = <&cpu_bwmon_opp_table>;
cpu_bwmon_opp_table: opp-table {
compatible = "operating-points-v2";
opp-800000 {
opp-peak-kBps = <(200 * 4 * 1000)>;
};
opp-1804000 {
opp-peak-kBps = <(451 * 4 * 1000)>;
};
opp-2188000 {
opp-peak-kBps = <(547 * 4 * 1000)>;
};
opp-2724000 {
opp-peak-kBps = <(681 * 4 * 1000)>;
};
opp-3072000 {
opp-peak-kBps = <(768 * 4 * 1000)>;
};
/* 1017MHz, 1353 MHz, LPDDR4X */
opp-6220000 {
opp-peak-kBps = <(1555 * 4 * 1000)>;
};
opp-6832000 {
opp-peak-kBps = <(1708 * 4 * 1000)>;
};
opp-8368000 {
opp-peak-kBps = <(2092 * 4 * 1000)>;
};
/* 2133MHz, LPDDR4X */
/* LPDDR5 */
opp-10944000 {
opp-peak-kBps = <(2736 * 4 * 1000)>;
};
/* LPDDR5 */
opp-12784000 {
opp-peak-kBps = <(3196 * 4 * 1000)>;
};
};
};
dc_noc: interconnect@90c0000 {
compatible = "qcom,sm8250-dc-noc";
reg = <0 0x090c0000 0 0x4200>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
gem_noc: interconnect@9100000 {
compatible = "qcom,sm8250-gem-noc";
reg = <0 0x09100000 0 0xb4000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
npu_noc: interconnect@9990000 {
compatible = "qcom,sm8250-npu-noc";
reg = <0 0x09990000 0 0x1600>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
usb_1: usb@a6f8800 {
compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_EN>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
"mock_utmi",
"xo";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
<&pdc 14 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq",
"ss_phy_irq",
"dm_hs_phy_irq",
"dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
wakeup-source;
resets = <&gcc GCC_USB30_PRIM_BCR>;
interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
port {
usb_1_role_switch_out: endpoint {};
};
};
};
system-cache-controller@9200000 {
compatible = "qcom,sm8250-llcc";
reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
<0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
<0 0x09600000 0 0x50000>;
reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
"llcc3_base", "llcc_broadcast_base";
};
usb_2: usb@a8f8800 {
compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
reg = <0 0x0a8f8800 0 0x400>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
<&gcc GCC_USB30_SEC_SLEEP_CLK>,
<&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_EN>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
"mock_utmi",
"xo";
assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 13 IRQ_TYPE_EDGE_BOTH>,
<&pdc 12 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq",
"ss_phy_irq",
"dm_hs_phy_irq",
"dp_hs_phy_irq";
power-domains = <&gcc USB30_SEC_GDSC>;
wakeup-source;
resets = <&gcc GCC_USB30_SEC_BCR>;
interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
interconnect-names = "usb-ddr", "apps-usb";
usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x20 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
venus: video-codec@aa00000 {
compatible = "qcom,sm8250-venus";
reg = <0 0x0aa00000 0 0x100000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&videocc MVS0C_GDSC>,
<&videocc MVS0_GDSC>,
<&rpmhpd RPMHPD_MX>;
power-domain-names = "venus", "vcodec0", "mx";
operating-points-v2 = <&venus_opp_table>;
clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
<&videocc VIDEO_CC_MVS0C_CLK>,
<&videocc VIDEO_CC_MVS0_CLK>;
clock-names = "iface", "core", "vcodec0_core";
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_VENUS_CFG 0>,
<&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "cpu-cfg", "video-mem";
iommus = <&apps_smmu 0x2100 0x0400>;
memory-region = <&video_mem>;
resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
<&videocc VIDEO_CC_MVS0C_CLK_ARES>;
reset-names = "bus", "core";
status = "disabled";
video-decoder {
compatible = "venus-decoder";
};
video-encoder {
compatible = "venus-encoder";
};
venus_opp_table: opp-table {
compatible = "operating-points-v2";
opp-720000000 {
opp-hz = /bits/ 64 <720000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-1014000000 {
opp-hz = /bits/ 64 <1014000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-1098000000 {
opp-hz = /bits/ 64 <1098000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-1332000000 {
opp-hz = /bits/ 64 <1332000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
videocc: clock-controller@abf0000 {
compatible = "qcom,sm8250-videocc";
reg = <0 0x0abf0000 0 0x10000>;
clocks = <&gcc GCC_VIDEO_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
clock-names = "iface", "bi_tcxo", "bi_tcxo_ao";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
cci0: cci@ac4f000 {
compatible = "qcom,sm8250-cci", "qcom,msm8996-cci";
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0x0ac4f000 0 0x1000>;
interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
power-domains = <&camcc TITAN_TOP_GDSC>;
clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
<&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
<&camcc CAM_CC_CPAS_AHB_CLK>,
<&camcc CAM_CC_CCI_0_CLK>,
<&camcc CAM_CC_CCI_0_CLK_SRC>;
clock-names = "camnoc_axi",
"slow_ahb_src",
"cpas_ahb",
"cci",
"cci_src";
pinctrl-0 = <&cci0_default>;
pinctrl-1 = <&cci0_sleep>;
pinctrl-names = "default", "sleep";
status = "disabled";
cci0_i2c0: i2c-bus@0 {
reg = <0>;
clock-frequency = <1000000>;
#address-cells = <1>;
#size-cells = <0>;
};
cci0_i2c1: i2c-bus@1 {
reg = <1>;
clock-frequency = <1000000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
cci1: cci@ac50000 {
compatible = "qcom,sm8250-cci", "qcom,msm8996-cci";
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0x0ac50000 0 0x1000>;
interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
power-domains = <&camcc TITAN_TOP_GDSC>;
clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
<&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
<&camcc CAM_CC_CPAS_AHB_CLK>,
<&camcc CAM_CC_CCI_1_CLK>,
<&camcc CAM_CC_CCI_1_CLK_SRC>;
clock-names = "camnoc_axi",
"slow_ahb_src",
"cpas_ahb",
"cci",
"cci_src";
pinctrl-0 = <&cci1_default>;
pinctrl-1 = <&cci1_sleep>;
pinctrl-names = "default", "sleep";
status = "disabled";
cci1_i2c0: i2c-bus@0 {
reg = <0>;
clock-frequency = <1000000>;
#address-cells = <1>;
#size-cells = <0>;
};
cci1_i2c1: i2c-bus@1 {
reg = <1>;
clock-frequency = <1000000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
camss: camss@ac6a000 {
compatible = "qcom,sm8250-camss";
status = "disabled";
reg = <0 0x0ac6a000 0 0x2000>,
<0 0x0ac6c000 0 0x2000>,
<0 0x0ac6e000 0 0x1000>,
<0 0x0ac70000 0 0x1000>,
<0 0x0ac72000 0 0x1000>,
<0 0x0ac74000 0 0x1000>,
<0 0x0acb4000 0 0xd000>,
<0 0x0acc3000 0 0xd000>,
<0 0x0acd9000 0 0x2200>,
<0 0x0acdb200 0 0x2200>;
reg-names = "csiphy0",
"csiphy1",
"csiphy2",
"csiphy3",
"csiphy4",
"csiphy5",
"vfe0",
"vfe1",
"vfe_lite0",
"vfe_lite1";
interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "csiphy0",
"csiphy1",
"csiphy2",
"csiphy3",
"csiphy4",
"csiphy5",
"csid0",
"csid1",
"csid2",
"csid3",
"vfe0",
"vfe1",
"vfe_lite0",
"vfe_lite1";
power-domains = <&camcc IFE_0_GDSC>,
<&camcc IFE_1_GDSC>,
<&camcc TITAN_TOP_GDSC>;
clocks = <&gcc GCC_CAMERA_AHB_CLK>,
<&gcc GCC_CAMERA_HF_AXI_CLK>,
<&gcc GCC_CAMERA_SF_AXI_CLK>,
<&camcc CAM_CC_CAMNOC_AXI_CLK>,
<&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
<&camcc CAM_CC_CORE_AHB_CLK>,
<&camcc CAM_CC_CPAS_AHB_CLK>,
<&camcc CAM_CC_CSIPHY0_CLK>,
<&camcc CAM_CC_CSI0PHYTIMER_CLK>,
<&camcc CAM_CC_CSIPHY1_CLK>,
<&camcc CAM_CC_CSI1PHYTIMER_CLK>,
<&camcc CAM_CC_CSIPHY2_CLK>,
<&camcc CAM_CC_CSI2PHYTIMER_CLK>,
<&camcc CAM_CC_CSIPHY3_CLK>,
<&camcc CAM_CC_CSI3PHYTIMER_CLK>,
<&camcc CAM_CC_CSIPHY4_CLK>,
<&camcc CAM_CC_CSI4PHYTIMER_CLK>,
<&camcc CAM_CC_CSIPHY5_CLK>,
<&camcc CAM_CC_CSI5PHYTIMER_CLK>,
<&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
<&camcc CAM_CC_IFE_0_AHB_CLK>,
<&camcc CAM_CC_IFE_0_AXI_CLK>,
<&camcc CAM_CC_IFE_0_CLK>,
<&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
<&camcc CAM_CC_IFE_0_CSID_CLK>,
<&camcc CAM_CC_IFE_0_AREG_CLK>,
<&camcc CAM_CC_IFE_1_AHB_CLK>,
<&camcc CAM_CC_IFE_1_AXI_CLK>,
<&camcc CAM_CC_IFE_1_CLK>,
<&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
<&camcc CAM_CC_IFE_1_CSID_CLK>,
<&camcc CAM_CC_IFE_1_AREG_CLK>,
<&camcc CAM_CC_IFE_LITE_AHB_CLK>,
<&camcc CAM_CC_IFE_LITE_AXI_CLK>,
<&camcc CAM_CC_IFE_LITE_CLK>,
<&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
<&camcc CAM_CC_IFE_LITE_CSID_CLK>;
clock-names = "cam_ahb_clk",
"cam_hf_axi",
"cam_sf_axi",
"camnoc_axi",
"camnoc_axi_src",
"core_ahb",
"cpas_ahb",
"csiphy0",
"csiphy0_timer",
"csiphy1",
"csiphy1_timer",
"csiphy2",
"csiphy2_timer",
"csiphy3",
"csiphy3_timer",
"csiphy4",
"csiphy4_timer",
"csiphy5",
"csiphy5_timer",
"slow_ahb_src",
"vfe0_ahb",
"vfe0_axi",
"vfe0",
"vfe0_cphy_rx",
"vfe0_csid",
"vfe0_areg",
"vfe1_ahb",
"vfe1_axi",
"vfe1",
"vfe1_cphy_rx",
"vfe1_csid",
"vfe1_areg",
"vfe_lite_ahb",
"vfe_lite_axi",
"vfe_lite",
"vfe_lite_cphy_rx",
"vfe_lite_csid";
iommus = <&apps_smmu 0x800 0x400>,
<&apps_smmu 0x801 0x400>,
<&apps_smmu 0x840 0x400>,
<&apps_smmu 0x841 0x400>,
<&apps_smmu 0xc00 0x400>,
<&apps_smmu 0xc01 0x400>,
<&apps_smmu 0xc40 0x400>,
<&apps_smmu 0xc41 0x400>;
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_CAMERA_CFG 0>,
<&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI_CH0 0>,
<&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI_CH0 0>,
<&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "cam_ahb",
"cam_hf_0_mnoc",
"cam_sf_0_mnoc",
"cam_sf_icp_mnoc";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
};
port@1 {
reg = <1>;
};
port@2 {
reg = <2>;
};
port@3 {
reg = <3>;
};
port@4 {
reg = <4>;
};
port@5 {
reg = <5>;
};
};
};
camcc: clock-controller@ad00000 {
compatible = "qcom,sm8250-camcc";
reg = <0 0x0ad00000 0 0x10000>;
clocks = <&gcc GCC_CAMERA_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
mdss: display-subsystem@ae00000 {
compatible = "qcom,sm8250-mdss";
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "mdp0-mem", "mdp1-mem";
power-domains = <&dispcc MDSS_GDSC>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>,
<&gcc GCC_DISP_SF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface", "bus", "nrt_bus", "core";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
iommus = <&apps_smmu 0x820 0x402>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
mdss_mdp: display-controller@ae01000 {
compatible = "qcom,sm8250-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "iface", "bus", "core", "vsync";
assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&mdss_dsi0_in>;
};
};
port@1 {
reg = <1>;
dpu_intf2_out: endpoint {
remote-endpoint = <&mdss_dsi1_in>;
};
};
port@2 {
reg = <2>;
dpu_intf0_out: endpoint {
remote-endpoint = <&mdss_dp_in>;
};
};
};
mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-345000000 {
opp-hz = /bits/ 64 <345000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-460000000 {
opp-hz = /bits/ 64 <460000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
mdss_dp: displayport-controller@ae90000 {
compatible = "qcom,sm8250-dp", "qcom,sm8350-dp";
reg = <0 0xae90000 0 0x200>,
<0 0xae90200 0 0x200>,
<0 0xae90400 0 0x600>,
<0 0xae91000 0 0x400>,
<0 0xae91400 0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <12>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
"stream_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
#sound-dai-cells = <0>;
operating-points-v2 = <&dp_opp_table>;
power-domains = <&rpmhpd SM8250_MMCX>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dp_in: endpoint {
remote-endpoint = <&dpu_intf0_out>;
};
};
port@1 {
reg = <1>;
mdss_dp_out: endpoint {
};
};
};
dp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-270000000 {
opp-hz = /bits/ 64 <270000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-540000000 {
opp-hz = /bits/ 64 <540000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-810000000 {
opp-hz = /bits/ 64 <810000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
mdss_dsi0: dsi@ae94000 {
compatible = "qcom,sm8250-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0 0x0ae94000 0 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
<&dispcc DISP_CC_MDSS_ESC0_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&mdss_dsi0_phy>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi0_in: endpoint {
remote-endpoint = <&dpu_intf1_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi0_out: endpoint {
};
};
};
dsi_opp_table: opp-table {
compatible = "operating-points-v2";
opp-187500000 {
opp-hz = /bits/ 64 <187500000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-358000000 {
opp-hz = /bits/ 64 <358000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
mdss_dsi0_phy: phy@ae94400 {
compatible = "qcom,dsi-phy-7nm";
reg = <0 0x0ae94400 0 0x200>,
<0 0x0ae94600 0 0x280>,
<0 0x0ae94900 0 0x260>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "ref";
status = "disabled";
};
mdss_dsi1: dsi@ae96000 {
compatible = "qcom,sm8250-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0 0x0ae96000 0 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <5>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK1_CLK>,
<&dispcc DISP_CC_MDSS_ESC1_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&mdss_dsi1_phy>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi1_in: endpoint {
remote-endpoint = <&dpu_intf2_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi1_out: endpoint {
};
};
};
};
mdss_dsi1_phy: phy@ae96400 {
compatible = "qcom,dsi-phy-7nm";
reg = <0 0x0ae96400 0 0x200>,
<0 0x0ae96600 0 0x280>,
<0 0x0ae96900 0 0x260>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "ref";
status = "disabled";
};
};
dispcc: clock-controller@af00000 {
compatible = "qcom,sm8250-dispcc";
reg = <0 0x0af00000 0 0x10000>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&mdss_dsi0_phy 0>,
<&mdss_dsi0_phy 1>,
<&mdss_dsi1_phy 0>,
<&mdss_dsi1_phy 1>,
<&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
clock-names = "bi_tcxo",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
"dsi1_phy_pll_out_byteclk",
"dsi1_phy_pll_out_dsiclk",
"dp_phy_pll_link_clk",
"dp_phy_pll_vco_div_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8250-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
qcom,pdc-ranges = <0 480 94>, <94 609 31>,
<125 63 1>, <126 716 12>;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupt-controller;
};
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x1ff>; /* SROT */
#qcom,sensors = <16>;
interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
tsens1: thermal-sensor@c265000 {
compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x1ff>; /* SROT */
#qcom,sensors = <9>;
interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
aoss_qmp: power-management@c300000 {
compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_AOP
IPCC_MPROC_SIGNAL_GLINK_QMP>;
#clock-cells = <0>;
};
sram@c3f0000 {
compatible = "qcom,rpmh-stats";
reg = <0 0x0c3f0000 0 0x400>;
};
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0 0x0c440000 0x0 0x0001100>,
<0x0 0x0c600000 0x0 0x2000000>,
<0x0 0x0e600000 0x0 0x0100000>,
<0x0 0x0e700000 0x0 0x00a0000>,
<0x0 0x0c40a000 0x0 0x0026000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
tlmm: pinctrl@f100000 {
compatible = "qcom,sm8250-pinctrl";
reg = <0 0x0f100000 0 0x300000>,
<0 0x0f500000 0 0x300000>,
<0 0x0f900000 0 0x300000>;
reg-names = "west", "south", "north";
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 181>;
wakeup-parent = <&pdc>;
cam2_default: cam2-default-state {
rst-pins {
pins = "gpio78";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
mclk-pins {
pins = "gpio96";
function = "cam_mclk";
drive-strength = <16>;
bias-disable;
};
};
cam2_suspend: cam2-suspend-state {
rst-pins {
pins = "gpio78";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
output-low;
};
mclk-pins {
pins = "gpio96";
function = "cam_mclk";
drive-strength = <2>;
bias-disable;
};
};
cci0_default: cci0-default-state {
cci0_i2c0_default: cci0-i2c0-default-pins {
/* SDA, SCL */
pins = "gpio101", "gpio102";
function = "cci_i2c";
bias-pull-up;
drive-strength = <2>; /* 2 mA */
};
cci0_i2c1_default: cci0-i2c1-default-pins {
/* SDA, SCL */
pins = "gpio103", "gpio104";
function = "cci_i2c";
bias-pull-up;
drive-strength = <2>; /* 2 mA */
};
};
cci0_sleep: cci0-sleep-state {
cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
/* SDA, SCL */
pins = "gpio101", "gpio102";
function = "cci_i2c";
drive-strength = <2>; /* 2 mA */
bias-pull-down;
};
cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
/* SDA, SCL */
pins = "gpio103", "gpio104";
function = "cci_i2c";
drive-strength = <2>; /* 2 mA */
bias-pull-down;
};
};
cci1_default: cci1-default-state {
cci1_i2c0_default: cci1-i2c0-default-pins {
/* SDA, SCL */
pins = "gpio105","gpio106";
function = "cci_i2c";
bias-pull-up;
drive-strength = <2>; /* 2 mA */
};
cci1_i2c1_default: cci1-i2c1-default-pins {
/* SDA, SCL */
pins = "gpio107","gpio108";
function = "cci_i2c";
bias-pull-up;
drive-strength = <2>; /* 2 mA */
};
};
cci1_sleep: cci1-sleep-state {
cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
/* SDA, SCL */
pins = "gpio105","gpio106";
function = "cci_i2c";
bias-pull-down;
drive-strength = <2>; /* 2 mA */
};
cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
/* SDA, SCL */
pins = "gpio107","gpio108";
function = "cci_i2c";
bias-pull-down;
drive-strength = <2>; /* 2 mA */
};
};
pri_mi2s_active: pri-mi2s-active-state {
sclk-pins {
pins = "gpio138";
function = "mi2s0_sck";
drive-strength = <8>;
bias-disable;
};
ws-pins {
pins = "gpio141";
function = "mi2s0_ws";
drive-strength = <8>;
output-high;
};
data0-pins {
pins = "gpio139";
function = "mi2s0_data0";
drive-strength = <8>;
bias-disable;
output-high;
};
data1-pins {
pins = "gpio140";
function = "mi2s0_data1";
drive-strength = <8>;
output-high;
};
};
qup_i2c0_default: qup-i2c0-default-state {
pins = "gpio28", "gpio29";
function = "qup0";
drive-strength = <2>;
bias-disable;
};
qup_i2c1_default: qup-i2c1-default-state {
pins = "gpio4", "gpio5";
function = "qup1";
drive-strength = <2>;
bias-disable;
};
qup_i2c2_default: qup-i2c2-default-state {
pins = "gpio115", "gpio116";
function = "qup2";
drive-strength = <2>;
bias-disable;
};
qup_i2c3_default: qup-i2c3-default-state {
pins = "gpio119", "gpio120";
function = "qup3";
drive-strength = <2>;
bias-disable;
};
qup_i2c4_default: qup-i2c4-default-state {
pins = "gpio8", "gpio9";
function = "qup4";
drive-strength = <2>;
bias-disable;
};
qup_i2c5_default: qup-i2c5-default-state {
pins = "gpio12", "gpio13";
function = "qup5";
drive-strength = <2>;
bias-disable;
};
qup_i2c6_default: qup-i2c6-default-state {
pins = "gpio16", "gpio17";
function = "qup6";
drive-strength = <2>;
bias-disable;
};
qup_i2c7_default: qup-i2c7-default-state {
pins = "gpio20", "gpio21";
function = "qup7";
drive-strength = <2>;
bias-disable;
};
qup_i2c8_default: qup-i2c8-default-state {
pins = "gpio24", "gpio25";
function = "qup8";
drive-strength = <2>;
bias-disable;
};
qup_i2c9_default: qup-i2c9-default-state {
pins = "gpio125", "gpio126";
function = "qup9";
drive-strength = <2>;
bias-disable;
};
qup_i2c10_default: qup-i2c10-default-state {
pins = "gpio129", "gpio130";
function = "qup10";
drive-strength = <2>;
bias-disable;
};
qup_i2c11_default: qup-i2c11-default-state {
pins = "gpio60", "gpio61";
function = "qup11";
drive-strength = <2>;
bias-disable;
};
qup_i2c12_default: qup-i2c12-default-state {
pins = "gpio32", "gpio33";
function = "qup12";
drive-strength = <2>;
bias-disable;
};
qup_i2c13_default: qup-i2c13-default-state {
pins = "gpio36", "gpio37";
function = "qup13";
drive-strength = <2>;
bias-disable;
};
qup_i2c14_default: qup-i2c14-default-state {
pins = "gpio40", "gpio41";
function = "qup14";
drive-strength = <2>;
bias-disable;
};
qup_i2c15_default: qup-i2c15-default-state {
pins = "gpio44", "gpio45";
function = "qup15";
drive-strength = <2>;
bias-disable;
};
qup_i2c16_default: qup-i2c16-default-state {
pins = "gpio48", "gpio49";
function = "qup16";
drive-strength = <2>;
bias-disable;
};
qup_i2c17_default: qup-i2c17-default-state {
pins = "gpio52", "gpio53";
function = "qup17";
drive-strength = <2>;
bias-disable;
};
qup_i2c18_default: qup-i2c18-default-state {
pins = "gpio56", "gpio57";
function = "qup18";
drive-strength = <2>;
bias-disable;
};
qup_i2c19_default: qup-i2c19-default-state {
pins = "gpio0", "gpio1";
function = "qup19";
drive-strength = <2>;
bias-disable;
};
qup_spi0_cs: qup-spi0-cs-state {
pins = "gpio31";
function = "qup0";
};
qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
pins = "gpio31";
function = "gpio";
};
qup_spi0_data_clk: qup-spi0-data-clk-state {
pins = "gpio28", "gpio29",
"gpio30";
function = "qup0";
};
qup_spi1_cs: qup-spi1-cs-state {
pins = "gpio7";
function = "qup1";
};
qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
pins = "gpio7";
function = "gpio";
};
qup_spi1_data_clk: qup-spi1-data-clk-state {
pins = "gpio4", "gpio5",
"gpio6";
function = "qup1";
};
qup_spi2_cs: qup-spi2-cs-state {
pins = "gpio118";
function = "qup2";
};
qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
pins = "gpio118";
function = "gpio";
};
qup_spi2_data_clk: qup-spi2-data-clk-state {
pins = "gpio115", "gpio116",
"gpio117";
function = "qup2";
};
qup_spi3_cs: qup-spi3-cs-state {
pins = "gpio122";
function = "qup3";
};
qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
pins = "gpio122";
function = "gpio";
};
qup_spi3_data_clk: qup-spi3-data-clk-state {
pins = "gpio119", "gpio120",
"gpio121";
function = "qup3";
};
qup_spi4_cs: qup-spi4-cs-state {
pins = "gpio11";
function = "qup4";
};
qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
pins = "gpio11";
function = "gpio";
};
qup_spi4_data_clk: qup-spi4-data-clk-state {
pins = "gpio8", "gpio9",
"gpio10";
function = "qup4";
};
qup_spi5_cs: qup-spi5-cs-state {
pins = "gpio15";
function = "qup5";
};
qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
pins = "gpio15";
function = "gpio";
};
qup_spi5_data_clk: qup-spi5-data-clk-state {
pins = "gpio12", "gpio13",
"gpio14";
function = "qup5";
};
qup_spi6_cs: qup-spi6-cs-state {
pins = "gpio19";
function = "qup6";
};
qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
pins = "gpio19";
function = "gpio";
};
qup_spi6_data_clk: qup-spi6-data-clk-state {
pins = "gpio16", "gpio17",
"gpio18";
function = "qup6";
};
qup_spi7_cs: qup-spi7-cs-state {
pins = "gpio23";
function = "qup7";
};
qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
pins = "gpio23";
function = "gpio";
};
qup_spi7_data_clk: qup-spi7-data-clk-state {
pins = "gpio20", "gpio21",
"gpio22";
function = "qup7";
};
qup_spi8_cs: qup-spi8-cs-state {
pins = "gpio27";
function = "qup8";
};
qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
pins = "gpio27";
function = "gpio";
};
qup_spi8_data_clk: qup-spi8-data-clk-state {
pins = "gpio24", "gpio25",
"gpio26";
function = "qup8";
};
qup_spi9_cs: qup-spi9-cs-state {
pins = "gpio128";
function = "qup9";
};
qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
pins = "gpio128";
function = "gpio";
};
qup_spi9_data_clk: qup-spi9-data-clk-state {
pins = "gpio125", "gpio126",
"gpio127";
function = "qup9";
};
qup_spi10_cs: qup-spi10-cs-state {
pins = "gpio132";
function = "qup10";
};
qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
pins = "gpio132";
function = "gpio";
};
qup_spi10_data_clk: qup-spi10-data-clk-state {
pins = "gpio129", "gpio130",
"gpio131";
function = "qup10";
};
qup_spi11_cs: qup-spi11-cs-state {
pins = "gpio63";
function = "qup11";
};
qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
pins = "gpio63";
function = "gpio";
};
qup_spi11_data_clk: qup-spi11-data-clk-state {
pins = "gpio60", "gpio61",
"gpio62";
function = "qup11";
};
qup_spi12_cs: qup-spi12-cs-state {
pins = "gpio35";
function = "qup12";
};
qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
pins = "gpio35";
function = "gpio";
};
qup_spi12_data_clk: qup-spi12-data-clk-state {
pins = "gpio32", "gpio33",
"gpio34";
function = "qup12";
};
qup_spi13_cs: qup-spi13-cs-state {
pins = "gpio39";
function = "qup13";
};
qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
pins = "gpio39";
function = "gpio";
};
qup_spi13_data_clk: qup-spi13-data-clk-state {
pins = "gpio36", "gpio37",
"gpio38";
function = "qup13";
};
qup_spi14_cs: qup-spi14-cs-state {
pins = "gpio43";
function = "qup14";
};
qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
pins = "gpio43";
function = "gpio";
};
qup_spi14_data_clk: qup-spi14-data-clk-state {
pins = "gpio40", "gpio41",
"gpio42";
function = "qup14";
};
qup_spi15_cs: qup-spi15-cs-state {
pins = "gpio47";
function = "qup15";
};
qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
pins = "gpio47";
function = "gpio";
};
qup_spi15_data_clk: qup-spi15-data-clk-state {
pins = "gpio44", "gpio45",
"gpio46";
function = "qup15";
};
qup_spi16_cs: qup-spi16-cs-state {
pins = "gpio51";
function = "qup16";
};
qup_spi16_cs_gpio: qup-spi16-cs-gpio-state {
pins = "gpio51";
function = "gpio";
};
qup_spi16_data_clk: qup-spi16-data-clk-state {
pins = "gpio48", "gpio49",
"gpio50";
function = "qup16";
};
qup_spi17_cs: qup-spi17-cs-state {
pins = "gpio55";
function = "qup17";
};
qup_spi17_cs_gpio: qup-spi17-cs-gpio-state {
pins = "gpio55";
function = "gpio";
};
qup_spi17_data_clk: qup-spi17-data-clk-state {
pins = "gpio52", "gpio53",
"gpio54";
function = "qup17";
};
qup_spi18_cs: qup-spi18-cs-state {
pins = "gpio59";
function = "qup18";
};
qup_spi18_cs_gpio: qup-spi18-cs-gpio-state {
pins = "gpio59";
function = "gpio";
};
qup_spi18_data_clk: qup-spi18-data-clk-state {
pins = "gpio56", "gpio57",
"gpio58";
function = "qup18";
};
qup_spi19_cs: qup-spi19-cs-state {
pins = "gpio3";
function = "qup19";
};
qup_spi19_cs_gpio: qup-spi19-cs-gpio-state {
pins = "gpio3";
function = "gpio";
};
qup_spi19_data_clk: qup-spi19-data-clk-state {
pins = "gpio0", "gpio1",
"gpio2";
function = "qup19";
};
qup_uart2_default: qup-uart2-default-state {
pins = "gpio117", "gpio118";
function = "qup2";
};
qup_uart6_default: qup-uart6-default-state {
pins = "gpio16", "gpio17", "gpio18", "gpio19";
function = "qup6";
};
qup_uart12_default: qup-uart12-default-state {
pins = "gpio34", "gpio35";
function = "qup12";
};
qup_uart17_default: qup-uart17-default-state {
pins = "gpio52", "gpio53", "gpio54", "gpio55";
function = "qup17";
};
qup_uart18_default: qup-uart18-default-state {
pins = "gpio58", "gpio59";
function = "qup18";
};
tert_mi2s_active: tert-mi2s-active-state {
sck-pins {
pins = "gpio133";
function = "mi2s2_sck";
drive-strength = <8>;
bias-disable;
};
data0-pins {
pins = "gpio134";
function = "mi2s2_data0";
drive-strength = <8>;
bias-disable;
output-high;
};
ws-pins {
pins = "gpio135";
function = "mi2s2_ws";
drive-strength = <8>;
output-high;
};
};
sdc2_sleep_state: sdc2-sleep-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <2>;
bias-disable;
};
cmd-pins {
pins = "sdc2_cmd";
drive-strength = <2>;
bias-pull-up;
};
data-pins {
pins = "sdc2_data";
drive-strength = <2>;
bias-pull-up;
};
};
pcie0_default_state: pcie0-default-state {
perst-pins {
pins = "gpio79";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
clkreq-pins {
pins = "gpio80";
function = "pci_e0";
drive-strength = <2>;
bias-pull-up;
};
wake-pins {
pins = "gpio81";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie1_default_state: pcie1-default-state {
perst-pins {
pins = "gpio82";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
clkreq-pins {
pins = "gpio83";
function = "pci_e1";
drive-strength = <2>;
bias-pull-up;
};
wake-pins {
pins = "gpio84";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie2_default_state: pcie2-default-state {
perst-pins {
pins = "gpio85";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
clkreq-pins {
pins = "gpio86";
function = "pci_e2";
drive-strength = <2>;
bias-pull-up;
};
wake-pins {
pins = "gpio87";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};
apps_smmu: iommu@15000000 {
compatible = "qcom,sm8250-smmu-500", "qcom,smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x100000>;
#iommu-cells = <2>;
#global-interrupts = <2>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
};
adsp: remoteproc@17300000 {
compatible = "qcom,sm8250-adsp-pas";
reg = <0 0x17300000 0 0x100>;
interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
power-domains = <&rpmhpd RPMHPD_LCX>,
<&rpmhpd RPMHPD_LMX>;
power-domain-names = "lcx", "lmx";
memory-region = <&adsp_mem>;
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&smp2p_adsp_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_LPASS
IPCC_MPROC_SIGNAL_GLINK_QMP>;
label = "lpass";
qcom,remote-pid = <2>;
apr {
compatible = "qcom,apr-v2";
qcom,glink-channels = "apr_audio_svc";
qcom,domain = <APR_DOMAIN_ADSP>;
#address-cells = <1>;
#size-cells = <0>;
service@3 {
reg = <APR_SVC_ADSP_CORE>;
compatible = "qcom,q6core";
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
};
q6afe: service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
q6afedai: dais {
compatible = "qcom,q6afe-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
};
q6afecc: clock-controller {
compatible = "qcom,q6afe-clocks";
#clock-cells = <2>;
};
};
q6asm: service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
iommus = <&apps_smmu 0x1801 0x0>;
};
};
q6adm: service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
q6routing: routing {
compatible = "qcom,q6adm-routing";
#sound-dai-cells = <0>;
};
};
};
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "adsp";
qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
iommus = <&apps_smmu 0x1803 0x0>;
};
compute-cb@4 {
compatible = "qcom,fastrpc-compute-cb";
reg = <4>;
iommus = <&apps_smmu 0x1804 0x0>;
};
compute-cb@5 {
compatible = "qcom,fastrpc-compute-cb";
reg = <5>;
iommus = <&apps_smmu 0x1805 0x0>;
};
};
};
};
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
<0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
watchdog@17c10000 {
compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
timer@17c20000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17c21000 0x1000>,
<0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
apps_rsc: rsc@18200000 {
label = "apps_rsc";
compatible = "qcom,rpmh-rsc";
reg = <0x0 0x18200000 0x0 0x10000>,
<0x0 0x18210000 0x0 0x10000>,
<0x0 0x18220000 0x0 0x10000>;
reg-names = "drv-0", "drv-1", "drv-2";
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
qcom,tcs-offset = <0xd00>;
qcom,drv-id = <2>;
qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
<WAKE_TCS 3>, <CONTROL_TCS 1>;
power-domains = <&CLUSTER_PD>;
rpmhcc: clock-controller {
compatible = "qcom,sm8250-rpmh-clk";
#clock-cells = <1>;
clock-names = "xo";
clocks = <&xo_board>;
};
rpmhpd: power-controller {
compatible = "qcom,sm8250-rpmhpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmhpd_opp_table>;
rpmhpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmhpd_opp_ret: opp1 {
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
};
rpmhpd_opp_min_svs: opp2 {
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
};
rpmhpd_opp_low_svs: opp3 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
};
rpmhpd_opp_svs: opp4 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
};
rpmhpd_opp_svs_l1: opp5 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
};
rpmhpd_opp_nom: opp6 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
};
rpmhpd_opp_nom_l1: opp7 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
};
rpmhpd_opp_nom_l2: opp8 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
};
rpmhpd_opp_turbo: opp9 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
};
rpmhpd_opp_turbo_l1: opp10 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
};
};
};
apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
};
epss_l3: interconnect@18590000 {
compatible = "qcom,sm8250-epss-l3", "qcom,epss-l3";
reg = <0 0x18590000 0 0x1000>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
clock-names = "xo", "alternate";
#interconnect-cells = <1>;
};
cpufreq_hw: cpufreq@18591000 {
compatible = "qcom,sm8250-cpufreq-epss", "qcom,cpufreq-epss";
reg = <0 0x18591000 0 0x1000>,
<0 0x18592000 0 0x1000>,
<0 0x18593000 0 0x1000>;
reg-names = "freq-domain0", "freq-domain1",
"freq-domain2";
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
clock-names = "xo", "alternate";
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
#freq-domain-cells = <1>;
#clock-cells = <1>;
};
};
sound: sound {
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 1>;
trips {
cpu0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu0_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu0_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 2>;
trips {
cpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu1_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu1_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
trips {
cpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu2_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu2_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 4>;
trips {
cpu3_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu3_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu3_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu4-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 7>;
trips {
cpu4_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_top_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu4_top_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu4_top_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu5-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
trips {
cpu5_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_top_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu5_top_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu5_top_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu6-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 9>;
trips {
cpu6_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_top_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu6_top_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu6_top_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu7-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
trips {
cpu7_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_top_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu7_top_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu7_top_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu4-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 11>;
trips {
cpu4_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_bottom_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu4_bottom_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu4_bottom_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu5-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 12>;
trips {
cpu5_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_bottom_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu5_bottom_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu5_bottom_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu6-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 13>;
trips {
cpu6_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_bottom_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu6_bottom_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu6_bottom_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu7-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 14>;
trips {
cpu7_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_bottom_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu7_bottom_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu7_bottom_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
aoss0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 0>;
trips {
aoss0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
cluster0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
trips {
cluster0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
cluster0_crit: cluster0_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cluster1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 6>;
trips {
cluster1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
cluster1_crit: cluster1_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
gpu-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 15>;
trips {
gpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
aoss1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 0>;
trips {
aoss1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
wlan-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 1>;
trips {
wlan_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
video-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 2>;
trips {
video_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
mem-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 3>;
trips {
mem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
q6-hvx-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 4>;
trips {
q6_hvx_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
camera-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 5>;
trips {
camera_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
compute-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 6>;
trips {
compute_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
npu-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 7>;
trips {
npu_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
gpu-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 8>;
trips {
gpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
};
};