blob: 3e660ff6cd5ff3d966356667e5b7db80a298da3b [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2023 Ondřej Jirman <megi@xff.cz>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588.dtsi"
/ {
model = "Xunlong Orange Pi 5 Plus";
compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588";
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
};
chosen {
stdout-path = "serial2:1500000n8";
};
adc-keys-0 {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
button-maskrom {
label = "Mask Rom";
linux,code = <KEY_SETUP>;
press-threshold-microvolt = <2000>;
};
};
adc-keys-1 {
compatible = "adc-keys";
io-channels = <&saradc 1>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
button-recovery {
label = "Recovery";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <2000>;
};
};
speaker_amp: speaker-audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
sound-name-prefix = "Speaker Amp";
};
headphone_amp: headphones-audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
sound-name-prefix = "Headphones Amp";
};
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_receiver_pin>;
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&blue_led_pin>;
led {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <1>;
gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
};
};
fan: pwm-fan {
compatible = "pwm-fan";
cooling-levels = <0 70 75 80 100>;
fan-supply = <&vcc5v0_sys>;
pwms = <&pwm3 0 50000 0>;
#cooling-cells = <2>;
};
pwm-leds {
compatible = "pwm-leds";
led {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <2>;
max-brightness = <255>;
pwms = <&pwm2 0 25000 0>;
};
};
sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
pinctrl-0 = <&hp_detect>;
simple-audio-card,name = "Analog";
simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,hp-det-gpio = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
simple-audio-card,bitclock-master = <&daicpu>;
simple-audio-card,frame-master = <&daicpu>;
/*TODO: SARADC_IN3 is used as MIC detection / key input */
simple-audio-card,widgets =
"Microphone", "Onboard Microphone",
"Microphone", "Microphone Jack",
"Speaker", "Speaker",
"Headphone", "Headphones";
simple-audio-card,routing =
"Headphones", "LOUT1",
"Headphones", "ROUT1",
"Speaker", "LOUT2",
"Speaker", "ROUT2",
"Headphones", "Headphones Amp OUTL",
"Headphones", "Headphones Amp OUTR",
"Headphones Amp INL", "LOUT1",
"Headphones Amp INR", "ROUT1",
"Speaker", "Speaker Amp OUTL",
"Speaker", "Speaker Amp OUTR",
"Speaker Amp INL", "LOUT2",
"Speaker Amp INR", "ROUT2",
/* single ended signal to LINPUT1 */
"LINPUT1", "Microphone Jack",
"RINPUT1", "Microphone Jack",
/* differential signal */
"LINPUT2", "Onboard Microphone",
"RINPUT2", "Onboard Microphone";
daicpu: simple-audio-card,cpu {
sound-dai = <&i2s0_8ch>;
system-clock-frequency = <12288000>;
};
daicodec: simple-audio-card,codec {
sound-dai = <&es8388>;
system-clock-frequency = <12288000>;
};
};
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
regulator-name = "vcc3v3_pcie30";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <5000>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_pcie_eth: vcc3v3-pcie-eth-regulator {
compatible = "regulator-fixed";
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
regulator-name = "vcc3v3_pcie_eth";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <50000>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_wf: vcc3v3-wf-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
regulator-name = "vcc3v3_wf";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <50000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc5v0_usb20: vcc5v0-usb20-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb20_en>;
regulator-name = "vcc5v0_usb20";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
};
&combphy0_ps {
status = "okay";
};
&combphy1_ps {
status = "okay";
};
&combphy2_psu {
status = "okay";
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b2 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_b3 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
vdd_cpu_big0_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big0_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_big1_s0: regulator@43 {
compatible = "rockchip,rk8603", "rockchip,rk8602";
reg = <0x43>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big1_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c6 {
clock-frequency = <400000>;
status = "okay";
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <0>;
clock-output-names = "hym8563";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
wakeup-source;
};
};
&i2c7 {
status = "okay";
/* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */
es8388: audio-codec@11 {
compatible = "everest,es8388";
reg = <0x11>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
clock-names = "mclk";
AVDD-supply = <&vcc_1v8_s0>;
DVDD-supply = <&vcc_1v8_s0>;
HPVDD-supply = <&vcc_3v3_s0>;
PVDD-supply = <&vcc_3v3_s0>;
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
#sound-dai-cells = <0>;
};
};
&i2s0_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s0_lrck
&i2s0_mclk
&i2s0_sclk
&i2s0_sdi0
&i2s0_sdo0>;
status = "okay";
};
&i2s2_2ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s2m0_lrck
&i2s2m0_sclk
&i2s2m0_sdi
&i2s2m0_sdo>;
status = "okay";
};
/* phy1 - M.KEY socket */
&pcie2x1l0 {
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_wf>;
status = "okay";
};
/* phy2 - right ethernet port */
&pcie2x1l1 {
reset-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie_eth>;
status = "okay";
};
/* phy0 - left ethernet port */
&pcie2x1l2 {
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie_eth>;
status = "okay";
};
&pcie30phy {
status = "okay";
};
&pcie3x4 {
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie30>;
status = "okay";
};
&pinctrl {
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
blue_led_pin: blue-led {
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
ir-receiver {
ir_receiver_pin: ir-receiver-pin {
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sound {
hp_detect: hp-detect {
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
vcc5v0_usb20_en: vcc5v0-usb20-en {
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm2 {
pinctrl-0 = <&pwm2m1_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm3 {
pinctrl-0 = <&pwm3m1_pins>;
status = "okay";
};
&saradc {
vref-supply = <&vcc_1v8_s0>;
status = "okay";
};
&sdhci {
bus-width = <8>;
no-sdio;
no-sd;
non-removable;
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
no-sdio;
no-mmc;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";
};
&sfc {
pinctrl-names = "default";
pinctrl-0 = <&fspim1_pins>;
status = "okay";
spi_flash: flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <100000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
};
};
&spi2 {
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
num-cs = <1>;
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
status = "okay";
pmic@0 {
compatible = "rockchip,rk806";
reg = <0x0>;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
spi-max-frequency = <1000000>;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc5v0_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc5v0_sys>;
vcc10-supply = <&vcc5v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc5v0_sys>;
vcc13-supply = <&vdd2_ddr_s3>;
vcc14-supply = <&vdd2_ddr_s3>;
vcca-supply = <&vcc5v0_sys>;
gpio-controller;
#gpio-cells = <2>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_gpu_s0: dcdc-reg1 {
regulator-name = "vdd_gpu_s0";
regulator-boot-on;
regulator-enable-ramp-delay = <400>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_s0: dcdc-reg2 {
regulator-name = "vdd_cpu_lit_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_log_s0: dcdc-reg3 {
regulator-name = "vdd_log_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <825000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_vdenc_s0: dcdc-reg4 {
regulator-name = "vdd_vdenc_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <825000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_ddr_s0: dcdc-reg5 {
regulator-name = "vdd_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <900000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdd2_ddr_s3: dcdc-reg6 {
regulator-name = "vdd2_ddr_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_2v0_pldo_s3: dcdc-reg7 {
regulator-name = "vdd_2v0_pldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <2000000>;
};
};
vcc_3v3_s3: dcdc-reg8 {
regulator-name = "vcc_3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vddq_ddr_s0: dcdc-reg9 {
regulator-name = "vddq_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s3: dcdc-reg10 {
regulator-name = "vcc_1v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avcc_1v8_s0: pldo-reg1 {
regulator-name = "avcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
/* shorted to avcc_1v8_s0 on the board */
vcc_1v8_s0: pldo-reg2 {
regulator-name = "vcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avdd_1v2_s0: pldo-reg3 {
regulator-name = "avdd_1v2_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3_s0: pldo-reg4 {
regulator-name = "vcc_3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd_s0: pldo-reg5 {
regulator-name = "vccio_sd_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
pldo6_s3: pldo-reg6 {
regulator-name = "pldo6_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_s3: nldo-reg1 {
regulator-name = "vdd_0v75_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_ddr_pll_s0: nldo-reg2 {
regulator-name = "vdd_ddr_pll_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
avdd_0v75_s0: nldo-reg3 {
regulator-name = "avdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
/*
* The schematic mentions that actual setting
* should be 0.8375V. RK3588 datasheet specifies
* maximum as 0.825V. So we set datasheet max
* here.
*/
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <825000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v85_s0: nldo-reg4 {
regulator-name = "vdd_0v85_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v75_s0: nldo-reg5 {
regulator-name = "vdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&tsadc {
status = "okay";
};
&u2phy2 {
status = "okay";
};
&u2phy3 {
status = "okay";
};
&u2phy2_host {
phy-supply = <&vcc5v0_usb20>;
status = "okay";
};
&u2phy3_host {
phy-supply = <&vcc5v0_usb20>;
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
&uart9 {
pinctrl-0 = <&uart9m0_xfer>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};