| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Thunderbolt/USB4 retimer support. |
| * |
| * Copyright (C) 2020, Intel Corporation |
| * Authors: Kranthi Kuntala <kranthi.kuntala@intel.com> |
| * Mika Westerberg <mika.westerberg@linux.intel.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/sched/signal.h> |
| |
| #include "sb_regs.h" |
| #include "tb.h" |
| |
| #define TB_MAX_RETIMER_INDEX 6 |
| |
| static int tb_retimer_nvm_read(void *priv, unsigned int offset, void *val, |
| size_t bytes) |
| { |
| struct tb_nvm *nvm = priv; |
| struct tb_retimer *rt = tb_to_retimer(nvm->dev); |
| int ret; |
| |
| pm_runtime_get_sync(&rt->dev); |
| |
| if (!mutex_trylock(&rt->tb->lock)) { |
| ret = restart_syscall(); |
| goto out; |
| } |
| |
| ret = usb4_port_retimer_nvm_read(rt->port, rt->index, offset, val, bytes); |
| mutex_unlock(&rt->tb->lock); |
| |
| out: |
| pm_runtime_mark_last_busy(&rt->dev); |
| pm_runtime_put_autosuspend(&rt->dev); |
| |
| return ret; |
| } |
| |
| static int tb_retimer_nvm_write(void *priv, unsigned int offset, void *val, |
| size_t bytes) |
| { |
| struct tb_nvm *nvm = priv; |
| struct tb_retimer *rt = tb_to_retimer(nvm->dev); |
| int ret = 0; |
| |
| if (!mutex_trylock(&rt->tb->lock)) |
| return restart_syscall(); |
| |
| ret = tb_nvm_write_buf(nvm, offset, val, bytes); |
| mutex_unlock(&rt->tb->lock); |
| |
| return ret; |
| } |
| |
| static int tb_retimer_nvm_add(struct tb_retimer *rt) |
| { |
| struct tb_nvm *nvm; |
| u32 val, nvm_size; |
| int ret; |
| |
| nvm = tb_nvm_alloc(&rt->dev); |
| if (IS_ERR(nvm)) |
| return PTR_ERR(nvm); |
| |
| ret = usb4_port_retimer_nvm_read(rt->port, rt->index, NVM_VERSION, &val, |
| sizeof(val)); |
| if (ret) |
| goto err_nvm; |
| |
| nvm->major = val >> 16; |
| nvm->minor = val >> 8; |
| |
| ret = usb4_port_retimer_nvm_read(rt->port, rt->index, NVM_FLASH_SIZE, |
| &val, sizeof(val)); |
| if (ret) |
| goto err_nvm; |
| |
| nvm_size = (SZ_1M << (val & 7)) / 8; |
| nvm_size = (nvm_size - SZ_16K) / 2; |
| |
| ret = tb_nvm_add_active(nvm, nvm_size, tb_retimer_nvm_read); |
| if (ret) |
| goto err_nvm; |
| |
| ret = tb_nvm_add_non_active(nvm, NVM_MAX_SIZE, tb_retimer_nvm_write); |
| if (ret) |
| goto err_nvm; |
| |
| rt->nvm = nvm; |
| return 0; |
| |
| err_nvm: |
| tb_nvm_free(nvm); |
| return ret; |
| } |
| |
| static int tb_retimer_nvm_validate_and_write(struct tb_retimer *rt) |
| { |
| unsigned int image_size, hdr_size; |
| const u8 *buf = rt->nvm->buf; |
| u16 ds_size, device; |
| |
| image_size = rt->nvm->buf_data_size; |
| if (image_size < NVM_MIN_SIZE || image_size > NVM_MAX_SIZE) |
| return -EINVAL; |
| |
| /* |
| * FARB pointer must point inside the image and must at least |
| * contain parts of the digital section we will be reading here. |
| */ |
| hdr_size = (*(u32 *)buf) & 0xffffff; |
| if (hdr_size + NVM_DEVID + 2 >= image_size) |
| return -EINVAL; |
| |
| /* Digital section start should be aligned to 4k page */ |
| if (!IS_ALIGNED(hdr_size, SZ_4K)) |
| return -EINVAL; |
| |
| /* |
| * Read digital section size and check that it also fits inside |
| * the image. |
| */ |
| ds_size = *(u16 *)(buf + hdr_size); |
| if (ds_size >= image_size) |
| return -EINVAL; |
| |
| /* |
| * Make sure the device ID in the image matches the retimer |
| * hardware. |
| */ |
| device = *(u16 *)(buf + hdr_size + NVM_DEVID); |
| if (device != rt->device) |
| return -EINVAL; |
| |
| /* Skip headers in the image */ |
| buf += hdr_size; |
| image_size -= hdr_size; |
| |
| return usb4_port_retimer_nvm_write(rt->port, rt->index, 0, buf, |
| image_size); |
| } |
| |
| static ssize_t device_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct tb_retimer *rt = tb_to_retimer(dev); |
| |
| return sprintf(buf, "%#x\n", rt->device); |
| } |
| static DEVICE_ATTR_RO(device); |
| |
| static ssize_t nvm_authenticate_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct tb_retimer *rt = tb_to_retimer(dev); |
| int ret; |
| |
| if (!mutex_trylock(&rt->tb->lock)) |
| return restart_syscall(); |
| |
| if (!rt->nvm) |
| ret = -EAGAIN; |
| else |
| ret = sprintf(buf, "%#x\n", rt->auth_status); |
| |
| mutex_unlock(&rt->tb->lock); |
| |
| return ret; |
| } |
| |
| static ssize_t nvm_authenticate_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct tb_retimer *rt = tb_to_retimer(dev); |
| bool val; |
| int ret; |
| |
| pm_runtime_get_sync(&rt->dev); |
| |
| if (!mutex_trylock(&rt->tb->lock)) { |
| ret = restart_syscall(); |
| goto exit_rpm; |
| } |
| |
| if (!rt->nvm) { |
| ret = -EAGAIN; |
| goto exit_unlock; |
| } |
| |
| ret = kstrtobool(buf, &val); |
| if (ret) |
| goto exit_unlock; |
| |
| /* Always clear status */ |
| rt->auth_status = 0; |
| |
| if (val) { |
| if (!rt->nvm->buf) { |
| ret = -EINVAL; |
| goto exit_unlock; |
| } |
| |
| ret = tb_retimer_nvm_validate_and_write(rt); |
| if (ret) |
| goto exit_unlock; |
| |
| ret = usb4_port_retimer_nvm_authenticate(rt->port, rt->index); |
| } |
| |
| exit_unlock: |
| mutex_unlock(&rt->tb->lock); |
| exit_rpm: |
| pm_runtime_mark_last_busy(&rt->dev); |
| pm_runtime_put_autosuspend(&rt->dev); |
| |
| if (ret) |
| return ret; |
| return count; |
| } |
| static DEVICE_ATTR_RW(nvm_authenticate); |
| |
| static ssize_t nvm_version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct tb_retimer *rt = tb_to_retimer(dev); |
| int ret; |
| |
| if (!mutex_trylock(&rt->tb->lock)) |
| return restart_syscall(); |
| |
| if (!rt->nvm) |
| ret = -EAGAIN; |
| else |
| ret = sprintf(buf, "%x.%x\n", rt->nvm->major, rt->nvm->minor); |
| |
| mutex_unlock(&rt->tb->lock); |
| return ret; |
| } |
| static DEVICE_ATTR_RO(nvm_version); |
| |
| static ssize_t vendor_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct tb_retimer *rt = tb_to_retimer(dev); |
| |
| return sprintf(buf, "%#x\n", rt->vendor); |
| } |
| static DEVICE_ATTR_RO(vendor); |
| |
| static struct attribute *retimer_attrs[] = { |
| &dev_attr_device.attr, |
| &dev_attr_nvm_authenticate.attr, |
| &dev_attr_nvm_version.attr, |
| &dev_attr_vendor.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group retimer_group = { |
| .attrs = retimer_attrs, |
| }; |
| |
| static const struct attribute_group *retimer_groups[] = { |
| &retimer_group, |
| NULL |
| }; |
| |
| static void tb_retimer_release(struct device *dev) |
| { |
| struct tb_retimer *rt = tb_to_retimer(dev); |
| |
| kfree(rt); |
| } |
| |
| struct device_type tb_retimer_type = { |
| .name = "thunderbolt_retimer", |
| .groups = retimer_groups, |
| .release = tb_retimer_release, |
| }; |
| |
| static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status) |
| { |
| struct tb_retimer *rt; |
| u32 vendor, device; |
| int ret; |
| |
| if (!port->cap_usb4) |
| return -EINVAL; |
| |
| ret = usb4_port_retimer_read(port, index, USB4_SB_VENDOR_ID, &vendor, |
| sizeof(vendor)); |
| if (ret) { |
| if (ret != -ENODEV) |
| tb_port_warn(port, "failed read retimer VendorId: %d\n", ret); |
| return ret; |
| } |
| |
| ret = usb4_port_retimer_read(port, index, USB4_SB_PRODUCT_ID, &device, |
| sizeof(device)); |
| if (ret) { |
| if (ret != -ENODEV) |
| tb_port_warn(port, "failed read retimer ProductId: %d\n", ret); |
| return ret; |
| } |
| |
| if (vendor != PCI_VENDOR_ID_INTEL && vendor != 0x8087) { |
| tb_port_info(port, "retimer NVM format of vendor %#x is not supported\n", |
| vendor); |
| return -EOPNOTSUPP; |
| } |
| |
| /* |
| * Check that it supports NVM operations. If not then don't add |
| * the device at all. |
| */ |
| ret = usb4_port_retimer_nvm_sector_size(port, index); |
| if (ret < 0) |
| return ret; |
| |
| rt = kzalloc(sizeof(*rt), GFP_KERNEL); |
| if (!rt) |
| return -ENOMEM; |
| |
| rt->index = index; |
| rt->vendor = vendor; |
| rt->device = device; |
| rt->auth_status = auth_status; |
| rt->port = port; |
| rt->tb = port->sw->tb; |
| |
| rt->dev.parent = &port->sw->dev; |
| rt->dev.bus = &tb_bus_type; |
| rt->dev.type = &tb_retimer_type; |
| dev_set_name(&rt->dev, "%s:%u.%u", dev_name(&port->sw->dev), |
| port->port, index); |
| |
| ret = device_register(&rt->dev); |
| if (ret) { |
| dev_err(&rt->dev, "failed to register retimer: %d\n", ret); |
| put_device(&rt->dev); |
| return ret; |
| } |
| |
| ret = tb_retimer_nvm_add(rt); |
| if (ret) { |
| dev_err(&rt->dev, "failed to add NVM devices: %d\n", ret); |
| device_del(&rt->dev); |
| return ret; |
| } |
| |
| dev_info(&rt->dev, "new retimer found, vendor=%#x device=%#x\n", |
| rt->vendor, rt->device); |
| |
| pm_runtime_no_callbacks(&rt->dev); |
| pm_runtime_set_active(&rt->dev); |
| pm_runtime_enable(&rt->dev); |
| pm_runtime_set_autosuspend_delay(&rt->dev, TB_AUTOSUSPEND_DELAY); |
| pm_runtime_mark_last_busy(&rt->dev); |
| pm_runtime_use_autosuspend(&rt->dev); |
| |
| return 0; |
| } |
| |
| static void tb_retimer_remove(struct tb_retimer *rt) |
| { |
| dev_info(&rt->dev, "retimer disconnected\n"); |
| tb_nvm_free(rt->nvm); |
| device_unregister(&rt->dev); |
| } |
| |
| struct tb_retimer_lookup { |
| const struct tb_port *port; |
| u8 index; |
| }; |
| |
| static int retimer_match(struct device *dev, void *data) |
| { |
| const struct tb_retimer_lookup *lookup = data; |
| struct tb_retimer *rt = tb_to_retimer(dev); |
| |
| return rt && rt->port == lookup->port && rt->index == lookup->index; |
| } |
| |
| static struct tb_retimer *tb_port_find_retimer(struct tb_port *port, u8 index) |
| { |
| struct tb_retimer_lookup lookup = { .port = port, .index = index }; |
| struct device *dev; |
| |
| dev = device_find_child(&port->sw->dev, &lookup, retimer_match); |
| if (dev) |
| return tb_to_retimer(dev); |
| |
| return NULL; |
| } |
| |
| /** |
| * tb_retimer_scan() - Scan for on-board retimers under port |
| * @port: USB4 port to scan |
| * |
| * Tries to enumerate on-board retimers connected to @port. Found |
| * retimers are registered as children of @port. Does not scan for cable |
| * retimers for now. |
| */ |
| int tb_retimer_scan(struct tb_port *port) |
| { |
| u32 status[TB_MAX_RETIMER_INDEX] = {}; |
| int ret, i, last_idx = 0; |
| |
| if (!port->cap_usb4) |
| return 0; |
| |
| /* |
| * Send broadcast RT to make sure retimer indices facing this |
| * port are set. |
| */ |
| ret = usb4_port_enumerate_retimers(port); |
| if (ret) |
| return ret; |
| |
| /* |
| * Before doing anything else, read the authentication status. |
| * If the retimer has it set, store it for the new retimer |
| * device instance. |
| */ |
| for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++) |
| usb4_port_retimer_nvm_authenticate_status(port, i, &status[i]); |
| |
| for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++) { |
| /* |
| * Last retimer is true only for the last on-board |
| * retimer (the one connected directly to the Type-C |
| * port). |
| */ |
| ret = usb4_port_retimer_is_last(port, i); |
| if (ret > 0) |
| last_idx = i; |
| else if (ret < 0) |
| break; |
| } |
| |
| if (!last_idx) |
| return 0; |
| |
| /* Add on-board retimers if they do not exist already */ |
| for (i = 1; i <= last_idx; i++) { |
| struct tb_retimer *rt; |
| |
| rt = tb_port_find_retimer(port, i); |
| if (rt) { |
| put_device(&rt->dev); |
| } else { |
| ret = tb_retimer_add(port, i, status[i]); |
| if (ret && ret != -EOPNOTSUPP) |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int remove_retimer(struct device *dev, void *data) |
| { |
| struct tb_retimer *rt = tb_to_retimer(dev); |
| struct tb_port *port = data; |
| |
| if (rt && rt->port == port) |
| tb_retimer_remove(rt); |
| return 0; |
| } |
| |
| /** |
| * tb_retimer_remove_all() - Remove all retimers under port |
| * @port: USB4 port whose retimers to remove |
| * |
| * This removes all previously added retimers under @port. |
| */ |
| void tb_retimer_remove_all(struct tb_port *port) |
| { |
| if (port->cap_usb4) |
| device_for_each_child_reverse(&port->sw->dev, port, |
| remove_retimer); |
| } |