| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries. |
| * All rights reserved. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sdio.h> |
| #include <linux/of_irq.h> |
| |
| #include "netdev.h" |
| #include "cfg80211.h" |
| |
| #define SDIO_MODALIAS "wilc1000_sdio" |
| |
| static const struct sdio_device_id wilc_sdio_ids[] = { |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MICROCHIP_WILC, SDIO_DEVICE_ID_MICROCHIP_WILC1000) }, |
| { }, |
| }; |
| |
| #define WILC_SDIO_BLOCK_SIZE 512 |
| |
| struct wilc_sdio { |
| bool irq_gpio; |
| u32 block_size; |
| int has_thrpt_enh3; |
| }; |
| |
| struct sdio_cmd52 { |
| u32 read_write: 1; |
| u32 function: 3; |
| u32 raw: 1; |
| u32 address: 17; |
| u32 data: 8; |
| }; |
| |
| struct sdio_cmd53 { |
| u32 read_write: 1; |
| u32 function: 3; |
| u32 block_mode: 1; |
| u32 increment: 1; |
| u32 address: 17; |
| u32 count: 9; |
| u8 *buffer; |
| u32 block_size; |
| }; |
| |
| static const struct wilc_hif_func wilc_hif_sdio; |
| |
| static void wilc_sdio_interrupt(struct sdio_func *func) |
| { |
| sdio_release_host(func); |
| wilc_handle_isr(sdio_get_drvdata(func)); |
| sdio_claim_host(func); |
| } |
| |
| static int wilc_sdio_cmd52(struct wilc *wilc, struct sdio_cmd52 *cmd) |
| { |
| struct sdio_func *func = container_of(wilc->dev, struct sdio_func, dev); |
| int ret; |
| u8 data; |
| |
| sdio_claim_host(func); |
| |
| func->num = cmd->function; |
| if (cmd->read_write) { /* write */ |
| if (cmd->raw) { |
| sdio_writeb(func, cmd->data, cmd->address, &ret); |
| data = sdio_readb(func, cmd->address, &ret); |
| cmd->data = data; |
| } else { |
| sdio_writeb(func, cmd->data, cmd->address, &ret); |
| } |
| } else { /* read */ |
| data = sdio_readb(func, cmd->address, &ret); |
| cmd->data = data; |
| } |
| |
| sdio_release_host(func); |
| |
| if (ret) |
| dev_err(&func->dev, "%s..failed, err(%d)\n", __func__, ret); |
| return ret; |
| } |
| |
| static int wilc_sdio_cmd53(struct wilc *wilc, struct sdio_cmd53 *cmd) |
| { |
| struct sdio_func *func = container_of(wilc->dev, struct sdio_func, dev); |
| int size, ret; |
| |
| sdio_claim_host(func); |
| |
| func->num = cmd->function; |
| func->cur_blksize = cmd->block_size; |
| if (cmd->block_mode) |
| size = cmd->count * cmd->block_size; |
| else |
| size = cmd->count; |
| |
| if (cmd->read_write) { /* write */ |
| ret = sdio_memcpy_toio(func, cmd->address, |
| (void *)cmd->buffer, size); |
| } else { /* read */ |
| ret = sdio_memcpy_fromio(func, (void *)cmd->buffer, |
| cmd->address, size); |
| } |
| |
| sdio_release_host(func); |
| |
| if (ret) |
| dev_err(&func->dev, "%s..failed, err(%d)\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int wilc_sdio_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| struct wilc *wilc; |
| int ret; |
| struct wilc_sdio *sdio_priv; |
| |
| sdio_priv = kzalloc(sizeof(*sdio_priv), GFP_KERNEL); |
| if (!sdio_priv) |
| return -ENOMEM; |
| |
| ret = wilc_cfg80211_init(&wilc, &func->dev, WILC_HIF_SDIO, |
| &wilc_hif_sdio); |
| if (ret) |
| goto free; |
| |
| if (IS_ENABLED(CONFIG_WILC1000_HW_OOB_INTR)) { |
| struct device_node *np = func->card->dev.of_node; |
| int irq_num = of_irq_get(np, 0); |
| |
| if (irq_num > 0) { |
| wilc->dev_irq_num = irq_num; |
| sdio_priv->irq_gpio = true; |
| } |
| } |
| |
| sdio_set_drvdata(func, wilc); |
| wilc->bus_data = sdio_priv; |
| wilc->dev = &func->dev; |
| |
| wilc->rtc_clk = devm_clk_get_optional(&func->card->dev, "rtc"); |
| if (IS_ERR(wilc->rtc_clk)) { |
| ret = PTR_ERR(wilc->rtc_clk); |
| goto dispose_irq; |
| } |
| clk_prepare_enable(wilc->rtc_clk); |
| |
| dev_info(&func->dev, "Driver Initializing success\n"); |
| return 0; |
| |
| dispose_irq: |
| irq_dispose_mapping(wilc->dev_irq_num); |
| wilc_netdev_cleanup(wilc); |
| free: |
| kfree(sdio_priv); |
| return ret; |
| } |
| |
| static void wilc_sdio_remove(struct sdio_func *func) |
| { |
| struct wilc *wilc = sdio_get_drvdata(func); |
| struct wilc_sdio *sdio_priv = wilc->bus_data; |
| |
| clk_disable_unprepare(wilc->rtc_clk); |
| wilc_netdev_cleanup(wilc); |
| kfree(sdio_priv); |
| } |
| |
| static int wilc_sdio_reset(struct wilc *wilc) |
| { |
| struct sdio_cmd52 cmd; |
| int ret; |
| struct sdio_func *func = dev_to_sdio_func(wilc->dev); |
| |
| cmd.read_write = 1; |
| cmd.function = 0; |
| cmd.raw = 0; |
| cmd.address = SDIO_CCCR_ABORT; |
| cmd.data = WILC_SDIO_CCCR_ABORT_RESET; |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, "Fail cmd 52, reset cmd ...\n"); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int wilc_sdio_suspend(struct device *dev) |
| { |
| struct sdio_func *func = dev_to_sdio_func(dev); |
| struct wilc *wilc = sdio_get_drvdata(func); |
| int ret; |
| |
| dev_info(dev, "sdio suspend\n"); |
| chip_wakeup(wilc); |
| |
| if (!IS_ERR(wilc->rtc_clk)) |
| clk_disable_unprepare(wilc->rtc_clk); |
| |
| if (wilc->suspend_event) { |
| host_sleep_notify(wilc); |
| chip_allow_sleep(wilc); |
| } |
| |
| ret = wilc_sdio_reset(wilc); |
| if (ret) { |
| dev_err(&func->dev, "Fail reset sdio\n"); |
| return ret; |
| } |
| sdio_claim_host(func); |
| |
| return 0; |
| } |
| |
| static int wilc_sdio_enable_interrupt(struct wilc *dev) |
| { |
| struct sdio_func *func = container_of(dev->dev, struct sdio_func, dev); |
| int ret = 0; |
| |
| sdio_claim_host(func); |
| ret = sdio_claim_irq(func, wilc_sdio_interrupt); |
| sdio_release_host(func); |
| |
| if (ret < 0) { |
| dev_err(&func->dev, "can't claim sdio_irq, err(%d)\n", ret); |
| ret = -EIO; |
| } |
| return ret; |
| } |
| |
| static void wilc_sdio_disable_interrupt(struct wilc *dev) |
| { |
| struct sdio_func *func = container_of(dev->dev, struct sdio_func, dev); |
| int ret; |
| |
| sdio_claim_host(func); |
| ret = sdio_release_irq(func); |
| if (ret < 0) |
| dev_err(&func->dev, "can't release sdio_irq, err(%d)\n", ret); |
| sdio_release_host(func); |
| } |
| |
| /******************************************** |
| * |
| * Function 0 |
| * |
| ********************************************/ |
| |
| static int wilc_sdio_set_func0_csa_address(struct wilc *wilc, u32 adr) |
| { |
| struct sdio_func *func = dev_to_sdio_func(wilc->dev); |
| struct sdio_cmd52 cmd; |
| int ret; |
| |
| /** |
| * Review: BIG ENDIAN |
| **/ |
| cmd.read_write = 1; |
| cmd.function = 0; |
| cmd.raw = 0; |
| cmd.address = WILC_SDIO_FBR_CSA_REG; |
| cmd.data = (u8)adr; |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, "Failed cmd52, set %04x data...\n", |
| cmd.address); |
| return ret; |
| } |
| |
| cmd.address = WILC_SDIO_FBR_CSA_REG + 1; |
| cmd.data = (u8)(adr >> 8); |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, "Failed cmd52, set %04x data...\n", |
| cmd.address); |
| return ret; |
| } |
| |
| cmd.address = WILC_SDIO_FBR_CSA_REG + 2; |
| cmd.data = (u8)(adr >> 16); |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, "Failed cmd52, set %04x data...\n", |
| cmd.address); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int wilc_sdio_set_block_size(struct wilc *wilc, u8 func_num, |
| u32 block_size) |
| { |
| struct sdio_func *func = dev_to_sdio_func(wilc->dev); |
| struct sdio_cmd52 cmd; |
| int ret; |
| |
| cmd.read_write = 1; |
| cmd.function = 0; |
| cmd.raw = 0; |
| cmd.address = SDIO_FBR_BASE(func_num) + SDIO_CCCR_BLKSIZE; |
| cmd.data = (u8)block_size; |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, "Failed cmd52, set %04x data...\n", |
| cmd.address); |
| return ret; |
| } |
| |
| cmd.address = SDIO_FBR_BASE(func_num) + SDIO_CCCR_BLKSIZE + 1; |
| cmd.data = (u8)(block_size >> 8); |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, "Failed cmd52, set %04x data...\n", |
| cmd.address); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /******************************************** |
| * |
| * Sdio interfaces |
| * |
| ********************************************/ |
| static int wilc_sdio_write_reg(struct wilc *wilc, u32 addr, u32 data) |
| { |
| struct sdio_func *func = dev_to_sdio_func(wilc->dev); |
| struct wilc_sdio *sdio_priv = wilc->bus_data; |
| int ret; |
| |
| cpu_to_le32s(&data); |
| |
| if (addr >= 0xf0 && addr <= 0xff) { /* only vendor specific registers */ |
| struct sdio_cmd52 cmd; |
| |
| cmd.read_write = 1; |
| cmd.function = 0; |
| cmd.raw = 0; |
| cmd.address = addr; |
| cmd.data = data; |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) |
| dev_err(&func->dev, |
| "Failed cmd 52, read reg (%08x) ...\n", addr); |
| } else { |
| struct sdio_cmd53 cmd; |
| |
| /** |
| * set the AHB address |
| **/ |
| ret = wilc_sdio_set_func0_csa_address(wilc, addr); |
| if (ret) |
| return ret; |
| |
| cmd.read_write = 1; |
| cmd.function = 0; |
| cmd.address = WILC_SDIO_FBR_DATA_REG; |
| cmd.block_mode = 0; |
| cmd.increment = 1; |
| cmd.count = 4; |
| cmd.buffer = (u8 *)&data; |
| cmd.block_size = sdio_priv->block_size; |
| ret = wilc_sdio_cmd53(wilc, &cmd); |
| if (ret) |
| dev_err(&func->dev, |
| "Failed cmd53, write reg (%08x)...\n", addr); |
| } |
| |
| return ret; |
| } |
| |
| static int wilc_sdio_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size) |
| { |
| struct sdio_func *func = dev_to_sdio_func(wilc->dev); |
| struct wilc_sdio *sdio_priv = wilc->bus_data; |
| u32 block_size = sdio_priv->block_size; |
| struct sdio_cmd53 cmd; |
| int nblk, nleft, ret; |
| |
| cmd.read_write = 1; |
| if (addr > 0) { |
| /** |
| * func 0 access |
| **/ |
| cmd.function = 0; |
| cmd.address = WILC_SDIO_FBR_DATA_REG; |
| } else { |
| /** |
| * func 1 access |
| **/ |
| cmd.function = 1; |
| cmd.address = WILC_SDIO_F1_DATA_REG; |
| } |
| |
| size = ALIGN(size, 4); |
| nblk = size / block_size; |
| nleft = size % block_size; |
| |
| if (nblk > 0) { |
| cmd.block_mode = 1; |
| cmd.increment = 1; |
| cmd.count = nblk; |
| cmd.buffer = buf; |
| cmd.block_size = block_size; |
| if (addr > 0) { |
| ret = wilc_sdio_set_func0_csa_address(wilc, addr); |
| if (ret) |
| return ret; |
| } |
| ret = wilc_sdio_cmd53(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, |
| "Failed cmd53 [%x], block send...\n", addr); |
| return ret; |
| } |
| if (addr > 0) |
| addr += nblk * block_size; |
| buf += nblk * block_size; |
| } |
| |
| if (nleft > 0) { |
| cmd.block_mode = 0; |
| cmd.increment = 1; |
| cmd.count = nleft; |
| cmd.buffer = buf; |
| |
| cmd.block_size = block_size; |
| |
| if (addr > 0) { |
| ret = wilc_sdio_set_func0_csa_address(wilc, addr); |
| if (ret) |
| return ret; |
| } |
| ret = wilc_sdio_cmd53(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, |
| "Failed cmd53 [%x], bytes send...\n", addr); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int wilc_sdio_read_reg(struct wilc *wilc, u32 addr, u32 *data) |
| { |
| struct sdio_func *func = dev_to_sdio_func(wilc->dev); |
| struct wilc_sdio *sdio_priv = wilc->bus_data; |
| int ret; |
| |
| if (addr >= 0xf0 && addr <= 0xff) { /* only vendor specific registers */ |
| struct sdio_cmd52 cmd; |
| |
| cmd.read_write = 0; |
| cmd.function = 0; |
| cmd.raw = 0; |
| cmd.address = addr; |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, |
| "Failed cmd 52, read reg (%08x) ...\n", addr); |
| return ret; |
| } |
| *data = cmd.data; |
| } else { |
| struct sdio_cmd53 cmd; |
| |
| ret = wilc_sdio_set_func0_csa_address(wilc, addr); |
| if (ret) |
| return ret; |
| |
| cmd.read_write = 0; |
| cmd.function = 0; |
| cmd.address = WILC_SDIO_FBR_DATA_REG; |
| cmd.block_mode = 0; |
| cmd.increment = 1; |
| cmd.count = 4; |
| cmd.buffer = (u8 *)data; |
| |
| cmd.block_size = sdio_priv->block_size; |
| ret = wilc_sdio_cmd53(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, |
| "Failed cmd53, read reg (%08x)...\n", addr); |
| return ret; |
| } |
| } |
| |
| le32_to_cpus(data); |
| return 0; |
| } |
| |
| static int wilc_sdio_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size) |
| { |
| struct sdio_func *func = dev_to_sdio_func(wilc->dev); |
| struct wilc_sdio *sdio_priv = wilc->bus_data; |
| u32 block_size = sdio_priv->block_size; |
| struct sdio_cmd53 cmd; |
| int nblk, nleft, ret; |
| |
| cmd.read_write = 0; |
| if (addr > 0) { |
| /** |
| * func 0 access |
| **/ |
| cmd.function = 0; |
| cmd.address = WILC_SDIO_FBR_DATA_REG; |
| } else { |
| /** |
| * func 1 access |
| **/ |
| cmd.function = 1; |
| cmd.address = WILC_SDIO_F1_DATA_REG; |
| } |
| |
| size = ALIGN(size, 4); |
| nblk = size / block_size; |
| nleft = size % block_size; |
| |
| if (nblk > 0) { |
| cmd.block_mode = 1; |
| cmd.increment = 1; |
| cmd.count = nblk; |
| cmd.buffer = buf; |
| cmd.block_size = block_size; |
| if (addr > 0) { |
| ret = wilc_sdio_set_func0_csa_address(wilc, addr); |
| if (ret) |
| return ret; |
| } |
| ret = wilc_sdio_cmd53(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, |
| "Failed cmd53 [%x], block read...\n", addr); |
| return ret; |
| } |
| if (addr > 0) |
| addr += nblk * block_size; |
| buf += nblk * block_size; |
| } /* if (nblk > 0) */ |
| |
| if (nleft > 0) { |
| cmd.block_mode = 0; |
| cmd.increment = 1; |
| cmd.count = nleft; |
| cmd.buffer = buf; |
| |
| cmd.block_size = block_size; |
| |
| if (addr > 0) { |
| ret = wilc_sdio_set_func0_csa_address(wilc, addr); |
| if (ret) |
| return ret; |
| } |
| ret = wilc_sdio_cmd53(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, |
| "Failed cmd53 [%x], bytes read...\n", addr); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /******************************************** |
| * |
| * Bus interfaces |
| * |
| ********************************************/ |
| |
| static int wilc_sdio_deinit(struct wilc *wilc) |
| { |
| return 0; |
| } |
| |
| static int wilc_sdio_init(struct wilc *wilc, bool resume) |
| { |
| struct sdio_func *func = dev_to_sdio_func(wilc->dev); |
| struct wilc_sdio *sdio_priv = wilc->bus_data; |
| struct sdio_cmd52 cmd; |
| int loop, ret; |
| u32 chipid; |
| |
| /** |
| * function 0 csa enable |
| **/ |
| cmd.read_write = 1; |
| cmd.function = 0; |
| cmd.raw = 1; |
| cmd.address = SDIO_FBR_BASE(func->num); |
| cmd.data = SDIO_FBR_ENABLE_CSA; |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, "Fail cmd 52, enable csa...\n"); |
| return ret; |
| } |
| |
| /** |
| * function 0 block size |
| **/ |
| ret = wilc_sdio_set_block_size(wilc, 0, WILC_SDIO_BLOCK_SIZE); |
| if (ret) { |
| dev_err(&func->dev, "Fail cmd 52, set func 0 block size...\n"); |
| return ret; |
| } |
| sdio_priv->block_size = WILC_SDIO_BLOCK_SIZE; |
| |
| /** |
| * enable func1 IO |
| **/ |
| cmd.read_write = 1; |
| cmd.function = 0; |
| cmd.raw = 1; |
| cmd.address = SDIO_CCCR_IOEx; |
| cmd.data = WILC_SDIO_CCCR_IO_EN_FUNC1; |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, |
| "Fail cmd 52, set IOE register...\n"); |
| return ret; |
| } |
| |
| /** |
| * make sure func 1 is up |
| **/ |
| cmd.read_write = 0; |
| cmd.function = 0; |
| cmd.raw = 0; |
| cmd.address = SDIO_CCCR_IORx; |
| loop = 3; |
| do { |
| cmd.data = 0; |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, |
| "Fail cmd 52, get IOR register...\n"); |
| return ret; |
| } |
| if (cmd.data == WILC_SDIO_CCCR_IO_EN_FUNC1) |
| break; |
| } while (loop--); |
| |
| if (loop <= 0) { |
| dev_err(&func->dev, "Fail func 1 is not ready...\n"); |
| return -EINVAL; |
| } |
| |
| /** |
| * func 1 is ready, set func 1 block size |
| **/ |
| ret = wilc_sdio_set_block_size(wilc, 1, WILC_SDIO_BLOCK_SIZE); |
| if (ret) { |
| dev_err(&func->dev, "Fail set func 1 block size...\n"); |
| return ret; |
| } |
| |
| /** |
| * func 1 interrupt enable |
| **/ |
| cmd.read_write = 1; |
| cmd.function = 0; |
| cmd.raw = 1; |
| cmd.address = SDIO_CCCR_IENx; |
| cmd.data = WILC_SDIO_CCCR_IEN_MASTER | WILC_SDIO_CCCR_IEN_FUNC1; |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, "Fail cmd 52, set IEN register...\n"); |
| return ret; |
| } |
| |
| /** |
| * make sure can read back chip id correctly |
| **/ |
| if (!resume) { |
| int rev; |
| |
| ret = wilc_sdio_read_reg(wilc, WILC_CHIPID, &chipid); |
| if (ret) { |
| dev_err(&func->dev, "Fail cmd read chip id...\n"); |
| return ret; |
| } |
| dev_err(&func->dev, "chipid (%08x)\n", chipid); |
| rev = FIELD_GET(WILC_CHIP_REV_FIELD, chipid); |
| if (rev > FIELD_GET(WILC_CHIP_REV_FIELD, WILC_1000_BASE_ID_2A)) |
| sdio_priv->has_thrpt_enh3 = 1; |
| else |
| sdio_priv->has_thrpt_enh3 = 0; |
| dev_info(&func->dev, "has_thrpt_enh3 = %d...\n", |
| sdio_priv->has_thrpt_enh3); |
| } |
| |
| return 0; |
| } |
| |
| static int wilc_sdio_read_size(struct wilc *wilc, u32 *size) |
| { |
| u32 tmp; |
| struct sdio_cmd52 cmd; |
| |
| /** |
| * Read DMA count in words |
| **/ |
| cmd.read_write = 0; |
| cmd.function = 0; |
| cmd.raw = 0; |
| cmd.address = WILC_SDIO_INTERRUPT_DATA_SZ_REG; |
| cmd.data = 0; |
| wilc_sdio_cmd52(wilc, &cmd); |
| tmp = cmd.data; |
| |
| cmd.address = WILC_SDIO_INTERRUPT_DATA_SZ_REG + 1; |
| cmd.data = 0; |
| wilc_sdio_cmd52(wilc, &cmd); |
| tmp |= (cmd.data << 8); |
| |
| *size = tmp; |
| return 0; |
| } |
| |
| static int wilc_sdio_read_int(struct wilc *wilc, u32 *int_status) |
| { |
| struct sdio_func *func = dev_to_sdio_func(wilc->dev); |
| struct wilc_sdio *sdio_priv = wilc->bus_data; |
| u32 tmp; |
| u8 irq_flags; |
| struct sdio_cmd52 cmd; |
| |
| wilc_sdio_read_size(wilc, &tmp); |
| |
| /** |
| * Read IRQ flags |
| **/ |
| if (!sdio_priv->irq_gpio) { |
| cmd.function = 1; |
| cmd.address = WILC_SDIO_EXT_IRQ_FLAG_REG; |
| } else { |
| cmd.function = 0; |
| cmd.address = WILC_SDIO_IRQ_FLAG_REG; |
| } |
| cmd.raw = 0; |
| cmd.read_write = 0; |
| cmd.data = 0; |
| wilc_sdio_cmd52(wilc, &cmd); |
| irq_flags = cmd.data; |
| tmp |= FIELD_PREP(IRG_FLAGS_MASK, cmd.data); |
| |
| if (FIELD_GET(UNHANDLED_IRQ_MASK, irq_flags)) |
| dev_err(&func->dev, "Unexpected interrupt (1) int=%lx\n", |
| FIELD_GET(UNHANDLED_IRQ_MASK, irq_flags)); |
| |
| *int_status = tmp; |
| |
| return 0; |
| } |
| |
| static int wilc_sdio_clear_int_ext(struct wilc *wilc, u32 val) |
| { |
| struct sdio_func *func = dev_to_sdio_func(wilc->dev); |
| struct wilc_sdio *sdio_priv = wilc->bus_data; |
| int ret; |
| int vmm_ctl; |
| |
| if (sdio_priv->has_thrpt_enh3) { |
| u32 reg = 0; |
| |
| if (sdio_priv->irq_gpio) |
| reg = val & (BIT(MAX_NUM_INT) - 1); |
| |
| /* select VMM table 0 */ |
| if (val & SEL_VMM_TBL0) |
| reg |= BIT(5); |
| /* select VMM table 1 */ |
| if (val & SEL_VMM_TBL1) |
| reg |= BIT(6); |
| /* enable VMM */ |
| if (val & EN_VMM) |
| reg |= BIT(7); |
| if (reg) { |
| struct sdio_cmd52 cmd; |
| |
| cmd.read_write = 1; |
| cmd.function = 0; |
| cmd.raw = 0; |
| cmd.address = WILC_SDIO_IRQ_CLEAR_FLAG_REG; |
| cmd.data = reg; |
| |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, |
| "Failed cmd52, set (%02x) data (%d) ...\n", |
| cmd.address, __LINE__); |
| return ret; |
| } |
| } |
| return 0; |
| } |
| if (sdio_priv->irq_gpio) { |
| /* has_thrpt_enh2 uses register 0xf8 to clear interrupts. */ |
| /* |
| * Cannot clear multiple interrupts. |
| * Must clear each interrupt individually. |
| */ |
| u32 flags; |
| int i; |
| |
| flags = val & (BIT(MAX_NUM_INT) - 1); |
| for (i = 0; i < NUM_INT_EXT && flags; i++) { |
| if (flags & BIT(i)) { |
| struct sdio_cmd52 cmd; |
| |
| cmd.read_write = 1; |
| cmd.function = 0; |
| cmd.raw = 0; |
| cmd.address = WILC_SDIO_IRQ_CLEAR_FLAG_REG; |
| cmd.data = BIT(i); |
| |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, |
| "Failed cmd52, set (%02x) data (%d) ...\n", |
| cmd.address, __LINE__); |
| return ret; |
| } |
| flags &= ~BIT(i); |
| } |
| } |
| |
| for (i = NUM_INT_EXT; i < MAX_NUM_INT && flags; i++) { |
| if (flags & BIT(i)) { |
| dev_err(&func->dev, |
| "Unexpected interrupt cleared %d...\n", |
| i); |
| flags &= ~BIT(i); |
| } |
| } |
| } |
| |
| vmm_ctl = 0; |
| /* select VMM table 0 */ |
| if (val & SEL_VMM_TBL0) |
| vmm_ctl |= BIT(0); |
| /* select VMM table 1 */ |
| if (val & SEL_VMM_TBL1) |
| vmm_ctl |= BIT(1); |
| /* enable VMM */ |
| if (val & EN_VMM) |
| vmm_ctl |= BIT(2); |
| |
| if (vmm_ctl) { |
| struct sdio_cmd52 cmd; |
| |
| cmd.read_write = 1; |
| cmd.function = 0; |
| cmd.raw = 0; |
| cmd.address = WILC_SDIO_VMM_TBL_CTRL_REG; |
| cmd.data = vmm_ctl; |
| ret = wilc_sdio_cmd52(wilc, &cmd); |
| if (ret) { |
| dev_err(&func->dev, |
| "Failed cmd52, set (%02x) data (%d) ...\n", |
| cmd.address, __LINE__); |
| return ret; |
| } |
| } |
| return 0; |
| } |
| |
| static int wilc_sdio_sync_ext(struct wilc *wilc, int nint) |
| { |
| struct sdio_func *func = dev_to_sdio_func(wilc->dev); |
| struct wilc_sdio *sdio_priv = wilc->bus_data; |
| u32 reg; |
| |
| if (nint > MAX_NUM_INT) { |
| dev_err(&func->dev, "Too many interrupts (%d)...\n", nint); |
| return -EINVAL; |
| } |
| |
| /** |
| * Disable power sequencer |
| **/ |
| if (wilc_sdio_read_reg(wilc, WILC_MISC, ®)) { |
| dev_err(&func->dev, "Failed read misc reg...\n"); |
| return -EINVAL; |
| } |
| |
| reg &= ~BIT(8); |
| if (wilc_sdio_write_reg(wilc, WILC_MISC, reg)) { |
| dev_err(&func->dev, "Failed write misc reg...\n"); |
| return -EINVAL; |
| } |
| |
| if (sdio_priv->irq_gpio) { |
| u32 reg; |
| int ret, i; |
| |
| /** |
| * interrupt pin mux select |
| **/ |
| ret = wilc_sdio_read_reg(wilc, WILC_PIN_MUX_0, ®); |
| if (ret) { |
| dev_err(&func->dev, "Failed read reg (%08x)...\n", |
| WILC_PIN_MUX_0); |
| return ret; |
| } |
| reg |= BIT(8); |
| ret = wilc_sdio_write_reg(wilc, WILC_PIN_MUX_0, reg); |
| if (ret) { |
| dev_err(&func->dev, "Failed write reg (%08x)...\n", |
| WILC_PIN_MUX_0); |
| return ret; |
| } |
| |
| /** |
| * interrupt enable |
| **/ |
| ret = wilc_sdio_read_reg(wilc, WILC_INTR_ENABLE, ®); |
| if (ret) { |
| dev_err(&func->dev, "Failed read reg (%08x)...\n", |
| WILC_INTR_ENABLE); |
| return ret; |
| } |
| |
| for (i = 0; (i < 5) && (nint > 0); i++, nint--) |
| reg |= BIT((27 + i)); |
| ret = wilc_sdio_write_reg(wilc, WILC_INTR_ENABLE, reg); |
| if (ret) { |
| dev_err(&func->dev, "Failed write reg (%08x)...\n", |
| WILC_INTR_ENABLE); |
| return ret; |
| } |
| if (nint) { |
| ret = wilc_sdio_read_reg(wilc, WILC_INTR2_ENABLE, ®); |
| if (ret) { |
| dev_err(&func->dev, |
| "Failed read reg (%08x)...\n", |
| WILC_INTR2_ENABLE); |
| return ret; |
| } |
| |
| for (i = 0; (i < 3) && (nint > 0); i++, nint--) |
| reg |= BIT(i); |
| |
| ret = wilc_sdio_write_reg(wilc, WILC_INTR2_ENABLE, reg); |
| if (ret) { |
| dev_err(&func->dev, |
| "Failed write reg (%08x)...\n", |
| WILC_INTR2_ENABLE); |
| return ret; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| /* Global sdio HIF function table */ |
| static const struct wilc_hif_func wilc_hif_sdio = { |
| .hif_init = wilc_sdio_init, |
| .hif_deinit = wilc_sdio_deinit, |
| .hif_read_reg = wilc_sdio_read_reg, |
| .hif_write_reg = wilc_sdio_write_reg, |
| .hif_block_rx = wilc_sdio_read, |
| .hif_block_tx = wilc_sdio_write, |
| .hif_read_int = wilc_sdio_read_int, |
| .hif_clear_int_ext = wilc_sdio_clear_int_ext, |
| .hif_read_size = wilc_sdio_read_size, |
| .hif_block_tx_ext = wilc_sdio_write, |
| .hif_block_rx_ext = wilc_sdio_read, |
| .hif_sync_ext = wilc_sdio_sync_ext, |
| .enable_interrupt = wilc_sdio_enable_interrupt, |
| .disable_interrupt = wilc_sdio_disable_interrupt, |
| .hif_reset = wilc_sdio_reset, |
| }; |
| |
| static int wilc_sdio_resume(struct device *dev) |
| { |
| struct sdio_func *func = dev_to_sdio_func(dev); |
| struct wilc *wilc = sdio_get_drvdata(func); |
| |
| dev_info(dev, "sdio resume\n"); |
| sdio_release_host(func); |
| chip_wakeup(wilc); |
| wilc_sdio_init(wilc, true); |
| |
| if (wilc->suspend_event) |
| host_wakeup_notify(wilc); |
| |
| chip_allow_sleep(wilc); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id wilc_of_match[] = { |
| { .compatible = "microchip,wilc1000", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, wilc_of_match); |
| |
| static const struct dev_pm_ops wilc_sdio_pm_ops = { |
| .suspend = wilc_sdio_suspend, |
| .resume = wilc_sdio_resume, |
| }; |
| |
| static struct sdio_driver wilc_sdio_driver = { |
| .name = SDIO_MODALIAS, |
| .id_table = wilc_sdio_ids, |
| .probe = wilc_sdio_probe, |
| .remove = wilc_sdio_remove, |
| .drv = { |
| .pm = &wilc_sdio_pm_ops, |
| .of_match_table = wilc_of_match, |
| } |
| }; |
| module_driver(wilc_sdio_driver, |
| sdio_register_driver, |
| sdio_unregister_driver); |
| MODULE_LICENSE("GPL"); |