| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * OF helpers for network devices. |
| * |
| * Initially copied out of arch/powerpc/kernel/prom_parse.c |
| */ |
| #include <linux/etherdevice.h> |
| #include <linux/kernel.h> |
| #include <linux/of_net.h> |
| #include <linux/of_platform.h> |
| #include <linux/phy.h> |
| #include <linux/export.h> |
| #include <linux/device.h> |
| #include <linux/nvmem-consumer.h> |
| |
| /** |
| * of_get_phy_mode - Get phy mode for given device_node |
| * @np: Pointer to the given device_node |
| * @interface: Pointer to the result |
| * |
| * The function gets phy interface string from property 'phy-mode' or |
| * 'phy-connection-type'. The index in phy_modes table is set in |
| * interface and 0 returned. In case of error interface is set to |
| * PHY_INTERFACE_MODE_NA and an errno is returned, e.g. -ENODEV. |
| */ |
| int of_get_phy_mode(struct device_node *np, phy_interface_t *interface) |
| { |
| const char *pm; |
| int err, i; |
| |
| *interface = PHY_INTERFACE_MODE_NA; |
| |
| err = of_property_read_string(np, "phy-mode", &pm); |
| if (err < 0) |
| err = of_property_read_string(np, "phy-connection-type", &pm); |
| if (err < 0) |
| return err; |
| |
| for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++) |
| if (!strcasecmp(pm, phy_modes(i))) { |
| *interface = i; |
| return 0; |
| } |
| |
| return -ENODEV; |
| } |
| EXPORT_SYMBOL_GPL(of_get_phy_mode); |
| |
| static int of_get_mac_addr(struct device_node *np, const char *name, u8 *addr) |
| { |
| struct property *pp = of_find_property(np, name, NULL); |
| |
| if (pp && pp->length == ETH_ALEN && is_valid_ether_addr(pp->value)) { |
| memcpy(addr, pp->value, ETH_ALEN); |
| return 0; |
| } |
| return -ENODEV; |
| } |
| |
| static int of_get_mac_addr_nvmem(struct device_node *np, u8 *addr) |
| { |
| struct platform_device *pdev = of_find_device_by_node(np); |
| struct nvmem_cell *cell; |
| const void *buf; |
| size_t len; |
| int ret; |
| |
| /* Try lookup by device first, there might be a nvmem_cell_lookup |
| * associated with a given device. |
| */ |
| if (pdev) { |
| ret = nvmem_get_mac_address(&pdev->dev, addr); |
| put_device(&pdev->dev); |
| return ret; |
| } |
| |
| cell = of_nvmem_cell_get(np, "mac-address"); |
| if (IS_ERR(cell)) |
| return PTR_ERR(cell); |
| |
| buf = nvmem_cell_read(cell, &len); |
| nvmem_cell_put(cell); |
| |
| if (IS_ERR(buf)) |
| return PTR_ERR(buf); |
| |
| ret = 0; |
| if (len == ETH_ALEN) { |
| if (is_valid_ether_addr(buf)) |
| memcpy(addr, buf, ETH_ALEN); |
| else |
| ret = -EINVAL; |
| } else if (len == 3 * ETH_ALEN - 1) { |
| u8 mac[ETH_ALEN]; |
| |
| if (mac_pton(buf, mac)) |
| memcpy(addr, mac, ETH_ALEN); |
| else |
| ret = -EINVAL; |
| } else { |
| ret = -EINVAL; |
| } |
| |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| /** |
| * of_get_mac_address() |
| * @np: Caller's Device Node |
| * @addr: Pointer to a six-byte array for the result |
| * |
| * Search the device tree for the best MAC address to use. 'mac-address' is |
| * checked first, because that is supposed to contain to "most recent" MAC |
| * address. If that isn't set, then 'local-mac-address' is checked next, |
| * because that is the default address. If that isn't set, then the obsolete |
| * 'address' is checked, just in case we're using an old device tree. If any |
| * of the above isn't set, then try to get MAC address from nvmem cell named |
| * 'mac-address'. |
| * |
| * Note that the 'address' property is supposed to contain a virtual address of |
| * the register set, but some DTS files have redefined that property to be the |
| * MAC address. |
| * |
| * All-zero MAC addresses are rejected, because those could be properties that |
| * exist in the device tree, but were not set by U-Boot. For example, the |
| * DTS could define 'mac-address' and 'local-mac-address', with zero MAC |
| * addresses. Some older U-Boots only initialized 'local-mac-address'. In |
| * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists |
| * but is all zeros. |
| * |
| * Return: 0 on success and errno in case of error. |
| */ |
| int of_get_mac_address(struct device_node *np, u8 *addr) |
| { |
| int ret; |
| |
| if (!np) |
| return -ENODEV; |
| |
| ret = of_get_mac_addr(np, "mac-address", addr); |
| if (!ret) |
| return 0; |
| |
| ret = of_get_mac_addr(np, "local-mac-address", addr); |
| if (!ret) |
| return 0; |
| |
| ret = of_get_mac_addr(np, "address", addr); |
| if (!ret) |
| return 0; |
| |
| return of_get_mac_addr_nvmem(np, addr); |
| } |
| EXPORT_SYMBOL(of_get_mac_address); |
| |
| /** |
| * of_get_ethdev_address() |
| * @np: Caller's Device Node |
| * @dev: Pointer to netdevice which address will be updated |
| * |
| * Search the device tree for the best MAC address to use. |
| * If found set @dev->dev_addr to that address. |
| * |
| * See documentation of of_get_mac_address() for more information on how |
| * the best address is determined. |
| * |
| * Return: 0 on success and errno in case of error. |
| */ |
| int of_get_ethdev_address(struct device_node *np, struct net_device *dev) |
| { |
| u8 addr[ETH_ALEN]; |
| int ret; |
| |
| ret = of_get_mac_address(np, addr); |
| if (!ret) |
| eth_hw_addr_set(dev, addr); |
| return ret; |
| } |
| EXPORT_SYMBOL(of_get_ethdev_address); |