| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * Samsung S5P/Exynos4 SoC series camera interface driver header |
| * |
| * Copyright (C) 2010 - 2013 Samsung Electronics Co., Ltd. |
| * Sylwester Nawrocki <s.nawrocki@samsung.com> |
| */ |
| |
| #ifndef S5P_FIMC_H_ |
| #define S5P_FIMC_H_ |
| |
| #include <media/media-entity.h> |
| #include <media/v4l2-dev.h> |
| #include <media/v4l2-mediabus.h> |
| |
| /* |
| * Enumeration of data inputs to the camera subsystem. |
| */ |
| enum fimc_input { |
| FIMC_INPUT_PARALLEL_0 = 1, |
| FIMC_INPUT_PARALLEL_1, |
| FIMC_INPUT_MIPI_CSI2_0 = 3, |
| FIMC_INPUT_MIPI_CSI2_1, |
| FIMC_INPUT_WRITEBACK_A = 5, |
| FIMC_INPUT_WRITEBACK_B, |
| FIMC_INPUT_WRITEBACK_ISP = 5, |
| }; |
| |
| /* |
| * Enumeration of the FIMC data bus types. |
| */ |
| enum fimc_bus_type { |
| /* Camera parallel bus */ |
| FIMC_BUS_TYPE_ITU_601 = 1, |
| /* Camera parallel bus with embedded synchronization */ |
| FIMC_BUS_TYPE_ITU_656, |
| /* Camera MIPI-CSI2 serial bus */ |
| FIMC_BUS_TYPE_MIPI_CSI2, |
| /* FIFO link from LCD controller (WriteBack A) */ |
| FIMC_BUS_TYPE_LCD_WRITEBACK_A, |
| /* FIFO link from LCD controller (WriteBack B) */ |
| FIMC_BUS_TYPE_LCD_WRITEBACK_B, |
| /* FIFO link from FIMC-IS */ |
| FIMC_BUS_TYPE_ISP_WRITEBACK = FIMC_BUS_TYPE_LCD_WRITEBACK_B, |
| }; |
| |
| #define fimc_input_is_parallel(x) ((x) == 1 || (x) == 2) |
| #define fimc_input_is_mipi_csi(x) ((x) == 3 || (x) == 4) |
| |
| /* |
| * The subdevices' group IDs. |
| */ |
| #define GRP_ID_SENSOR (1 << 8) |
| #define GRP_ID_FIMC_IS_SENSOR (1 << 9) |
| #define GRP_ID_WRITEBACK (1 << 10) |
| #define GRP_ID_CSIS (1 << 11) |
| #define GRP_ID_FIMC (1 << 12) |
| #define GRP_ID_FLITE (1 << 13) |
| #define GRP_ID_FIMC_IS (1 << 14) |
| |
| /** |
| * struct fimc_source_info - video source description required for the host |
| * interface configuration |
| * |
| * @fimc_bus_type: FIMC camera input type |
| * @sensor_bus_type: image sensor bus type, MIPI, ITU-R BT.601 etc. |
| * @flags: the parallel sensor bus flags defining signals polarity (V4L2_MBUS_*) |
| * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU) |
| */ |
| struct fimc_source_info { |
| enum fimc_bus_type fimc_bus_type; |
| enum fimc_bus_type sensor_bus_type; |
| u16 flags; |
| u16 mux_id; |
| }; |
| |
| /* |
| * v4l2_device notification id. This is only for internal use in the kernel. |
| * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single |
| * frame capture mode when there is only one VSYNC pulse issued by the sensor |
| * at beginning of the frame transmission. |
| */ |
| #define S5P_FIMC_TX_END_NOTIFY _IO('e', 0) |
| |
| #define FIMC_MAX_PLANES 3 |
| |
| /** |
| * struct fimc_fmt - color format data structure |
| * @mbus_code: media bus pixel code, -1 if not applicable |
| * @name: format description |
| * @fourcc: fourcc code for this format, 0 if not applicable |
| * @color: the driver's private color format id |
| * @memplanes: number of physically non-contiguous data planes |
| * @colplanes: number of physically contiguous data planes |
| * @colorspace: v4l2 colorspace (V4L2_COLORSPACE_*) |
| * @depth: per plane driver's private 'number of bits per pixel' |
| * @mdataplanes: bitmask indicating meta data plane(s), (1 << plane_no) |
| * @flags: flags indicating which operation mode format applies to |
| */ |
| struct fimc_fmt { |
| u32 mbus_code; |
| char *name; |
| u32 fourcc; |
| u32 color; |
| u16 memplanes; |
| u16 colplanes; |
| u8 colorspace; |
| u8 depth[FIMC_MAX_PLANES]; |
| u16 mdataplanes; |
| u16 flags; |
| #define FMT_FLAGS_CAM (1 << 0) |
| #define FMT_FLAGS_M2M_IN (1 << 1) |
| #define FMT_FLAGS_M2M_OUT (1 << 2) |
| #define FMT_FLAGS_M2M (1 << 1 | 1 << 2) |
| #define FMT_HAS_ALPHA (1 << 3) |
| #define FMT_FLAGS_COMPRESSED (1 << 4) |
| #define FMT_FLAGS_WRITEBACK (1 << 5) |
| #define FMT_FLAGS_RAW_BAYER (1 << 6) |
| #define FMT_FLAGS_YUV (1 << 7) |
| }; |
| |
| struct exynos_media_pipeline; |
| |
| /* |
| * Media pipeline operations to be called from within a video node, i.e. the |
| * last entity within the pipeline. Implemented by related media device driver. |
| */ |
| struct exynos_media_pipeline_ops { |
| int (*prepare)(struct exynos_media_pipeline *p, |
| struct media_entity *me); |
| int (*unprepare)(struct exynos_media_pipeline *p); |
| int (*open)(struct exynos_media_pipeline *p, struct media_entity *me, |
| bool resume); |
| int (*close)(struct exynos_media_pipeline *p); |
| int (*set_stream)(struct exynos_media_pipeline *p, bool state); |
| }; |
| |
| struct exynos_video_entity { |
| struct video_device vdev; |
| struct exynos_media_pipeline *pipe; |
| }; |
| |
| struct exynos_media_pipeline { |
| struct media_pipeline mp; |
| const struct exynos_media_pipeline_ops *ops; |
| }; |
| |
| static inline struct exynos_video_entity *vdev_to_exynos_video_entity( |
| struct video_device *vdev) |
| { |
| return container_of(vdev, struct exynos_video_entity, vdev); |
| } |
| |
| #define fimc_pipeline_call(ent, op, args...) \ |
| ((!(ent) || !(ent)->pipe) ? -ENOENT : \ |
| (((ent)->pipe->ops && (ent)->pipe->ops->op) ? \ |
| (ent)->pipe->ops->op(((ent)->pipe), ##args) : -ENOIOCTLCMD)) \ |
| |
| #endif /* S5P_FIMC_H_ */ |