blob: 64b3357ade8a0c543f0b5f78e02e2e66339a6e72 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0+
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/qca,ar803x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Atheros AR803x PHY
maintainers:
- Andrew Lunn <andrew@lunn.ch>
- Florian Fainelli <f.fainelli@gmail.com>
- Heiner Kallweit <hkallweit1@gmail.com>
description: |
Bindings for Qualcomm Atheros AR803x PHYs
allOf:
- $ref: ethernet-phy.yaml#
properties:
qca,clk-out-frequency:
description: Clock output frequency in Hertz.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [25000000, 50000000, 62500000, 125000000]
qca,clk-out-strength:
description: Clock output driver strength.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
qca,keep-pll-enabled:
description: |
If set, keep the PLL enabled even if there is no link. Useful if you
want to use the clock output without an ethernet link.
Only supported on the AR8031.
type: boolean
vddio-supply:
description: |
RGMII I/O voltage regulator (see regulator/regulator.yaml).
The PHY supports RGMII I/O voltages of 1.5V, 1.8V and 2.5V. You can
either connect this to the vddio-regulator (1.5V / 1.8V) or the
vddh-regulator (2.5V).
Only supported on the AR8031.
vddio-regulator:
type: object
description:
Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
$ref: /schemas/regulator/regulator.yaml
vddh-regulator:
type: object
description:
Dummy subnode to model the external connection of the PHY VDDH
regulator to VDDIO.
$ref: /schemas/regulator/regulator.yaml
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/net/qca-ar803x.h>
ethernet {
#address-cells = <1>;
#size-cells = <0>;
phy-mode = "rgmii-id";
ethernet-phy@0 {
reg = <0>;
qca,clk-out-frequency = <125000000>;
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
};
- |
#include <dt-bindings/net/qca-ar803x.h>
ethernet {
#address-cells = <1>;
#size-cells = <0>;
phy-mode = "rgmii-id";
ethernet-phy@0 {
reg = <0>;
qca,clk-out-frequency = <50000000>;
qca,keep-pll-enabled;
vddio-supply = <&vddh>;
vddh: vddh-regulator {
};
};
};