blob: ccdd9e3820d737016724135bb527b03a49130ad5 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Actions Semi S500 SoC pinmux & GPIO controller
maintainers:
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
description: |
Pinmux & GPIO controller manages pin multiplexing & configuration including
GPIO function selection & GPIO attributes configuration. Please refer to
pinctrl-bindings.txt in this directory for common binding part and usage.
properties:
compatible:
const: actions,s500-pinctrl
reg:
items:
- description: GPIO Output + GPIO Input + GPIO Data
- description: Multiplexing Control
- description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control
- description: PAD Drive Capacity Select
minItems: 1
maxItems: 4
clocks:
maxItems: 1
gpio-controller: true
gpio-ranges:
maxItems: 1
'#gpio-cells':
description:
Specifies the pin number and flags, as defined in
include/dt-bindings/gpio/gpio.h
const: 2
interrupt-controller: true
'#interrupt-cells':
description:
Specifies the pin number and flags, as defined in
include/dt-bindings/interrupt-controller/irq.h
const: 2
interrupts:
description:
One interrupt per each of the 5 GPIO ports supported by the controller,
sorted by port number ascending order.
minItems: 5
maxItems: 5
patternProperties:
'-pins$':
type: object
patternProperties:
'^(.*-)?pinmux$':
type: object
description:
Pinctrl node's client devices specify pin muxes using subnodes,
which in turn use the standard properties below.
$ref: pinmux-node.yaml#
properties:
groups:
description:
List of gpio pin groups affected by the functions specified in
this subnode.
items:
oneOf:
- enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
nand_ceb3_mfp]
minItems: 1
maxItems: 32
function:
description:
Specify the alternative function to be configured for the
given gpio pin groups.
enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
mipi_csi, nand, spdif, ts, lcd0]
required:
- groups
- function
additionalProperties: false
'^(.*-)?pinconf$':
type: object
description:
Pinctrl node's client devices specify pin configurations using
subnodes, which in turn use the standard properties below.
$ref: pincfg-node.yaml#
properties:
groups:
description:
List of gpio pin groups affected by the drive-strength property
specified in this subnode.
items:
oneOf:
- enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
sens0_ckout_drv, uart3_all_drv]
minItems: 1
maxItems: 32
pins:
description:
List of gpio pins affected by the bias-pull-* and
input-schmitt-* properties specified in this subnode.
items:
oneOf:
- enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
pkg2, pkg3]
minItems: 1
maxItems: 64
bias-pull-up: true
bias-pull-down: true
drive-strength:
description:
Selects the drive strength for the specified pins, in mA.
enum: [2, 4, 8, 12]
input-schmitt-enable: true
input-schmitt-disable: true
additionalProperties: false
additionalProperties: false
required:
- compatible
- reg
- clocks
- gpio-controller
- gpio-ranges
- '#gpio-cells'
- interrupt-controller
- '#interrupt-cells'
- interrupts
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
pinctrl: pinctrl@b01b0000 {
compatible = "actions,s500-pinctrl";
reg = <0xb01b0000 0x40>, <0xb01b0040 0x10>,
<0xb01b0060 0x18>, <0xb01b0080 0xc>;
clocks = <&cmu 55>;
gpio-controller;
gpio-ranges = <&pinctrl 0 0 132>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
mmc0_pins: mmc0-pins {
pinmux {
groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
"sd0_cmd_mfp", "sd0_clk_mfp";
function = "sd0";
};
drv-pinconf {
groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
drive-strength = <8>;
};
bias-pinconf {
pins = "sd0_d0", "sd0_d1", "sd0_d2",
"sd0_d3", "sd0_cmd";
bias-pull-up;
};
};
};
...