| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher |
| * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland |
| * Copyright (c) 2002, 2003 Tuukka Toivonen |
| * Copyright (c) 2008 Erik Andrén |
| * |
| * P/N 861037: Sensor HDCS1000 ASIC STV0600 |
| * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 |
| * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express |
| * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam |
| * P/N 861075-0040: Sensor HDCS1000 ASIC |
| * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB |
| * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web |
| */ |
| |
| /* |
| * The spec file for the PB-0100 suggests the following for best quality |
| * images after the sensor has been reset : |
| * |
| * PB_ADCGAINL = R60 = 0x03 (3 dec) : sets low reference of ADC |
| to produce good black level |
| * PB_PREADCTRL = R32 = 0x1400 (5120 dec) : Enables global gain changes |
| through R53 |
| * PB_ADCMINGAIN = R52 = 0x10 (16 dec) : Sets the minimum gain for |
| auto-exposure |
| * PB_ADCGLOBALGAIN = R53 = 0x10 (16 dec) : Sets the global gain |
| * PB_EXPGAIN = R14 = 0x11 (17 dec) : Sets the auto-exposure value |
| * PB_UPDATEINT = R23 = 0x02 (2 dec) : Sets the speed on |
| auto-exposure routine |
| * PB_CFILLIN = R5 = 0x0E (14 dec) : Sets the frame rate |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include "stv06xx_pb0100.h" |
| |
| struct pb0100_ctrls { |
| struct { /* one big happy control cluster... */ |
| struct v4l2_ctrl *autogain; |
| struct v4l2_ctrl *gain; |
| struct v4l2_ctrl *exposure; |
| struct v4l2_ctrl *red; |
| struct v4l2_ctrl *blue; |
| struct v4l2_ctrl *natural; |
| }; |
| struct v4l2_ctrl *target; |
| }; |
| |
| static struct v4l2_pix_format pb0100_mode[] = { |
| /* low res / subsample modes disabled as they are only half res horizontal, |
| halving the vertical resolution does not seem to work */ |
| { |
| 320, |
| 240, |
| V4L2_PIX_FMT_SGRBG8, |
| V4L2_FIELD_NONE, |
| .sizeimage = 320 * 240, |
| .bytesperline = 320, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = PB0100_CROP_TO_VGA |
| }, |
| { |
| 352, |
| 288, |
| V4L2_PIX_FMT_SGRBG8, |
| V4L2_FIELD_NONE, |
| .sizeimage = 352 * 288, |
| .bytesperline = 352, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 0 |
| } |
| }; |
| |
| static int pb0100_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct gspca_dev *gspca_dev = |
| container_of(ctrl->handler, struct gspca_dev, ctrl_handler); |
| struct sd *sd = (struct sd *)gspca_dev; |
| struct pb0100_ctrls *ctrls = sd->sensor_priv; |
| int err = -EINVAL; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUTOGAIN: |
| err = pb0100_set_autogain(gspca_dev, ctrl->val); |
| if (err) |
| break; |
| if (ctrl->val) |
| break; |
| err = pb0100_set_gain(gspca_dev, ctrls->gain->val); |
| if (err) |
| break; |
| err = pb0100_set_exposure(gspca_dev, ctrls->exposure->val); |
| break; |
| case V4L2_CTRL_CLASS_USER + 0x1001: |
| err = pb0100_set_autogain_target(gspca_dev, ctrl->val); |
| break; |
| } |
| return err; |
| } |
| |
| static const struct v4l2_ctrl_ops pb0100_ctrl_ops = { |
| .s_ctrl = pb0100_s_ctrl, |
| }; |
| |
| static int pb0100_init_controls(struct sd *sd) |
| { |
| struct v4l2_ctrl_handler *hdl = &sd->gspca_dev.ctrl_handler; |
| struct pb0100_ctrls *ctrls; |
| static const struct v4l2_ctrl_config autogain_target = { |
| .ops = &pb0100_ctrl_ops, |
| .id = V4L2_CTRL_CLASS_USER + 0x1000, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Automatic Gain Target", |
| .max = 255, |
| .step = 1, |
| .def = 128, |
| }; |
| static const struct v4l2_ctrl_config natural_light = { |
| .ops = &pb0100_ctrl_ops, |
| .id = V4L2_CTRL_CLASS_USER + 0x1001, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Natural Light Source", |
| .max = 1, |
| .step = 1, |
| .def = 1, |
| }; |
| |
| ctrls = kzalloc(sizeof(*ctrls), GFP_KERNEL); |
| if (!ctrls) |
| return -ENOMEM; |
| |
| v4l2_ctrl_handler_init(hdl, 6); |
| ctrls->autogain = v4l2_ctrl_new_std(hdl, &pb0100_ctrl_ops, |
| V4L2_CID_AUTOGAIN, 0, 1, 1, 1); |
| ctrls->exposure = v4l2_ctrl_new_std(hdl, &pb0100_ctrl_ops, |
| V4L2_CID_EXPOSURE, 0, 511, 1, 12); |
| ctrls->gain = v4l2_ctrl_new_std(hdl, &pb0100_ctrl_ops, |
| V4L2_CID_GAIN, 0, 255, 1, 128); |
| ctrls->red = v4l2_ctrl_new_std(hdl, &pb0100_ctrl_ops, |
| V4L2_CID_RED_BALANCE, -255, 255, 1, 0); |
| ctrls->blue = v4l2_ctrl_new_std(hdl, &pb0100_ctrl_ops, |
| V4L2_CID_BLUE_BALANCE, -255, 255, 1, 0); |
| ctrls->natural = v4l2_ctrl_new_custom(hdl, &natural_light, NULL); |
| ctrls->target = v4l2_ctrl_new_custom(hdl, &autogain_target, NULL); |
| if (hdl->error) { |
| kfree(ctrls); |
| return hdl->error; |
| } |
| sd->sensor_priv = ctrls; |
| v4l2_ctrl_auto_cluster(5, &ctrls->autogain, 0, false); |
| return 0; |
| } |
| |
| static int pb0100_probe(struct sd *sd) |
| { |
| u16 sensor; |
| int err; |
| |
| err = stv06xx_read_sensor(sd, PB_IDENT, &sensor); |
| |
| if (err < 0) |
| return -ENODEV; |
| if ((sensor >> 8) != 0x64) |
| return -ENODEV; |
| |
| pr_info("Photobit pb0100 sensor detected\n"); |
| |
| sd->gspca_dev.cam.cam_mode = pb0100_mode; |
| sd->gspca_dev.cam.nmodes = ARRAY_SIZE(pb0100_mode); |
| |
| return 0; |
| } |
| |
| static int pb0100_start(struct sd *sd) |
| { |
| int err, packet_size, max_packet_size; |
| struct usb_host_interface *alt; |
| struct usb_interface *intf; |
| struct gspca_dev *gspca_dev = (struct gspca_dev *)sd; |
| struct cam *cam = &sd->gspca_dev.cam; |
| u32 mode = cam->cam_mode[sd->gspca_dev.curr_mode].priv; |
| |
| intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); |
| alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); |
| if (!alt) |
| return -ENODEV; |
| |
| if (alt->desc.bNumEndpoints < 1) |
| return -ENODEV; |
| |
| packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); |
| |
| /* If we don't have enough bandwidth use a lower framerate */ |
| max_packet_size = sd->sensor->max_packet_size[sd->gspca_dev.curr_mode]; |
| if (packet_size < max_packet_size) |
| stv06xx_write_sensor(sd, PB_ROWSPEED, BIT(4)|BIT(3)|BIT(1)); |
| else |
| stv06xx_write_sensor(sd, PB_ROWSPEED, BIT(5)|BIT(3)|BIT(1)); |
| |
| /* Setup sensor window */ |
| if (mode & PB0100_CROP_TO_VGA) { |
| stv06xx_write_sensor(sd, PB_RSTART, 30); |
| stv06xx_write_sensor(sd, PB_CSTART, 20); |
| stv06xx_write_sensor(sd, PB_RWSIZE, 240 - 1); |
| stv06xx_write_sensor(sd, PB_CWSIZE, 320 - 1); |
| } else { |
| stv06xx_write_sensor(sd, PB_RSTART, 8); |
| stv06xx_write_sensor(sd, PB_CSTART, 4); |
| stv06xx_write_sensor(sd, PB_RWSIZE, 288 - 1); |
| stv06xx_write_sensor(sd, PB_CWSIZE, 352 - 1); |
| } |
| |
| if (mode & PB0100_SUBSAMPLE) { |
| stv06xx_write_bridge(sd, STV_Y_CTRL, 0x02); /* Wrong, FIXME */ |
| stv06xx_write_bridge(sd, STV_X_CTRL, 0x06); |
| |
| stv06xx_write_bridge(sd, STV_SCAN_RATE, 0x10); |
| } else { |
| stv06xx_write_bridge(sd, STV_Y_CTRL, 0x01); |
| stv06xx_write_bridge(sd, STV_X_CTRL, 0x0a); |
| /* larger -> slower */ |
| stv06xx_write_bridge(sd, STV_SCAN_RATE, 0x20); |
| } |
| |
| err = stv06xx_write_sensor(sd, PB_CONTROL, BIT(5)|BIT(3)|BIT(1)); |
| gspca_dbg(gspca_dev, D_STREAM, "Started stream, status: %d\n", err); |
| |
| return (err < 0) ? err : 0; |
| } |
| |
| static int pb0100_stop(struct sd *sd) |
| { |
| struct gspca_dev *gspca_dev = (struct gspca_dev *)sd; |
| int err; |
| |
| err = stv06xx_write_sensor(sd, PB_ABORTFRAME, 1); |
| |
| if (err < 0) |
| goto out; |
| |
| /* Set bit 1 to zero */ |
| err = stv06xx_write_sensor(sd, PB_CONTROL, BIT(5)|BIT(3)); |
| |
| gspca_dbg(gspca_dev, D_STREAM, "Halting stream\n"); |
| out: |
| return (err < 0) ? err : 0; |
| } |
| |
| /* FIXME: Sort the init commands out and put them into tables, |
| this is only for getting the camera to work */ |
| /* FIXME: No error handling for now, |
| add this once the init has been converted to proper tables */ |
| static int pb0100_init(struct sd *sd) |
| { |
| stv06xx_write_bridge(sd, STV_REG00, 1); |
| stv06xx_write_bridge(sd, STV_SCAN_RATE, 0); |
| |
| /* Reset sensor */ |
| stv06xx_write_sensor(sd, PB_RESET, 1); |
| stv06xx_write_sensor(sd, PB_RESET, 0); |
| |
| /* Disable chip */ |
| stv06xx_write_sensor(sd, PB_CONTROL, BIT(5)|BIT(3)); |
| |
| /* Gain stuff...*/ |
| stv06xx_write_sensor(sd, PB_PREADCTRL, BIT(12)|BIT(10)|BIT(6)); |
| stv06xx_write_sensor(sd, PB_ADCGLOBALGAIN, 12); |
| |
| /* Set up auto-exposure */ |
| /* ADC VREF_HI new setting for a transition |
| from the Expose1 to the Expose2 setting */ |
| stv06xx_write_sensor(sd, PB_R28, 12); |
| /* gain max for autoexposure */ |
| stv06xx_write_sensor(sd, PB_ADCMAXGAIN, 180); |
| /* gain min for autoexposure */ |
| stv06xx_write_sensor(sd, PB_ADCMINGAIN, 12); |
| /* Maximum frame integration time (programmed into R8) |
| allowed for auto-exposure routine */ |
| stv06xx_write_sensor(sd, PB_R54, 3); |
| /* Minimum frame integration time (programmed into R8) |
| allowed for auto-exposure routine */ |
| stv06xx_write_sensor(sd, PB_R55, 0); |
| stv06xx_write_sensor(sd, PB_UPDATEINT, 1); |
| /* R15 Expose0 (maximum that auto-exposure may use) */ |
| stv06xx_write_sensor(sd, PB_R15, 800); |
| /* R17 Expose2 (minimum that auto-exposure may use) */ |
| stv06xx_write_sensor(sd, PB_R17, 10); |
| |
| stv06xx_write_sensor(sd, PB_EXPGAIN, 0); |
| |
| /* 0x14 */ |
| stv06xx_write_sensor(sd, PB_VOFFSET, 0); |
| /* 0x0D */ |
| stv06xx_write_sensor(sd, PB_ADCGAINH, 11); |
| /* Set black level (important!) */ |
| stv06xx_write_sensor(sd, PB_ADCGAINL, 0); |
| |
| /* ??? */ |
| stv06xx_write_bridge(sd, STV_REG00, 0x11); |
| stv06xx_write_bridge(sd, STV_REG03, 0x45); |
| stv06xx_write_bridge(sd, STV_REG04, 0x07); |
| |
| /* Scan/timing for the sensor */ |
| stv06xx_write_sensor(sd, PB_ROWSPEED, BIT(4)|BIT(3)|BIT(1)); |
| stv06xx_write_sensor(sd, PB_CFILLIN, 14); |
| stv06xx_write_sensor(sd, PB_VBL, 0); |
| stv06xx_write_sensor(sd, PB_FINTTIME, 0); |
| stv06xx_write_sensor(sd, PB_RINTTIME, 123); |
| |
| stv06xx_write_bridge(sd, STV_REG01, 0xc2); |
| stv06xx_write_bridge(sd, STV_REG02, 0xb0); |
| return 0; |
| } |
| |
| static int pb0100_dump(struct sd *sd) |
| { |
| return 0; |
| } |
| |
| static int pb0100_set_gain(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| int err; |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct pb0100_ctrls *ctrls = sd->sensor_priv; |
| |
| err = stv06xx_write_sensor(sd, PB_G1GAIN, val); |
| if (!err) |
| err = stv06xx_write_sensor(sd, PB_G2GAIN, val); |
| gspca_dbg(gspca_dev, D_CONF, "Set green gain to %d, status: %d\n", |
| val, err); |
| |
| if (!err) |
| err = pb0100_set_red_balance(gspca_dev, ctrls->red->val); |
| if (!err) |
| err = pb0100_set_blue_balance(gspca_dev, ctrls->blue->val); |
| |
| return err; |
| } |
| |
| static int pb0100_set_red_balance(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| int err; |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct pb0100_ctrls *ctrls = sd->sensor_priv; |
| |
| val += ctrls->gain->val; |
| if (val < 0) |
| val = 0; |
| else if (val > 255) |
| val = 255; |
| |
| err = stv06xx_write_sensor(sd, PB_RGAIN, val); |
| gspca_dbg(gspca_dev, D_CONF, "Set red gain to %d, status: %d\n", |
| val, err); |
| |
| return err; |
| } |
| |
| static int pb0100_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| int err; |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct pb0100_ctrls *ctrls = sd->sensor_priv; |
| |
| val += ctrls->gain->val; |
| if (val < 0) |
| val = 0; |
| else if (val > 255) |
| val = 255; |
| |
| err = stv06xx_write_sensor(sd, PB_BGAIN, val); |
| gspca_dbg(gspca_dev, D_CONF, "Set blue gain to %d, status: %d\n", |
| val, err); |
| |
| return err; |
| } |
| |
| static int pb0100_set_exposure(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| int err; |
| |
| err = stv06xx_write_sensor(sd, PB_RINTTIME, val); |
| gspca_dbg(gspca_dev, D_CONF, "Set exposure to %d, status: %d\n", |
| val, err); |
| |
| return err; |
| } |
| |
| static int pb0100_set_autogain(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| int err; |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct pb0100_ctrls *ctrls = sd->sensor_priv; |
| |
| if (val) { |
| if (ctrls->natural->val) |
| val = BIT(6)|BIT(4)|BIT(0); |
| else |
| val = BIT(4)|BIT(0); |
| } else |
| val = 0; |
| |
| err = stv06xx_write_sensor(sd, PB_EXPGAIN, val); |
| gspca_dbg(gspca_dev, D_CONF, "Set autogain to %d (natural: %d), status: %d\n", |
| val, ctrls->natural->val, err); |
| |
| return err; |
| } |
| |
| static int pb0100_set_autogain_target(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| int err, totalpixels, brightpixels, darkpixels; |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| /* Number of pixels counted by the sensor when subsampling the pixels. |
| * Slightly larger than the real value to avoid oscillation */ |
| totalpixels = gspca_dev->pixfmt.width * gspca_dev->pixfmt.height; |
| totalpixels = totalpixels/(8*8) + totalpixels/(64*64); |
| |
| brightpixels = (totalpixels * val) >> 8; |
| darkpixels = totalpixels - brightpixels; |
| err = stv06xx_write_sensor(sd, PB_R21, brightpixels); |
| if (!err) |
| err = stv06xx_write_sensor(sd, PB_R22, darkpixels); |
| |
| gspca_dbg(gspca_dev, D_CONF, "Set autogain target to %d, status: %d\n", |
| val, err); |
| |
| return err; |
| } |